Works matching IS 2193-567X AND VI 49 AND IP 2 AND DT 2024

Results: 75

CFD Modelling of CO2 Absorption in an Aqueous Medium in a Spray Column Scrubber with an Innovative Helical Sparger.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2645, doi. 10.1007/s13369-023-08371-x

By:

Singh, Mandeep;
Khatri, Kamal Kishore;
Dargar, Ashok Kumar

Publication type:

Article

Improved Streamline Curvature Method for Prediction of Gas Turbines Performance.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2749, doi. 10.1007/s13369-023-08369-5

By:

Bashi, Hosein;
Esfahanian, Vahid;
Tavakoli, Alireza;
Ansari, Mehran;
Izadi, Mohammad Javad;
Kordi, Mohammad

Publication type:

Article

Energy and Exergy Analyses of a Sustainable Calcination Process in a Vertical Limekiln Performing with Producer Gas as Renewable Biofuel Derived from Eucalyptus Wood Biomass Gasification.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2695, doi. 10.1007/s13369-023-08363-x

By:

Camargos, Tomás P. L.;
Costa, Andréa O. S.;
Junior, Esly F. Costa

Publication type:

Article

Thermodynamic Investigation of a Photovoltaic/Thermal Heat Pipe Energy System Integrated with Phase Change Material.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2625, doi. 10.1007/s13369-023-08362-y

By:

Alsagri, Ali Sulaiman

Publication type:

Article

Proof of Concept of the Regeneration Part in a Novel Desiccant-Based Atmospheric Water Generator.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2813, doi. 10.1007/s13369-023-08512-2

By:

Ahmed, M. A. M.;
Shamet, O.;
Lawal, D. U.;
Antar, M. A.;
Zubair, S. M.

Publication type:

Article

Investigation and Optimization of Cutting Performance of High Chrome White Cast Iron by Wire Erosion.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 1585, doi. 10.1007/s13369-023-07930-6

By:

Urtekin, Levent;
Şahin, İbrahim Baki;
Yılan, Faik;
Kuloğlu, Erkan;
Genç, Asım

Publication type:

Article

Thermo-economic Analysis of Solar-Assisted Absorption Systems in Sun-Belt Cities: Saudi Arabia Case Studies.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2767, doi. 10.1007/s13369-023-08452-x

By:

Hasan, Abdulsalam M. A.;
Mokheimer, Esmail M. A.

Publication type:

Article

MED-TVC Parallel Feed Water with Energy Recovery from Brine Preheating.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2729, doi. 10.1007/s13369-023-08443-y

By:

Qudah, Azeez;
Hasan, Abdulsalam;
Antar, M. A.

Publication type:

Article

Predictive Modeling and Optimization of Engine Characteristics with Biogas–Biodiesel-Powered Dual-Fuel Mode: A Neural Network-Coupled Box–Behnken Design.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2661, doi. 10.1007/s13369-023-08375-7

By:

Ahmad, Aqueel;
Singh, Achhaibar

Publication type:

Article

Numerical Study of Erosion Phenomena with the Presence of Cavitation at Deflector Jet Servo-Valve.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2797, doi. 10.1007/s13369-023-08427-y

By:

Abdallah, Hazem K.;
Ben-Mansour, Rached;
Li, Songjing

Publication type:

Article

Pre-rolling Friction Moment Measurements of Corundum and Silica Balls on K8 Glass Surface.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2599, doi. 10.1007/s13369-023-08338-y

By:

Gilavdary, I.;
Mekid, S.;
Riznookaya, N.

Publication type:

Article

Optimizing Endurance and Power Consumption of Fixed-Wing Unmanned Aerial Vehicles Powered by Proton-Exchange Membrane Fuel Cells.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2605, doi. 10.1007/s13369-023-08335-1

By:

Abdulrahman, Gubran A. Q.;
Qasem, Naef A. A.

Publication type:

Article

Review on Small Horizontal-Axis Wind Turbines.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 1367, doi. 10.1007/s13369-023-08314-6

By:

Ismail, Kamal A. R.;
Lino, Fatima A. M.;
de Almeida, Odenir;
Teggar, Mohamed;
Scalon, Vicente Luiz;
Okita, Willian M.

Publication type:

Article

Free Vibration Frequencies of a Variable Cross-Section Timoshenko-Ehrenfest Beam using Fourier-p Element.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2831, doi. 10.1007/s13369-023-08289-4

By:

Bazoune, Abdelaziz

Publication type:

Article

Improving Rheology, Slurryability and Stability of Iron Ore Suspension Employing Variances in Size Distribution.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2531, doi. 10.1007/s13369-023-08286-7

By:

Gupta, Chandan;
Kumar, Satish

Publication type:

Article

Experimental Investigation of Parabolic Dish Solar Collector using Nanofluids for Steam Cooking.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2581, doi. 10.1007/s13369-023-08278-7

By:

Bekele, Addisu;
Dereje, Shifera;
Pandey, Vivek;
Badruddin, Irfan Anjum

Publication type:

Article

Investigation of Quasi-static Punch Shear Behaviors of Aramid/Epoxy Laminated Composites Modified with GNP-MWCNT Nanoparticles.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2499, doi. 10.1007/s13369-023-08277-8

By:

Bati, Serkan;
Çelik, Yahya Hışman

Publication type:

Article

Numerical Simulation of Electroosmotic Sutterby Hybrid Nanofluid Flowing Through an Irregularly Mild Stenotic Artery with an Aneurysm.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2483, doi. 10.1007/s13369-023-08257-y

By:

Kot, M. A. El;
Elmaboud, Y. Abd

Publication type:

Article

Numerical Investigation of Rotating Cylinders Proximity to Walls: Augmenting Thermal Performance of System in Steady and Periodic Flows.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2389, doi. 10.1007/s13369-023-08254-1

By:

Barati, Ebrahim;
Attarbashi, Amir

Publication type:

Article

Feasibility of Complete Substitution of Petroleum Diesel with Biofuels in Diesel Engines: An Experimental Assessment of Combustion, Performance, and Emissions Characteristics.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2367, doi. 10.1007/s13369-023-08252-3

By:

Çakmak, Abdülvahap

Publication type:

Article

Physico-mechanical and Tribological Characteristics of Flax–Ramie Fiber Reinforced Green Composites and Anticipation of Fabricated Composites Under Different Loading with Sliding Constraint.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2463, doi. 10.1007/s13369-023-08247-0

By:

Kumar, Santosh;
Mahakur, Vijay Kumar;
Bhowmik, Sumit

Publication type:

Article

Mechanical, Tribological and Corrosion Performances of Autocatalytic Duplex Ni–P/Ni–Mo–P Coating.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2443, doi. 10.1007/s13369-023-08246-1

By:

Biswas, Palash;
Das, Suman Kalyan;
Sahoo, Prasanta

Publication type:

Article

Tribological Analysis and Optimization of Ring-Cylinder Couple Coated with Different Materials.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2553, doi. 10.1007/s13369-023-08241-6

By:

Cesur, Idris;
Akgündüz, Mehmet;
Çelik, Hasan Ali;
Çay, Yusuf;
Ergen, Gökhan

Publication type:

Article

Implementing Deep Learning-Based Intelligent Inspection for Investment Castings.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2519, doi. 10.1007/s13369-023-08240-7

By:

Yousef, Nabhan;
Sata, Amit

Publication type:

Article

Performance Evaluation of TWIST Welding Using Machine Learning Assisted Evolutionary Algorithms.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2411, doi. 10.1007/s13369-023-08238-1

By:

Kumar, Dhiraj;
Ganguly, Samriddhi;
Acherjee, Bappa;
Kuar, Arunanshu Shekhar

Publication type:

Article

Potential of Polyurethane Functionalized Electrospun Nanofiber Membrane as Self-cleaning Water Filter.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2357, doi. 10.1007/s13369-023-08230-9

By:

Avvari, Venkata Dinesh;
Boggarapu, Vasavi;
Kimmer, D.;
Sreekanth, P. S. Rama

Publication type:

Article

Application of the Time–Temperature Superposition Principle to Predict Long-Term Behaviour of an Adhesive for Use in Shipbuilding.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2345, doi. 10.1007/s13369-023-08219-4

By:

Souto-Silvar, Daniel A.;
Álvarez-García, A.;
Díaz-Díaz, A.;
Rodríguez-Dopico, Francisco J.;
López-Beceiro, Jorge

Publication type:

Article

Reciprocating Dry Sliding Wear Behaviour of AZ91/Al2O3 Magnesium Nanocomposites.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2299, doi. 10.1007/s13369-023-08216-7

By:

Niranjan, C. A.;
Shobha, R.;
Prabhuswamy, N. R.;
Yogesh, H. M.;
Jain, Vikram Kumar S.

Publication type:

Article

Simultaneous Optimization of Surface Roughness and Mechanical Properties of 316L Produced by LB–PBF Using Grey Relational Analysis Complemented by Residual Stress Analysis.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2285, doi. 10.1007/s13369-023-08215-8

By:

La Fé-Perdomo, Iván;
Ramos-Grez, Jorge A.;
Jeria, Ignacio;
Guerra, Carolina;
Zambrano-Robledo, Patricia

Publication type:

Article

Probabilistic and Fuzzy Nonlinear Discontinuous Aeroelastic Analysis of In-plane FG Panels in Supersonic Flow with Mechanical and Thermal In-plane Loadings.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2327, doi. 10.1007/s13369-023-08209-6

By:

Hussein, Omar S.

Publication type:

Article

Investigation on Mechanical and Sliding Wear Behavior of Pongamia-Oil-Cake/Basalt Fiber-Reinforced Epoxy Hybrid Composites.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2311, doi. 10.1007/s13369-023-08207-8

By:

Tavadi, Ashokkumar R.;
Nagabhushana, N.;
Vivek Bhandarkar, V. N.;
Jagadeesha, T.;
Kerur, Mohammad Rafi;
Rudresha, S.;
Durga Prasad, C.;
Rajesh Kannan, A.;
Mohan, Dhanesh G.

Publication type:

Article

A Techno-Economic Review of Dust Accumulation and Cleaning Techniques for Solar Energy Harvesting Devices.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 1343, doi. 10.1007/s13369-023-08206-9

By:

Ahmadullah, Ahmad Bilal;
Al-Sharafi, Abdullah;
Hassan, Ghassan;
Al-Qahtani, Hussain;
Abubakar, Abba Abdulhamid;
Yilbas, Bekir Sami

Publication type:

Article

Hot Tensile Rate-Dependent Deformation Behaviour of AZ31B Alloy Using Different Johnson–Cook Constitutive Models.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2217, doi. 10.1007/s13369-023-08194-w

By:

Jaimin, Aarjoo;
Kotkunde, Nitin;
Singh, Swadesh Kumar

Publication type:

Article

Evaluation of Tribological Properties of UHMW-PE Composite Coatings Reinforced with Crumb Rubber Particles.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2143, doi. 10.1007/s13369-023-08192-y

By:

Mohammed, Abdul Samad

Publication type:

Article

Improving Thermal Management of CPU by Surface Roughening of Heat Sinks.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2153, doi. 10.1007/s13369-023-08182-0

By:

Attar, Mohammad Reza;
Kazemi, Mohsen;
Salami, Bagher;
Noori, Hamid;
Passandideh-Fard, Mohammad;
Hosseinpour, Saman;
Davoodi, Ali;
Mohammadi, Majid

Publication type:

Article

Numerical Investigation of the Enhancement of the Aerodynamic Performance for Newly Modified Blended Airfoils Utilizing S809, S829, and NACA 2412 Baseline Shapes.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2233, doi. 10.1007/s13369-023-08180-2

By:

Uddin, S. M. Nasim;
Haque, Mohammad Rejaul;
Haque, M. Merajul;
Alam, Md. Fazlay;
Hamja, Abu

Publication type:

Article

Effect of PCL/HA Nanocomposite Coating on the Degradation Rate and Mechanical Integrity of Mg/HA Biocomposites During Exposure in SBF.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2077, doi. 10.1007/s13369-023-08134-8

By:

Bagheri, A.;
Sedighi, M.;
Shamsi, M.

Publication type:

Article

Proposition of a Propeller Shape: A Numerical Study of Its Performance.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2119, doi. 10.1007/s13369-023-08122-y

By:

Choayb, Hammana

Publication type:

Article

Mechanical and Surface Wettability Analysis of Rare Earth Modified Composite Coating Developed Using Metal Spraying.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2065, doi. 10.1007/s13369-023-08115-x

By:

Vishnoi, Mohit;
Murtaza, Qasim;
Kumar, Paras

Publication type:

Article

A Comparison Study of Caputo and Atangana–Baleanu Fractional Approaches for Radiation and Magnetic Field Impact on CNT-H2O Casson Nanofluid Across a Vertical Plate.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2095, doi. 10.1007/s13369-023-08112-0

By:

Mahitha, Orugonda;
Golla, Vijaya Kumar Avula

Publication type:

Article

On Fabrication of Inconel 718 Slab by Wire Arc Additive Manufacturing: Study of Built Microstructure and Mechanical Properties.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2045, doi. 10.1007/s13369-023-08095-y

By:

Haldar, Nimai;
Anand, Sameer;
Datta, Saurav;
Das, Atanu

Publication type:

Article

The Effect, Prediction, and Optimization of Fe Particles on Wear Behavior of Fe–ABS Composites Fabricated by Fused Deposition Modeling.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2001, doi. 10.1007/s13369-023-08077-0

By:

Bahrami, Mohammad Hossein;
Ehteshamfar, Mohammad Vahid;
Adibi, Hamed

Publication type:

Article

Influence of Friction Stir Processing on Novel Designed Aluminium-Based Alloy to Enhance Strength and Ductility.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 1969, doi. 10.1007/s13369-023-08063-6

By:

Jain, Sandeep;
Patel, Mahesh;
Murugesan, Jayaprakash;
Samal, Sumanta

Publication type:

Article

Estimation of Porosity Effect on Mechanical Properties in Calcium Phosphate Cement Reinforced by Strontium Nitrate Nanoparticles: Fabrication and FEM Analysis.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 1815, doi. 10.1007/s13369-023-08050-x

By:

Fada, Rezvan;
Shahgholi, Mohamad;
Azimi, Reyhaneh;
Babadi, Niusha Farhadi

Publication type:

Article

Comparative Study of Quadratic Mixed Convection MHD Carreau Fluid Flow on Cylinder and Flat Plate with Mass Transition.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 1977, doi. 10.1007/s13369-023-08040-z

By:

Jiann, Lim Yeou;
Zin, Nor Athirah Mohd;
Rawi, Noraihan Afiqah;
Ilias, Mohd Rijal;
Shafie, Sharidan

Publication type:

Article

Influence of Friction Stir Processing Parameters on Microstructure, Hardness and Corrosion Resistance of Biocompatible Mg Alloy WE43.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 1897, doi. 10.1007/s13369-023-08037-8

By:

Wu, Bo;
Yusof, Farazila;
Li, Fuguo;
Abdul Razak, Bushroa Binti;
Bin Muhamad, Mohd Ridha;
Badruddin, Irfan Anjum;
Hussien, Mohamed;
Kamangar, Sarfaraz;
Ibrahim, Mahmoud Zakaria

Publication type:

Article

Surface Treatment of AISI 304 Stainless Steel by GOV (Flow Peening) Process.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 1869, doi. 10.1007/s13369-023-08032-z

By:

Sahin, Burak;
Gov, Ibrahim;
Kalak, Murat;
Koca, Mustafa Sait;
Gov, Kursad

Publication type:

Article

Magnetohydrodynamic Micropolar Nanofluid Flow in a Shrinking Channel with Second-Order Velocity Slip and Thermal Radiation.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 1955, doi. 10.1007/s13369-023-08011-4

By:

Roy, Nepal Chandra;
Ghosh, Ayantika;
Pop, Ioan

Publication type:

Article

Development of a Multi-block Modified Independent Component Analysis based Process Monitoring Strategy.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 1843, doi. 10.1007/s13369-023-08010-5

By:

Mishra, Bhagwan Kumar;
Das, Anupam

Publication type:

Article

Performance Assessment of an Air-Conditioning System Utilizing a PCM-Based Annulus Cylindrical Latent Heat Storage.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 1759, doi. 10.1007/s13369-023-08009-y

By:

Singh, Prakash Chandra;
Halder, Pabitra

Publication type:

Article