Works matching IS 2229838X AND DT 2024 AND VI 16 AND IP 6

Results: 30

Extend Product Shelf Life to Minimize Customer Complaints by Using Selected Packaging Materials.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 329, doi. 10.30880/ijie.2024.16.06.030
By:
- Rusman, Oktalia;
- Sriwana, Iphov Kumala;
- Prambudia, Yudha
Publication type:
Article
Country-Specific CO2 and Non-CO2 Emission Factor for Coal Electricity Generation in Malaysia.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 310, doi. 10.30880/ijie.2024.16.06.029
By:
- Ahmad, Radin Diana R.;
- Abdullah, Kamil;
- Zakaria, Sazalina;
- Shah Raja Ehsan Shah, Raja Shazrin;
- YuanJi Mok;
- Sulaiman, Nik Meriam
Publication type:
Article
Predictive Model and Optimisation of MQL Mist Flow Velocity Through CFD Analysis.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 294, doi. 10.30880/ijie.2024.16.06.028
By:
- Zulkifli, Zulaika;
- Abdul Halim, Nurul Hayati;
- Solihin, Zainoor Hailmee;
- Mohamad Fauzee, Nur Fatini;
- Hadi, Musfirah Abdul
Publication type:
Article
Optimizing Bionic Prosthetic Finger 3D Topology Design and Comprehensive Testing of Fully Compliant Mechanisms.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 285, doi. 10.30880/ijie.2024.16.06.027
By:
- Sollapur, Shrishail B.;
- Dakhole, Mangesh Y.;
- Suryawanshi, Shubham R.;
- Achmelwar, Nitisha;
- Kumar, Vishnu Vijay;
- Bakar, Suriani Abu
Publication type:
Article
A Comprehensive Review of Modeling Approaches for Analyzing Mechanical Properties and Fatigue Performance in Magnesium Alloys.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 265, doi. 10.30880/ijie.2024.16.06.026
By:
- Kumar, Raj;
- Mursaleen, Mohammad;
- Harmain, G. A.
Publication type:
Article
Investigating the Effect of Porosity and Pore Shape on Porous Polymer Structure Under Axial Compression and Buckling Behaviour.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 254, doi. 10.30880/ijie.2024.16.06.025
By:
- bin Mohd Yusof, Ab Aziz
Publication type:
Article
A Study on Milling Parameters for Enhanced Surface Quality of FDM-Printed PLA Parts.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 246, doi. 10.30880/ijie.2024.16.06.024
By:
- Felhő, Csaba;
- Mehdiyev, Ziya
Publication type:
Article
Functionality and Reliability Improvement of Lifting Mechanism System in The Drone Docking Station Using TRIZ.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 238, doi. 10.30880/ijie.2024.16.06.023
By:
- Muhammad, Rawaida;
- Salim, Mohd Azli;
- Akop, Mohd Zaid;
- Saad, Adzni Md.;
- Photong, Chonlatee
Publication type:
Article
Tapered Bladed of Vertical Axis Wind Turbine for Powering Street Lights in Urban Areas in Indonesia with Wind Speed of 2-4 m/s.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 228, doi. 10.30880/ijie.2024.16.06.022
By:
- Soetanto, Maria Fransisca;
- Astor, Yackob;
- Wibowo, Singgih Satrio;
- Syaiful;
- Zuhri, Muhammad Rizki;
- Luthfi, Mochammad
Publication type:
Article
A Sensitivity Study of the Mathematical Model for Carbon Dioxide Removal by Physical Absorption in the Production of Biomethane from Palm Empty Fruit Bunch.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 216, doi. 10.30880/ijie.2024.16.06.021
By:
- Mohd Asrul, Mohamad Afiq;
- Halim Yun, Hafizah Abdul;
- Atan, Mohd Farid;
- Wei Tan, Ivy Ai;
- Chang Hui Lai, Josephine
Publication type:
Article
Mechanical Properties of Thulium-doped Bismuth Borotellurite Glass via Nanoindentation for Lead-Free Radiation Shielding Application.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 206, doi. 10.30880/ijie.2024.16.06.020
By:
- Mat Rusni, Nur Arina;
- Amat, Azuraida;
- Wan Yusoff, Wan Yusmawati;
- Abdul-Manaf, Nor Azlian;
- Ahmad, Nurazlin
Publication type:
Article
Effect of Fire-Retardant Ratios in Kenaf Fiber for Fire Resistance Properties and Acoustical Performance.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 196, doi. 10.30880/ijie.2024.16.06.019
By:
- Zalkis Ayol, Myia Yuzrina;
- Yaakob, Mohd Yuhazri;
- Tomy, Meryl Anyie;
- Mohamed, Kamarul Amir;
- Wan Mahmood, Wan Hasrulnizzam;
- Abdul Rashid, Azrin Hani;
- Jusuf, Zulfikar Achmad
Publication type:
Article
Impact of UHMWPE and PP Polymer Characterization on the Blending Process for PP/UHMWPE Composite in FFF.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 182, doi. 10.30880/ijie.2024.16.06.018
By:
- Aiman, Fakrul Nur;
- K., Kamarudin;
- Jamian, Rahim;
- Shufeng Sun;
- Shaari, M. F.;
- Roslan, Mohd Nazrul;
- Ahmad, A.;
- M. S., Mohd Khairuddin;
- I., Raman
Publication type:
Article
Safety Helmet Fit Assessment Using 3D Scanning and Helmet Fit Index (HFI).
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 172, doi. 10.30880/ijie.2024.16.06.017
By:
- Azlan, Syahrizan;
- Najiha Muhamad Dzahir, Nur Fitrah;
- El Bakri, Helmy Mustafa;
- Mahmood, Salwa
Publication type:
Article
Moisture and Compression Properties of Different Composition of Kenaf/Bamboo/Polyester Thermal Bonded Nonwoven Web for Mattress Filler.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 165, doi. 10.30880/ijie.2024.16.06.016
By:
- Zulhizad, Noraishah;
- Abdul Rashid, Azrin Hani;
- Abd Haris, Nurul Arisya;
- Shaari, Muhammad Farid;
- Mohd Rosli, Mohd Afzanizam;
- Rashid, Ahmad Safuan A.;
- Mohd Tahir, Abdussalam Al-hakimi;
- Rajput, Abdul Waqar
Publication type:
Article
Numerical Analysis on the Performance of Aerodynamic Devices on a Car Using CFD.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 154, doi. 10.30880/ijie.2024.16.06.015
By:
- Ramachandran, Lingamoorthy;
- Ishak, Izuan Amin;
- Arafat, Mohammad;
- Zolpakar, Nor Atiqah;
- Zainal Abidin, Shaiful Fadzil;
- Harun, Dalila Mohd
Publication type:
Article
Microstructure and Phase Chemistry of Vacuum Induction Melting Fabricated-Equimolar AlCoCrFeNi HEA During Spinodal Dissolution Annealing.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 145, doi. 10.30880/ijie.2024.16.06.014
By:
- Hussain, Mudassar;
- Mohd Najib, Abdillah Sani;
- Fadil, Nor Akmal;
- Abu Bakar, Tuty Asma
Publication type:
Article
Energy Absorption Performance of Hybrid Bamboo Fibre/Aluminium Mesh Reinforced Polymer Composites Subjected to Axial Crushing Loads.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 130, doi. 10.30880/ijie.2024.16.06.013
By:
- Nik Ismail, Nik Ainun;
- Roslan, Mohd Nazrul;
- Ismail, Al Emran;
- Anwar Uyup, Mohd Khairun
Publication type:
Article
Optimum Microencapsulation Conditions of Lemongrass Essential Oil Microcapsule Using Complex Coacervation Method.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 119, doi. 10.30880/ijie.2024.16.06.012
By:
- Arina Johan, Nur Ain;
- Hassan, Hanis Athirah;
- Nasir, Siti Hana;
- Rehan, Aisyah Mohamed;
- Khadmudin, Dzulqarnain;
- Yahya, Mohamad Faizul
Publication type:
Article
Mechanical Uniaxial Tensile Performance of Hybrid Glass/Carbon Woven Composites.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 111, doi. 10.30880/ijie.2024.16.06.011
By:
- Faris Mohd Zulkifli, Muhammad Nasrun;
- Yahya, Mohamad Faizul
Publication type:
Article
Comparative Analysis of Modular Pin-Fin Heat Sink Performance: Influence of Geometric Variation on Heat Transfer Characteristics.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 100, doi. 10.30880/ijie.2024.16.06.010
By:
- Cindi Alfian, Devia Gahana;
- Silitonga, Dicky Januarizky;
- Al Fajri Ramadhan, Muhammad;
- Ridhwan, Ihsan Naufal;
- Utomo, Rionaldi Prasetyo;
- Rudiarta, I. Made
Publication type:
Article
Mesh Refinement for Dynamics Airflow in Health Care.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 90, doi. 10.30880/ijie.2024.16.06.009
By:
- Rosminahar, Siti Najiah;
- Hidayat Mat, Mohamad Nur;
- Yusup, Eliza M.
Publication type:
Article
Microstructural Evolution of Intermetallic Compound Between SN100C Solder and ENIMAG Substrate During Isothermal Ageing.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 80, doi. 10.30880/ijie.2024.16.06.008
By:
- Izzah Nabilah, A. A. Dayang;
- Pavithiran, N.;
- Kozutsumi, Y.;
- Azlina, O. Saliza
Publication type:
Article
Solar Energy Challenges for Rural Electrification: Case Study of Lower-Shabelle Region of Somalia.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 70, doi. 10.30880/ijie.2024.16.06.007
By:
- Mohamed, Mohamed Adam;
- Osman, Shahrul Azmir;
- Nasir, Nurul Fitriah
Publication type:
Article
Correlation Effect on Different Temperature-Humidity Range of Highly Thermal GNP/AG/ SA Conductive Ink.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 58, doi. 10.30880/ijie.2024.16.06.006
By:
- Noor, Norida Mohammad;
- Salim, Mohd Azli;
- Masipan, Nor Azmmi;
- Saad, Adzni Md.;
- Photong, Chonlatee;
- Akop, Mohd Zaid
Publication type:
Article
Effect of Process Parameters on the Tensile Strength of the Developed Composite of Al 6065 in Stir Casting Process.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 46, doi. 10.30880/ijie.2024.16.06.005
By:
- Yadav, Rajat;
- Dwivedi, Vijay Kumar
Publication type:
Article
Evaluation of Micro Hardness of Magnesium Alloy Coated with ZnO and Al2O3.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 21, doi. 10.30880/ijie.2024.16.06.003
By:
- Chandra, Divya;
- Chauhan, Nathi Ram
Publication type:
Article
Assessment of Wire Offset While Machining EN-24 on WEDM.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 10, doi. 10.30880/ijie.2024.16.06.002
By:
- Husain Rizvi, Syed Asghar;
- Verma, Durgesh;
- Kisan, Unni
Publication type:
Article
High Temperature Corrosion Study on NiCr Coated Low Alloy and Mild Steel.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 1, doi. 10.30880/ijie.2024.16.06.001
By:
- Kumar, Jitendra;
- Kushwaha, Anshika;
- Rajput, Sunil Kumar;
- Soota, Tarun
Publication type:
Article
Comparative Study of Thermal Criteria and Fluid-Flow Criteria in Micro and Mini Channel Design Constrains with or without Insert Made of Aluminum Material.
Published in:
International Journal of Integrated Engineering (IJIE), 2024, v. 16, n. 6, p. 31, doi. 10.30880/ijie.2024.16.06.004
By:
- Kaushik, Shivasheesh;
- Mehta, Jagdish Singh;
- Singh, Satyendra;
- Mahar, Vikas Singh;
- Srivastav, Ayushman;
- Kanoji, Nikhil;
- Kumar, Raja;
- Vashisth, Samriddhi;
- Karki, Shubham Singh;
- Kumar, Amit;
- Bhandari, Prabhakar;
- Singh, Desh Bandhu
Publication type:
Article

Works matching IS 2229838X AND DT 2024 AND VI 16 AND IP 6

Extend Product Shelf Life to Minimize Customer Complaints by Using Selected Packaging Materials.

Country-Specific CO<sub>2</sub> and Non-CO<sub>2</sub> Emission Factor for Coal Electricity Generation in Malaysia.

Predictive Model and Optimisation of MQL Mist Flow Velocity Through CFD Analysis.

Optimizing Bionic Prosthetic Finger 3D Topology Design and Comprehensive Testing of Fully Compliant Mechanisms.

A Comprehensive Review of Modeling Approaches for Analyzing Mechanical Properties and Fatigue Performance in Magnesium Alloys.

Investigating the Effect of Porosity and Pore Shape on Porous Polymer Structure Under Axial Compression and Buckling Behaviour.

A Study on Milling Parameters for Enhanced Surface Quality of FDM-Printed PLA Parts.

Functionality and Reliability Improvement of Lifting Mechanism System in The Drone Docking Station Using TRIZ.

Tapered Bladed of Vertical Axis Wind Turbine for Powering Street Lights in Urban Areas in Indonesia with Wind Speed of 2-4 m/s.

A Sensitivity Study of the Mathematical Model for Carbon Dioxide Removal by Physical Absorption in the Production of Biomethane from Palm Empty Fruit Bunch.

Mechanical Properties of Thulium-doped Bismuth Borotellurite Glass via Nanoindentation for Lead-Free Radiation Shielding Application.

Effect of Fire-Retardant Ratios in Kenaf Fiber for Fire Resistance Properties and Acoustical Performance.

Impact of UHMWPE and PP Polymer Characterization on the Blending Process for PP/UHMWPE Composite in FFF.

Safety Helmet Fit Assessment Using 3D Scanning and Helmet Fit Index (HFI).

Moisture and Compression Properties of Different Composition of Kenaf/Bamboo/Polyester Thermal Bonded Nonwoven Web for Mattress Filler.

Numerical Analysis on the Performance of Aerodynamic Devices on a Car Using CFD.

Microstructure and Phase Chemistry of Vacuum Induction Melting Fabricated-Equimolar AlCoCrFeNi HEA During Spinodal Dissolution Annealing.

Energy Absorption Performance of Hybrid Bamboo Fibre/Aluminium Mesh Reinforced Polymer Composites Subjected to Axial Crushing Loads.

Optimum Microencapsulation Conditions of Lemongrass Essential Oil Microcapsule Using Complex Coacervation Method.

Mechanical Uniaxial Tensile Performance of Hybrid Glass/Carbon Woven Composites.

Comparative Analysis of Modular Pin-Fin Heat Sink Performance: Influence of Geometric Variation on Heat Transfer Characteristics.

Mesh Refinement for Dynamics Airflow in Health Care.

Microstructural Evolution of Intermetallic Compound Between SN100C Solder and ENIMAG Substrate During Isothermal Ageing.

Solar Energy Challenges for Rural Electrification: Case Study of Lower-Shabelle Region of Somalia.

Correlation Effect on Different Temperature-Humidity Range of Highly Thermal GNP/AG/ SA Conductive Ink.

Effect of Process Parameters on the Tensile Strength of the Developed Composite of Al 6065 in Stir Casting Process.

Evaluation of Micro Hardness of Magnesium Alloy Coated with ZnO and Al<sub>2</sub>O<sub>3</sub>.

Assessment of Wire Offset While Machining EN-24 on WEDM.

High Temperature Corrosion Study on NiCr Coated Low Alloy and Mild Steel.

Comparative Study of Thermal Criteria and Fluid-Flow Criteria in Micro and Mini Channel Design Constrains with or without Insert Made of Aluminum Material.