Works about FLEXURAL strength

Results: 5000

国产 T800/ 聚芳醚酮热塑性复合材料在湿热环境中的老化行为.

Published in:

Journal of Aeronautical Materials, 2025, v. 45, n. 3, p. 52, doi. 10.11868/j.issn.1005-5053.2025.000066

By:

杨宏茹;
王成博;
刘刚;
张代军;
陈春海;
姚佳楠

Publication type:

Article

基于自动铺放技术的聚芳醚酮复合材料后处理工艺优化.

Published in:

Journal of Aeronautical Materials, 2025, v. 45, n. 3, p. 32, doi. 10.11868/j.issn.1005-5053.2025.000076

By:

王成博;
张代军;
关博文;
辛志博;
刘刚;
李军;
陈祥宝

Publication type:

Article

Reinforced Concrete with Graphene Oxide: Techno-Economic Feasibility for Reduced Cement Usage and CO2 Emissions.

Published in:

International Journal of Concrete Structures & Materials, 2025, v. 19, n. 1, p. 1, doi. 10.1186/s40069-025-00793-1

By:

Domínguez-Santos, D.;
Muñoz, P.;
Morales-Ferreiro, J. O.;
Acuña, C.;
Diaz-Droguett, D. E.;
Villaro, Elvira

Publication type:

Article

熔盐造孔法制备六铝酸钙多孔材料.

Published in:

Refractories / Naihuo Cailiao, 2021, v. 55, n. 5, p. 448, doi. 10.3969/j.issn.1001-1935.2021.05.016

By:

康国卫;
刘苗伟;
杨亚峰;
刘新红;
贾全利

Publication type:

Article

SiC含量对选区激光熔化制备SiC-Al复合材料结构与性能的影响.

Published in:

Refractories / Naihuo Cailiao, 2021, v. 55, n. 5, p. 423, doi. 10.3969/j.issn.1001-1935.2021.05.011

By:

解厚波;
张家莲;
苑高千;
张竞哲;
李可琢;
李发亮;
张海军

Publication type:

Article

Benchmarking Values of Modulus of Rupture for Shells Used in Different Investment Casting Segments.

Published in:

Journal of Advanced Manufacturing Systems, 2025, v. 24, n. 3, p. 559, doi. 10.1142/S0219686725500258

By:

Maheta, Nikunj;
Pandya, Sanket;
Edacherian, Abhilash;
Sata, Amit

Publication type:

Article

Comparative Evaluation of Flexural Strength of Heat-Polymerized Polymethyl Methacrylate Denture Base Material Reinforced with Silanized Aluminium Oxide Nanoparticles and Silanized Tetragonal Zirconium Oxide Nanoparticles – An In Vitro Study.

Published in:

Journal of the International Clinical Dental Research Organization, 2025, v. 17, n. 1, p. 101, doi. 10.4103/jicdro.jicdro_74_24

By:

Sahai, Richa;
Jalan, Sumeet

Publication type:

Article

A novel correlation study using pearson and spearman algorithms for mineral component-driven strength analysis of geopolymer.

Published in:

Pamukkale University Journal of Engineering Sciences, 2025, v. 31, n. 3, p. 409, doi. 10.5505/pajes.2024.48682

By:

Yılmaz, Yıldıran;
Çakmak, Talip;
Kurt, Zafer;
Ustabaş, İlker

Publication type:

Article

IN VITRO STUDY OF POLYMETHYL METHACRYLATE COMBINED WITH SEED OIL OF NIGELLA SATIVA L. AS AN ANTIMICROBIAL BIO-BASED POLYMER FOR DENTAL APPLICATIONS.

Published in:

Journal of Microbiology, Biotechnology & Food Sciences, 2025, v. 14, n. 6, p. 1, doi. 10.55251/jmbfs.12362

By:

El Sadda, Rana R.;
Abobakr, Rahma A. M.;
Abdallah, Reham M.;
Moawed, Elhossein A.;
El-Zahed, Mohamed M.

Publication type:

Article

Development of Fly Ash-GGBS based Self Compacting Geo-Polymer Concrete with and without Steel Fibres.

Published in:

Computational Engineering & Physical Modeling, 2021, p. 1, doi. 10.22115/CEPM.2021.276291.1163

By:

Kumar, B. Narendra;
Kumar, G. Vinod;
Rajesh, V.

Publication type:

Article

Enhancement of flexural strength of cement paste by in-situ polymerization of polyacrylamide.

Published in:

Journal of Sustainable Cement-Based Materials, 2025, v. 14, n. 7, p. 1269, doi. 10.1080/21650373.2025.2490611

By:

Wang, Fengjuan;
Liu, Haotian;
Wang, Xiaozhu;
Shi, Jinyan;
Xu, Yang;
Jiang, Jinyang

Publication type:

Article

Fabrication and property characterization of biocomposite based on polyamide 11 and AP1 green ramie fiber modified with epoxy.

Published in:

Vietnam Journal of Chemistry, 2024, v. 62, n. 5, p. 647, doi. 10.1002/vjch.202300367

By:

Thang, Dam Xuan;
Huynh, Mai Duc;
Trung, Tran Huu;
Trang, Nguyen Thi Thu;
Mai, Tran Thi;
Dat, Nguyen Huu;
Cong, Do Van;
Hai, Luong Nhu;
Hoang, Thai;
Giang, Nguyen Vu

Publication type:

Article

Influence of build angle, printing layer thickness and aging on the flexural strength, precision, roughness and porosity analysis of a printed resin for provisional restorations.

Published in:

Odontology, 2025, v. 113, n. 3, p. 1165, doi. 10.1007/s10266-025-01060-1

By:

de Gois Moreira, Fernanda Gurgel;
Bezerra, Marcella Guedes Pereira Gouvêa;
de Miranda, Larissa Mendonça;
da Silva, Sarah Emille Gomes;
de Andrade Dantas, Eugênia Livia;
de Sousa, Frederico Barbosa;
Özcan, Mutlu;
e Souza, Rodrigo Othávio de Assunção

Publication type:

Article

Physikalische und biologische Eigenschaften unterschiedlicher Schienenmaterialien in der Kieferorthopädie: Ein narrativer Review.

Published in:

Kieferorthopädie: die Zeitschrift für die Praxis, 2025, v. 39, n. 2, p. 121

By:

Berger, Lilian;
Stawarczyk, Bogna;
Keller, Alexander;
Wichelhaus, Andrea;
Hoffmann, Lea

Publication type:

Article

Influence of scanning methods on the forming accuracy and flexural strength of Al2O3 ceramic prepared by laser scanning stereolithography.

Published in:

Advances in Applied Ceramics: Structural, Functional & Bioceramics, 2025, v. 124, n. 1/2, p. 42, doi. 10.1177/17436753251342320

By:

Yan, Zhang;
Zhang, Zhao;
Cui, Maomao;
Wang, Xiao;
Liu, Huixia

Publication type:

Article

Flexural behavior and design of high-strength I-shaped steel-UHPC composite beams.

Published in:

Advances in Structural Engineering, 2025, v. 28, n. 10, p. 1877, doi. 10.1177/13694332251319094

By:

Lai, Zhichao;
Yao, Pengyu;
Yang, Xiaoqiang;
Li, Shihui;
Zhao, Qiu

Publication type:

Article

Investigation of in-situ synthesis of alumina reinforcement and comparative flexural behavior with respect to ex-situ Al2O3 reinforced copper composite.

Published in:

Journal of Ultrafine Grained & Nanostructured Materials, 2021, v. 54, n. 1, p. 101, doi. 10.22059/jufgnsm.2021.01.11

By:

Fallah, Masoud Khodabakhshzade;
Tabrizi, Saeid Ghesmati;
Seyedi, Sheida

Publication type:

Article

Lignitpernye-alapú geopolimer habok mechanikai tulajdonságainak szabályozása az alapanyag ôrlésével.

Published in:

Építőanyag: Journal of Silicate Based & Composite Materials, 2024, v. 76, n. 3, p. 108, doi. 10.14382/epitoanyag-jsbcm.2024.12

By:

NOÉMI, NÉMETH;
ROLAND, SZABÓ;
ÁKOS, DEBRECZENI;
GÁBOR, MUCSI

Publication type:

Article

Enhancing fire resistance of concrete through metakaolin substitution: A comprehensive experimental study.

Published in:

Építőanyag: Journal of Silicate Based & Composite Materials, 2024, v. 76, n. 3, p. 101, doi. 10.14382/epitoanyag-jsbcm.2024.11

By:

YOUSUF, ZUBAIR;
HLAVIČKA, VIKTOR

Publication type:

Article

Nopal extract and aloe vera to improve structural concrete exposed to saline environments.

Published in:

Revista Facultad de Ingeniería Universidad de Antioquia, 2025, n. 115, p. 62, doi. 10.17533/udea.redin.20240514

By:

Katherine Barco-Tocto, Evelyn;
Sergio Agüero-Hualcas, Darwin;
Farfán-Córdova, Marlon

Publication type:

Article

Effects of the incorporation of steel fibers with plasticizer additive in concrete.

Published in:

Revista Facultad de Ingeniería Universidad de Antioquia, 2025, n. 115, p. 84, doi. 10.17533/udea.redin.20240515

By:

Edilberto Sandoval-Siesquen, Fernando;
Pedro Muñoz-Pérez, Sócrates

Publication type:

Article

Mechanical properties of nano-SiO2 modified ultra-high-performance concrete.

Published in:

Vibroengineering Procedia, 2025, v. 58, p. 229, doi. 10.21595/vp.2025.24781

By:

Xiaoqiang Jiang;
Guoxue Zhu;
Jun Ai;
Bolun Zhang;
Yaling Yan

Publication type:

Article

In vitro Study on the Flexural Strength of Different Polymethyl Methacrylate Denture Resins.

Published in:

Journal of Pharmacy & Bioallied Sciences, 2025, v. 17, p. S1695, doi. 10.4103/jpbs.jpbs_265_25

By:

Vivek, Rajul;
Ranjan, Alok;
Gajdhar, Shaiq;
Salunkhe, Vaibhavi Parikshit;
Chaware, Smita;
Rao, Vinay

Publication type:

Article

Strength properties of concrete containing palm bunch ash–calcined anthill clay.

Published in:

International Review of Applied Sciences & Engineering, 2025, v. 16, n. 2, p. 265, doi. 10.1556/1848.2024.00905

By:

Eziefula, Uchechi G.;
Nwosu, Oluchi U.;
Udoha, Chioma L.;
Ibearugbulem, Owus M.;
Onyechere, Ignatius C.

Publication type:

Article

Internal Curing Utilising Recycled Concrete Aggregate: A Sustainable Approach for Improving High-Strength Concrete's Performance.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 11, p. 8061, doi. 10.1007/s13369-024-09187-z

By:

Whwah, Mortada Sabeh;
Mahmmod, Laith Mohammed Ridha;
Abdoulhaleem, Huda Hafedh;
Dulaimi, Anmar

Publication type:

Article

PENGARUH SIFAT MEKANIK KOMPOSIT SERAT SABUT KELAPA BERMATRIK POLYESTER TERHADAP PENGUJIAN TARIK.

Published in:

Jurnal Indonesia Sosial Teknologi, 2022, v. 3, n. 2, p. 219, doi. 10.36418/jist.v3i2.360

By:

Farrel, Delza Alvariza;
Yuliyanto;
Zulfitriyanto

Publication type:

Article

Effect of C Type Fly Ash as Supplementary Cementitious Material in RPC Containing Ferronickel Slag 4: Mechanical Properties, Microstructure, and Leaching Assessment.

Published in:

International Review of Civil Engineering, 2025, v. 16, n. 1, p. 45, doi. 10.15866/irece.v16i1.25789

By:

Suryaningrat Edwin, Romy;
Ngii, Edward;
Simatupang, Minson;
Mangidi, Uniadi;
Masud, Fitriah

Publication type:

Article

Process optimization of material extrusion additive manufacturing with ASA: robust design and predictive models for engineering response metrics.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 9, p. 4431, doi. 10.1007/s00170-025-15779-2

By:

Petousis, Markos;
Mountakis, Nikolaos;
Spyridaki, Maria;
Gkagkanatsiou, Katerina;
Valsamos, Ioannis;
Moutsopoulou, Amalia;
Stratakis, Emmanuel;
Vidakis, Nectarios

Publication type:

Article

A review of the mechanical property, durability, and modification of carbon‐ and glass‐fiber reinforced polyurethane composites.

Published in:

Polymer Composites, 2025, v. 46, n. 9, p. 7819, doi. 10.1002/pc.29514

By:

Han, Wei;
Zhou, Ping;
Xie, Siwei;
Li, Chenggao;
Xian, Guijun;
Dong, Shaoce

Publication type:

Article

Enhancing the flexural behavior of GFRP single‐lap co‐cure joints reinforced with multi‐reinforcements.

Published in:

Polymer Composites, 2025, v. 46, n. 9, p. 8458, doi. 10.1002/pc.29503

By:

Venugopal, Anandhan;
P, Edwin Sudhagar;
S, Senthamizh Selvan;
Murugan, Rajesh;
Suthanthiraveerappa, Vimalanand;
Hiremath, Vinayak S

Publication type:

Article

Secondary bonded and co‐bonded CFRP composite joints with innovative lamination technique: Flexural and failure analysis.

Published in:

Polymer Composites, 2025, v. 46, n. 9, p. 8383, doi. 10.1002/pc.29498

By:

Karthikeyan, N.;
Naveen, Jesuarockiam;
Rajesh, M.;
Reddy, D. Mallikarjuna

Publication type:

Article

Characterization of Potassium Titanate Whisker and UHMWPE‐reinforced Polyethersulfone/Short Carbon Fiber composites: Mechanical, thermal, and structural insights.

Published in:

Polymer Composites, 2025, v. 46, n. 9, p. 8290, doi. 10.1002/pc.29493

By:

Bettegowda, Harshavardhan;
Mahesh, Vishwas;
Mahesh, Vinyas;
Dixit, Arun C.

Publication type:

Article

Enhancing the performance of CFRP composite joints through a hybrid approach: Geometric modification (stepped adherends) and adhesive modification.

Published in:

Polymer Composites, 2025, v. 46, n. 9, p. 8113, doi. 10.1002/pc.29482

By:

Karthikeyan, N.;
Naveen, Jesuarockiam

Publication type:

Article

Surface treating and hybridizing short carbon fibers: toward reinforcement of cementitious composites.

Published in:

Structural Concrete, 2025, v. 26, n. 3, p. 2900, doi. 10.1002/suco.202400468

By:

Ghamarpoor, Reza;
Jamshidi, Masoud;
Zojaji, Koosha

Publication type:

Article

Mitigating autogenic shrinkage in high‐performance concrete using wollastonite: A structural enhancement approach.

Published in:

Structural Concrete, 2025, v. 26, n. 3, p. 2381, doi. 10.1002/suco.202400007

By:

Aziza, Kuldasheva;
Li, Beixing;
Huang, Bin;
Kholjigit, Kuldashev;
Yu, Yang

Publication type:

Article

Assessment of the fracture properties of mortars reinforced with synthetic fibers.

Published in:

Structural Concrete, 2025, v. 26, n. 3, p. 2487, doi. 10.1002/suco.202400005

By:

Ibrahim, Haruna;
Wardeh, George;
Fares, Hanaa;
Ghorbel, Elhem

Publication type:

Article

MECHANICAL, WEATHERING, THERMAL, AND FIRE PERFORMANCE OF TREE BARK REINFORCED WOOD PLASTIC COMPOSITES.

Published in:

Cellulose Chemistry & Technology, 2025, v. 59, n. 3/4, p. 365

By:

DURMAZ, SEFA;
AKSOY, EMRE;
KELES, OZLEM OZGENC;
ARAS, UGUR

Publication type:

Article

Recycled PET as Reinforcement in UPE Composites: Mechanical Integrity, Thermal Conductivity, and Acoustic Insulation Characteristics.

Published in:

Annales de Chimie Science des Matériaux, 2025, v. 49, n. 2, p. 177, doi. 10.18280/acsm.490208

By:

Hashim, Saad Mushtaq;
Bdaiwi, Waleed

Publication type:

Article

Modification Mechanism of Low-Dosage Vinyl Acetate-Ethylene on Ordinary Portland Cement–Sulfoaluminate Cement Binary Blended Rapid Repair Mortar.

Published in:

Polymers (20734360), 2025, v. 17, n. 11, p. 1501, doi. 10.3390/polym17111501

By:

Wang, Hecong;
Zhu, Yuxue;
Li, Ting;
Li, Xiaoning;
Peng, Shuai;
Guo, Jinzhu;
Pei, Xuqiang;
Zhong, Congchun;
Yang, Yihang;
Ma, Qiang;
Zhang, Zhonglun;
Wu, Minghui;
Zhang, Qunchao;
Shi, De'an;
Song, Zuobao

Publication type:

Article

Effect the Sintering Temperature on the Microstructure and Flexural Strength of ZrO 2 Ceramics Produced by NanoParticle Jetting.

Published in:

Materials (1996-1944), 2025, v. 18, n. 11, p. 2605, doi. 10.3390/ma18112605

By:

Huang, Youji;
Li, Xiaorong;
Chen, Hongyu;
Ren, Kun;
Guo, Huijun;
Qi, Huan

Publication type:

Article

Long-Term Behavior and Microstructure of High-Performance Concrete with Coal Slag.

Published in:

Materials (1996-1944), 2025, v. 18, n. 11, p. 2585, doi. 10.3390/ma18112585

By:

Smarzewski, Piotr

Publication type:

Article

Optimization of the Mechanical and Structural Performance of Bamboo by Microwave–Compression as a Function of Moisture Content.

Published in:

Materials (1996-1944), 2025, v. 18, n. 11, p. 2551, doi. 10.3390/ma18112551

By:

Wang, Huixiang;
Liu, Rong;
An, Rui;
Liu, Xinyu;
Zhao, Shiyu;
Zhu, Zhaolong

Publication type:

Article

Carbonized Hemp Fiber for Use in Composites.

Published in:

Materials (1996-1944), 2025, v. 18, n. 11, p. 2509, doi. 10.3390/ma18112509

By:

Yusuf, Sodiq B.;
Maughan, Michael R.;
McDonald, Armando G.

Publication type:

Article

Effect of Waterglass on the Hydration Process of Slag-Fly Ash-Based Geopolymer.

Published in:

Materials (1996-1944), 2025, v. 18, n. 11, p. 2450, doi. 10.3390/ma18112450

By:

Hai, Ran;
Guan, Qingpu;
Zhang, Xiaorong;
Yang, Fei;
Cui, Li;
Liu, Junxia

Publication type:

Article

Use of Magnetite Derived from Acid Mine Drainage in the Stabilization of Foam for Foamed Mortar.

Published in:

Sustainability (2071-1050), 2025, v. 17, n. 11, p. 4986, doi. 10.3390/su17114986

By:

Lermen, Richard Thomas;
Pfluck, Matheus Alexandre;
Pilotto, Thaís Letícia;
Fernandes, Elen Cristina Faustino Boff;
Neckel, Alcindo;
Silva, Rodrigo de Almeida;
Ramos, Claudete Gindri

Publication type:

Article

The Impact of Zirconium Oxide Nanoparticles on the Mechanical and Physical Properties of Glass Ionomer Dental Materials.

Published in:

International Journal of Molecular Sciences, 2025, v. 26, n. 11, p. 5382, doi. 10.3390/ijms26115382

By:

Amin, Faiza;
Moin, Syed Faraz;
Kumar, Naresh;
Asghar, Muhammad Asif;
Mahmood, Syed Junaid;
Palma, Paulo J.

Publication type:

Article

A Comprehensive Study of the Effect of Lubricant in the Sizing Agent on the Properties of a Basalt Fiber and Epoxy Resin Composite Material.

Published in:

Nanomaterials (2079-4991), 2025, v. 15, n. 11, p. 838, doi. 10.3390/nano15110838

By:

He, Jiajun;
Lai, Chuan;
Li, Junlan;
Yang, Ning;
Xie, Bin;
Li, Xiaolong;
Deng, Yuanfang;
Zou, Like

Publication type:

Article

Preparation of High-Purity Silicon Carbide Ceramics by Hot Pressing Sintering.

Published in:

Nanomaterials (2079-4991), 2025, v. 15, n. 11, p. 825, doi. 10.3390/nano15110825

By:

Zou, Chang;
Xiao, Yifan;
Li, Lixia;
Chen, Jiagang;
Sun, Wei;
Guo, Xingzhong

Publication type:

Article

Effects of Nano-SiO 2 and Nano-CaCO 3 on Mechanical Properties and Microstructure of Cement-Based Soil Stabilizer.

Published in:

Nanomaterials (2079-4991), 2025, v. 15, n. 11, p. 785, doi. 10.3390/nano15110785

By:

Lei, Baofeng;
Zhang, Xingchen;
Fan, Henghui;
Gao, Jianen;
Du, Yichun;
Ji, Yafei;
Gao, Zhe

Publication type:

Article

The Mechanical Properties and Durability of the PE-BFRP Hybrid-Fiber-Engineered Cementitious Composite (ECC).

Published in:

Buildings (2075-5309), 2025, v. 15, n. 11, p. 1860, doi. 10.3390/buildings15111860

By:

Xu, Shasha;
Li, Wei;
Wang, Xuezhen;
Zhang, Hongze;
Liu, Ju;
Jiang, Hui;
Wang, Xuebin;
Ma, Hongke;
Shi, Jun;
Yu, Zhenyun;
Dai, Kuangyu

Publication type:

Article