Works matching IS 0032-3888 AND VI 63 AND IP 5 AND DT 2023

Results: 26

Influence of injection molding parameters, melt flow rate, and reinforcing material on the weld‐line characteristics of polypropylene.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1551, doi. 10.1002/pen.26305

By:

Purgleitner, Bianca;
Viljoen, David;
Kühnert, Ines;
Burgstaller, Christoph

Publication type:

Article

Development of propylene butene copolymer/ethylene propylene diene monomer blend foam and the effect of network structure on its reprocessing properties.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1623, doi. 10.1002/pen.26311

By:

Zhou, Wenyan;
Yu, Zhen;
Yang, Lijuan;
Shan, Tikun;
Zhang, Zhenxiu

Publication type:

Article

Synthesis of a novel waterborne diethanolamine‐modified lignin/polyurethane emulsion and its application as an adhesive for polypropylene decorative film on wood‐based panels.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1588, doi. 10.1002/pen.26308

By:

Chang, Liang;
Wang, Yuanwu;
Luo, Shupin;
Gao, Li;
Tang, Qiheng;
Chen, Yongping;
Ren, Yiping

Publication type:

Article

Preparation of polyaniline/cellulose nanofiber composites with enhanced anticorrosion performance for waterborne epoxy resin coatings.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1613, doi. 10.1002/pen.26310

By:

Zhao, Yuxiang;
Huang, Minggang;
Gao, Zhiwei;
He, Heng;
Chen, Yan;
He, Feng;
Lin, Yi;
Yan, Bin;
Chen, Sheng

Publication type:

Article

Shape memory behavior of novel Ethylene Propylene Diene Monomer (EPDM)/paraffin foams.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1633, doi. 10.1002/pen.26312

By:

Bianchi, M.;
Fredi, G.;
Valentini, F.;
Dorigato, A.;
Pegoretti, A.

Publication type:

Article

New 2.5‐D twin screw extruder model for the feed section of a co‐rotating twin screw extruder with comparisons to data.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1528, doi. 10.1002/pen.26303

By:

Campbell, Gregory A.;
Wetzel, Mark D.;
Andersen, Paul;
Golba, Joseph

Publication type:

Article

Thermal and dielectric multiple percolation in α‐Si3N4 whiskers/silicone rubber.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1481, doi. 10.1002/pen.26299

By:

Zhang, Dian;
Liu, Jiawen;
Yang, Xiaofeng;
Liu, Xuan;
Liang, Qingquan;
Liu, Yijun

Publication type:

Article

Influence of material modification and fillers on the dimensional stability and warpage of polypropylene in screw‐extrusion‐based large area additive manufacturing.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1598, doi. 10.1002/pen.26309

By:

Austermann, Johannes;
Kuscera, Renata;
Wipperfürth, Jens;
Hopmann, Christian;
Dahlmann, Rainer

Publication type:

Article

Comparing different data processing methods for determining a Prony series from Dynamic Mechanical Analyzer frequency data.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1459, doi. 10.1002/pen.26297

By:

Adams, J. W.;
Merrett, C. G.

Publication type:

Article

Preparation of high breakdown strength meta‐aramid composite paper reinforced by polyphenylene sulfide superfine fiber.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1579, doi. 10.1002/pen.26307

By:

Zhao, Yuzhen;
Yao, Songjun;
Xiong, Siwei;
Li, Bingyang;
Wang, Xuyi;
Yang, Feihua;
Jia, Yingbin;
Wang, Luoxin;
Wang, Hua

Publication type:

Article

Fabrication of high‐strength magnetically responsive hydrogels by synergistic salting‐out and freezing–thawing and application of their shape deformation and swimming.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1567, doi. 10.1002/pen.26306

By:

Shu, Zhen;
Cao, Qinglong;
Muhammad, Usman;
Zhang, Taoyi;
Ji, Wenxi;
Chen, Jing;
Liu, Cong;
Wei, Yun

Publication type:

Article

Effect of mastic gum integration on improvement of polylactic acid biodegradable films.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1539, doi. 10.1002/pen.26304

By:

Aydogdu Emir, Ayca;
Akgun, Mert;
Kirtil, Emrah

Publication type:

Article

Finite element theoretical and experimental study on the dynamic characteristics of material extrusion thin plates.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1494, doi. 10.1002/pen.26300

By:

Jiang, Shijie;
Chen, Chuangchuang;
Li, Changyou;
Zhao, Chunyu

Publication type:

Article

Thermal‐oxidative aging and tribological properties of carbon nanotube/nitrile butadiene rubber composites with varying acrylonitrile content: Molecular dynamics simulations.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1516, doi. 10.1002/pen.26302

By:

Qian, Cheng;
Li, Yunlong;
Zhao, Jing;
Wang, Shijie;
He, Enqiu

Publication type:

Article

Modification of ricinoleic acid based nonisocyanate polyurethane using polyamine containing polyhedral oligomeric silsesquioxane.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1507, doi. 10.1002/pen.26301

By:

Li, Heng;
Ren, Fang‐Yu;
Li, Hong‐Ru;
He, Liang‐Nian

Publication type:

Article

Dynamic mechanical properties in natural rubber/styrene‐butadiene rubber blends: The local strain behavior in the glass transition region.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1471, doi. 10.1002/pen.26298

By:

Marzocca, A. J.;
Mansilla, M. A.

Publication type:

Article

The influence of cellulose content on the morphology, thermal, and mechanical properties of poly(lactic acid)/Eucomis autumnalis cellulose biocomposites.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1411, doi. 10.1002/pen.26293

By:

Sikhosana, S. T.;
Gumede, T. P.;
Malebo, N. J.;
Ogundeji, A. O.;
Motloung, B.

Publication type:

Article

Preparation of thermal/pH‐sensitive semi‐interpenetrating network hydrogels from quaternary chitosan via an amino‐anhydride click reaction for efficient dye removal from aqueous solutions.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1373, doi. 10.1002/pen.26290

By:

Zhang, Yaqi;
Liu, Yuhua;
Wei, Hongliang;
Hu, Chunwang;
Hua, Bingyan;
Wang, Gang;
Guo, Tao

Publication type:

Article

Fabrication and characterization of cellulose acetate ultrafiltration membrane and its application for efficient bovine serum albumin separation.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1423, doi. 10.1002/pen.26294

By:

Gao, Xiaojie;
Du, Shiheng;
Si, Junhui;
Liu, Xiaolong;
Cui, Zhixiang;
Wang, Qianting

Publication type:

Article

Impact of carbamate formation on the surface tension of epoxy‐amine curing systems.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1347, doi. 10.1002/pen.26288

By:

Shenk, Timothy M.;
Benjamin, Kenneth M.;
Winter, Robb M.

Publication type:

Article

Issue Information.

Published in:: Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1343, doi. 10.1002/pen.26030
Publication type:: Article

Surface modification of silica with polymethylmethacrylate‐co‐methacrylic acid for enhancement of self‐healing performance of natural rubber composites based on metal thiolate ionic network.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1448, doi. 10.1002/pen.26296

By:

Rehman, Abdul;
Ismail, Hanafi;
Sani, Noor Faezah Mohd;
Majid, Noor Aishatun;
Othman, Nadras;
Shuib, Raa Khimi

Publication type:

Article

The efficient detection of Fe3+ by sulfonamidated lignin composite carbon quantum dots.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1439, doi. 10.1002/pen.26295

By:

Lv, Shenghua;
Zhang, Shanshan;
Zuo, Jingjing;
Liang, Shan;
Liu, Leipeng;
Wei, De quan

Publication type:

Article

Electrosprayed curcumin‐zein@polycaprolactone‐mucilage capsules for an improved sustained release.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1359, doi. 10.1002/pen.26289

By:

Shahbazi, Kimia;
Akbari, Iman;
Baniasadi, Hossein

Publication type:

Article

Study on synthesis and mechanical properties of Eu3+‐π/covalent hybrid crosslinked silicone rubber.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1401, doi. 10.1002/pen.26292

By:

Yue, Xuejun;
Zeng, Shangjun;
Sun, Rong;
Li, Yuqaun;
Lu, Ai;
Kang, Ming;
Yu, Fengmei

Publication type:

Article

The mechanical and thermal properties of natural rubber/zinc methacrylate composites by latex compounding techniques.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 5, p. 1388, doi. 10.1002/pen.26291

By:

Chen, Jing;
Liao, Lusheng;
Zhang, Fuquan;
Hu, Siwen;
JiaYing, Huang;
Shuyun, Shen;
Dongning, He;
Mingyue, Xue

Publication type:

Article

Works matching IS 0032-3888 AND VI 63 AND IP 5 AND DT 2023

Influence of injection molding parameters, melt flow rate, and reinforcing material on the weld‐line characteristics of polypropylene.

Development of propylene butene copolymer/ethylene propylene diene monomer blend foam and the effect of network structure on its reprocessing properties.

Synthesis of a novel waterborne diethanolamine‐modified lignin/polyurethane emulsion and its application as an adhesive for polypropylene decorative film on wood‐based panels.

Preparation of polyaniline/cellulose nanofiber composites with enhanced anticorrosion performance for waterborne epoxy resin coatings.

Shape memory behavior of novel Ethylene Propylene Diene Monomer (EPDM)/paraffin foams.

New 2.5‐D twin screw extruder model for the feed section of a co‐rotating twin screw extruder with comparisons to data.

Thermal and dielectric multiple percolation in α‐Si<sub>3</sub>N<sub>4</sub> whiskers/silicone rubber.

Influence of material modification and fillers on the dimensional stability and warpage of polypropylene in screw‐extrusion‐based large area additive manufacturing.

Comparing different data processing methods for determining a Prony series from Dynamic Mechanical Analyzer frequency data.

Preparation of high breakdown strength meta‐aramid composite paper reinforced by polyphenylene sulfide superfine fiber.

Fabrication of high‐strength magnetically responsive hydrogels by synergistic salting‐out and freezing–thawing and application of their shape deformation and swimming.

Effect of mastic gum integration on improvement of polylactic acid biodegradable films.

Finite element theoretical and experimental study on the dynamic characteristics of material extrusion thin plates.

Thermal‐oxidative aging and tribological properties of carbon nanotube/nitrile butadiene rubber composites with varying acrylonitrile content: Molecular dynamics simulations.

Modification of ricinoleic acid based nonisocyanate polyurethane using polyamine containing polyhedral oligomeric silsesquioxane.

Dynamic mechanical properties in natural rubber/styrene‐butadiene rubber blends: The local strain behavior in the glass transition region.

The influence of cellulose content on the morphology, thermal, and mechanical properties of poly(lactic acid)/Eucomis autumnalis cellulose biocomposites.

Preparation of thermal/pH‐sensitive semi‐interpenetrating network hydrogels from quaternary chitosan via an amino‐anhydride click reaction for efficient dye removal from aqueous solutions.

Fabrication and characterization of cellulose acetate ultrafiltration membrane and its application for efficient bovine serum albumin separation.

Impact of carbamate formation on the surface tension of epoxy‐amine curing systems.

Issue Information.

Surface modification of silica with polymethylmethacrylate‐co‐methacrylic acid for enhancement of self‐healing performance of natural rubber composites based on metal thiolate ionic network.

The efficient detection of Fe<sup>3+</sup> by sulfonamidated lignin composite carbon quantum dots.

Electrosprayed curcumin‐zein@polycaprolactone‐mucilage capsules for an improved sustained release.

Study on synthesis and mechanical properties of Eu<sup>3+</sup>‐π/covalent hybrid crosslinked silicone rubber.

The mechanical and thermal properties of natural rubber/zinc methacrylate composites by latex compounding techniques.