Retained Austenite Control for the Soft Machining of High-Hardness Tool Steels.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 564, doi. 10.3390/met8070564
- By:
- Publication type:
- Article
Works matching IS 20754701 AND DT 2018 AND VI 8 AND IP 7
Results: 94
1
2
Effects of Nb and W Additions on the Microstructures and Mechanical Properties of Novel γ/γ’ Co-V-Ti-Based Superalloys.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 563, doi. 10.3390/met8070563
- By:
- Publication type:
- Article
3
Energy Dissipation Characteristics and Dynamic Modeling of the Coated Damping Structure for Metal Rubber of Bellows.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 562, doi. 10.3390/met8070562
- By:
- Publication type:
- Article
4
Recovery of Gold and Iron from Cyanide Tailings with a Combined Direct Reduction Roasting and Leaching Process.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 561, doi. 10.3390/met8070561
- By:
- Publication type:
- Article
5
Production of Clean Steel Using the Nitrogen Elevating and Reducing Method.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 560, doi. 10.3390/met8070560
- By:
- Publication type:
- Article
6
Influence of Ultrafine Particles on Structure, Mechanical Properties, and Strengthening of Ductile Cast Iron.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 559, doi. 10.3390/met8070559
- By:
- Publication type:
- Article
7
Speciation of Ruthenium(III) Chloro Complexes in Hydrochloric Acid Solutions and Their Extraction Characteristics with an Amide-Containing Amine Compound.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 558, doi. 10.3390/met8070558
- By:
- Publication type:
- Article
8
An Original Tribometer to Analyze the Behavior of Abrasive Grains in the Grinding Process.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 557, doi. 10.3390/met8070557
- By:
- Publication type:
- Article
9
Recovery of Metals from Secondary Raw Materials by Coupled Electroleaching and Electrodeposition in Aqueous or Ionic Liquid Media.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 556, doi. 10.3390/met8070556
- By:
- Publication type:
- Article
10
A Simple and Efficient Method for Obtaining the Whole-Range Uniaxial Tensile Properties of Pipeline Steel.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 555, doi. 10.3390/met8070555
- By:
- Publication type:
- Article
11
Strongly Orthotropic Open Cell Porous Metal Structures for Heat Transfer Applications.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 554, doi. 10.3390/met8070554
- By:
- Publication type:
- Article
12
Fe-Si/MnZn(Fe2O4)2 Core-shell Composites with Excellent Magnetic Properties by Mechanical Milling and Spark Plasma Sintering (SPS).
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 553, doi. 10.3390/met8070553
- By:
- Publication type:
- Article
13
Characterization of Microstructural Refinement and Hardness Profile Resulting from Friction Stir Processing of 6061-T6 Aluminum Alloy Extrusions.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 552, doi. 10.3390/met8070552
- By:
- Publication type:
- Article
14
On the Formation of Micro-Shrinkage Porosities in Ductile Iron Cast Components.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 551, doi. 10.3390/met8070551
- By:
- Publication type:
- Article
15
Metastable Eutectoid Transformation in Spheroidal Graphite Cast Iron: Modeling and Validation.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 550, doi. 10.3390/met8070550
- By:
- Publication type:
- Article
16
Effect of Turning and Surface Polishing Treatments on Surface Integrity and Fatigue Performance of Nickel-Based Alloy GH4169.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 549, doi. 10.3390/met8070549
- By:
- Publication type:
- Article
17
316L Stainless Steel Manufactured by Selective Laser Melting and Its Biocompatibility with or without Hydroxyapatite Coating.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 548, doi. 10.3390/met8070548
- By:
- Publication type:
- Article
18
Zinc Recovery from Steelmaking Dust by Hydrometallurgical Methods.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 547, doi. 10.3390/met8070547
- By:
- Publication type:
- Article
19
A New Method to Recycle Stainless–Steel Duplex UNS S31803 Chips.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 546, doi. 10.3390/met8070546
- By:
- Publication type:
- Article
20
Recovery of Gallium from Corundum Flue Dust by Two-Stage Alkali Leaching, Carbonation, Acid Leaching and Solvent Extraction Process.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 545, doi. 10.3390/met8070545
- By:
- Publication type:
- Article
21
Microstructural, Mechanical and Corrosion Investigations of Ship Steel-Aluminum Bimetal Composites Produced by Explosive Welding.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 544, doi. 10.3390/met8070544
- By:
- Publication type:
- Article
22
Hole Making by Electrical Discharge Machining (EDM) of γ-TiAl Intermetallic Alloys.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 543, doi. 10.3390/met8070543
- By:
- Publication type:
- Article
23
Extraction of Metal Arsenic from Waste Sodium Arsenate by Roasting with Charcoal Powder.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 542, doi. 10.3390/met8070542
- By:
- Publication type:
- Article
24
Electrochemical Behavior of Biodegradable FeMnSi–MgCa Alloy.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 541, doi. 10.3390/met8070541
- By:
- Publication type:
- Article
25
Effects of Chemical Composition and Austenite Deformation on the Onset of Ferrite Formation for Arbitrary Cooling Paths.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 540, doi. 10.3390/met8070540
- By:
- Publication type:
- Article
26
Influences of Compression Ratios on Sound Absorption Performance of Porous Nickel–Iron Alloy.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 539, doi. 10.3390/met8070539
- By:
- Publication type:
- Article
27
Electric Current-Assisted Joining of Copper Plates Using Silver Formed by In-Situ Decomposition of Ag2C2O4.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 538, doi. 10.3390/met8070538
- By:
- Publication type:
- Article
28
Numerical Simulation of Densification of Cu–Al Mixed Metal Powder during Axial Compaction.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 537, doi. 10.3390/met8070537
- By:
- Publication type:
- Article
29
Numerical Model for Predicting Bead Geometry and Microstructure in Laser Beam Welding of Inconel 718 Sheets.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 536, doi. 10.3390/met8070536
- By:
- Publication type:
- Article
30
The Effect of Growth Rate on the Microstructure and Tensile Behaviour of Directionally Solidified Ti-44Al-9Nb-1Cr-0.2W-0.2Y Alloys.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 535, doi. 10.3390/met8070535
- By:
- Publication type:
- Article
31
Inclusion Evolution Behavior of Ti-Mg Oxide Metallurgy Steel and Its Effect on a High Heat Input Welding HAZ.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 534, doi. 10.3390/met8070534
- By:
- Publication type:
- Article
32
Kinetics of Iron Extraction from Coal Fly Ash by Hydrochloric Acid Leaching.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 533, doi. 10.3390/met8070533
- By:
- Publication type:
- Article
33
Advances and Challenges of Biodegradable Implant Materials with a Focus on Magnesium-Alloys and Bacterial Infections.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 532, doi. 10.3390/met8070532
- By:
- Publication type:
- Article
34
Dissolution and Precipitation Behavior for Hot Forming of 7021 and 7075 Aluminum Alloys.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 531, doi. 10.3390/met8070531
- By:
- Publication type:
- Article
35
Investigations on Microstructure and Properties of 16 wt% Cr-3 wt% B-0.6 wt% C-1 wt% Mn-Fe Alloy.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 530, doi. 10.3390/met8070530
- By:
- Publication type:
- Article
36
Cross-Scale Modeling of MnS Precipitation for Steel Solidification.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 529, doi. 10.3390/met8070529
- By:
- Publication type:
- Article
37
Effect of Overaging on the Cyclic Deformation Behavior of an AA6061 Aluminum Alloy.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 528, doi. 10.3390/met8070528
- By:
- Publication type:
- Article
38
The Influence of Microstructural Heterogeneity on Mechanical Properties of Friction Stir Welded Joints of T6-Treated Al-Zn-Mg Alloy 7A52.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 527, doi. 10.3390/met8070527
- By:
- Publication type:
- Article
39
Effect of Tool Rotational Speeds on the Microstructure and Mechanical Properties of a Dissimilar Friction-Stir-Welded CuCrZr/CuNiCrSi Butt Joint.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 526, doi. 10.3390/met8070526
- By:
- Publication type:
- Article
40
The Effect of Pressurized Decarbonization of CO on Inhibiting the Adhesion of Fine Iron Ore Particles.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 525, doi. 10.3390/met8070525
- By:
- Publication type:
- Article
41
Research on Surface Roughness of AlSi10Mg Parts Fabricated by Laser Powder Bed Fusion.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 524, doi. 10.3390/met8070524
- By:
- Publication type:
- Article
42
The Effect of Carbon Dissection of Waste Plastics on Inhibiting the Adhesion of Fine Iron Ore Particles during Hydrogen Reduction.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 523, doi. 10.3390/met8070523
- By:
- Publication type:
- Article
43
Effect of Cold Deformation on Microstructures and Mechanical Properties of Austenitic Stainless Steel.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 522, doi. 10.3390/met8070522
- By:
- Publication type:
- Article
44
Substrate-Induced Liquid Layering: A New Insight into the Heterogeneous Nucleation of Liquid Metals.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 521, doi. 10.3390/met8070521
- By:
- Publication type:
- Article
45
Influence of Stress State on the Mechanical Impact and Deformation Behaviors of Aluminum Alloys.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 520, doi. 10.3390/met8070520
- By:
- Publication type:
- Article
46
Predictive Simulation of Plastic Processing of Welded Stainless Steel Pipes.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 519, doi. 10.3390/met8070519
- By:
- Publication type:
- Article
47
Calix[4]arene-Based Amino Extractants Containing n-Alkyl Moieties for Separation of Pd(II) and Pt(IV) from Leach Liquors of Automotive Catalysts.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 517, doi. 10.3390/met8070517
- By:
- Publication type:
- Article
48
Effect of Rolling Reduction on Microstructure and Property of Ultrafine Grained Low-Carbon Steel Processed by Cryorolling Martensite.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 518, doi. 10.3390/met8070518
- By:
- Publication type:
- Article
49
An Efficient Powder Metallurgy Processing Route to Prepare High-Performance β-Ti–Nb Alloys Using Pure Titanium and Titanium Hydride Powders.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 516, doi. 10.3390/met8070516
- By:
- Publication type:
- Article
50
Mn3O4 Octahedral Microparticles Prepared by Facile Dealloying Process as Efficient Sulfur Hosts for Lithium/Sulfur Batteries.
- Published in:
- Metals (2075-4701), 2018, v. 8, n. 7, p. 515, doi. 10.3390/met8070515
- By:
- Publication type:
- Article