Works matching DE "MATERIAL plasticity"

Results: 5000

Model test on dynamic response of coral sand in island dredging airport under wave, tidal and aircraft landing load.

Published in:

Marine Georesources & Geotechnology, 2025, v. 43, n. 7, p. 1232, doi. 10.1080/1064119X.2024.2397379

By:

Wang, Jianxiu;
Cao, Ansheng;
Song, Dongsheng;
Feng, Bo;
Zhang, Hua;
Li, Huboqiang;
Long, Yanxia;
Ye, Zhenhua

Publication type:

Article

Observation of the formation and sharpening of geometrically necessary boundaries.

Published in:

2025

By:

Cretton, Adam André William;
Zelenika, Albert;
Frankus, Felix;
Yıldırım, Can;
Detlefs, Carsten;
Grumsen, Flemming Bjerg;
Winther, Grethe;
Poulsen, Henning Friis

Publication type:

Report

Superior plastic flow stability of self-patterned carbide – amorphous ceramic nanostructures.

Published in:

2025

By:

Wu, Wenqian;
Shao, Lin;
Li, Nan;
Li, Lin;
Wang, Jian

Publication type:

Report

Atomistic Simulations of Mechanical Properties and Deformation Mechanism of Gradient Nanograined α‐Ti.

Published in:

Physica Status Solidi (B), 2025, v. 262, n. 4, p. 1, doi. 10.1002/pssb.202400454

By:

Alduma, Adam Ibrahem Abdalrsoul;
Zhang, Yanqing;
Gao, Qing;
Yang, Xu;
Zhang, Wei;
Li, Wei;
Wang, Qi;
Ren, Junqiang;
Lu, Xuefeng

Publication type:

Article

An experimental study into the net cross-sectional failure of damaged plates with holes for different steel grades and temperatures.

Published in:

Fracture & Structural Integrity, 2025, n. 73, p. 256, doi. 10.3221/IGF-ESIS.73.17

By:

Leonetti, Davide;
van Schuppen, Bo;
Jahanian, Maryam;
Mobder, Sumya;
Snijder, H. H. (Bert)

Publication type:

Article

Study of strengthening mechanisms in Al-Cu and Al-Cu-Mg systems subjected to plastic deformation and T6 treatment.

Published in:

Canadian Metallurgical Quarterly, 2025, v. 64, n. 3, p. 853, doi. 10.1080/00084433.2024.2393982

By:

García-Hernández, L. J.;
Garay-Reyes, C. G.;
Ruiz-Esparza-Rodríguez, M. A.;
García-Aguirre, K. A.;
Estrada-Guel, I.;
González, S.;
Mendoza-Duarte, J. M.;
Camarillo-Cisneros, J.;
Guía-Tello, J. C.;
Martinez-Garcia, A.;
Martínez-Sánchez, R.

Publication type:

Article

Contrasts in Habitat Characteristics and Life History Patterns of Oncorhynchus mykiss in California's Central Coast and Central Valley.

Published in:

Transactions of the American Fisheries Society, 2012, v. 141, n. 3, p. 747, doi. 10.1080/00028487.2012.675902

By:

Sogard, Susan M.;
Merz, Joseph E.;
Satterthwaite, William H.;
Beakes, Michael P.;
Swank, David R.;
Collins, Erin M.;
Titus, Robert G.;
Mangel, Marc

Publication type:

Article

Performance Study of a Novel J Energy-Absorbing Bolt under Controlled Dynamic Loads.

Published in:

Rock Mechanics & Rock Engineering, 2025, v. 58, n. 6, p. 6455, doi. 10.1007/s00603-025-04436-5

By:

Wang, Chang;
Zhao, Xingdong;
Zhu, Qiankun;
Dai, Bibo;
Qin, Shaolong

Publication type:

Article

Experimental Investigation on Strength and Failure Characteristics of Composite Rock in Contact Zone under Biaxial Compression.

Published in:

Rock Mechanics & Rock Engineering, 2025, v. 58, n. 6, p. 6619, doi. 10.1007/s00603-025-04418-7

By:

Wang, Weiqi;
Feng, Xia-Ting;
Wang, Qihu;
Yang, Chengxiang;
Kong, Rui

Publication type:

Article

Flexural behavior and design of high-strength I-shaped steel-UHPC composite beams.

Published in:

Advances in Structural Engineering, 2025, v. 28, n. 10, p. 1877, doi. 10.1177/13694332251319094

By:

Lai, Zhichao;
Yao, Pengyu;
Yang, Xiaoqiang;
Li, Shihui;
Zhao, Qiu

Publication type:

Article

Microstructure and Impact Resistance of 'Sandwich' Composite Coating by Laser Cladding.

Published in:

Journal of Thermal Spray Technology, 2025, v. 34, n. 5, p. 1873, doi. 10.1007/s11666-025-02002-7

By:

Li, Yunfeng;
Qiu, Yajie;
Shi, Yan;
Jiang, Guangjun;
Bai, Pucun

Publication type:

Article

Time Dependent Load Capacity of the Press Fit.

Published in:

Technical Journal / Tehnički Glasnik, 2025, v. 19, n. 3, p. 434, doi. 10.31803/tg-20250115224222

By:

Močilnik, Vinko;
Gubeljak, Nenad;
Predan, Jožef

Publication type:

Article

Tension–compression asymmetry of HCP CoCrFeMnNi high entropy alloy nanowires.

Published in:

Applied Physics A: Materials Science & Processing, 2025, v. 131, n. 6, p. 1, doi. 10.1007/s00339-025-08588-7

By:

Liu, Xuepeng;
Xie, Kaixin

Publication type:

Article

Numerical investigation on the compressive behavior of hierarchical granular piles.

Published in:

Earth, Planets & Space, 2025, v. 77, n. 1, p. 1, doi. 10.1186/s40623-025-02219-4

By:

Arakawa, Sota;
Furuichi, Mikito;
Nishiura, Daisuke

Publication type:

Article

Numerical method for hydraulic fracture propagation in a two-phase poroelastoplasticity model.

Published in:

Russian Journal of Numerical Analysis & Mathematical Modelling, 2025, v. 40, n. 3, p. 209, doi. 10.1515/rnam-2025-0017

By:

Terekhov, Kirill M.;
Vassilevski, Yuri V.

Publication type:

Article

Profilometry‐Based Indentation Plastometry Testing of Tungsten at High Temperature.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 12, p. 1, doi. 10.1002/adem.202500292

By:

Miller, James Rees;
McKeown, Philip John;
Qiu, Hillary;
Clyne, Trevor William

Publication type:

Article

Enhancement of Strength and Torque Capacity of Biodegradable MgNdZr Screws via Material Processing.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 12, p. 1, doi. 10.1002/adem.202500238

By:

Pavlenko, Dmytro;
Greshta, Viktor;
Dvirnyk, Yaroslav;
Vyshnepolskyi, Yevhen;
Schetinina, Myroslava;
Chornyi, Vladyslav

Publication type:

Article

Static Recrystallization Simulation of Interstitial Free‐Steel by Coupling Multi‐Phase‐Field and Crystal Plasticity Model Considering Dislocation Density Distribution.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 12, p. 1, doi. 10.1002/adem.202500117

By:

Rezvani, Alireza;
Ebrahimi, Ramin;
Bagherpour, Ebad

Publication type:

Article

Research Progress on Plastic Deformation Induced by HCP to FCC Phase Transformation in Hexagonal Close‐Packed Metals.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 12, p. 1, doi. 10.1002/adem.202402445

By:

Xiao, Guizhi;
Ma, Jinlei;
Cheng, Xumin;
Meng, Zhaolin;
Zhou, Zihao;
Li, Dongyang

Publication type:

Article

Analysis and optimization of injection molding for the part of EV charging equipment with NSGA-II and machine learning-enhanced RSM.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 11, p. 5457, doi. 10.1007/s00170-025-15847-7

By:

Jiang, Bing-yun;
Liu, Jun-lei;
Liu, Zhen-yu;
Liu, Hui;
Jiang, Hong

Publication type:

Article

Research on the effect of ultrasonic-electric pulse composite milling on the machining performance of tungsten alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 11, p. 5521, doi. 10.1007/s00170-025-15826-y

By:

Zhang, Xin;
Li, Zhanjie;
Jin, Gang;
Ma, Yuanhao;
Bian, Yipu;
Hu, Mengpan;
Li, Chong;
Luo, Shaokun

Publication type:

Article

Wear mechanism analysis of PCD tools during the cutting process of SiCp/Al with a 45% volume fraction using nanosecond pulsed laser-assisted cutting.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 11, p. 5645, doi. 10.1007/s00170-025-15818-y

By:

Lin, Jieqiong;
Kang, Mingshuo;
Gu, Yan;
Xi, Yuan;
Gao, Yinghuan;
Wu, Minglei;
Liang, Guangyu;
Xie, Lue

Publication type:

Article

高温作用下石英力学性质响应特征的分子模拟.

Published in:

Journal of China University of Petroleum, 2025, v. 49, n. 3, p. 116, doi. 10.3969/j.issn.1673-5005.2025.03.012

By:

赫文豪;
刘利;
张润青;
赵嵩卿;
李雪;
史怀忠;
刘子龙;
范高建;
李永昕

Publication type:

Article

HYBRID M.A. AND HOT FORGING MANUFACTURING PROCESS: MAKING PREFORMS BY LOCALIZED FUSION DEPOSITION OF MATERIALS USING UTP AF DUR 600 WIRE.

Published in:

Environmental & Social Management Journal / Revista de Gestão Social e Ambiental, 2025, v. 19, n. 5, p. 1, doi. 10.24857/rgsa.v19n5-139

By:

Ferreira, Carlos;
Schaeffer, Líiro;
Daleffe, Anderson;
Castelan, Jovani;
Casagrande, Henrique;
de March, Gilson

Publication type:

Article

Buckling and yielding interactions in pyramidal trusses: a comprehensive analytical and numerical investigation.

Published in:

Archive of Applied Mechanics, 2025, v. 95, n. 7, p. 1, doi. 10.1007/s00419-025-02862-z

By:

Silva, William T. M.;
Barrozo, Geovany F.;
Portela, A.

Publication type:

Article

基于纳米压痕实验的藻白云岩力学参数跨尺度评价方法.

Published in:

Natural Gas Industry, 2025, v. 45, n. 5, p. 124, doi. 10.3787/j.issn.1000-0976.2025.05.011

By:

李皋;
上官自然;
杨旭;
李红涛;
冯佳歆;
李明昊;
李泽

Publication type:

Article

Relationship of Megafracturing Expressed in the Relief of Southeast Kamchatka with Volcanism and Thermal Condition of the Upper Part of the Lithosphere.

Published in:

Izvestiya, Atmospheric & Oceanic Physics, 2024, v. 60, n. 11, p. 1416, doi. 10.1134/S0001433825700604

By:

Agibalov, A. O.;
Bergal-Kuvikas, O. V.;
Zaitsev, V. A.;
Sentsov, A. A.

Publication type:

Article

Polyurea composite coating with polyester–carbon fiber HAYs: tear properties, behavior, and damage mechanism.

Published in:

Journal of Materials Science, 2025, v. 60, n. 23, p. 9616, doi. 10.1007/s10853-025-11030-1

By:

Yu, Xia;
Ma, Yanxuan;
Zhang, Yun;
Wang, Peng;
Liu, Jin;
Zhang, Zhipeng;
Wang, Shuaifei;
Gao, Yuhua

Publication type:

Article

Damage Mechanisms of Stabilized/Solidified Sediments in Dry–Wet Cycles: Insights from Microporous Structure Evolution.

Published in:

Water (20734441), 2025, v. 17, n. 11, p. 1667, doi. 10.3390/w17111667

By:

Li, Keyao;
Luo, Yun;
Wang, Hongxing;
Liu, Wei;
Zhao, Tiantian;
Wu, Shangwei;
Ruan, Junhao;
Wu, Yanping

Publication type:

Article

Overcoming Low-Polarity Limitations in Polyphenylene Oxide Electrospinning: Chemical Functionalization and Polymer Hybridization for Interlaminar Toughening of Carbon Fiber Composites.

Published in:

Polymers (20734360), 2025, v. 17, n. 11, p. 1480, doi. 10.3390/polym17111480

By:

Huang, Yuan;
Wei, Yi;
Huang, Canyi;
Qiu, Yiping;
Gu, Bohong;
Yang, Bo

Publication type:

Article

A Testing Method for Small Specimen Bulging Test for Evaluating the Mechanical Property of High-Density Polyethylene.

Published in:

Polymers (20734360), 2025, v. 17, n. 11, p. 1425, doi. 10.3390/polym17111425

By:

Zhao, Bo;
Chen, Yunxiang;
Wang, Lixian;
Yu, Yuxin;
Dai, Qiang;
Li, Zaixin

Publication type:

Article

Analysis of the Rolling Process of Alloy 6082 on a Three-High Skew Rolling Mill.

Published in:

Materials (1996-1944), 2025, v. 18, n. 11, p. 2618, doi. 10.3390/ma18112618

By:

Sovetbayev, Rail;
Nugman, Yerik;
Shayakhmetov, Yerzhan;
Abilmazhinov, Yermek;
Kawalek, Anna;
Ozhmegov, Kirill

Publication type:

Article

Tensile Deformation and Transverse Strain Behavior of Carbon Black-UHMWPE Composites.

Published in:

Materials (1996-1944), 2025, v. 18, n. 11, p. 2542, doi. 10.3390/ma18112542

By:

Solberg, Peder C.;
Van Citters, Douglas W.

Publication type:

Article

Material Characterization and Stress-State-Dependent Failure Criteria of AASHTO M180 Guardrail Steel: Experimental and Numerical Investigation.

Published in:

Materials (1996-1944), 2025, v. 18, n. 11, p. 2523, doi. 10.3390/ma18112523

By:

Alomari, Qusai A.;
Yosef, Tewodros Y.;
Bielenberg, Robert W.;
Faller, Ronald K.;
Negahban, Mehrdad;
Zhang, Zesheng;
Li, Wenlong;
Humphrey, Brandt M.

Publication type:

Article

Study on Elastoplastic Damage and Crack Propagation Mechanisms in Rock Based on the Phase Field Method.

Published in:

Applied Sciences (2076-3417), 2025, v. 15, n. 11, p. 6206, doi. 10.3390/app15116206

By:

Zhang, Jie;
Qin, Guang;
Wang, Bin

Publication type:

Article

High temperature plasticity of titanium grade 4: Experimental investigation and constitutive modeling.

Published in:

Journal of Mechanical Science & Technology, 2025, v. 39, n. 6, p. 3105, doi. 10.1007/s12206-025-0418-8

By:

Koo, Sungyong;
Han, Jungmoo;
Kang, Taehoon;
Kim, Jinho;
Choi, Sungwook

Publication type:

Article

The Dual Role of Twinning Deformation in a Magnesium Alloy up to Very High Cycle Fatigue Regime.

Published in:

Fatigue & Fracture of Engineering Materials & Structures, 2025, v. 48, n. 6, p. 2759, doi. 10.1111/ffe.14643

By:

Chen, Rong;
Zhao, Jing‐Bo;
Li, De‐Jiang;
Zhu, Ming‐Liang;
Xuan, Fu‐Zhen

Publication type:

Article

Damage Analyses and Crack Propagation of Wire Drawing With Central Inclusion Under Different Compression Ratios.

Published in:

Fatigue & Fracture of Engineering Materials & Structures, 2025, v. 48, n. 6, p. 2743, doi. 10.1111/ffe.14637

By:

Ma, Ao;
Fang, Feng;
Li, Zhaoxia

Publication type:

Article

In Situ Observation of Small Crack Growth and Fatigue Life Modeling for In713C Ni‐Based Superalloy.

Published in:

Fatigue & Fracture of Engineering Materials & Structures, 2025, v. 48, n. 6, p. 2774, doi. 10.1111/ffe.14635

By:

Li, Xiao‐Long;
Liu, Yu‐Ke;
Wang, Zi‐Wei;
Chen, Rong;
Zhu, Ming‐Liang

Publication type:

Article

Fracture and Damage Analysis of Cement‐Stabilized Fine and Coarse Grain Soils Under Static and Cyclic Loading Using Chevron‐Notched SCB Specimen.

Published in:

Fatigue & Fracture of Engineering Materials & Structures, 2025, v. 48, n. 6, p. 2708, doi. 10.1111/ffe.14598

By:

Erarslan, Nazife;
Aliha, M. R. M.

Publication type:

Article

Study on energy dissipation law of vibration disturbance damaged Zhanjiang Formation structural clay.

Published in:

PLoS ONE, 2025, v. 20, n. 6, p. 1, doi. 10.1371/journal.pone.0325285

By:

Xie, Yanhua;
Tang, Bin;
Liu, Shuaiyu;
Zhang, Binghui

Publication type:

Article

Negative stiffness mechanical metamaterials based on curved beams for reusable shock isolation.

Published in:

International Journal of Smart & Nano Materials, 2025, v. 16, n. 2, p. 397, doi. 10.1080/19475411.2025.2506645

By:

Chen, Shuai;
Lian, Xu;
Liu, Xin;
Hu, Jiqiang;
Wang, Bing;
Xu, Jie;
Wu, Linzhi

Publication type:

Article

深远海养殖网箱挂网撑杆与主体结构连接处断裂过程数值分析.

Published in:

Fishery Modernization, 2025, v. 52, n. 2, p. 18, doi. 10.3969/j.issn.1007-9580.2025.02.003

By:

何城宽;
王宏;
孙鸣远;
黄大辉;
毛沛盛

Publication type:

Article

海原 8. 5 级特大地震诱发新堡村滑坡变形破坏特征分析.

Published in:

Science Technology & Engineering, 2025, v. 25, n. 15, p. 6230, doi. 10.12404/j.issn.1671-1815.2405297

By:

吴良杰;
薄景山;
陈转转

Publication type:

Article

循环荷载作用下温州海相软基土变形特性试验研究与数值模拟.

Published in:

Journal of Architecture & Civil Engineering, 2025, v. 42, n. 3, p. 183, doi. 10.19815/j.jace.2023.11073

By:

张莎莎;
郝智晨;
张天工;
王志丰;
徐建强

Publication type:

Article

含砾黏土地层钢筋笼扩大头锚杆承载特性研究.

Published in:

Journal of Architecture & Civil Engineering, 2025, v. 42, n. 3, p. 172, doi. 10.19815/j.jace.2023.09048

By:

张信贵;
田应志;
韩伟;
张懿丹;
潘政宇

Publication type:

Article

Characterisation of Primary Creep-Based Deformation Microstructure of Single-Phase Alloy Ti-6Al Using EBSD and ECCI.

Published in:

Integrated Ferroelectrics, 2025, v. 241, n. 1-3, p. 1, doi. 10.1080/10584587.2025.2482405

By:

Mukherjee, Shreya;
Sen, Mainak;
Ghosh, Atasi

Publication type:

Article

Effect of thermomechanical processing on structure and mechanical properties of WNiCo.

Published in:

Materialwissenschaft und Werkstoffechnik, 2025, v. 56, n. 5, p. 697, doi. 10.1002/mawe.202400354

By:

Walek, J.;
Kocich, R.;
Kunčická, L.;
Kopeček, J.

Publication type:

Article

Enhancing the High‐Temperature Rolling Contact Fatigue Performance of Carburizing 8620H Steel Through Ultrasonic Surface Rolling Process.

Published in:

Fatigue & Fracture of Engineering Materials & Structures, 2025, v. 48, n. 7, p. 3019, doi. 10.1111/ffe.14657

By:

Sun, Pengfei;
Zhong, Hao;
Li, Xiaoqiang;
Qu, Shengguan

Publication type:

Article

Effect of Shaped Film Cooling Hole Manufacturing Defects on the High‐Cycle Fatigue Behavior of a Ni‐Based Single‐Crystal Superalloy.

Published in:

Fatigue & Fracture of Engineering Materials & Structures, 2025, v. 48, n. 7, p. 2803, doi. 10.1111/ffe.14641

By:

Wang, Yue;
Jiang, Rong;
Chen, Mo;
Li, Xiaoyu;
Lu, Xuping;
Zha, Haiyong;
Song, Yingdong

Publication type:

Article