Works matching IS 25097075 AND DT 2021 AND VI 4 AND IP 2-4

Results: 330

Distortional buckling of compressed cold‐formed lipped C channels via buckling mode shapes.

Published in:: CE/Papers, 2021, v. 4, n. 2-4, p. 2535, doi. 10.1002/cepa.1587
Publication type:: Article

Fire design proposal for members with cold‐formed lipped channel and sigma sections under compression.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 1447, doi. 10.1002/cepa.1585

By:

Arrais, Flávio;
Lopes, Nuno;
Real, Paulo Vila

Publication type:

Article

The influence of driving imperfections on the water pressure resistance of HZ<sup>®</sup>‐M/AZ walls.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2527, doi. 10.1002/cepa.1584

By:

Chrzanowski, Maciej;
Boueiz, Perla El;
Matos, Rui;
Zillgen, Heiko;
Even, Boris

Publication type:

Article

Proceedings of Eurosteel 2021: Sheffield 1–3 September 2021.

Published in:: CE/Papers, 2021, v. 4, n. 2-4, p. 1, doi. 10.1002/cepa.1583
Publication type:: Article

Numerical analysis of the stress‐strain behaviour in statically determinate composite steel‐concrete beam after 100 years creep phenomena process using Volterra Integral Equations.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 1183, doi. 10.1002/cepa.1582

By:

Kazakov, Konstantin;
Stoyanov, Chavdar;
Partov, Doncho;
Kantchev, Vesselin

Publication type:

Article

The Effect of Steel Strength on the Behavior of a K‐Joint in a Slim‐floor Truss.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2517, doi. 10.1002/cepa.1581

By:

Saremi, Pooya;
Lu, Wei;
Puttonen, Jari;
Pada, Dan;
Kesti, Jyrki

Publication type:

Article

Ultimate Strength of K‐joints in Lattice Structures Composed of Circular Hollow Sections (CHS).

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2508, doi. 10.1002/cepa.1580

By:

Đuričić, Đorđe;
Marković, Zlatko;
Janković, Milena;
Lučić, Duško

Publication type:

Article

Effect of weld residual stress on fatigue strength.

Published in:: CE/Papers, 2021, v. 4, n. 2-4, p. 2504, doi. 10.1002/cepa.1579
Publication type:: Article

Numerical assessment of stainless steel tubular T‐joints subjected to brace and chord axial forces.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2495, doi. 10.1002/cepa.1578

By:

Nogueira, Mateus M.;
de Lima, Luciano R. O.;
da S. Vellasco, Pedro C. G.;
Young, Ben

Publication type:

Article

Strain Design Limit for Hollow Section Joints.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2488, doi. 10.1002/cepa.1577

By:

Kožich, Matyáš;
Jehlička, Petr;
Kuříková, Marta;
Wald, František;
Bu, Xiao‐Ding;
Packer, Jeffrey A.;
Kabeláč, Jaromír

Publication type:

Article

Diffusible Hydrogen Concentration in Draw Arc Stud Weldments.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2481, doi. 10.1002/cepa.1576

By:

Brätz, Oliver;
Henkel, Knuth‐Michael

Publication type:

Article

Influence of energy input on the strength and hardness of welded joints.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2472, doi. 10.1002/cepa.1575

By:

Kästner, Thoralf;
Stroetmann, Richard

Publication type:

Article

Peculiarities of resistance definition for welded offset T‐joint between RHS members.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2465, doi. 10.1002/cepa.1574

By:

Kalmykova, Svitlana;
Wald, František

Publication type:

Article

Stiffness of equal width welded I‐beam to RHS column connection.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2459, doi. 10.1002/cepa.1573

By:

López‐Colina, Carlos;
Serrano, Miguel A.;
Lozano, Miguel;
Gayarre, Fernando L.;
Suárez, Jesús M.

Publication type:

Article

Laser tube technology ‐ A new automation procedure in end‐preparation of CHS‐to‐CHS intersections welded by partial joint penetration (PJP): design, constructional and experimental remarks.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2451, doi. 10.1002/cepa.1572

By:

Mastropasqua, Augusto;
Majowiecki, Massimo;
Duarte, Claudio

Publication type:

Article

Steel based retrofitting interventions for existing masonry walls: a comparative numerical investigation.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2442, doi. 10.1002/cepa.1571

By:

Zizi, Mattia;
Vari, Alessandro;
Colajanni, Piero;
De Matteis, Gianfranco

Publication type:

Article

Optimized welding processes for the repair and strengthening of structures made of old mild steels.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2434, doi. 10.1002/cepa.1570

By:

Sieber, Lars;
Flederer, Holger

Publication type:

Article

Sustainable Housing Provision: A Case for the Vertical Extension of Steel Framed Buildings.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2425, doi. 10.1002/cepa.1569

By:

Gillott, Charles;
Densley‐Tingley, Danielle;
Davison, Buick

Publication type:

Article

Strain measurements on rails of crane runway girders to predict accurate wheel loads.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2415, doi. 10.1002/cepa.1568

By:

Zauchner, Paul;
Kettler, Markus;
Unterweger, Harald

Publication type:

Article

Reusability of existing structural steel.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2403, doi. 10.1002/cepa.1567

By:

Coelho, Ana M. Girão;
Pimentel, Ricardo;
Sansom, Michael

Publication type:

Article

Holistic Life‐Cycle Analysis of Bridge Solutions.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2393, doi. 10.1002/cepa.1566

By:

Zinke, Tim;
Hechler, Oliver;
Rademacher, Dennis

Publication type:

Article

Experimental behaviour of Wire‐and‐Arc Additively Manufactured stainless steel rods.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2387, doi. 10.1002/cepa.1565

By:

Laghi, Vittoria;
Palermo, Michele;
Silvestri, Stefano;
Gasparini, Giada;
Trombetti, Tomaso

Publication type:

Article

Design and Construction of the Lille Langebro, Copenhagen.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2382, doi. 10.1002/cepa.1564

By:

Fryer, Simon;
Eckhart, Thomas;
Nugent, Peter

Publication type:

Article

Steel Structure Prediction Model for Fixed Roof Oil Tanks.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2375, doi. 10.1002/cepa.1563

By:

Denic, Uros;
Spremic, Milan

Publication type:

Article

APK: a network to improve the interest in steel construction.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2364, doi. 10.1002/cepa.1562

By:

Muzeau, Jean‐Pierre;
Silva, Loïc Da

Publication type:

Article

Challenges in the Design and Implementation of a Steel Beam Launcher for Precast Girders Assembly.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2356, doi. 10.1002/cepa.1561

By:

Rodríguez, Patricia García;
Cruz, Jesús Tomás Muñoz;
García, Manuel Biedma;
Llanos, Fernando Flórez;
Cañueto, Mariano Martín

Publication type:

Article

Recent developments of stainless steels in structural applications.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2349, doi. 10.1002/cepa.1560

By:

Backhouse, Andrew;
Baddoo, Nancy

Publication type:

Article

Structural performance evaluation of square hollow section column under compressive axial force with bending moment having different width‐thickness ratio.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2341, doi. 10.1002/cepa.1559

By:

Hayashi, Takuro;
Sato, Atsushi;
Yoshioka, Shimpei

Publication type:

Article

A Simplified Approach for Seismic Performances Estimation for Steel Moment Resisting Frames.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2335, doi. 10.1002/cepa.1558

By:

Nastri, Elide;
Montuori, Rosario;
Piluso, Vincenzo;
Todisco, Paolo

Publication type:

Article

Rotational Stability of Plastic Hinges.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2325, doi. 10.1002/cepa.1557

By:

Roberts, Michael J;
Davies, J Michael

Publication type:

Article

Examination of Structural System of Hales Turgus Vilnius Shopping Center, Constructed with Iron and Steel in 1906.

Published in:: CE/Papers, 2021, v. 4, n. 2-4, p. 2322, doi. 10.1002/cepa.1556
Publication type:: Article

A review of applied methods of optimization in steel structures.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2315, doi. 10.1002/cepa.1555

By:

Kazem, Alireza;
Matinrad, Pantea

Publication type:

Article

Investigation on Failure Mechanisms of Symmetric and Asymmetric Cellular Steel Beams.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2308, doi. 10.1002/cepa.1554

By:

Sehwail, Mohammad;
Celikag, Murude

Publication type:

Article

On the use of systems for tests on stainless steel members and frames aimed at interoperability.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2299, doi. 10.1002/cepa.1553

By:

Chacón, Rolando;
Puig‐Polo, Càrol;
Real, Esther

Publication type:

Article

Weight optimization of stainless‐steel built‐up structural elements.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2295, doi. 10.1002/cepa.1552

By:

Venslavavičiūtė, Raminta;
Daniūnas, Alfonsas

Publication type:

Article

Pseudo‐dynamic testing of a full‐scale two‐storey steel building with RBS connections.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2285, doi. 10.1002/cepa.1551

By:

Di Benedetto, Sabatino;
Francavilla, Antonella Bianca;
Latour, Massimo;
Cavallaro, Giovanni Ferrante;
Piluso, Vincenzo;
Rizzano, Gianvittorio

Publication type:

Article

Numerical investigations on built‐up cold‐formed steel beams for long spans.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2277, doi. 10.1002/cepa.1550

By:

Ungureanu, Viorel;
Luka•ević, Ivan;
Both, Ioan;
Dubina, Dan

Publication type:

Article

Buckling problems of patch loaded plates with and without stiffeners – analytical approach.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2271, doi. 10.1002/cepa.1549

By:

Mijušković, Olga;
Žugić, Ljiljana;
Šćepanović, Biljana;
Ćorić, Branislav

Publication type:

Article

Lateral‐Torsional Buckling of beams with warping restraints at Supports.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2262, doi. 10.1002/cepa.1548

By:

Lebastard, Maxime;
Couchaux, Maël;
Bureau, Alain;
Hjiaj, Mohammed

Publication type:

Article

Experimental study of welded austenitic stainless steel I‐section beam‐columns.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2255, doi. 10.1002/cepa.1547

By:

Feber, Nina;
Jandera, Michal;
Rossi, Barbara;
Kremen, Tomas

Publication type:

Article

Study of Second‐order Effects of Steel Posts Supporting Rockfall Flexible Barriers.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2249, doi. 10.1002/cepa.1546

By:

He, Jian‐Wei;
Zhao, Lei;
Liu, Yao‐Peng;
Chan, Siu‐Lai

Publication type:

Article

Stabilizing forces in trapezoidal sheeting used as a part of the bracing system.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2242, doi. 10.1002/cepa.1545

By:

Korcz‐Konkol, Natalia;
Iwicki, Piotr

Publication type:

Article

Flexural buckling resistance of rectangular welded box section columns.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2232, doi. 10.1002/cepa.1544

By:

Somodi, Balázs;
Kövesdi, Balázs

Publication type:

Article

Shear Strengthening of Slender Steel Beams Using Cold‐formed Stiffeners and Adhesives.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2225, doi. 10.1002/cepa.1543

By:

de Sousa Cardoso, Hermano;
Martins, João Pedro;
da Silva, Luis Simões

Publication type:

Article

Analytical design method for the improvement of steel structures stability.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2221, doi. 10.1002/cepa.1542

By:

Bové, Oriol;
Casafont, Miquel;
Ferrer, Miquel;
López‐Almansa, Francesc;
Roure, Francesc

Publication type:

Article

Imperfections of LTB tests with directionally true loading using the extended Southwell‐method.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2215, doi. 10.1002/cepa.1541

By:

Nonn, Jonas;
Feldmann, Markus

Publication type:

Article

Simplified design method for stiffened cellular beams against web‐post buckling.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2207, doi. 10.1002/cepa.1540

By:

Glorieux, Antoine;
Cajot, Louis‐Guy;
Hanus, François

Publication type:

Article

Stability Study of Cantilever‐Beams – Numerical Analysis and Analytical Calculation (LTB).

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2199, doi. 10.1002/cepa.1539

By:

Kraus, Matthias;
Crişan, Nicolae‐Andrei;
Wittor, Björn

Publication type:

Article

Bolted angle members in compression –new design model including joint stiffness.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2191, doi. 10.1002/cepa.1538

By:

Unterweger, Harald;
Kettler, Markus;
Zauchner, Paul

Publication type:

Article

Imperfection sensitivity study of hot‐rolled and laser‐welded stainless steel angle columns.

Published in:

CE/Papers, 2021, v. 4, n. 2-4, p. 2183, doi. 10.1002/cepa.1537

By:

Filipović, Aljoša;
Dobrić, Jelena;
Marković, Zlatko;
Baddoo, Nancy

Publication type:

Article