Works about WORKPIECES

Results: 1458

Enhancing laser cutting quality of stainless steel 201 by controlling dross formation and surface roughness using multi-factor experimental design.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 7, p. 458, doi. 10.12913/22998624/204716

By:

Zabon, Anwar Hassan;
Abbas, Tahseen Fadhil;
Bedan, Aqeel Sabree

Publication type:

Article

Effect of non-equal channel angular pressing on milling-induced residual stress.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 1, p. 617, doi. 10.1007/s00170-025-15947-4

By:

Gholami, Mohammad Hadi;
Honarpisheh, Mohammad;
Amini, Saeid

Publication type:

Article

Tool path generation algorithm for three-axis machining freeform surface using double-arc milling cutter.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 139, n. 1, p. 575, doi. 10.1007/s00170-025-15918-9

By:

Fan, Mengchao;
Li, Xuguang;
Liu, Xianli;
Yue, Caixu;
Wang, Chengjun;
Wang, Guan

Publication type:

Article

Fluorescence-Based Measurement of Workpiece Geometry and Temperature in Laser Chemical Machining.

Published in:

Nanomanufacturing & Metrology, 2025, v. 8, n. 1, p. 1, doi. 10.1007/s41871-025-00257-w

By:

Niehaves, Claudia;
Tausendfreund, Andreas;
Bouraoui, Yasmine;
Lu, Yang;
Radel, Tim;
Fischer, Andreas

Publication type:

Article

Condition-Aware Autoencoder and Transfer Learning-Based Estimation of Milling Cutting Forces from Spindle Vibration Signals.

Published in:

Machines, 2025, v. 13, n. 6, p. 461, doi. 10.3390/machines13060461

By:

Ryu, Je-Doo;
Lee, Jungmin;
Kim, Sung-Ryul;
Lee, Min Cheol

Publication type:

Article

VSG-FC: A Combined Virtual Sample Generation and Feature Construction Model for Effective Prediction of Surface Roughness in Polishing Processes.

Published in:

Micromachines, 2025, v. 16, n. 6, p. 622, doi. 10.3390/mi16060622

By:

Yang, Dapeng;
Ding, Shenggao;
Pan, Lifang;
Xu, Yong

Publication type:

Article

Study of Electroerosion Processing by Vibroacoustic Diagnostic Methods.

Published in:

Measurement Techniques, 2015, v. 58, n. 8, p. 878, doi. 10.1007/s11018-015-0811-2

By:

Grigor'ev, S.;
Kozochkin, M.;
Fedorov, S.;
Porvatov, A.;
Okun'kova, A.

Publication type:

Article

Use of a Measurement Information System to Increase the Precision with which Thin-Walled Parts are Machined on Numerically Controlled Milling Machines.

Published in:

Measurement Techniques, 2014, v. 56, n. 10, p. 1155, doi. 10.1007/s11018-014-0348-9

By:

Isaev, A.;
Kozochkin, M.

Publication type:

Article

大倍径可变阻尼镗杆设计及减振特性分析.

Published in:

Machine Tool & Hydraulics, 2024, v. 52, n. 18, p. 123, doi. 10.3969/j.issn.1001-3881.2024.18.017

By:

关彦齐;
于广滨;
朱金鸣;
徐东辉;
胡清明;
孙丹丹

Publication type:

Article

通用立铣刀真实切削轨迹下五轴铣削力计算.

Published in:

Machine Tool & Hydraulics, 2023, v. 51, n. 19, p. 58, doi. 10.3969/j.issn.1001-3881.2023.19.009

By:

落海伟;
汤伟民;
张俊

Publication type:

Article

柔性边界约束细长件车削动力学辨识与稳定性分析.

Published in:

Machine Tool & Hydraulics, 2023, v. 51, n. 12, p. 51, doi. 10.3969/j.issn.1001-3881.2023.12.009

By:

李建国;
刘洋;
徐国胜

Publication type:

Article

基于机器视觉的机器人作业目标定位.

Published in:

Machine Tool & Hydraulics, 2023, v. 51, n. 11, p. 72, doi. 10.3969/j.issn.1001-3881.2023.11.012

By:

徐征;
翟季青;
陈永强;
李原;
乐文静

Publication type:

Article

锥台工件点云拟合算法研究.

Published in:

Machine Tool & Hydraulics, 2023, v. 51, n. 10, p. 1, doi. 10.3969/j.issn.1001-3881.2023.10.001

By:

王佳裕;
李培波;
赵言正

Publication type:

Article

CAN THE INCREASED FEED BE BENEFICIAL ON THE SURFACE QUALITY IN TANGENTIAL TURNING?

Published in:

Multidiszciplináris Tudományok, 2024, v. 14, n. 4, p. 66, doi. 10.35925/j.multi.2024.4.6

By:

Sztankovics, István

Publication type:

Article

ANALYSIS OF TILTING TABLE WITH PARALLEL KINEMATICS.

Published in:

Multidiszciplináris Tudományok, 2021, v. 11, n. 5, p. 225, doi. 10.35925/j.multi.2021.5.23

By:

Tüske, István;
Hegedűs, György

Publication type:

Article

Development of Theoretical and Numerical Framework for Selecting the Cutting Process Parameters for Turned Slender Parts.

Published in:

Journal Européen des Systèmes Automatisés, 2023, v. 56, n. 5, p. 833, doi. 10.18280/jesa.560514

By:

Ezugwu, Chinedu A. K.;
Fayomi, Ojo S. I.;
Onifade, Morakinyo K.;
Adeoye, Adeyinka O. M.;
Okokpujie, Imhade P.

Publication type:

Article

Modelling the Effects of Workpiece Flexibility on Cutting Performance in Turning Operations.

Published in:

Journal Européen des Systèmes Automatisés, 2023, v. 56, n. 4, p. 615, doi. 10.18280/jesa.560411

By:

Ezugwu, Chinedu A. K.;
Fayomi, Ojo S. I.;
Onifade, Morakinyo K.;
Adeoye, Adeyinka O. M.;
Okokpujie, Imhade P.

Publication type:

Article

Multi Objective Study on Machining Characteristics of AISI H-11 Tool Steel Prepared by Different Processing Techniques.

Published in:

Journal Européen des Systèmes Automatisés, 2021, v. 54, n. 2, p. 243, doi. 10.18280/jesa.540206

By:

Margabandu, Vignesh;
Radhakrishnan, Ramanujam

Publication type:

Article

Design and Fabrication of a Continuous Polishing Machine.

Published in:

Journal Européen des Systèmes Automatisés, 2019, v. 52, n. 5, p. 485, doi. 10.18280/jesa.520507

By:

Vijayan, Neethu;
Raj, Surya Akshar;
Muthirulan, Veerakumar;
Sachidananda, Krishnamurthy H.

Publication type:

Article

Technological Parameters of Belt Grinding Process of Hard Steel.

Published in:

Mechanics & Mechanical Engineering, 2017, v. 21, n. 4, p. 843

By:

HAMDI, Amine;
ALIOUANE, Toufik;
BOUZID, Djamel

Publication type:

Article

A method for workpiece surface small-defect detection based on CutMix and YOLOv3.

Published in:

Journal of Southeast University (English Edition), 2021, v. 37, n. 2, p. 128, doi. 10.3969/j.issn.1003-7985.2021.02.002

By:

Xing Junjie;
Jia Minping;
Xu Feiyun;
Hu Jianzhong

Publication type:

Article

Study of Kinematic and Deformation Parameters of Rolling of Compressor Blade Workpieces.

Published in:

Metallophysics & Advanced Technologies / Metallofizika i Novejsie Tehnologii, 2023, v. 45, n. 5, p. 631, doi. 10.15407/mfint.45.05.0631

By:

Chigirinsky, V. V.;
Kresanov, Yu. S.;
Volokitina, I. Ye.

Publication type:

Article

Stress State of 6063 Cold-Formed Aluminium Alloy Workpieces in a Closed Die.

Published in:

Metallophysics & Advanced Technologies / Metallofizika i Novejsie Tehnologii, 2021, v. 43, n. 7, p. 959, doi. 10.15407/mfint.43.07.0959

By:

Ashkeyev, Zh.;
Abishkenov, M.

Publication type:

Article

تأثیر تابع پتانسیل بر شبیه سازی دینامیک مولکولی فرآیند ماشین کاری نانومتری سیلیکون تک کریستال

Published in:

Journal of Applied & Computational Sciences in Mechanics, 2019, v. 30, n. 2, p. 17, doi. 10.22067/fum-mech.v30i.2.71972

By:

ذ٘ بًدس ػبهل کلخ سَاى;
ه شْداد حٍذس

Publication type:

Article

Three-Dimensional Synthesis of Manufacturing Tolerances Based on Analysis Using the Ascending Approach.

Published in:

Mathematics (2227-7390), 2022, v. 10, n. 2, p. 203, doi. 10.3390/math10020203

By:

Ayadi, Badreddine;
Ben Said, Lotfi;
Boujelbene, Mohamed;
Betrouni, Sid Ali

Publication type:

Article

Tool Wear and Surface Integrity of γ-TiAl Cryogenic Coolant Machining at Various Cutting Speed Levels.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 6, p. 238, doi. 10.3390/lubricants11060238

By:

Wang, Xiangyu;
Zhang, Xiaoxia;
Pan, Duo;
Niu, Jintao;
Fu, Xiuli;
Qiao, Yang

Publication type:

Article

The Influence of Tool Texture on Friction and Lubrication in Strip Reduction Testing.

Published in:

Lubricants (2075-4442), 2017, v. 5, n. 1, p. 3, doi. 10.3390/lubricants5010003

By:

Sulaiman, Mohd Hafis;
Christiansen, Peter;
Bay, Niels

Publication type:

Article

Real-Time High Dynamic Equalization Industrial Imaging Enhancement Based on Fully Convolutional Network.

Published in:

Electronics (2079-9292), 2025, v. 14, n. 3, p. 547, doi. 10.3390/electronics14030547

By:

Shi, Chenbo;
Ren, Xiangqun;
Mo, Yuanzheng;
Zhang, Guodong;
Yan, Shaojia;
Wang, Yu;
Zhu, Changsheng

Publication type:

Article

Integrating Sensor Systems and Signal Processing for Sustainable Production: Analysis of Cutting Tool Condition.

Published in:

Electronics (2079-9292), 2024, v. 13, n. 1, p. 185, doi. 10.3390/electronics13010185

By:

Kozłowski, Edward;
Antosz, Katarzyna;
Sęp, Jarosław;
Prucnal, Sławomir

Publication type:

Article

A Deep Learning-Enhanced Stereo Matching Method and Its Application to Bin Picking Problems Involving Tiny Cubic Workpieces.

Published in:

Electronics (2079-9292), 2023, v. 12, n. 18, p. 3978, doi. 10.3390/electronics12183978

By:

Yoshizawa, Masaru;
Motegi, Kazuhiro;
Shiraishi, Yoichi

Publication type:

Article

Side-Milling-Force Model Considering Tool Runout and Workpiece Deformation.

Published in:

Electronics (2079-9292), 2023, v. 12, n. 4, p. 968, doi. 10.3390/electronics12040968

By:

Xie, Miao;
Yu, Xinli;
Bao, Wei;
Liu, Changfu;
Xia, Min

Publication type:

Article

Chatter Detection in Variable Cutting Depth Side Milling Using VMD and Vibration Characteristics Analysis.

Published in:

Electronics (2079-9292), 2022, v. 11, n. 22, p. 3779, doi. 10.3390/electronics11223779

By:

Zhao, Na;
Su, Yingxin;
Wang, Shijuan;
Xia, Min;
Liu, Changfu

Publication type:

Article

5G-Based Multi-Sensor Platform for Monitoring of Workpieces and Machines: Prototype Hardware Design and Firmware.

Published in:

Electronics (2079-9292), 2022, v. 11, n. 10, p. N.PAG, doi. 10.3390/electronics11101619

By:

Mohanram, Praveen;
Passarella, Alice;
Zattoni, Elena;
Padovani, Roberto;
König, Niels;
Schmitt, Robert H.

Publication type:

Article

Development of a Grinding Tool with Contact-Force Control Capability.

Published in:

Electronics (2079-9292), 2022, v. 11, n. 5, p. 685, doi. 10.3390/electronics11050685

By:

Lin, Yu-Heng;
Liu, Ming-Wei;
Lin, Pei-Chun

Publication type:

Article

Modeling the Static and Dynamic Behaviors of a Large Heavy-Duty Lathe Machine under Rated Loads.

Published in:

Computation, 2022, v. 10, n. 12, p. 207, doi. 10.3390/computation10120207

By:

Lin, Chien-Yu;
Luh, Yuan-Ping;
Lin, Wei-Zhu;
Lin, Bo-Chen;
Hung, Jui-Pin

Publication type:

Article

Prediction of 3-dimensional heat treatment model during the friction stir spot welding of AA 6061.

Published in:

Journal of Engineering Research (2307-1877), 2023, v. 11, n. 1B, p. 290, doi. 10.36909/jer.12317

By:

Jaiswal, Ritesh;
Singh, Rajnish;
Rizvi, Saadat Ali

Publication type:

Article

SIMULATION OF GRASPING PRISMATIC WORKPIECES BY A PNEUMATICALLY DRIVEN 3-FINGER ROBOTIC GRIPPER.

Published in:

Robotica & Management, 2017, v. 22, n. 2, p. 13

By:

Miclosina, Calin-Octavian;
Korka, Zoltan-Iosif;
Cojocaru, Vasile;
Gogoneata, Mariana-Aliteia

Publication type:

Article

Comparison of Analytical and Experimental Force in Cylindrical Workpiece Drawing Process.

Published in:

Tribology in Industry, 2021, v. 43, n. 1, p. 1, doi. 10.24874/ti.1000.11.20.02

By:

Fanidi, O.;
Kostryukov, A. A.;
Shchedrin, A. V.;
Ignatkin, I. Yu.

Publication type:

Article

IMPROVING THE QUALITY OF FORGINGS BASED ON UPSETTING THE WORKPIECES WITH CONCAVE FACETS.

Published in:

Eastern-European Journal of Enterprise Technologies, 2018, v. 95, n. 1, p. 16, doi. 10.15587/1729-4061.2018.142674

By:

Markov, O.;
Zlygoriev, V.;
Hrudkina, N.;
Shevtsov, S.

Publication type:

Article

DEVELOPMENT OF THE EVALUATION MODEL OF TECHNOLOGICAL PARAMETERS OF SHAPING WORKPIECES FROM POWDER MATERIALS.

Published in:

Eastern-European Journal of Enterprise Technologies, 2017, p. 9, doi. 10.15587/1729-4061.2017.59418

By:

Iskovych-Lototsky, R.;
Zelinska, O.;
Ivanchuk, Y.;
Veselovska, N.

Publication type:

Article

Vibrations of Flat-End Cutter Entering Workpiece Process: Modeling, Simulations, and Experiments.

Published in:

Shock & Vibration, 2018, p. 1, doi. 10.1155/2018/8419013

By:

Luo, Ming;
Yao, Qi

Publication type:

Article

EXPERIMENTAL INVESTIGATION AND OPTIMIZATION OF MACHINING PARAMETERS IN MILLING OF AL6351 USING HYBRID - ARTIFICIAL BEE COLONY ALGORITHM.

Published in:

i-Manager's Journal on Mechanical Engineering, 2019, v. 9, n. 3, p. 9, doi. 10.26634/jme.9.3.16059

By:

HEMA, P.;
PADMANABHAN, G.;
ESWAR, T.

Publication type:

Article

OPTIMIZATION OF PROCESS PARAMETERS ON DIE-SINKING EDM WITH TWIN TOOL SETUP USING TAGUCHI METHOD.

Published in:

i-Manager's Journal on Mechanical Engineering, 2018, v. 8, n. 3, p. 31, doi. 10.26634/jme.8.3.14736

By:

KUMAR, B. VINOD;
DEVI, D. J. JYOTHSNA;
REDDY, M. CHANDRA SEKHARA

Publication type:

Article

STATISTICAL ANALYSIS OF WELDING CURRENT DEPENDENCIES AND THE CLAMPING FORCE AFTER WEAR OF USED ELECTRODES AT WELDING THROUGH THE PRESSURE IN POINTS.

Published in:

Annals of 'Constantin Brancusi' University of Targu-Jiu. Juridical Science Series, 2016, n. 4, p. 178

By:

Alin, Stancioiu

Publication type:

Article

The clamping selection method to reduce the vibration of large-size workpieces during the face milling process.

Published in:

Bulletin of the Polish Academy of Sciences: Technical Sciences, 2024, v. 72, n. 2, p. 1, doi. 10.24425/bpasts.2024.148840

By:

KALIŃSKI, Krzysztof J.;
GALEWSKI, Marek A.;
STAWICKA-MORAWSKA, Natalia;
JEMIELNIAK, Krzysztof;
MAZUR, Michał R.

Publication type:

Article

35 - Acoustic Emission for in situ monitoring of laser processing.

Published in:

Journal of Acoustic Emission, 2018, v. 35, p. S11

By:

SHEVCHIK, Sergey;
Quang Tri LE;
MEYLAN, Bastian;
WASMER, Kilian

Publication type:

Article

Design of a Fixture for Additively Manufactured Workpieces Using Topology Optimization.

Published in:

International Journal of Automation Technology, 2025, v. 19, n. 1, p. 4, doi. 10.20965/ijat.2025.p0004

By:

Kitagawa, Hayato;
Furuta, Kozo;
Yoshida, Yasuka;
Yamaji, Iwao;
Kono, Daisuke

Publication type:

Article

Improving Machined Accuracy Under a Constant Feed Speed Vector at the End-Milling Point by Estimating Machining Force in Tool Approach.

Published in:

International Journal of Automation Technology, 2024, v. 18, n. 3, p. 444, doi. 10.20965/ijat.2024.p0444

By:

Suzuki, Takamaru;
Hirogaki, Toshiki;
Aoyama, Eiichi

Publication type:

Article

Investigation of Drilling Holes in CFRP for Aircraft Using cBN Electroplated Ball End Mill Using Helical Interpolation Motion.

Published in:

International Journal of Automation Technology, 2024, v. 18, n. 2, p. 169, doi. 10.20965/ijat.2024.p0169

By:

Hamamoto, Sora;
Hirogaki, Toshiki;
Aoyama, Eiichi;
Fujiwara, Kazuna;
Taketani, Masashi

Publication type:

Article

High-Precision Grinding of Thin and Large Optical Workpieces with the Kinematic Support.

Published in:

International Journal of Automation Technology, 2024, v. 18, n. 1, p. 39, doi. 10.20965/ijat.2024.p0039

By:

Hashigaya, Takeshi;
Kino, Masaru;
Takahashi, Keisuke;
Kurita, Mikio

Publication type:

Article