Works matching IS 20804075 AND DT 2025 AND VI 19 AND IP 8

Results: 36

Evaluation of the possibility of obtaining spherical powders of titanium alloy Ti‑6Al‑4V by supersonic reverse polarity plasma torch for use in additive manufacturing.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 434, doi. 10.12913/22998624/205855

By:

Shiyi Gao;
Korzhyk, Volodymyr;
Strohonov, Dmytro;
Tereshchenko, Oleksii;
Demіanov, Oleksii;
Ganushchak, Oleg

Publication type:

Article

Mechanical properties analysis of burnished brass.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 423, doi. 10.12913/22998624/205836

By:

Al-mahasne, Mayas Mohammad

Publication type:

Article

Corrosion behavior of nano bio coating on AZ31 magnesium alloy by electrophoretic deposition for biomedical application.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 296, doi. 10.12913/22998624/205765

By:

Radhi, Maream Ali;
Mustafa, Ali Mundher;
Abdulkareem, Makarim H.

Publication type:

Article

Machinability of 9CrSi steel as processed by powder-added electric discharge machining: Investigation and optimization for boosted machining characteristics.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 449, doi. 10.12913/22998624/205764

By:

Manh Tung Do;
Van-Tao Le;
Truong Giang Nguyen

Publication type:

Article

Behavior analysis of polymer modified bitumen in wet process: A literature review.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 332, doi. 10.12913/22998624/205763

By:

Jaysawal, Devesh;
Bandyopadhyaya, Ranja

Publication type:

Article

Performance analysis of tantalum and copper patches in microelectro-mechanical systems based microstrip patch antennas for 5th generation mmWave applications.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 285, doi. 10.12913/22998624/205744

By:

Redzuwan, Redia Mohd;
Sampe, Jahariah;
Latif, Rhonira;
Rhazali, Zeti Akma;
Mohd Yunus, Noor Hidayah

Publication type:

Article

Optimization of fused deposition modeling parameters to enhance tensile strength and surface roughness of polyethylene terephthalate glycol.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 345, doi. 10.12913/22998624/205716

By:

Shabeeb, Alaa Hassan;
Abdulwahhab, Ahmed Basil;
Ismael, Hameed S.;
Ghazi, Safaa Kadhim

Publication type:

Article

Optimizing the impact strength and hardness of the liquid crystal display printed parts using artificial neural network.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 373, doi. 10.12913/22998624/205714

By:

Abdulrazaq, Mustafa Mohammed;
Najm, Vian N.;
Ahmed, Athraa Mohammed S.

Publication type:

Article

Modal analysis of a beam with a metamaterial segment produced using additive manufacturing technology.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 359, doi. 10.12913/22998624/205712

By:

Ciborowski, Tomasz;
Wojtczak, Erwin;
Rucka, Magdalena

Publication type:

Article

Influence of speed and heat input of the pulsed-arc welding process on the structure formation of Al-Mg-Mn aluminum alloy joints.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 313, doi. 10.12913/22998624/205691

By:

Korzhyk, Volodymyr;
Shiyi Gao;
Khaskin, Vladyslav;
Illiashenko, Yevhenii;
Grynyuk, Andrii;
Alyoshin (Junior), Andriy;
Bushma, Oleksandr;
Xinxin Wang;
Yanchao Hu;
Guirong

Publication type:

Article

Modification of the dye-sensitized solar cells photoanode by changing the immersion time and dye concentration.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 495, doi. 10.12913/22998624/205531

By:

Krawczak, Ewelina;
Zdyb, Agata

Publication type:

Article

Artificial intelligence-driven internet of things monitoring system towards industry 5.0–a case study of mold manufacturing process.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 479, doi. 10.12913/22998624/205494

By:

Patalas-Maliszewska, Justyna;
Musalekar, Dineshkumar;
Halikowski, Daniel

Publication type:

Article

Detection of capillary moisture in a ceramic brick wall using coupled chilled mirror and conductometric method.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 467, doi. 10.12913/22998624/205357

By:

Pluta, Kamil;
Olszewska-Patuszak, Dagmara;
Tabiś, Krzysztof;
Suchorab, Zbigniew

Publication type:

Article

Advances in the calculation of compressive strength from acoustic measurements of rock mass samples–examples of calculations.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 384, doi. 10.12913/22998624/205339

By:

Chrzan, Tadeusz;
Szymanowicz, Sławomir

Publication type:

Article

Comprehensive study of load distribution and ductility in reinforced composite shear walls under seismic performance.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 190, doi. 10.12913/22998624/205326

By:

Al-Khafaji, Hayder M. J.

Publication type:

Article

The influence of the load level during cyclic torsion on the fatigue life and fracture surface of tin-zinc-lead bronze RG7.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 395, doi. 10.12913/22998624/205280

By:

Małecka, Joanna;
Żak, Krzysztof;
Łagoda, Tadeusz

Publication type:

Article

Experimental study of vapor compression refrigeration system using mixing refrigerant (R290/R600a) compare with nano refrigerant (R600a/Al2O3).

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 177, doi. 10.12913/22998624/205278

By:

Youssif, Sura Saher;
Shabeeb, Omran A.;
Mahan, Hamid Mohammed;
Konovalov, Sergey V.;
Azeez Ismael, Ahmed Abdul

Publication type:

Article

Microstructural and thermal property modifications of Sn-43Bi solder alloys via selective alloying with Se, In, Zn, and Al.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 273, doi. 10.12913/22998624/205223

By:

Dawood, Feryal;
Al-Bawee, Abbas;
Alrubaiy, Ahmed A. A. G.

Publication type:

Article

IR radiation method in moisture testing of various types of grains.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 413, doi. 10.12913/22998624/205222

By:

Szafrańska, Anna;
Janas, Sławomir;
Kowalska, Małgorzata;
Turek, Paweł

Publication type:

Article

Environmental pollution with polycyclic aromatic hydrocarbons contained in sewage sludge–the mathematical model.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 260, doi. 10.12913/22998624/205207

By:

Włodarczyk-Makuła, Maria;
Włodarczyk, Maciej;
Bajdur, Wioletta

Publication type:

Article

Experimental studies on optimal actuator shape in active vibration control of triangular plates.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 205, doi. 10.12913/22998624/205033

By:

Kuras, Romuald;
Kawalec, Andrzej;
Hajder, Sebastian;
Brański, Adam

Publication type:

Article

Regenerative braking process for the urban traffic conditions in Gdańsk and Bremen.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 217, doi. 10.12913/22998624/205027

By:

Kropiwnicki, Jacek;
Gawłas, Tomasz;
Eicke, Albrecht;
Smolen, Slawomir

Publication type:

Article

Enhanced microstructure and mechanical properties of Al2O3-Ni composites via centrifugal slip casting with constant magnetic field.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 232, doi. 10.12913/22998624/204967

By:

Zygmuntowicz, Justyna;
Kosiorek, Magdalena;
Wachowski, Marcin;
Torzewski, Janusz;
Szachogluchowicz, I.;
Zielińska, Paulina;
Kaszuwara, Waldemar;
Falkowski, Paweł

Publication type:

Article

Effect of graphite morphology on water absorption and fatigue properties of biopolyamide matrix composites.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 90, doi. 10.12913/22998624/204860

By:

Bazan, Patrycja;
Majewska, Paulina;
Drenda, Cezary;
Paso, Kristofer Gunnar

Publication type:

Article

Prediction and experimental validation of cutting forces in ball end milling of aluminum 7075-T6 alloy.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 68, doi. 10.12913/22998624/204778

By:

Sifeddine, Mekentichi;
Benmohammed, Brahim;
Schlegel, Daniel;
Lee-Remond, Sora;
Benyoucef, Ahmed

Publication type:

Article

Mechanical and metallurgical properties of GTAW dissimilar welds between SUS304 and SA213T11 using ER308 filler metal, preliminary study.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 77, doi. 10.12913/22998624/204768

By:

Hamdani;
Akhyar;
Rizwan, Thaib;
Sasmito, Agus;
Suhartono, H. Agus

Publication type:

Article

Partial maxillofacial reconstruction: Design and additive manufacturing of individualized pre-and mid-surgery supplies.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 114, doi. 10.12913/22998624/204756

By:

Smolarek, Emilia;
Górski, Filip;
Żukowska, Magdalena;
Słowik, Łukasz;
Okła, Maciej

Publication type:

Article

Modeling of time and frequency dependent behavior of viscoelastic multi-layered reinforced composites with imperfect interfaces.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 44, doi. 10.12913/22998624/204737

By:

Bouchikhi, Ahmed;
Bakkali, Abderrahmane;
Abouelhanoune, Younes

Publication type:

Article

Enhancing impact resistance of concrete slabs.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 30, doi. 10.12913/22998624/204679

By:

Anbu, Hemanth Kumar;
P., Udhayanithi;
Kothandapani, Karthikeyan;
M., Senthilpandian

Publication type:

Article

Eccentricity with non-parallel axes of symmetry and rotation–movement of gear teeth along the axis of rotation.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 249, doi. 10.12913/22998624/204438

By:

Jedliński, Łukasz

Publication type:

Article

Structural analysis and environmental performance of reusable military storage tents: Wind resistance and humidity control.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 165, doi. 10.12913/22998624/204420

By:

Kosiuczenko, Krzysztof;
Nowakowski, Marek;
Ciekot, Zbigniew

Publication type:

Article

Reversible image steganography using transformer-based latent embedding.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 148, doi. 10.12913/22998624/204419

By:

Veselska, Olga;
Ziubina, Ruslana

Publication type:

Article

Influence of glued steel and composite tapes on the behaviour of axially compressed hot-rolled steel angles.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 141, doi. 10.12913/22998624/204181

By:

Szewczak, Ilona;
Snela, Małgorzata

Publication type:

Article

Characterization of hot deformability of C-Mn-Si structural steels.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 126, doi. 10.12913/22998624/204076

By:

Opiela, Marek;
Rakszawa, Mateusz;
Grzegorczyk, Barbara;
Trzaska, Jacek

Publication type:

Article

Supply chain risk management in construction.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 15, doi. 10.12913/22998624/204013

By:

Czajkowska, Agnieszka;
Ingaldi, Manuela

Publication type:

Article

Influence of process parameters in tungsten inert gas welding of titanium supported by you only look once-based defect detection algorithm.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 1, doi. 10.12913/22998624/203803

By:

Frankiewicz, Przemysław;
Góral, Tomasz;
Bembenek, Michał

Publication type:

Article

Works matching IS 20804075 AND DT 2025 AND VI 19 AND IP 8

Evaluation of the possibility of obtaining spherical powders of titanium alloy Ti‑6Al‑4V by supersonic reverse polarity plasma torch for use in additive manufacturing.

Mechanical properties analysis of burnished brass.

Corrosion behavior of nano bio coating on AZ31 magnesium alloy by electrophoretic deposition for biomedical application.

Machinability of 9CrSi steel as processed by powder-added electric discharge machining: Investigation and optimization for boosted machining characteristics.

Behavior analysis of polymer modified bitumen in wet process: A literature review.

Performance analysis of tantalum and copper patches in microelectro-mechanical systems based microstrip patch antennas for 5th generation mmWave applications.

Optimization of fused deposition modeling parameters to enhance tensile strength and surface roughness of polyethylene terephthalate glycol.

Optimizing the impact strength and hardness of the liquid crystal display printed parts using artificial neural network.

Modal analysis of a beam with a metamaterial segment produced using additive manufacturing technology.

Influence of speed and heat input of the pulsed-arc welding process on the structure formation of Al-Mg-Mn aluminum alloy joints.

Modification of the dye-sensitized solar cells photoanode by changing the immersion time and dye concentration.

Artificial intelligence-driven internet of things monitoring system towards industry 5.0–a case study of mold manufacturing process.

Detection of capillary moisture in a ceramic brick wall using coupled chilled mirror and conductometric method.

Advances in the calculation of compressive strength from acoustic measurements of rock mass samples–examples of calculations.

Comprehensive study of load distribution and ductility in reinforced composite shear walls under seismic performance.

The influence of the load level during cyclic torsion on the fatigue life and fracture surface of tin-zinc-lead bronze RG7.

Experimental study of vapor compression refrigeration system using mixing refrigerant (R290/R600a) compare with nano refrigerant (R600a/Al<sub>2</sub>O<sub>3</sub>).

Microstructural and thermal property modifications of Sn-43Bi solder alloys via selective alloying with Se, In, Zn, and Al.

IR radiation method in moisture testing of various types of grains.

Environmental pollution with polycyclic aromatic hydrocarbons contained in sewage sludge–the mathematical model.

Experimental studies on optimal actuator shape in active vibration control of triangular plates.

Regenerative braking process for the urban traffic conditions in Gdańsk and Bremen.

Enhanced microstructure and mechanical properties of Al<sub>2</sub>O<sub>3</sub>-Ni composites via centrifugal slip casting with constant magnetic field.

Effect of graphite morphology on water absorption and fatigue properties of biopolyamide matrix composites.

Prediction and experimental validation of cutting forces in ball end milling of aluminum 7075-T6 alloy.

Mechanical and metallurgical properties of GTAW dissimilar welds between SUS304 and SA213T11 using ER308 filler metal, preliminary study.

Partial maxillofacial reconstruction: Design and additive manufacturing of individualized pre-and mid-surgery supplies.

Modeling of time and frequency dependent behavior of viscoelastic multi-layered reinforced composites with imperfect interfaces.

Enhancing impact resistance of concrete slabs.

Eccentricity with non-parallel axes of symmetry and rotation–movement of gear teeth along the axis of rotation.

Structural analysis and environmental performance of reusable military storage tents: Wind resistance and humidity control.

Reversible image steganography using transformer-based latent embedding.

Influence of glued steel and composite tapes on the behaviour of axially compressed hot-rolled steel angles.

Characterization of hot deformability of C-Mn-Si structural steels.

Supply chain risk management in construction.

Influence of process parameters in tungsten inert gas welding of titanium supported by you only look once-based defect detection algorithm.