Works matching IS 2193567X AND DT 2025 AND VI 50 AND IP 4

Results: 40

Effects of Combined Utilization of Active Cooler/Heater and Blade-Shaped Nanoparticles in Base Fluid for Performance Improvement of Thermoelectric Generator Mounted in Between Vented Cavities.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2925, doi. 10.1007/s13369-025-09972-4

By:

Selimefendigil, Fatih;
Oztop, Hakan F.

Publication type:

Article

Advancements in Vertical Axis Wind Turbine Technologies: A Comprehensive Review.

Published in:

2025

By:

Seifi Davari, Hossein;
Seify Davari, Mohsen;
Botez, Ruxandra Mihaela;
Chowdhury, Harun

Publication type:

Literature Review

Modeling of Textured Hydrostatic Thrust Bearings and Lubricating Films with Variable Thickness.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2911, doi. 10.1007/s13369-024-09645-8

By:

Aboshighiba, Hicham;
Benariba, Aboubakeur;
Sbaa, Mohamed Rida;
Souad, Makhfi;
Sidamar, Lamsadfa;
Suleiman, Rami Khalid;
Abu-Rayyan, Ahmed;
Meliani, Mohammed Hadj

Publication type:

Article

Comparative Analysis of Hybrid and Active Cooling Systems for Concentrated Photovoltaic Panels Using a 1-D Mathematical Model: A Distinctive Perspective.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2891, doi. 10.1007/s13369-024-09343-5

By:

Şimşek, Engin;
Ökten, Korhan

Publication type:

Article

Insight into Natural Convection and Magnetic Energy Dynamics within a Triple Enclosure Filled with Ferrofluid.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2857, doi. 10.1007/s13369-024-09301-1

By:

Ben Hamida, Mohamed Bechir;
Hajjar, Ahmad;
AlGhamdi, AbdulAziz A.;
Izadi, Mohsen;
Mohamed, Mohamed H.;
Alqurashi, Faris

Publication type:

Article

Optimal Selection of a Sustainable Passive Heat Transfer Enhancement Technique for Circular Pipe Heat Exchanger Using MCDM Framework.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2835, doi. 10.1007/s13369-024-09289-8

By:

Soumith, V.;
Biswas, A.;
Nath, S.

Publication type:

Article

Uniformly Loaded Logarithmic Beam Mode with Spatially Varying Flexural Rigidity.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2823, doi. 10.1007/s13369-024-09275-0

By:

Turkyilmazoglu, Mustafa

Publication type:

Article

Impact of Temperature-Induced Buoyancy on the 2DOF-VIV of a Heated/Cooled Cylinder.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2807, doi. 10.1007/s13369-024-09262-5

By:

Esmaeili, Mostafa;
Fakhri Vayqan, Hossein;
Rabiee, Amir Hossein

Publication type:

Article

Nonlinear Finite Element Thermal Modeling of Casson Flow in Sinusoidal Chamber with Lorentz's Force.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2627, doi. 10.1007/s13369-024-09243-8

By:

Afrin, Sajia;
Nasrin, R.

Publication type:

Article

Abrasive Jet Polishing Utilizing the Synergistic Effect of Ultrasonic Pulse-Cavitation and Process Optimization Research.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2467, doi. 10.1007/s13369-024-09242-9

By:

Ren, Yile;
Ge, Jiangqin;
Shao, Bilu;
Xu, Kengqing

Publication type:

Article

Automated Metal Surface Flaws Detection Using Convolutional Neural Network and Deep Visualization Analysis.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2795, doi. 10.1007/s13369-024-09230-z

By:

Yedukondalu, Jammisetty;
Karaddi, Sahebgoud Hanamantray;
Bindu, C. H. Hima;
Sharma, Diksha;
Sarkar, Achintya Kumar;
Sharma, Lakhan Dev

Publication type:

Article

Optimization Design and Internal Flow Characteristics Analysis Based on Latin Hypercube Sampling Method.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2715, doi. 10.1007/s13369-024-09229-6

By:

Peng, Guangjie;
Ma, Lie;
Hong, Shiming;
Ji, Guangchao;
Chang, Hao

Publication type:

Article

Early Detection of Secondary Battery Degradation by Infrared Technology: An Experimental Study.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2527, doi. 10.1007/s13369-024-09219-8

By:

Ni, Shuo;
Lama, Sanjeeb;
Lee, Young-Jun;
Kim, Joo-Hyung

Publication type:

Article

A Hybrid Algorithm-Based Comparative Analysis of a Newly Designed Tool Holder During the Machining of Hastelloy-B3 with MQL.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2691, doi. 10.1007/s13369-024-09218-9

By:

Murali, T.;
Devendiran, S.;
Venkatesan, K.

Publication type:

Article

Three-Dimensional Numerical Studies on Optimizing the Discharge Coefficient of Screech Holes Resembling that of an Afterburner Using CFD Technique.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2779, doi. 10.1007/s13369-024-09217-w

By:

Iyengar, Sharan Yoganand;
Ravi, Dineshkumar;
John, Bibin;
Paramasivam, Senthilkumar;
Rajagopal, Thundil Karuppa Raj

Publication type:

Article

Analysis of Post-expansion Performance of Expansion Liner Hanger Based on Surface Texture.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2875, doi. 10.1007/s13369-024-09204-1

By:

Shi, Changshuai;
Yuan, Zhaosu;
Ren, Meipeng;
Zhu, Xiaohua;
Wang, Junyan

Publication type:

Article

Blade Exit Angle Impact on Centrifugal Pump Performance: Entropy Generation and Fluid–Structure Interaction Analysis.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2509, doi. 10.1007/s13369-024-09200-5

By:

Sakran, Hayder Kareem;
Abdul Aziz, Mohd Sharizal;
Khor, C. Y.

Publication type:

Article

Effect of Number of Channels on Performance of PEM Fuel Cells for Serpentine Type Channel Configuration.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2595, doi. 10.1007/s13369-024-09199-9

By:

Işıklı, Fırat;
Işıklı, Hazal;
Sürmen, Ali

Publication type:

Article

A Study on Optimization of Grid-Layout Earth-to-Air Heat Exchangers (EAHEs) at Constant Total Heat Transfer Surface by using Taguchi Method.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2455, doi. 10.1007/s13369-024-09198-w

By:

Alikhani, Ali;
Maerefat, Mehdi;
Sobhani, Seyed Mohammad Jafar

Publication type:

Article

Thermomechanical Response of Smart Magneto-Electro-Elastic FGM Nanosensor Beams with Intended Porosity.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2755, doi. 10.1007/s13369-024-09197-x

By:

Pehlivan, Fatih;
Esen, Ismail;
Aktas, Kerim Gokhan

Publication type:

Article

Analysis of a Solar‐Assisted Crude Oil Refinery System with Onsite Green Hydrogen Generation: A Case Study.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2557, doi. 10.1007/s13369-024-09191-3

By:

AlZahrani, Abdullah A.;
Zamfirescu, Calin;
El-Emam, Rami S.

Publication type:

Article

Parametric Study for Damage Optimization in Two-Stage Cold Extrusion Dies by Implementing Taguchi Method and ANN Method in Genetic Algorithm.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2663, doi. 10.1007/s13369-024-09189-x

By:

Shamshiri, A. R.;
Poursina, M.;
Aboutalebi, F. Haji

Publication type:

Article

Production, Testing, Modeling, Characterization, and Application of Composite Material from Melting Unsorted Plastic Waste.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2613, doi. 10.1007/s13369-024-09186-0

By:

Kadir, Andi Muhdiar;
Zenal, Harris;
Hatta, Ilham;
Krisbudiman, Arif;
Sarifudin, Yuris;
Waluyo, Sugeng

Publication type:

Article

Nonlinear Dynamics Analysis of a Deformable Robot Executing Driving Reconstruction.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2573, doi. 10.1007/s13369-024-09174-4

By:

Liu, Jun;
Zhang, Cheng;
Weng, Huajian;
Yan, Zhenkun

Publication type:

Article

Influence of the Heated-Bed Material on PLA Mechanical Properties and Energy Consumption in the FDM Process.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2443, doi. 10.1007/s13369-024-09170-8

By:

Cozzolino, Ersilia;
Napolitano, Francesco;
Papa, Ilaria;
Squillace, Antonino;
Astarita, Antonello

Publication type:

Article

Effects of Electroosmosis Flow of Bingham Plastic Fluid Induced by a Curved Microtube.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2485, doi. 10.1007/s13369-024-09168-2

By:

Adurthy, Srivally;
Reza, Motahar;
Chamkha, Ali J.

Publication type:

Article

Dynamic Deformation Behavior of the Electron Beam Melted Ti-6Al-4V Alloy.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2541, doi. 10.1007/s13369-024-09166-4

By:

Hafizoglu, Hakan;
Memu, Firat;
Hamat, Burcu Arslan;
Konokman, Huseyin Emrah;
Durlu, Nuri

Publication type:

Article

Nanomechanical and Structural Characteristics of Nanodiamond Composite Films Dependent on Target-Substrate Distance.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2651, doi. 10.1007/s13369-024-09161-9

By:

Egiza, Mohamed;
Diab, Mohamed Ragab;
Murasawa, Koki;
Naragino, Hiroshi;
Yoshitake, Tsuyoshi

Publication type:

Article

Experimental Study on the Effect of High-Pressure Inflow on the Performance of Wankel Pump: Exploration of the Gravity-Pump Pressure Collaborative Dynamic Loading Method.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2409, doi. 10.1007/s13369-024-09160-w

By:

Yu, Hao;
Zhang, Xiao;
Liu, Yanshun;
Li, Zihan;
Liu, Ruijie;
Li, Mengtian

Publication type:

Article

Investigation of the Effect of Laser Cutting Parameters on Surface and Kerf Quality of Thick Ti–6Al–4V Alloy Sheets.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2425, doi. 10.1007/s13369-024-09083-6

By:

Alsaadawy, Muhammad;
Dewidar, Montasser;
Said, A.;
Maher, Ibrahem;
Shehabeldeen, Taher A.

Publication type:

Article

Thermo-hydraulic Investigation of a Heat Exchanger Tube Equipped with 3D-Printed Swirl Flow Generators.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2383, doi. 10.1007/s13369-024-09080-9

By:

Aksoz, Zafer Yavuz;
Bogrekci, Ismail;
Demircioglu, Pinar;
Tunc, Kerim Mehmet Murat

Publication type:

Article

A Comprehensive Parametric CFD Investigation on Packed Bed Thermal Energy Storage System with Encapsulated Solid–Solid Phase Change Materials in Discharging Mode.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2351, doi. 10.1007/s13369-024-09077-4

By:

Karimi, Siros;
Mehrpooya, Mehdi;
Pourfayaz, Fathollah;
Ghafoorian, Farzad

Publication type:

Article

Implementation and Validation of an Original OpenFOAM Code for Fluid–Structure Interaction Problems in Compressible Flow.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2335, doi. 10.1007/s13369-024-09076-5

By:

Benhamou, Abdessoufi;
Belghoula, Samir Miloud

Publication type:

Article

Influence of In-house Synthesized Micro-Aegle Marmelos Polymer Concentration on Physico-Mechanical Properties of Aluminum-Based Composites.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2301, doi. 10.1007/s13369-024-09072-9

By:

Veeranaath, V.;
Sahu, Ranjeet Kumar;
Priya, Infanta Mary

Publication type:

Article

Pressure Drop and Cavitation Optimization of a Relief Valve Featuring Quick Coupling Used in Radar Systems.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2321, doi. 10.1007/s13369-024-09071-w

By:

Mutlu, Yaşar;
Dönmez, Aydın Hacı;
Karadağ, Muhammet Ali;
Göklüberk, Pınar

Publication type:

Article

Synthesis and Characterization of WNiFeCo, WNiFeMo, and WNiFeCoMo Compositional Complex Alloys Manufactured by Powder Metallurgy Technique.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2367, doi. 10.1007/s13369-024-09069-4

By:

Abolkassem, Shimaa A.;
El-Hadad, Shimaa;
Mohamed, Lamiaa Z.

Publication type:

Article

A Novel Simulation Model for Multiple Solid Particle Erosion in Micro-blasting Process of Ti-6Al-4V Dental Implant Alloy Considering Actual Geometry of Impacting Particles.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2277, doi. 10.1007/s13369-024-09058-7

By:

Khoddami, AmirSajjad;
Mohammadi, Bijan

Publication type:

Article

Monitoring of Weld Bead Profile in Friction Stir Lap Welding for Polycarbonate Sheets Using Wavelet Packets of Power Signal.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2217, doi. 10.1007/s13369-024-09057-8

By:

Goswami, Nisith K.;
Pal, Kamal;
Bisoyi, Raj K.;
Nayak, Soumya S.

Publication type:

Article

Experimental Investigation of a New Wake Monitoring Method Based on Underwater Thermal Tactile.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2251, doi. 10.1007/s13369-024-09056-9

By:

Liu, Changxin;
Chen, Runhe;
Xing, Guangyi;
Che, Haoxuan;
Huang, Peihan;
Zhang, Dazhi

Publication type:

Article

Thermal Performance of Aluminum Oxide Nanoparticles-Enhanced Latent Thermal Storage Heat Exchanger of Spiral-Wired Tube.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 4, p. 2265, doi. 10.1007/s13369-024-09054-x

By:

Hasan, Hiba A.

Publication type:

Article