Works matching DE "MECHANICAL properties of condensed matter"

Results: 3746

Comparison of Reflective Properties of Materials Exposed to Ultraviolet-C Radiation.

Published in:

Journal of Research of the National Institute of Standards & Technology, 2021, v. 126, p. 1, doi. 10.6028/jres.126.017

By:

Stojalowski, Pawel de Sternberg;
Fairfoull, Jonathan

Publication type:

Article

Quantifying Drying and Carbonation in Calcium Silicate-Cement Systems Using Neutron Radiography.

Published in:

ACI Materials Journal, 2022, v. 119, n. 2, p. 231, doi. 10.14359/51734401

By:

Moradllo, M. Khanzadeh;
Ghantous, R. M.;
Quinn, S.;
Aktan, V.;
Reese, S.;
Weiss, W. J.

Publication type:

Article

Effect of Curing Method on Material Properties of Very-Early-Strength Latex-Modified Concrete Used in Partial- Depth Repair.

Published in:

ACI Materials Journal, 2022, v. 119, n. 2, p. 105, doi. 10.14359/51734223

By:

Dong-Hyuk Kim;
Woo-Sung Yum;
Jun-Young Park;
Moon-Gyu Choi;
Jin-Hoon Jeong

Publication type:

Article

Mechanical Behavior and Design Properties of Ultra-High- Performance Concrete.

Published in:

ACI Materials Journal, 2022, v. 119, n. 1, p. 181, doi. 10.14359/51734194

By:

El-Helou, Rafic G.;
Haber, Zachary B.;
Graybeal, Benjamin A.

Publication type:

Article

Design of Alkali-Activated Slag-Fly Ash Concrete Mixtures Using Machine Learning.

Published in:

ACI Materials Journal, 2020, v. 117, n. 5, p. 263, doi. 10.14359/51727019

By:

Gunasekera, C.;
Lokuge, W.;
Keskic, M.;
Raj, N.;
Law, D. W.;
Setunge, S.

Publication type:

Article

Robustness of Ultra-High-Performance Concrete to Changes in Material Temperature.

Published in:

ACI Materials Journal, 2020, v. 117, n. 4, p. 47, doi. 10.14359/51724613

By:

Valipour, Mahdi;
Khayat, Kamal H.

Publication type:

Article

Crushing Behavior and Crushing Strengths of Low-Density Foam Concrete.

Published in:

ACI Materials Journal, 2020, v. 117, n. 2, p. 43, doi. 10.14359/51722394

By:

Yu Song;
Lange, David A.

Publication type:

Article

Extension of Powers-Brownyard Model to Pastes Containing Supplementary Cementitious Materials.

Published in:

ACI Materials Journal, 2019, v. 116, n. 5, p. 205, doi. 10.14359/51714466

By:

Glosser, Deborah;
Azad, Vahid Jafari;
Suraneni, Prannoy;
Isgor, O. Burkan;
Weiss, W. Jason

Publication type:

Article

A device for studying the thermophysical properties of bulk textile materials and their packages by the regular mode method in air.

Published in:

Man-Made Textiles in India, 2020, v. 48, n. 10, p. 342

By:

Tashpulatov, Salikh S.;
Sabirova, Ziyoda A.;
Muminova, Umida T.;
Cherunova, Irina V.;
Nemirova, Lyubov F.

Publication type:

Article

Characterizations of bottom wear fabrics for drapability.

Published in:

Man-Made Textiles in India, 2020, v. 48, n. 1, p. 15

By:

Ukey, Pravin;
Kadole, P. V.

Publication type:

Article

Exploring the Structural and Dielectric Properties of Polymer Films Incorporating Carbon-Based Nanomaterials.

Published in:

International Journal of Nanoscience, 2021, v. 20, n. 2, p. N.PAG, doi. 10.1142/S0219581X21500198

By:

Deepak, A.;
Cherian, Pheba;
Jenkins, D. F. L.

Publication type:

Article

Dielectric Properties of Epoxy Resin Composites Based on Magnetic Nanoparticles.

Published in:

International Journal of Nanoscience, 2019, v. 18, n. 3/4, p. N.PAG, doi. 10.1142/S0219581X19400180

By:

Meisak, D.;
Macutkevic, J.;
Banys, J.;
Bychanok, D.;
Kuzhir, P.

Publication type:

Article

Densification of timber: a review on the process, material properties, and application.

Published in:

Journal of Wood Science, 2022, v. 68, n. 1, p. 1, doi. 10.1186/s10086-022-02028-3

By:

Cabral, John Paul;
Kafle, Bidur;
Subhani, Mahbube;
Reiner, Johannes;
Ashraf, Mahmud

Publication type:

Article

Effect of desk materials on affective states and cognitive performance.

Published in:

Journal of Wood Science, 2020, v. 66, n. 1, p. 1, doi. 10.1186/s10086-020-01890-3

By:

Lipovac, Dean;
Podrekar, Nastja;
Burnard, Michael D.;
Šarabon, Nejc

Publication type:

Article

Lateral-Torsional Buckling of a Bidirectional Exponentially Graded Thin-Walled C-Shaped Beam.

Published in:

Mechanics of Composite Materials, 2022, v. 58, n. 1, p. 53, doi. 10.1007/s11029-022-10011-8

By:

Rezaiee-Pajand, M.;
Masoodi, A. R.;
Alepaighambar, A.

Publication type:

Article

Influence of a Silica Aerogel Filler on the Mechanical, Thermal, and Physical Properties of Flax/Epoxy Composite.

Published in:

Mechanics of Composite Materials, 2022, v. 58, n. 2, p. 271, doi. 10.1007/s11029-022-10028-z

By:

Chandrasekar, M.;
Shahroze, R. M.;
Kumar, T. Senthil Muthu;
Senthilkumar, K.;
Ishak, M. R.;
Rajini, N.;
Siengchin, S.

Publication type:

Article

Increasing the Bearing Capacity of Composite Plates in the Zone of Bolted Joints by Using Curvilinear Trajectories and a Variable Fiber Volume Fraction.

Published in:

Mechanics of Composite Materials, 2021, v. 57, n. 3, p. 287, doi. 10.1007/s11029-021-09954-1

By:

Malakhov, A. V.;
Polilov, A. N.;
Li, D.;
Tian, X.

Publication type:

Article

Buckling Characteristics of FGM Plates Subjected to Linearly Varying In-Plane Loads.

Published in:

Mechanics of Composite Materials, 2021, v. 57, n. 1, p. 69, doi. 10.1007/s11029-021-09934-5

By:

Uymaz, B.

Publication type:

Article

Process-Induced Deformation of L-Shaped Laminates: Analysis of Tool–Part Interaction.

Published in:

Mechanics of Composite Materials, 2021, v. 56, n. 6, p. 789, doi. 10.1007/s11029-021-09924-7

By:

Yuan, Z.;
Yang, G.;
Yang, Z.;
Feng, Y.;
Li, S.;
Li, Y.;
Tong, X.;
Song, D.

Publication type:

Article

Numerical Modeling of Large Deformations for Porous Metals and Identification of Carcass Deformation Diagrams.

Published in:

Mechanics of Composite Materials, 2021, v. 56, n. 6, p. 747, doi. 10.1007/s11029-021-09920-x

By:

Bazhenov, V. G.;
Zhestkov, М. N.

Publication type:

Article

Optimizing the Thickness/Stiffness Distribution of Infinitely Wide Porous FGM Plates Subjected To Supersonic Flutter Constraints.

Published in:

Mechanics of Composite Materials, 2021, v. 56, n. 6, p. 713, doi. 10.1007/s11029-021-09917-6

By:

Muc, A.

Publication type:

Article

Material Properties of Basalt-Fiber-Reinforced Gypsum-Based Composites Made with Metakaolin and Silica Sand.

Published in:

Mechanics of Composite Materials, 2020, v. 56, n. 3, p. 379, doi. 10.1007/s11029-020-09889-z

By:

Yildizel, S. A.

Publication type:

Article

Real-Time Characterization of Pultrusion Processes with a Temperature Control.

Published in:

Mechanics of Composite Materials, 2020, v. 56, n. 2, p. 135, doi. 10.1007/s11029-020-09868-4

By:

Barkanov, E.;
Akishin, P.;
Namsone, E.;
Bondarchuk, A.;
Pantelelis, N.

Publication type:

Article

Lateral-Torsional Stability Analysis of a Simply Supported Axially Functionally Graded Beam with a Tapered I-Section.

Published in:

Mechanics of Composite Materials, 2020, v. 56, n. 1, p. 39, doi. 10.1007/s11029-020-09859-5

By:

Soltani, M.;
Asgarian, B.

Publication type:

Article

Nonlinear Buckling and Postbuckling of a FGM Toroidal Shell Segment Under a Torsional Load in a Thermal Environment Within Reddy's Third-Order Shear Deformation Shell Theory.

Published in:

Mechanics of Composite Materials, 2019, v. 55, n. 4, p. 467, doi. 10.1007/s11029-019-09826-9

By:

Vuong, Pham Minh;
Duc, Nguyen Dinh

Publication type:

Article

Mechanical Properties and Biocompatibility of a Biomaterial on the Basis of Natural Hydroxyapatite and an Endodentic Cement1.

Published in:

Mechanics of Composite Materials, 2019, v. 55, n. 3, p. 413, doi. 10.1007/s11029-019-09822-z

By:

Rupeks, L.;
Filipenkov, V.;
Vitins, V.;
Knets, I.

Publication type:

Article

A Comparison of Closed-Form and Finite-Element Solutions for the Free Vibration of Hybrid Cross-Ply Laminated Plates.

Published in:

Mechanics of Composite Materials, 2019, v. 55, n. 2, p. 181, doi. 10.1007/s11029-019-09803-2

By:

Benhenni, M. A.;
Adim, B.;
Daouadji, T. Hassaine;
Abbès, B.;
Abbès, F.;
Li, Y.;
Bouzidane, A.

Publication type:

Article

Crashworthiness Experiment and Simulation Analysis of Composite Thin-Walled Circular Tubes Under Axial Crushing.

Published in:

Mechanics of Composite Materials, 2019, v. 55, n. 1, p. 121, doi. 10.1007/s11029-019-09797-x

By:

Mou, H. L.;
Xie, J.;
Su, X.;
Feng, Z. Y.

Publication type:

Article

Low-Cost Water Soluble Silicon Quantum Dots and Biocompatible Fluorescent Composite Films.

Published in:

Particle & Particle Systems Characterization, 2021, v. 38, n. 11, p. 1, doi. 10.1002/ppsc.202100173

By:

Guitao Du;
Guoqian Li;
Shibo Qiu;
Linghong Liu;
Yuewei Zheng;
Xinghai Liu

Publication type:

Article

Strain‐Induced Magnetism in MSi2N4 (M = V, Cr): A First‐Principles Study.

Published in:

Annalen der Physik, 2021, v. 533, n. 12, p. 1, doi. 10.1002/andp.202100273

By:

Li, Yingmei;
Wang, Jing;
Yang, Guochun;
Liu, Yong

Publication type:

Article

Rheological, mechanical, thermal and electrical properties of UHMWPE/CNC composites.

Published in:

Cellulose, 2021, v. 28, n. 17, p. 10953, doi. 10.1007/s10570-021-04227-5

By:

Duraccio, Donatella;
Arrigo, Rossella;
Strongone, Valentina;
Capra, Pier Paolo;
Malucelli, Giulio

Publication type:

Article

Easy way to prepare dispersible CNC dry powder by precipitation and conventional evaporation.

Published in:

Cellulose, 2021, v. 28, n. 15, p. 9661, doi. 10.1007/s10570-021-04123-y

By:

Zhu, Zirui;
Wang, Wenbo;
Wang, Xiaohui;
Zhao, Xin;
Xia, Nannan;
Kong, Fangong;
Wang, Shoujuan

Publication type:

Article

Layer-by-layer assembly of cationic guar gum, cellulose nanocrystals and hydroxypropyl methylcellulose based multilayered composite films.

Published in:

Cellulose, 2021, v. 28, n. 13, p. 8445, doi. 10.1007/s10570-021-04064-6

By:

Saini, Arun;
Sharma, Deepak;
Xia, Yuanyuan;
Saini, Aman;
You, Xiangyu;
Su, Ying;
Chen, Lihong;
Yadav, Chandravati;
Li, Xinping

Publication type:

Article

The role of fiber-matrix compatibility in vacuum processed natural fiber/epoxy biocomposites.

Published in:

Cellulose, 2021, v. 28, n. 12, p. 7845, doi. 10.1007/s10570-021-04055-7

By:

Pabón Rojas, Jonathan Javier;
Ramón Valencia, Bladimir Azdrubal;
Bolívar Osorio, Francisco Javier;
Ramirez, Daniel

Publication type:

Article

Exploring digital image correlation technique for the analysis of the tensile properties of all-cellulose composites.

Published in:

Cellulose, 2021, v. 28, n. 7, p. 4165, doi. 10.1007/s10570-021-03807-9

By:

Chen, Feng;
Bouvard, Jean-Luc;
Sawada, Daisuke;
Pradille, Christophe;
Hummel, Michael;
Sixta, Herbert;
Budtova, Tatiana

Publication type:

Article

Characterisation and durability of contemporary unsized Xuan paper.

Published in:

Cellulose, 2021, v. 28, n. 2, p. 1011, doi. 10.1007/s10570-020-03554-3

By:

Luo, Yujia;
Cigić, Irena Kralj;
Wei, Quan;
Strlič, Matija

Publication type:

Article

High aspect ratio cellulose nanofibrils from macroalgae Laminaria hyperborea cellulose extract via a zero-waste low energy process.

Published in:

Cellulose, 2020, v. 27, n. 14, p. 7997, doi. 10.1007/s10570-020-03223-5

By:

Onyianta, Amaka J.;
O'Rourke, Dominic;
Sun, Dongyang;
Popescu, Carmen-Mihaela;
Dorris, Mark

Publication type:

Article

Dry Bacterial Cellulose and Carboxymethyl Cellulose formulations with interfacial-active performance: processing conditions and redispersion.

Published in:

Cellulose, 2020, v. 27, n. 11, p. 6505, doi. 10.1007/s10570-020-03211-9

By:

Martins, Daniela;
de Carvalho Ferreira, Domingos;
Gama, Miguel;
Dourado, Fernando

Publication type:

Article

Electrocatalytic oxygen reduction over Co@Co3O4/N-doped porous carbon derived from pyrolysis of ZIF-8/67 on cellulose nanofibers.

Published in:

Cellulose, 2020, v. 27, n. 5, p. 2723, doi. 10.1007/s10570-019-02937-5

By:

Lee, Yu-Ri;
Yoo, Hyeonseok;
Choi, Jinsub;
Ahn, Wha-Seung

Publication type:

Article

A revised solid-state NMR method to assess the crystallinity of cellulose.

Published in:

Cellulose, 2019, v. 26, n. 17, p. 8993, doi. 10.1007/s10570-019-02718-0

By:

Sparrman, Tobias;
Svenningsson, Leo;
Sahlin-Sjövold, Karin;
Nordstierna, Lars;
Westman, Gunnar;
Bernin, Diana

Publication type:

Article

Processing nanocellulose to bulk materials: a review.

Published in:

Cellulose, 2019, v. 26, n. 13/14, p. 7585, doi. 10.1007/s10570-019-02642-3

By:

Wang, Qianqian;
Yao, Qian;
Liu, Jun;
Sun, Jianzhong;
Zhu, Qianqian;
Chen, Honglei

Publication type:

Article

Chemical versus physical grafting of photoluminescent amino-functional carbon dots onto transparent nematic nanocellulose gels and aerogels.

Published in:

Cellulose, 2019, v. 26, n. 13/14, p. 7781, doi. 10.1007/s10570-019-02619-2

By:

Quraishi, Sakeena;
Plappert, Sven F.;
Grießer, Thomas;
Gindl-Altmutter, Wolfgang;
Liebner, Falk W.

Publication type:

Article

On the Stability of Pt‐Based Catalysts in HBr/Br2 Solution.

Published in:

Helvetica Chimica Acta, 2021, v. 104, n. 7, p. 1, doi. 10.1002/hlca.202100082

By:

Liu, Qiang;
Meissel, Hubert;
Sadykov, Ilia;
Jones, Simon;
Van Dijk, Nick;
Rzepka, Przemyslaw;
Artiglia, Luca;
Ranocchiari, Marco;
Bokhoven, Jeroen A.

Publication type:

Article

Full thickness quadriceps tendon grafts with bone had similar material properties to bone-patellar tendon-bone and a four-strand semitendinosus grafts: a biomechanical study.

Published in:

Knee Surgery, Sports Traumatology, Arthroscopy, 2022, v. 30, n. 5, p. 1786, doi. 10.1007/s00167-021-06738-x

By:

Strauss, Marc J.;
Miles, Jon W.;
Kennedy, Mitchell L.;
Dornan, Grant J.;
Moatshe, Gilbert;
Lind, Martin;
Engebretsen, Lars;
LaPrade, Robert F.

Publication type:

Article

Passive and active muscle elasticity of medial gastrocnemius is related to performance in sprinters.

Published in:

European Journal of Applied Physiology, 2022, v. 122, n. 2, p. 447, doi. 10.1007/s00421-021-04848-5

By:

Yamazaki, Kazuhiko;
Inoue, Kakeru;
Miyamoto, Naokazu

Publication type:

Article

Research on Direct Tensile Experiment of Rock-Concrete Interface Using Acoustic Emission Technology.

Published in:

Russian Journal of Nondestructive Testing, 2021, v. 57, n. 12, p. 1082, doi. 10.1134/S106183092112010X

By:

Xiaojing Li;
Zhang, Jianguo;
Chen, Xudong;
Lv, Mingying;
Li, Kejin

Publication type:

Article

Sensing of Ellipsoidal Inclusions in a Biomedical Ti–6Al–4V Alloy by Magnetic Means.

Published in:

Russian Journal of Nondestructive Testing, 2019, v. 55, n. 10, p. 785, doi. 10.1134/S1061830919100024

By:

Hector Carreón

Publication type:

Article

Get 30-2018, State Primary Standard of Hardness According to the Rockwell and Super Rockwell Scales.

Published in:

Measurement Techniques, 2018, v. 61, n. 8, p. 745, doi. 10.1007/s11018-018-1495-1

By:

Aslanyan, E. G.;
Aslanyan, A. E.;
Gavrilkin, S. M.;
Doinikov, A. S.;
Sorokina, P. V.;
Shchipunov, A. N.

Publication type:

Article

Study of the Nonuniformity of Hardness Gauges for Transfer of the Martens Scale in Nanoindentation.

Published in:

Measurement Techniques, 2015, v. 58, n. 1, p. 46, doi. 10.1007/s11018-015-0661-y

By:

Aslanyan, A.;
Aslanyan, E.;
Gavrilkin, S.;
Shchipunov, A.

Publication type:

Article

Axisymmetric Resonance Vibration and Vibration Heating of a Viscoelastic Cylindrical Shell Compliant to Shear with Piezoelectric Sensors.

Published in:

Journal of Mathematical Sciences, 2022, v. 261, n. 1, p. 59, doi. 10.1007/s10958-022-05737-8

By:

Kyrychok, І. F.;
Zhuk, Ya. О.;
Chernyushok, О. А.;
Tarasov, А. P.

Publication type:

Article