Works about COMPRESSIVE strength

Results: 5000

Testing and prediction of mechanical characteristics of sensitive marine clays stabilized by deep mixing method.

Published in:

Marine Georesources & Geotechnology, 2025, v. 43, n. 7, p. 1182, doi. 10.1080/1064119X.2024.2392276

By:

An, Yang;
Zhang, Gen

Publication type:

Article

Development of Flame Retardant Composite Based on Glucose-Citric Acid-Based Resin Reinforced by Walnut Shell Powder.

Published in:

Journal of Renewable Materials, 2025, v. 13, n. 6, p. 1229, doi. 10.32604/jrm.2025.02024-0073

By:

Wang, Zhenzhou;
Luo, Rui;
Yang, Wenqing;
Lee, Seng Hua;
Lum, Wei Chen;
Liu, Longjiang;
Zhou, Xiaojian;
Zhang, Jun

Publication type:

Article

Structural Recoverability of White Breads Based on the "Cohesiveness" Value From Texture Profile Analysis and the "Compression Force Value" From the American Association of Cereal Chemists (74–09).

Published in:

Journal of Texture Studies, 2025, v. 56, n. 3, p. 1, doi. 10.1111/jtxs.70028

By:

Sato, Yukinori

Publication type:

Article

THE IMPROVEMENT OF THE DURABILITY AND FROST RESISTANCE OF TRADITIONAL AND HISTORICAL LIME MORTARS BY MEANS OF SURFACE IMPREGNATION WITH LIQUID POTASSIUM SILICATE AND SILICIC ACID ESTER.

Published in:

International Journal of Conservation Science, 2025, v. 16, n. 2, p. 517, doi. 10.36868/IJCS.2025.si.11

By:

LOGOŃ, Dominik;
KRUKOWIECKA-BRZĘCZEK, Anna

Publication type:

Article

A novel correlation study using pearson and spearman algorithms for mineral component-driven strength analysis of geopolymer.

Published in:

Pamukkale University Journal of Engineering Sciences, 2025, v. 31, n. 3, p. 409, doi. 10.5505/pajes.2024.48682

By:

Yılmaz, Yıldıran;
Çakmak, Talip;
Kurt, Zafer;
Ustabaş, İlker

Publication type:

Article

Sol-Jel yöntemiyle alümina seramik üretiminde magnezya, zirkonya katkılarının ve proses parametrelerinin deney tasarım yöntemiyle incelenmesi.

Published in:

Pamukkale University Journal of Engineering Sciences, 2025, v. 31, n. 3, p. 491, doi. 10.5505/pajes.2024.17981

By:

Yalamaç, Emre;
Adıgüzel, Hüseyin;
Murat, Memnune;
Vural, Dila;
Çelik, Ali Cihan

Publication type:

Article

A Machine Learning based uncertainty quantification for compressive strength of high-performance concrete.

Published in:

Frontiers of Structural & Civil Engineering, 2025, v. 19, n. 5, p. 824, doi. 10.1007/s11709-025-1181-8

By:

Vu-Bac, Nam;
Le-Anh, Tuan;
Rabczuk, Timon

Publication type:

Article

A 3D‐Printable Acrylate‐Grafted Polycarbosilane Synthesized via Dehydrogenation Coupling Reaction.

Published in:

Journal of Applied Polymer Science, 2025, v. 142, n. 22, p. 1, doi. 10.1002/app.56964

By:

Jing, Chufan;
Pan, Zhenxue;
Gou, Xinyue;
Xia, Lin;
Li, Yongming;
Xu, Caihong

Publication type:

Article

Optical-acoustic responses in uniaxial compression failure progress of fibre-reinforced cemented bodies.

Published in:

Nondestructive Testing & Evaluation, 2025, v. 40, n. 7, p. 2913, doi. 10.1080/10589759.2024.2389937

By:

Zhao, Kang;
Yang, Jian;
Huang, Qizheng;
Yan, Yajing;
Chen, Jiale;
Nie, Qiang

Publication type:

Article

Performance evaluation of concrete comprising sugarcane bagasse ash and recycled polyethylene terephthalate.

Published in:

Australian Journal of Structural Engineering, 2025, v. 26, n. 3, p. 251, doi. 10.1080/13287982.2024.2387998

By:

Daniel, Chukwuemeka;
Onchiri, Richard Ocharo;
Omondi, Benard Otieno

Publication type:

Article

Utilization of Iron Filings as Partial Replacements for Sand in Self-Compacting Concrete.

Published in:

Tanzania Journal of Science, 2021, v. 47, n. 2, p. 906, doi. 10.4314/tjs.v47i3.3

By:

Olawale, Simon O.;
Kareem, Mutiu A.;
Muritala, Habeeb T.;
Adebanjo, Abiola U.;
Alabi, Olusegun O.;
Olawuyi, Oluwole A.;
Fadipe, Olusola O.

Publication type:

Article

Experimental Study of Concrete Using Raw Rice Husk as Partial Replacement of Cement with Natural Fiber (Jute Fiber) as Reinforcing Material.

Published in:

Computational Engineering & Physical Modeling, 2021, p. 29, doi. 10.22115/CEPM.2021.280252.1166

By:

Gupta, S. D.;
Islam, T.;
Sohag, Md. A. Islam;
Salakin, S.;
Hossain, I.

Publication type:

Article

Low-clay soil as fine aggregate in 3D printed concrete: insights into fresh and hardened properties.

Published in:

Journal of Sustainable Cement-Based Materials, 2025, v. 14, n. 7, p. 1387, doi. 10.1080/21650373.2025.2505750

By:

Kumar, Sandeep;
Kumar, Abhishek;
Pundir, Aakanksha;
Dwivedi, Ashutosh;
Soda, Prabhath Ranjan Kumar;
C M, Sahana;
Gupta, Souradeep;
Dixit, Anjaneya

Publication type:

Article

Effect of C–S–H seeds on the hydration of cemented paste backfill containing cement clinker, slag, and iron tailings.

Published in:

Journal of Sustainable Cement-Based Materials, 2025, v. 14, n. 7, p. 1343, doi. 10.1080/21650373.2025.2501671

By:

Fan, Jianguo;
Liu, Peng;
Li, Xiuhao;
Wang, Zhiguo;
Shao, Changzhi;
Liu, Yankai;
Chen, Mengjun;
Liu, Rentai;
Zhang, Qingsong

Publication type:

Article

Effect of hydrates of ITZ on chloride-attack resistance in alkali-activated slag mortar.

Published in:

Journal of Sustainable Cement-Based Materials, 2025, v. 14, n. 7, p. 1281, doi. 10.1080/21650373.2025.2494061

By:

Han, Tae Hoon;
Jun, Yubin;
Kim, Jae Hong

Publication type:

Article

Physical, mechanical and microstructural properties of alkaline and acid-activated mixtures of calcined laterite-volcanic ash based inorganic polymers: Effects of reciprocal substitution.

Published in:

Advances in Applied Ceramics: Structural, Functional & Bioceramics, 2025, v. 124, n. 1/2, p. 23, doi. 10.1177/17436753251333504

By:

Ndisho, Solomon T;
Taybe, Ngaba;
Baenla, Jean;
Douwe, Philippe;
Elimbi, Antoine

Publication type:

Article

Nopal extract and aloe vera to improve structural concrete exposed to saline environments.

Published in:

Revista Facultad de Ingeniería Universidad de Antioquia, 2025, n. 115, p. 62, doi. 10.17533/udea.redin.20240514

By:

Katherine Barco-Tocto, Evelyn;
Sergio Agüero-Hualcas, Darwin;
Farfán-Córdova, Marlon

Publication type:

Article

Development of resource-saving composition of sand-clay mixtures for steel castings with improved physical and chemical characteristics.

Published in:

Vibroengineering Procedia, 2025, v. 58, p. 277, doi. 10.21595/vp.2025.24959

By:

Toirov, Otabek;
Tursunov, Nodirjon;
Kuchkorov, Lochinbek

Publication type:

Article

Mechanical properties of nano-SiO<sub>2</sub> modified ultra-high-performance concrete.

Published in:

Vibroengineering Procedia, 2025, v. 58, p. 229, doi. 10.21595/vp.2025.24781

By:

Xiaoqiang Jiang;
Guoxue Zhu;
Jun Ai;
Bolun Zhang;
Yaling Yan

Publication type:

Article

南海气井环空带压诊断与封堵体系性能评价.

Published in:

Chemical Engineering of Oil & Gas / Shi You Yu Tian Ran Qi Hua Gong, 2025, v. 54, n. 3, p. 102, doi. 10.3969/j.issn.1007-3426.2025.03.014

By:

廖云虎;
李力;
郑华安;
贾辉;
王闯;
朱彤宇;
郑玉飞

Publication type:

Article

An Experimental Investigation of CFRP Strengthening Efficiency on the Retrofitted Damaged Geopolymer Concrete Beams.

Published in:

Gazi University Journal of Science, 2025, v. 38, n. 2, p. 630, doi. 10.35378/gujs.1582884

By:

ARSLAN, Guray;
OZTURK, Mehdi;
SENGUN, Kadir

Publication type:

Article

A SIMPLIFIED APPROACH FOR THE MIX DESIGN OF INTERNALLY CURED SELFCOMPACTING CONCRETE WITH FLY ASH.

Published in:

Romanian Journal of Materials / Revista Romana de Materiale, 2024, v. 54, n. 3, p. 240

By:

SHANMUGAPRIYA, J.;
KUMAR, P. KRISHNA;
GEETHA, S.;
SIVARAMAKRISHNAN, S.;
SELVAKUMAR, M.;
KANDASAMY, A.

Publication type:

Article

Investigation of the Physicochemical Properties of Metakaolin‐Based Geopolymer Filled with Extraction Sludge‐Based Wastes.

Published in:

Macromolecular Symposia, 2025, v. 414, n. 3, p. 1, doi. 10.1002/masy.70025

By:

Viola, Veronica;
D'Angelo, Antonio

Publication type:

Article

Sustainable Utilization of Industrial Waste in Metakaolin‐Based Geopolymer Systems.

Published in:

Macromolecular Symposia, 2025, v. 414, n. 3, p. 1, doi. 10.1002/masy.70020

By:

Viola, Veronica

Publication type:

Article

Evaluation of Novel Calcium Silicate-Based Sealers Reinforced with Bioactive Glass.

Published in:

Journal of Pharmacy & Bioallied Sciences, 2025, v. 17, p. S1535, doi. 10.4103/jpbs.jpbs_101_25

By:

Batra, Divya;
Dahiya, Surya;
Kar, Sunil;
Arora, Ambuj;
Arya, Ashtha;
Imran, Ataul H.

Publication type:

Article

Relationship between petrography and geomechanical properties of the sandstone: A case study from Wadi Halfa, North Sudan.

Published in:

International Review of Applied Sciences & Engineering, 2025, v. 16, n. 2, p. 193, doi. 10.1556/1848.2024.00883

By:

Daoud, Abazar M. A.;
Abdelkader, Mohamed M.;
Sediek, Kadry N.;
Elsharief, Ahmed M.;
Rashed, Mohamed A.;
Elamein, Abdelaziz M.;
Abdalrahiem, Khaled O.;
Rózsa, Péter

Publication type:

Article

ANN modelling approach for predicting SCC properties - Research considering Algerian experience. Part II. Effects of aggregates types and contents.

Published in:

Journal of Building Materials & Structures, 2021, v. 8, n. 1, p. 63, doi. 10.34118/jbms.v8i1.778

By:

M., Sahraoui;
T., Bouziani

Publication type:

Article

Study of the mechanical behavior of dune sand treated by hydraulic binders: application in the road geotechnical field.

Published in:

Journal of Building Materials & Structures, 2021, v. 8, n. 1, p. 32, doi. 10.34118/jbms.v8i1.1005

By:

A., Smaida;
S., Haddadi;
A., Nechnech

Publication type:

Article

Microstructure and Room Temperature Compression Properties of TiAl Matrix Composites Reinforced by Ti‐6Al‐4V Particles.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 12, p. 1, doi. 10.1002/adem.202403014

By:

Shen, Yuxin;
Duan, Zhenxin;
Chen, Hao;
Liu, Liping;
Song, Xiaolei;
Han, Ying;
Chen, Hua;
Zou, Haohao;
Ran, Xu;
Shao, Huiliang

Publication type:

Article

水泥改性昔格达膨胀黏土岩试验研究.

Published in:

Geotechnical Engineering Technique / Yantu Gongcheng Jishu, 2025, v. 39, n. 3, p. 446, doi. 10.20265/j.cnki.issn.1007-2993.2024-0106

By:

杨小奇;
徐佩依;
杨颋;
王昌明

Publication type:

Article

Harnessing Machine Learning for Superior Prediction of Uniaxial Compressive Strength in Reinforced Soilcrete.

Published in:

Computers, Materials & Continua, 2025, v. 84, n. 1, p. 281, doi. 10.32604/cmc.2025.065748

By:

Al-Shamasneh, Ala'a R.;
Karim, Faten Khalid;
Mahmoodzadeh, Arsalan

Publication type:

Article

Compressive damage in super‐thick cross‐ply composites.

Published in:

Polymer Composites, 2025, v. 46, n. 9, p. 8249, doi. 10.1002/pc.29490

By:

Chen, Cheng‐Yu;
Lin, Yung‐Kun;
Kuo, Wen‐Shyong

Publication type:

Article

Evaluating the effectiveness of fusion bond repairs on impact damaged thermoplastic composites.

Published in:

Polymer Composites, 2025, v. 46, n. 9, p. 8235, doi. 10.1002/pc.29489

By:

Donough, Matthew J.;
Shafaq, Shafaq;
Sommacal, Silvano;
Chirima, Gleny;
Ibrahim, Matthew;
St. John, Nigel A.;
Prusty, B. Gangadhara

Publication type:

Article

Characteristics analysis of failure envelope for fiber‐reinforced plastic and its dependence on the ratio of uniaxial strength.

Published in:

Polymer Composites, 2025, v. 46, n. 9, p. 8199, doi. 10.1002/pc.29487

By:

Zhang, Shufeng;
Pang, Xiaofei;
Song, Guofeng;
He, Yonglyu;
Huang, Liwen;
Chen, Xun

Publication type:

Article

Tribological behavior and compressive creep of PTFE/poly‐p‐hydroxybenzoate/fibrous wollastonite composites: The influence of hot‐pressing pressure.

Published in:

Polymer Composites, 2025, v. 46, n. 9, p. 8037, doi. 10.1002/pc.29475

By:

Rao, Wei;
Wei, Gang;
Deng, Maoling;
Zhang, Xianyao

Publication type:

Article

Impact of bentonite content on electrical resistivity and compressive strength of cement paste for grounding system applications.

Published in:

Engineering & Applied Science Research, 2025, v. 52, n. 3, p. 260, doi. 10.14456/easr.2025.23

By:

Eua-apiwatch, Sitthiphat;
Arjwech, Rungroj;
Chairojwattana, Apisak;
Kanjanakijkasem, Worasit;
Kanhari, Chaiwat;
Pethrung, Sirichai

Publication type:

Article

低温低密度早强水泥浆体系研究及应用.

Published in:

Drilling Fluid & Completion Fluid, 2025, v. 42, n. 3, p. 392, doi. 10.12358/j.issn.1001-5620.2025.03.016

By:

孙建峰;
付玥颖;
邱卫红;
刘景丽;
赵秋羽;
曹洪昌

Publication type:

Article

The effect of polypropylene fiber on hardened and fresh properties of underwater geopolymer mortar.

Published in:

Structural Concrete, 2025, v. 26, n. 3, p. 3096, doi. 10.1002/suco.70130

By:

Ziada, Mahmoud;
Tanyildizi, Harun;
Coskun, Ahmet;
Seloglu, Maksut

Publication type:

Article

Multi‐objective optimization of green concrete incorporating recycled plastic and sawdust waste as fine aggregates using response surface methodology.

Published in:

Structural Concrete, 2025, v. 26, n. 3, p. 2951, doi. 10.1002/suco.70107

By:

Aldahdooh, Majed A. A.

Publication type:

Article

Proposed multi‐scale models to predict the compressive strength of ultra‐high performance fiber‐reinforced concrete.

Published in:

Structural Concrete, 2025, v. 26, n. 3, p. 2858, doi. 10.1002/suco.202500009

By:

Abdulrahman, Alan Saeed

Publication type:

Article

Sustainable concrete solutions: Evaluating the structural performance of coconut shells as coarse aggregate substitute.

Published in:

Structural Concrete, 2025, v. 26, n. 3, p. 2773, doi. 10.1002/suco.202401159

By:

Boakye, Kingsley Asare;
Tarantsev, Dmitrii;
Ahmed, Mohammed;
Bainge, Gilbert

Publication type:

Article

Evaluating the high‐temperature resistance of self‐compacting mortar incorporating waste andesite powder as a mineral admixture.

Published in:

Structural Concrete, 2025, v. 26, n. 3, p. 2366, doi. 10.1002/suco.202401133

By:

Karataş, Mehmet;
Bozcan, Emre;
Dener, Murat

Publication type:

Article

Predictive modeling of compressive strength in silica fume‐modified self‐compacted concrete: A soft computing approach.

Published in:

Structural Concrete, 2025, v. 26, n. 3, p. 2340, doi. 10.1002/suco.202400931

By:

Abdulrahman, Payam Ismael;
Jaf, Dilshad Kakasor Ismael;
Malla, Sirwan Khuthur;
Mohammed, Ahmed Salih;
Kurda, Rawaz;
Asteris, Panagiotis G.;
Sihag, Parveen

Publication type:

Article

Effect of polypropylene and brass‐coated steel fibers on bond behavior of GFRP bars in normal and high‐strength geopolymer concrete.

Published in:

Structural Concrete, 2025, v. 26, n. 3, p. 2630, doi. 10.1002/suco.202400694

By:

Niyazuddin;
Umesh, B.

Publication type:

Article

Effect of nano‐silica on the mechanical performance and porosity evolution of concrete under freezing and thawing cycles.

Published in:

Structural Concrete, 2025, v. 26, n. 3, p. 2446, doi. 10.1002/suco.202400620

By:

Yang, Yujie;
Xiao, Ting;
Ming, Xuanang

Publication type:

Article

Synergizing machine learning and experimental analysis to predict post‐heating compressive strength in waste concrete.

Published in:

Structural Concrete, 2025, v. 26, n. 3, p. 2916, doi. 10.1002/suco.202400211

By:

Mahmoud, Alaa A.;
El‐Sayed, Alaa A.;
Aboraya, Ayman M.;
Fathy, Islam N.;
Zygouris, Nikos;
Sadollah, Ali;
Agwa, Ibrahim Saad;
Tayeh, Bassam A.;
Asteris, Panagiotis G.

Publication type:

Article

Axial compression performance of slurry‐wrapping recycled aggregate concrete‐filled steel tube short columns under freeze–thaw cycles.

Published in:

Structural Concrete, 2025, v. 26, n. 3, p. 3416, doi. 10.1002/suco.202400179

By:

Wang, Jinhao;
Li, Zhudan;
Cai, Jianguo;
Jin, Baohong

Publication type:

Article

Influence of Sn and Al contents on the microstructure evolution and mechanical performance of stir-cast Mg-3.0Al-0.5Si alloy.

Published in:

Journal of Materials Science, 2025, v. 60, n. 23, p. 9758, doi. 10.1007/s10853-025-10975-7

By:

Nanda, Alok Kumar;
Kumar, Pankaj;
Poddar, Palash;
Sivasubramanian, J.;
Basu, Anindya;
Gupta, Gaurav;
Singh, Sudhanshu Shekhar;
Gupta, Manoj;
Ganguly, Sourav

Publication type:

Article

多源煤基固废充填体强度影响规律及预测.

Published in:

Science Technology & Engineering, 2025, v. 25, n. 16, p. 6690, doi. 10.12404/j.issn.1671-1815.2405757

By:

韩磊;
张继强;
何祥;
许起;
刘云龙;
苏松嵘;
秦宇鹏

Publication type:

Article

Dynamic characteristics of anisotropic shale and rock-breaking efficiency of the axe-shaped tooth under different impact load-bedding angles.

Published in:

Petroleum Science (KeAi Communications Co.), 2025, v. 22, n. 5, p. 2020, doi. 10.1016/j.petsci.2025.03.036

By:

Yan Xi;
Yu Yao;
Hong-Ao Zhao;
Qian Li;
Jun Li;
Ying-Chun Chen

Publication type:

Article