Works matching IS 2193567X AND DT 2025 AND VI 50 AND IP 12

Results: 50

A Review on Flow Regimes and Aeroacoustic Coupling in Subsonic Flow Around Flat Plates.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 8753, doi. 10.1007/s13369-024-09937-z

By:

El Khatib, Atef;
Al Miaari, Ahmad;
Assoum, Hassan;
Salem, Ahmad;
Hammoud, Ali

Publication type:

Article

Multi-scale Simulation of Dendritic Growth in Laser-Melted Alumina.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9649, doi. 10.1007/s13369-024-09851-4

By:

Abubakar, Abba A.

Publication type:

Article

Performance Evaluation of Solar Flat Plate Collector with and Without Pebble as Absorber: Case Study for Semiarid Climate Conditions.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9631, doi. 10.1007/s13369-024-09824-7

By:

Irshad, Kashif;
Uzair, Mohammad;
Rehman, Shafiqur;
Algarni, Salem;
Alqahtani, Talal;
Al-Masaabi, Talal A.

Publication type:

Article

CFD Modeling of Two-Phase Flow (Oil/Air) with and without Rotary Mixer Inside a Vertical Pipe for Upstream of Multiphase Pump.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9611, doi. 10.1007/s13369-024-09789-7

By:

Bargal, Mohamed H. S.;
Ben-Mansour, Rached;
Al-Sarkhi, Abdelsalam;
Alhems, Luai M.

Publication type:

Article

Preparation of Nanoparticle-Enriched Fuels and Prediction of Cylinder Pressure Through Machine Learning Models.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9553, doi. 10.1007/s13369-024-09653-8

By:

Karaoglan, Kürşat Mustafa;
Çelik, Mehmet

Publication type:

Article

Multi-objective Process Optimization of Micro-drilling Parameters on Carbon and Carbon–Aramid (Hybrid) Fabric Composites.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9535, doi. 10.1007/s13369-024-09616-z

By:

Sen, Murat;
Eryilmaz, Oguz;
Bakir, Barkin

Publication type:

Article

Free Vibration and Buckling Analyses of Balsa Core Sandwich Composite Plates With Fiber Metal Laminate Facesheets Using the Generalized Differential Quadrature Method.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9583, doi. 10.1007/s13369-024-09517-1

By:

Maraş, Sinan

Publication type:

Article

Vibration, Bending, and Buckling of a Seven-Layer Sandwich Beam with Balsa Core Reinforced by Nanocomposite and Shape Memory Alloy Face Sheets Using Piezoelectromagnetic Layers.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9519, doi. 10.1007/s13369-024-09491-8

By:

Arabzadeh-Ziari, E.;
Mohammadimehr, M.;
Arabzadeh-Ziari, M.;
Asgari, M.

Publication type:

Article

Research on Parameter Optimization Matching of Slewing Energy Saving of Hydraulic Hybrid Excavator.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9449, doi. 10.1007/s13369-024-09463-y

By:

Yi, Lixin;
Zhu, Jianxin;
Shen, Chao;
Li, Saibai

Publication type:

Article

Guide Swirl and Tumble Systems Effect on the Aerodynamic Flow of the Cylinder in an SI Engine Using a Hydrogen-Enriched Blend.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9405, doi. 10.1007/s13369-024-09461-0

By:

Gargouri, Amal;
Jemni, Mohamed Ali;
Kchaou, Hedi

Publication type:

Article

Machine Learning-Based Optimization of Diamond Burnishing Parameters in Terms of Energy Efficiency and Quality Indexes.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9339, doi. 10.1007/s13369-024-09449-w

By:

Van, An-Le;
Nguyen, Trung-Thanh

Publication type:

Article

Thermo-Fluid Characteristics of a Flat-Plate Collector with Different Riser Tube Configurations Employing ZnO/Water Nanofluids: An Experimental and Numerical Analysis.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9389, doi. 10.1007/s13369-024-09436-1

By:

Nayak, Sukanta;
Hassan, M. A.;
Paswan, Manikant

Publication type:

Article

Role of a Hinged Single Separator in Heat Transfer Enhancement and Drag Reduction in Circular Cylinder Flow.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9365, doi. 10.1007/s13369-024-09435-2

By:

Adibi, Tohid;
Razavi, Seyed Esmail;
Ahmed, Shams Forruque;
Saha, Suvash C.;
Shah, Nehad Ali

Publication type:

Article

Design Optimization of Smart Laminated Composite for Energy Harvesting Through Machine Learning and Metaheuristic Algorithm.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9325, doi. 10.1007/s13369-024-09434-3

By:

Jegadeesan, K.;
Shankar, K.;
Datta, Shubhabrata

Publication type:

Article

Numerical and Experimental Research on Energy Absorption Characteristics and Damage Modes of Biomimetic Anti-collision Structures for Micro Aerial Vehicles.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9307, doi. 10.1007/s13369-024-09431-6

By:

Jianxun, Du

Publication type:

Article

The Hydrothermal Performance Investigation of Gasketed Plate Heat Exchangers Using Taguchi, ANOVA, and GRA Methods.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9431, doi. 10.1007/s13369-024-09430-7

By:

Bayram, Halil;
Yağmur, Haydar

Publication type:

Article

Mechanical, Microstructural, and Wear Behaviour of AA7075/SiC/Red Mud/MoS2 Hybrid Composites Through Stir Casting Route.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9465, doi. 10.1007/s13369-024-09427-2

By:

Gurmaita, Priyeshiv Kumar;
Pongen, Rosang;
Gurmaita, Shival Kumar

Publication type:

Article

A New Analytical Iterative Method for Analyzing the Effects of Low-Velocity Impacts on Composite Sandwich Plates with Flexible Cores.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9275, doi. 10.1007/s13369-024-09417-4

By:

Azarnia, Amir Hossein;
Malekzadeh Fard, Keramat;
Pourmoayed, Alireza

Publication type:

Article

Application of an Inline Mixer to Produce Surfactant-Free Biodiesel-diesel/Water Emulsion Fuel: An Analysis of Water Droplets Characteristics and Drive Cycle Emissions.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9261, doi. 10.1007/s13369-024-09408-5

By:

Tamam, Mohamad Qayyum Mohd;
Yahya, Wira Jazair;
Abdul Rahman, Hasbullah;
Ithnin, Ahmad Muhsin;
Abd Kadir, Hasannuddin;
Rahman, Md Mujibur;
Noge, Hirofumi;
Koga, Tsuyoshi;
Sugeng, Dhani Avianto

Publication type:

Article

Multi-disciplinary Analysis of Solar-Powered Unmanned Aerial Vehicles for Extended Endurance.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9505, doi. 10.1007/s13369-024-09400-z

By:

Golmakani, Atousa;
Saboohi, Zoheir;
Karimi, Nima

Publication type:

Article

Characterization of the Aluminium-Based Metal Foam Properties for Automotive Applications.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9247, doi. 10.1007/s13369-024-09399-3

By:

Salins, Sampath Suranjan;
Kumar, Shiva;
Shetty, Sawan;
Sachidananda, H. K.;
Khan, Mohammad Shayan Asjad

Publication type:

Article

Influencing Laws of Obliquities/Incident Angles on Ricochet and Trans-ricochet of Projectile-Target Impact for Armor Steel Plate Structural Design.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9231, doi. 10.1007/s13369-024-09397-5

By:

Siddique, Farah;
Li, Fuguo;
Hussain, Mirza Zahid;
Zhao, Qian;
Yin, Jingchuan;
Fan, Jianwen;
Li, Qinghua

Publication type:

Article

Thermomechanical Modeling and Numerical Simulation of Orthogonal Turning of 42CrMo4 Steel: Case of Workpiece/Tool Studies.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9487, doi. 10.1007/s13369-024-09394-8

By:

Hadj Brahim, Boujemaa;
Dahmani, Lotfi;
Nasser, Mohamed;
Attyaoui, Slimen;
Vorob'ev, Aleksandr A.

Publication type:

Article

Investigation of Drilling Performances, Tribological and Mechanical Behaviors of GFRC Filled with B4C and Gr.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9167, doi. 10.1007/s13369-024-09392-w

By:

Gürbüz, Hüseyin;
Akcan, İbrahim Halil;
Baday, Şehmus;
Demir, Mehmet Emin

Publication type:

Article

Comments on: "Free Vibration Analysis of a Rotating Mori-Tanaka-Based Functionally Graded Beam via Differential Transformation Method" [Arabian Journal for Science and Engineering 41 (2016): 577-590].

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9667, doi. 10.1007/s13369-024-09384-w

By:

Rahmanian, Mohammad;
Montaseri, Mohammad Amin

Publication type:

Article

Effect of Pulse Duration on Surface Characters and Wear Behavior of Laser-Hardened AISI O1 Tool Steel.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9199, doi. 10.1007/s13369-024-09378-8

By:

Fayazi Khanigi, Alireza;
Kooshamanesh, Sina;
Farnia, Amirreza;
Najafi, Hamidreza

Publication type:

Article

Numerical Simulation of a Parabolic Through Solar Collector with a Novel Geometric Design Equipped with an Elliptical Absorber Tube Under the Influence of Magnetic Field.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 8865, doi. 10.1007/s13369-024-09374-y

By:

Golzar, Ali;
Aghaei, Alireza;
Mohsenimonfared, Hamid;
Joshaghani, Ali Hassani

Publication type:

Article

Evolution of Morphology, Particle Size and Oxidation Resistance of Recycled Ti-6Al-4V Powders Prepared by Planetary Ball Milling.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9123, doi. 10.1007/s13369-024-09356-0

By:

Varol, Temel;
Ömür, Fethi Doğukan;
Akçay, Serhatcan Berk;
Güler, Onur;
Erdemir, Fatih

Publication type:

Article

Experimental Study on the Stability of Mixed-Flow Pump During Segmented Start-Up Process.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 8961, doi. 10.1007/s13369-024-09350-6

By:

Xuan, Yifan;
Zhu, Guojun;
Luo, Xingqi;
Wang, Yang;
Wang, Like

Publication type:

Article

Measurements of Flow Characterization Revealing Transition to Turbulence Associated with the Partial Flexibility-Based Flow Control at Low Reynolds Number.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9061, doi. 10.1007/s13369-024-09349-z

By:

Koca, Kemal;
Keskin, Sinem;
Şahin, Rumeysa;
Veerasamy, Dhamotharan;
Genç, Mustafa Serdar

Publication type:

Article

Design and Simulation of Thermoelectric Generator to Recover Waste Heat of Chimney.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9111, doi. 10.1007/s13369-024-09340-8

By:

Bashir, Mohamed Bashir Ali;
Alkuraiee, Tareg Zeyad Ahmed;
Rajpar, Altaf Hussain;
Bashir, M. Nasir

Publication type:

Article

Deformation of an Open Sandwich Cylindrical Shell with CNT Reinforced Faces Using HDQ Method.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 8903, doi. 10.1007/s13369-024-09339-1

By:

Shokrollahi, Hassan;
Emdadi Derabi, Mohammad

Publication type:

Article

A New Ant-Inspired 2-DOF Compliant Mechanism with High Frequency and Large Workspace for Potential Application in Material Testing.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 8941, doi. 10.1007/s13369-024-09338-2

By:

Nguyen, Hung Dinh;
Van Le, Hung;
Tran, Ngoc Thoai;
Dang, Minh Phung;
Van Tran, Hong;
Le, Hieu Giang;
Dao, Thanh-Phong

Publication type:

Article

Mapping of Strategic Operating Conditions for End Milling Super-Transus Heat-Treated Ti1023 Alloy Using Multi-Objective Optimization.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 8995, doi. 10.1007/s13369-024-09337-3

By:

Nair, Viswajith S.;
Rameshkumar, K.;
Satyanarayana, V.;
Saravanamurugan, S.

Publication type:

Article

Application of Finite Element Simulation in Predicting Slab Cambers During the Width Sizing Process.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9185, doi. 10.1007/s13369-024-09336-4

By:

Zong, Chungen;
Bao, Jiahan;
Zhou, Weiwen

Publication type:

Article

Thermal Analysis of Conjugate Convective Flow in a Vented Chamber Featuring Different Heat-Generating Solid Objects.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9095, doi. 10.1007/s13369-024-09335-5

By:

Zaman, Md. Tausifuz;
Ahmed, Fahim;
Shuvo, Md. Shahneoug;
Deb, Niloy;
Saha, Sumon

Publication type:

Article

Multi-objective Optimization of Process Parameters for Surface Quality and Geometric Tolerances of AlSi10Mg Samples Produced by Additive Manufacturing Method Using Taguchi-Based Gray Relational Analysis.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9211, doi. 10.1007/s13369-024-09333-7

By:

Işik, Uğur;
Demir, Halil;
Özlü, Barış

Publication type:

Article

Experimental Investigation and Optimization of Process Parameters of Self-Shielded Wire Powder Arc Additive Manufacturing on Low-Carbon Steel Through RSM.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 8919, doi. 10.1007/s13369-024-09332-8

By:

Singhal, Tejendra Singh;
Jain, Jinesh Kumar;
Kumar, Manoj

Publication type:

Article

Reducing the Heterogeneity in Tensile Strength in the Coir (Cocos nucifera)-Epoxy Composite Through Enhancing Surface Quality and Maintaining Longitudinal Integrity.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 8975, doi. 10.1007/s13369-024-09331-9

By:

Mishra, Shashank;
Parashar, Vishal

Publication type:

Article

Genetic Modeling for Enhancing Machining Performance of High-Volume Fraction 45% SiCp/Al Particle Reinforcement Metal Matrix Composite.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9043, doi. 10.1007/s13369-024-09330-w

By:

Laghari, Rashid Ali;
Pourmostaghimi, Vahid;
Laghari, Asif Ali;
Qazani, Mohammad Reza Chalak;
Sarhan, Ahmed A. D.

Publication type:

Article

A Feasibility Study of Maximizing Radial Flow Compressor Performance by Hierarchy Optimization Using Individually Optimized Components.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9079, doi. 10.1007/s13369-024-09328-4

By:

Rajabpour, Shahram;
Hajilouy-Benisi, Ali;
Manzari, Mehrdad T.

Publication type:

Article

Experimental Analysis of Hydrogen Addition at Varying Injection Opening Pressures on a Dual-Fuel Diesel Engine Operating with Diesel and Cottonseed Oil.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9291, doi. 10.1007/s13369-024-09326-6

By:

Yousufuddin, Syed;
Mahrous, Elaf N.;
Saleem, Muhammad

Publication type:

Article

Casson Magnetoconvective Nanofluid Flow Caused by An Upright Dish with Radiative Heat.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9141, doi. 10.1007/s13369-024-09324-8

By:

Rahman, Mizanur;
Ali, Md. Yousuf;
Nasrin, R.

Publication type:

Article

Exergetic and Thermal Performance Analysis of Liquid and Gaseous Fuel–Air Mixture in PDC Using Computational Fluid Dynamics.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 8887, doi. 10.1007/s13369-024-09319-5

By:

Debnath, Pinku;
Pandey, K. M.

Publication type:

Article

Extended Sliding Mode Observer-Based Output Constraint Nonlinear Control Scheme for Electro-hydraulic Actuators with System Uncertainties.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 9025, doi. 10.1007/s13369-024-09285-y

By:

Zang, Wanshun;
Shen, Gang;
Zang, Kejiang;
Chen, Xiao

Publication type:

Article

Microstructure and Wear Behaviour of Ultrasonically Processed Al–MgAl2O4 In-Situ Composite.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 8831, doi. 10.1007/s13369-024-09277-y

By:

Thakur, Ashish;
Gupta, Ramendra Kumar;
Sapate, S. G.;
Peshwe, D. R.;
Mahajan, Y. Y.

Publication type:

Article

Unsteady Analysis of Secondary Vortex Formations Within An Axial Compressor Stage with Tandem Rotor.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 8847, doi. 10.1007/s13369-024-09276-z

By:

Babu, Sushanlal;
Pradeep, A. M.

Publication type:

Article

Study on Flow Field Characteristics of Micro-Flow Control Valve Based on Fluid-Thermal-Solid Coupling.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 8813, doi. 10.1007/s13369-024-09264-3

By:

Li, Jianying;
Peng, Chen;
Guo, Qi;
Wang, Zhao

Publication type:

Article

Analytical Solutions for Stress and Displacement of a Circular Tunnel Considering Thermal Stress and Lateral Pressure Coefficient Under Unsteady Temperature Field.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 8795, doi. 10.1007/s13369-024-09261-6

By:

Li, Yi;
Chen, Youliang;
Du, Xi;
Wu, Dongpeng;
Azzam, Rafig;
Fernandez-Steeger, Tomas Manuel

Publication type:

Article

Cavitation Identification Method of Centrifugal Pumps Based on Signal Demodulation and EfficientNet.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 12, p. 8779, doi. 10.1007/s13369-024-09193-1

By:

Song, Yongxing;
Zhang, Tonghe;
Liu, Qiang;
Ge, Bingxin;
Liu, Jingting;
Zhang, Linhua

Publication type:

Article