Works about FUEL additives

Results: 608

Performance and emission of a SI engine using different isopropanol/n-butanol/ethanol (IBE) and gasoline fuel blends: optimization of fuel additive formulation via response surface methodology (RSM).

Published in:

Clean Technologies & Environmental Policy, 2025, v. 27, n. 6, p. 2341, doi. 10.1007/s10098-024-02981-1

By:

Motaharnasab, Mohammad;
Sobati, Mohammad Amin;
Qasemian, Ali;
Saeedpour, Mohammad Reza

Publication type:

Article

Tribological Investigation of the Effects of Engine Oil Additives for Vintage Gasoline Engines.

Published in:

FME Transactions, 2025, v. 53, n. 1, p. 31, doi. 10.5937/fme2501031K

By:

Kuti, R.;
Papp, Cs.;
Tóth, M.;
Tóth, Á. D.

Publication type:

Article

Enhanced production of microbial levulinic acid through deletion of the levulinic acid transcriptional regulator (lvaR) in engineered Pseudomonas putida KT2440.

Published in:

Bioprocess & Biosystems Engineering, 2025, v. 48, n. 8, p. 1281, doi. 10.1007/s00449-025-03175-9

By:

Kim, Hyun Jin;
Kim, Byung Chan;
Lim, Gaeun;
Han, Yebin;
Jeong, Yunhee;
Kim, Hee Taek;
Jeon, Woo-Young;
Ahn, Jungoh;
Bhatia, Shashi Kant;
Yang, Yung-Hun

Publication type:

Article

High-Performance Multifunctional Fuel Additives Derived from Renewable Fatty Acids and Phosphazene.

Published in:

Journal of the American Oil Chemists' Society (JAOCS), 2017, v. 94, n. 8, p. 1111, doi. 10.1007/s11746-017-3010-2

By:

Khatri, Praveen K.;
Aila, Mounika;
Kukrety, Aruna;
Gupta, Piyush;
Saxena, Rakesh C.;
Singh, Raj K.;
Jain, Suman L.

Publication type:

Article

Lubricity-Enhancing Low-Temperature Diesel Fuel Additives.

Published in:

Journal of the American Oil Chemists' Society (JAOCS), 2012, v. 89, n. 3, p. 513, doi. 10.1007/s11746-011-1932-7

By:

Wang, Sunmin;
Shen, Jianheng;
Reaney, Martin

Publication type:

Article

Multidimensional GC using planar microfluidic devices for the characterization of phenolic antioxidants in fuels.

Published in:

Journal of Separation Science, 2013, v. 36, n. 17, p. 2738, doi. 10.1002/jssc.201300383

By:

Luong, Jim;
Gras, Ronda;
Cortes, Hernan J.;
Shellie, Robert A.

Publication type:

Article

Can process intensification improve process safety?

Published in:

Loss Prevention Bulletin, 2019, n. 269, p. 7

By:

Kavanagh, Thomas;
Sparks, Bradley;
Patel, Manthan;
Khunda, Deema;
Flores, Elosie

Publication type:

Article

Accident involving a runaway reaction.

Published in:

Loss Prevention Bulletin, 2018, n. 259, p. 2

By:

Carson, Phillip

Publication type:

Article

Enhanced 2,3-butanediol production in fed-batch cultures of free and immobilized Bacillus licheniformis DSM 8785.

Published in:

Applied Microbiology & Biotechnology, 2013, v. 97, n. 15, p. 6715, doi. 10.1007/s00253-013-4981-z

By:

Jurchescu, Ileana-Maria;
Hamann, Jan;
Zhou, Xiye;
Ortmann, Tim;
Kuenz, Anja;
Prüße, Ulf;
Lang, Siegmund

Publication type:

Article

An Investigation of the Void Structure of Lightweight Concrete Containing Waste Undersize Pumice Additive Using Nondestructive Methods.

Published in:

Russian Journal of Nondestructive Testing, 2021, v. 57, n. 8, p. 679, doi. 10.1134/S1061830921080040

By:

Erenson, C.;
Kalkan, M.

Publication type:

Article

Catalytic Technologies for Renewable Biomass Conversion.

Published in:

Advanced Sustainable Systems, 2020, v. 4, n. 10, p. 1, doi. 10.1002/adsu.202000171

By:

Longlong Ma;
Sels, Bert F.

Publication type:

Article

STUDY OF THE EFFECT OF COMPLEX ADDITIVES THAT INCREASE THE OCTANE NUMBER AND ACT AS INHIBITORS FOR AUTOMOTIVE GASOLINES ON A COPPER PLATE.

Published in:

Austrian Journal of Technical & Natural Sciences, 2025, n. 1/2, p. 10, doi. 10.29013/AJT-25-1.2-10-13

By:

Jumanazaro'g'li, Akhmedov Orif;
Bakhromovich, Fayziev Jakhongir;
Soyibnazarovich, Beknazarov Hasan;
Turapovich, Djalilov Abdulahat

Publication type:

Article

Lead in the marine environment: concentrations and effects on invertebrates.

Published in:

Ecotoxicology, 2022, v. 31, n. 2, p. 194, doi. 10.1007/s10646-021-02504-4

By:

Botté, A.;
Seguin, C.;
Nahrgang, J.;
Zaidi, M.;
Guery, J.;
Leignel, V.

Publication type:

Article

Use of the mathematical model of the ignition system to analyze the spark discharge, including the destruction of spark plug electrodes.

Published in:

Open Physics, 2018, v. 16, n. 1, p. 57, doi. 10.1515/phys-2018-0011

By:

Różowicz, Sebastian

Publication type:

Article

Characterization of Gasoline by H Nuclear Magnetic Resonance and Chemometrics.

Published in:

Analytical Letters, 2017, v. 50, n. 11, p. 1767, doi. 10.1080/00032719.2016.1249877

By:

Ruschel, Carla F. C.;
Marcelo, Marcelo C. A.;
dos Santos, Francisco P.;
Ferrão, Marco F.

Publication type:

Article

Evaluation of the Role of Lubricant Additives in Emission Control.

Published in:

Lubricants (2075-4442), 2022, v. 10, n. 12, p. 362, doi. 10.3390/lubricants10120362

By:

Shao, Huifang;
Roos, Joseph W.;
Remias, Joseph E.

Publication type:

Article

Fuel-Lubricant Interactions: Critical Review of Recent Work.

Published in:

Lubricants (2075-4442), 2021, v. 9, n. 9, p. 92, doi. 10.3390/lubricants9090092

By:

Taylor, Robert Ian

Publication type:

Article

Synthesis of manganese–tin oxide microparticles by the solvothermal method and study of application as a catalyst and additive.

Published in:

Environmental Technology, 2021, v. 42, n. 8, p. 1187, doi. 10.1080/09593330.2019.1660414

By:

Khan, Shanza Rauf;
Naeem, Areeba;
Jamil, Saba;
Islam Aqib, Amjad;
Ashraf Janjua, Muhammad Ramzan Saeed

Publication type:

Article

Experimental Study on Performance, Emissions and Combustion Characteristics of PFI Spark Ignition Engine Fueled with E30 Equivalent Binary and Ternary GEM Blends.

Published in:

INCAS Bulletin, 2020, v. 12, n. 3, p. 101, doi. 10.13111/2066-8201.2020.12.3.8

By:

FAROOQ, Sk.;
KUMAR, D. VINAY

Publication type:

Article

Influence of Renewable Fuels and Nanoparticles Additives on Engine Performance and Soot Nanoparticles Characteristics.

Published in:

International Journal of Renewable Energy Development, 2022, v. 11, n. 4, p. 1068, doi. 10.14710/ijred.2022.45294

By:

Fayad, Mohammed A.;
Abed, Azher M.;
Omran, Salman H.;
Jaber, Alaa Abdulhady;
Radhi, Amerah A.;
Dhahad, Hayder A.;
Chaichan, Miqdam T.;
Yusaf, Talal

Publication type:

Article

Investigation of waste cooking oil–diesel blend with copper oxide additives as fuel for diesel engine under variations in compression ratio.

Published in:

International Journal of Energy & Environmental Engineering, 2023, v. 14, n. 4, p. 791, doi. 10.1007/s40095-022-00549-7

By:

Chatur, Madhuri G.;
Maheshwari, Anil;
Campli, Srinidhi

Publication type:

Article

Investigation of role of urea in morphologically controlled synthesis of calcium‐bismuth bimetallic nanoparticles from chicken egg shells and its catalytic and fuel additive applications.

Published in:

Journal of the Chinese Chemical Society, 2019, v. 66, n. 12, p. 1628, doi. 10.1002/jccs.201900076

By:

Khan, Shanza Rauf;
Jamil, Saba;
Zahid, Muhammad;
Shahid, Muhammad

Publication type:

Article

Investigation exhaust emissions and performance characteristics of a diesel engine by using addition of nanoparticles to diesel fuel.

Published in:

Journal of Power Technologies, 2020, v. 100, n. 2, p. 129

By:

Nozari, Vali;
Beheshti, Babak;
Ghobadian, Barat;
Borghei, Saied Ali Mohammad

Publication type:

Article

Effect of kinematic viscosity variation with blended-oil biodiesel on engine performance and exhaust emission in a power tiller engine.

Published in:

Environmental Engineering Research, 2020, v. 25, n. 6, p. 946, doi. 10.4491/eer.2019.358

By:

Duk Gam Woo;
Tae Han Kim

Publication type:

Article

Prospects of Biodiesel production by Alkali-based transesterification from Jatropha curcas and waste oil.

Published in:

International Journal of Pharmacy & Life Sciences, 2013, v. 4, n. 11, p. 3093

By:

Tiwari, Seema;
Shrivastava, Stuti;
Verma, Urmila;
Arnold, Rashmi;
Saxena, Arti;
Chaudhari, Ratnesh

Publication type:

Article

STUDIES ON THE REDUCTION OF ROAD VEHICLE POLLUTION.

Published in:

Research Journal of Agricultural Science, 2024, v. 56, n. 2, p. 77

By:

DUMA COPCEA, Anisoara;
MIHUT, Casiana;
NIȚĂ, L.;
LATO, K. I.;
COZMA, Antoanela;
POPA, D.;
OKROS, A.;
MAZARE, V.;
DRĂGAN, A. M.;
MOHACS, S.;
BERES, L.;
BURDEȚ, Anișoara

Publication type:

Article

The Effect of Cerium Oxide Nanoparticle Fuel Additives on Diesel Engine Performance and Emissions.

Published in:

Jordan Journal of Agricultural Sciences, 2016, v. 12, n. 1, p. 261, doi. 10.12816/0030367

By:

Abdullah, Mudhafar Kareem

Publication type:

Article

Effect of Diethyl Carbonate as Additive to Waste Plastic Oil on Performance and Emission of a Diesel Engine.

Published in:

Oriental Journal of Chemistry, 2020, v. 36, n. 1, p. 189, doi. 10.13005/ojc/360125

By:

BRIDJESH, PAPPULA;
GEETHA, NARAYANAN KANNAIYAN

Publication type:

Article

Crude palm oil as a complementary fuel for power generation in Amazonia: diesel engine performance, emissions, and economic assessment.

Published in:

Acta Scientiarum: Technology, 2020, v. 42, p. 1, doi. 10.4025/actascitechnol.v42i1.43882

By:

Seye, Omar;
Rodrigues Souza, Rubem Cesar;
Pereira Silva, Ramon Eduardo;
da Silva, Robson Leal

Publication type:

Article

Crude palm oil as a complementary fuel for power generation in Amazonia: diesel engine performance, emissions, and economic assessment.

Published in:

Acta Scientiarum: Technology, 2019, v. 42, p. 1, doi. 10.4025/actascitechnol.v42i1.43882

By:

Seye, Omar;
Rodrigues Souza, Rubem Cesar;
Pereira Silva, Ramon Eduardo;
da Silva, Robson Leal

Publication type:

Article

Test study and molecular dynamics simulation of Fe3+ modified TiO2 absorbing automobile exhaust.

Published in:

PLoS ONE, 2022, v. 17, n. 1, p. 1, doi. 10.1371/journal.pone.0263040

By:

Lai, Feng;
Zhang, Hongliang;
Zhu, Kongfa;
Huang, Man

Publication type:

Article

Icy affairs: Understanding recent advancements in the freezing and frozen storage of fish.

Published in:

Comprehensive Reviews in Food Science & Food Safety, 2022, v. 21, n. 2, p. 1383, doi. 10.1111/1541-4337.12883

By:

Jia, Hui;
Roy, Koushik;
Pan, Jinfeng;
Mraz, Jan

Publication type:

Article

Container Materials for Molten Salt Nuclear Reactors: Problems and Research.

Published in:

Physics of Atomic Nuclei, 2024, v. 87, n. 8, p. 1166, doi. 10.1134/S1063778824080167

By:

Abalin, A. S.;
Abalin, S. S.;
Ivliev, P. N.;
Ignatyev, V. V.;
Klimov, K. S.;
Subbotin, A. S.;
Surenkov, A. I.;
Trunkin, I. N.;
Uglov, V. S.

Publication type:

Article

High‐performance thin‐layer chromatography with atmospheric solids analysis probe mass spectrometry for analysis of gasoline polymeric additives.

Published in:

Rapid Communications in Mass Spectrometry: RCM, 2020, v. 34, p. 1, doi. 10.1002/rcm.8755

By:

Beaumesnil, Mathieu;
Mendes Siqueira, Anna Luiza;
Hubert‐Roux, Marie;
Loutelier‐Bourhis, Corinne;
Afonso, Carlos;
Racaud, Amandine;
Bai, Yang

Publication type:

Article

A Comperative Study on the Influence of Mineral Additives to the Physicomechanical Properties of NHL Mortars Cured in Water.

Published in:

Gazi University Journal of Science, 2021, v. 34, n. 3, p. 611, doi. 10.35378/gujs.746983

By:

GUR, Dilara;
ACUN OZGUNLER, Seden

Publication type:

Article

Atmospheric fate of a series of saturated alcohols: kinetic and mechanistic study.

Published in:

Atmospheric Chemistry & Physics, 2020, v. 20, n. 2, p. 699, doi. 10.5194/acp-20-699-2020

By:

Colmenar, Inmaculada;
Martin, Pilar;
Cabañas, Beatriz;
Salgado, Sagrario;
Tapia, Araceli;
Aranda, Inmaculada

Publication type:

Article

Characteristics of the main primary source profiles of particulate matter across China from 1987 to 2017.

Published in:

Atmospheric Chemistry & Physics, 2019, v. 19, n. 5, p. 3223, doi. 10.5194/acp-19-3223-2019

By:

Bi, Xiaohui;
Dai, Qili;
Wu, Jianhui;
Zhang, Qing;
Zhang, Wenhui;
Luo, Ruixue;
Cheng, Yuan;
Zhang, Jiaying;
Wang, Lu;
Yu, Zhuojun;
Zhang, Yufen;
Tian, Yingze;
Feng, Yinchang

Publication type:

Article

Development of Green Energetic Oxidizers for Solid Propellant Applications: Present Status.

Published in:

Propellants, Explosives, Pyrotechnics, 2024, v. 49, n. 12, p. 1, doi. 10.1002/prep.202400076

By:

Arun Kumar, Macharla;
Purayil Dhanya, Bhandara;
Venugopal, Sarika;
Vargeese, Anuj A;
Krishnamurthy, V. N.

Publication type:

Article

Experimental Observation and Characterization of B−HTPB‐based Solid Fuel with Addition of Iron Particles for Hybrid Gas Generator in Ducted Rocket Applications.

Published in:

Propellants, Explosives, Pyrotechnics, 2019, v. 44, n. 7, p. 896, doi. 10.1002/prep.201900009

By:

Hashim, Syed Alay;
Ojha, Pawan Kumar;
Karmakar, Srinibas;
Roy, Arnab;
Chaira, Debasis

Publication type:

Article

Paired Electrosynthesis of Formaldehyde Derivatives from CO2 Reduction and Methanol Oxidation.

Published in:

Angewandte Chemie, 2024, v. 136, n. 2, p. 1, doi. 10.1002/ange.202316020

By:

Bin Yeo, Jia;
Ho Jang, Jun;
In Jo, Young;
Woo Koo, Jeong;
Tae Nam, Ki

Publication type:

Article

Increase in the rate of fuel combustion on addition of nanosized carbon particles.

Published in:

Journal of Engineering Physics & Thermophysics, 2012, v. 85, n. 4, p. 867, doi. 10.1007/s10891-012-0725-7

By:

Shushkov, S.;
Genarova, T.;
Leshchevich, V.;
Penyazkov, O.;
Gusakova, S.;
Egorov, A.;
Govorov, M.;
Prismotrov, Yu.

Publication type:

Article

Розрахункова методика визначення ефективних комбінацій окисників для інтенсифікації вигоряння вуглецю паливної добавки при виробництві будівельної кераміки.

Published in:

Issues of Chemistry & Chemical Technology / Voprosy Khimii & Khimicheskoi Tekhnologii, 2022, v. 7, n. 2, p. 47, doi. 10.32434/0321-4095-2022-141-2-47-55

By:

Лігезін, С. Л.;
Щукіна, Л. П.;
Пітак, Я. М.

Publication type:

Article

Current Advances in Microbial Production of Acetoin and 2,3-Butanediol by Bacillus spp.

Published in:

Fermentation (Basel), 2021, v. 7, n. 4, p. 1, doi. 10.3390/fermentation7040307

By:

Petrov, Kaloyan;
Petrova, Penka

Publication type:

Article

Recovering Apple Agro-Industrial Waste for Bioethanol and Vinasse Joint Production: Screening the Potential of Chile.

Published in:

Fermentation (Basel), 2021, v. 7, n. 4, p. 1, doi. 10.3390/fermentation7040203

By:

Hernández, Diógenes;
Rebolledo-Leiva, Ricardo;
Fernández-Puratich, Harald;
Quinteros-Lama, Héctor;
Cataldo, Fernando;
Muñoz, Edmundo;
Tenreiro, Claudio

Publication type:

Article

Étude de la production de bioéthanol biocarburant à partir de sous-produits agricoles: Effet de l'aération.

Published in:

Algerian Journal of Environmental Science & Technology, 2019, v. 5, n. 3, p. 1087

By:

Mansouri, A.;
Rihani, R.;
Bentahar, F.

Publication type:

Article

Effect of eco-friendly nano additive with green fuel on performance and emissions of a compression ignition engine.

Published in:

Cogent Engineering, 2023, v. 10, n. 2, p. 1, doi. 10.1080/23311916.2023.2272351

By:

Mohan, Sooraj;
Barboza, Augustine B.V.;
Dinesha, P.

Publication type:

Article

Combined influence of fuel injection strategy and nanoparticle additives on the performance and emission characteristics of a biodiesel fueled engine.

Published in:

Cogent Engineering, 2021, v. 8, n. 1, p. 1, doi. 10.1080/23311916.2021.1939515

By:

Kumar, Shiva;
Dinesha, Pijakala

Publication type:

Article

The gasoline fuel quality impact on fuel consumption, air-fuel ratio (AFR), lambda (λ) and exhaust emissions of gasoline-fueled vehicles.

Published in:

Cogent Engineering, 2019, v. 6, n. 1, p. 1, doi. 10.1080/23311916.2019.1616866

By:

Flamarz Al-Arkawazi, Shamil Ahmed;
Cameselle, Claudio

Publication type:

Article

Rheological evaluation of bitumen modified using antistripping additives synthesised from waste polyethylene terephthalate (PET).

Published in:

International Journal of Pavement Engineering, 2020, v. 21, n. 9, p. 1083, doi. 10.1080/10298436.2018.1519192

By:

Padhan, Rabindra Kumar;
Mohanta, Chandrasekhar;
Sreeram, Anand;
Gupta, Anurag

Publication type:

Article

Advanced Materials for Emission Reduction: Role of Nanoparticles and Metal-Coated Catalytic Converters in Biodiesel Combustion.

Published in:

Russian Journal of General Chemistry, 2025, v. 95, n. 3, p. 773, doi. 10.1134/S1070363224613450

By:

Murugesan, E.;
Dhairiyasamy, R.;
Varshney, D.;
Singh, S.

Publication type:

Article