Works matching IS 20754442 AND DT 2023 AND VI 11 AND IP 9

Results: 61

Modeling Wear and Friction Regimes on Ceramic Materials with Positive and Negative Thermal Expansion.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 414, doi. 10.3390/lubricants11090414

By:

Grigoriev, Aleksandr S.;
Shilko, Evgeny V.;
Dmitriev, Andrey I.;
Tarasov, Sergei Y.

Publication type:

Article

An Investigation of the High-Speed Machinability of 7050 Aluminum Alloy Based on Different Prefabricated Crystal Orientations.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 413, doi. 10.3390/lubricants11090413

By:

Ni, Chenbing;
Lu, Wei;
Wang, Youqiang;
Zong, Chengguo;
Liu, Dejian;
Liu, Guoliang

Publication type:

Article

Effect of Oxygen and Moisture on the Friction and Wear of Carbon Fiber-Reinforced Polymers.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 412, doi. 10.3390/lubricants11090412

By:

Johansson, Pontus;
Marklund, Pär;
Björling, Marcus;
Shi, Yijun

Publication type:

Article

An Evaluation of the Tribological Characteristics of Diaphragm Plates for High-Pressure Hydrogen Gas Compressor Applications.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 411, doi. 10.3390/lubricants11090411

By:

Lee, Sung-Jun;
Sohn, Yoonchul;
Segu, Dawit Zenebe;
Kim, Chang-Lae

Publication type:

Article

Significance of Temperature-Dependent Density on Dissipative and Reactive Flows of Nanofluid along Magnetically Driven Sheet and Applications in Machining and Lubrications.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 410, doi. 10.3390/lubricants11090410

By:

Ullah, Zia;
Hussain, Ahmad;
Aldhabani, Musaad S.;
Altaweel, Nifeen H.;
Shahab, Sana

Publication type:

Article

Enhancing Quality Control of Chip Seal Construction through Machine Learning-Based Analysis of Surface Macrotexture Metrics.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 409, doi. 10.3390/lubricants11090409

By:

Bao, Jieyi;
Adcock, Joseph;
Li, Shuo;
Jiang, Yi

Publication type:

Article

A New Experimental Methodology to Study Convective Heat Transfer in Oil Jet Lubricated Gear Units.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 408, doi. 10.3390/lubricants11090408

By:

Torres, Thibaut;
Changenet, Christophe;
Touret, Thomas;
Guilbert, Bérengère

Publication type:

Article

Investigation of Friction Coefficient Changes in Recycled Composite Materials under Constant Load.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 407, doi. 10.3390/lubricants11090407

By:

Güneş, Aydın;
Düzcükoğlu, Hayrettin;
Salur, Emin;
Aslan, Abdullah;
Şahin, Ömer Sinan

Publication type:

Article

A Hydraulic Axial Piston Pump Fault Diagnosis Based on Instantaneous Angular Speed under Non-Stationary Conditions.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 406, doi. 10.3390/lubricants11090406

By:

Liu, Jiamin;
Meng, Shuai;
Zhou, Xintao;
Gu, Lichen

Publication type:

Article

Effect of Graphene on Nickel Surface Relaxation: Molecular Dynamics Simulation.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 405, doi. 10.3390/lubricants11090405

By:

Konorev, Sergiy;
Yanchuk, Vitalii;
Kruhlov, Ivan;
Orlov, Andrii;
Sidorenko, Sergii;
Vladymyrskyi, Igor;
Prikhodko, Sergey;
Voloshko, Svitlana

Publication type:

Article

Oil Degradation Patterns in Diesel and Petrol Engines Observed in the Field—An Approach Applying Mass Spectrometry.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 404, doi. 10.3390/lubricants11090404

By:

Agocs, Adam;
Nagy, András Lajos;
Ristic, Andjelka;
Tabakov, Zsolt Miklós;
Raffai, Péter;
Besser, Charlotte;
Frauscher, Marcella

Publication type:

Article

Graphite Fluoride as a Novel Solider Lubricant Additive for Ultra-High-Molecular-Weight Polyethylene Composites with Excellent Tribological Properties.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 403, doi. 10.3390/lubricants11090403

By:

Huang, Guodong;
Zhang, Tao;
Chen, Yi;
Yang, Fei;
Huang, Huadong;
Zhao, Yongwu

Publication type:

Article

Steady-State Temperature Field and Rolling Resistance Characteristics of Low-Speed and Low-Load Capacity Non-Pneumatic Tires.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 402, doi. 10.3390/lubricants11090402

By:

Liu, Shuo;
Liu, Weidong;
Zhou, Shen;
Li, Xiujuan;
Zhang, Qiushi

Publication type:

Article

Load Carrying Capacity Enhancing Design and Lubrication Investigation of the Magnetic-Water Double Suspension Elastic Support Thrust Bearing.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 401, doi. 10.3390/lubricants11090401

By:

Wang, Bin;
Ouyang, Wu;
Wang, Shengtong;
Sheng, Chenxing;
He, Tao;
Yan, Ziyang

Publication type:

Article

Oil-Sealing Performance Evaluation of Labyrinth Seal Using Combined Finite Element Analysis and Computational Fluid Dynamics.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 400, doi. 10.3390/lubricants11090400

By:

Park, Won Man;
Son, Sung Man;
Choi, Dae Kyung;
Lee, Hong Guk;
Choi, Choengryul

Publication type:

Article

Determination of the Friction Coefficient in the Ring Test for Selected Lubricants Dedicated to the Hot Forging Process of Precision Steel Products.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 399, doi. 10.3390/lubricants11090399

By:

Dudkiewicz, Łukasz;
Hawryluk, Marek;
Ziemba, Jacek;
Miżejewski, Adrian;
Polak, Sławomir;
Marzec, Jan;
Szymańska, Tatiana

Publication type:

Article

Planar Reconstruction of Regular Surfaces' Three-Dimensional Morphology and Tribology Application.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 398, doi. 10.3390/lubricants11090398

By:

Xu, Xiang;
Feng, Zekang;
Xiao, Nengqi;
Zhao, Xinze;
Zhang, Zuyue

Publication type:

Article

Reducing Wheel Loading in the Grinding of Titanium Alloys through Ultrasonic-Assisted Plasma Oxidation Modification.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 397, doi. 10.3390/lubricants11090397

By:

Wu, Hanqiang;
Ye, Ximin;
Chen, Zhuo;
Zhang, Shibo;
Zeng, Jiang;
Wang, Qiang;
Wu, Yongbo

Publication type:

Article

Numerical Analysis of Double Riveted Lap Joints.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 396, doi. 10.3390/lubricants11090396

By:

Livieri, Paolo

Publication type:

Article

Partial Surface Texturing in Hydrodynamic Lubrication: A CFD-Based Investigation.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 395, doi. 10.3390/lubricants11090395

By:

Cohen, Igal;
Goltsberg, Roman

Publication type:

Article

Reply to Bair, S. Comment on "Neupert, T.; Bartel, D. Evaluation of Various Shear-Thinning Models for Squalane Using Traction Measurements, TEHD and NEMD Simulations. Lubricants 2023, 11 , 178".

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 394, doi. 10.3390/lubricants11090394

By:

Neupert, Thomas;
Bartel, Dirk

Publication type:

Article

Comment on Neupert, T.; Bartel, D. Evaluation of Various Shear-Thinning Models for Squalane Using Traction Measurements, TEHD and NEMD Simulations. Lubricants 2023, 11 , 178.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 393, doi. 10.3390/lubricants11090393

By:

Bair, Scott

Publication type:

Article

Manipulate A2/B2 Structures in AlCrFe x Ni Alloys for Improved Mechanical Properties and Wear Resistance.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 392, doi. 10.3390/lubricants11090392

By:

Diao, Guijiang;
Wu, Mingyu;
He, Anqiang;
Xu, Zhen;
Mousavi, Seyed Elias;
Li, Dongyang

Publication type:

Article

Current and Future Trends in Tribological Research.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 391, doi. 10.3390/lubricants11090391

By:

Johns-Rahnejat, Patricia M.;
Rahmani, Ramin;
Rahnejat, Homer

Publication type:

Article

Thermodynamic Analysis Based on the ZL205A Alloy Milling Force Model Study.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 390, doi. 10.3390/lubricants11090390

By:

Cui, Jing;
Shen, Xingquan;
Xin, Zhijie;
Lu, Huihu;
Shi, Yanhao;
Huang, Xiaobin;
Sun, Baoyu

Publication type:

Article

Intelligent Tool Wear Monitoring Method Using a Convolutional Neural Network and an Informer.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 389, doi. 10.3390/lubricants11090389

By:

Xie, Xingang;
Huang, Min;
Sun, Weiwei;
Li, Yiming;
Liu, Yue

Publication type:

Article

A Finite Element Analysis of Cold Deep Drawing of Al Alloy Considering Friction Condition and Corner Design of Plunger.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 388, doi. 10.3390/lubricants11090388

By:

Bahanan, Warda;
Fatimah, Siti;
Go, Jae Hoon;
Oh, Jeong Moo;
Kim, Min Jun;
Kim, Myung Jae;
Kang, Jee-Hyun;
Kim, Dong-Ju;
Widiantara, I Putu;
Ko, Young Gun

Publication type:

Article

A BPNN-QSTR Model for Friction-Reducing Performance of Organic Liquid Lubricants on SiC/PI Friction Pair.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 387, doi. 10.3390/lubricants11090387

By:

Wang, Tingting;
Zhang, Liang;
Chen, Hao;
Wu, Li;
Gao, Xinlei

Publication type:

Article

Significant Improvement in Wear Resistance of CoCrFeNi High-Entropy Alloy via Boron Doping.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 386, doi. 10.3390/lubricants11090386

By:

Zhang, Haitao;
Miao, Junwei;
Wang, Chenglin;
Li, Tingju;
Zou, Longjiang;
Lu, Yiping

Publication type:

Article

Experimental Study on Friction and Wear Characteristics of Hydraulic Reciprocating Rotary Seals.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 385, doi. 10.3390/lubricants11090385

By:

Zhang, Zongyi;
Gao, Dianrong;
Guan, Tianyuan;
Liang, Yingna;
Zhao, Jianhua;
Wang, Liwen;
Tang, Jie

Publication type:

Article

An Investigation of the Sequential Micro-Laser Drilling and Conventional Re-Drilling of Angled Holes in an Inconel 625 Ni-Based Alloy.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 384, doi. 10.3390/lubricants11090384

By:

Szwajka, Krzysztof;
Zielińska-Szwajka, Joanna;
Żaba, Krzysztof;
Trzepieciński, Tomasz

Publication type:

Article

Rolling Bearing Fault Diagnosis across Operating Conditions Based on Unsupervised Domain Adaptation.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 383, doi. 10.3390/lubricants11090383

By:

Zhong, Zhidan;
Liu, Hao;
Mao, Wentao;
Xie, Xinghui;
Cui, Yunhao

Publication type:

Article

Unlocking the Potential of Soft Computing for Predicting Lubricant Elemental Spectroscopy.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 382, doi. 10.3390/lubricants11090382

By:

Pourramezan, Mohammad-Reza;
Rohani, Abbas;
Abbaspour-Fard, Mohammad Hossein

Publication type:

Article

Experimental Investigation on the Effect of Velocity Anisotropy on Oil Film State under Different Surface Wettability Interface.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 381, doi. 10.3390/lubricants11090381

By:

Wang, Zuomin;
Zhang, Jianjun;
Wang, Shijin;
Wang, Weihui;
Che, Qinglun

Publication type:

Article

Influence of Molecular Structure on the Physicochemical and Tribological Properties of Biolubricants: A Review.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 380, doi. 10.3390/lubricants11090380

By:

Sanjurjo, Claudia;
Rodríguez, Eduardo;
Viesca, José L.;
Battez, A. Hernández

Publication type:

Article

Improving the Surface Integrity and Tribological Behavior of a High-Temperature Friction Surface via the Synergy of Laser Cladding and Ultrasonic Burnishing.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 379, doi. 10.3390/lubricants11090379

By:

Xu, Nan;
Jiang, Xiaochen;
Shen, Xuehui;
Peng, Hao

Publication type:

Article

Dynamics-Based Calculation of the Friction Power Consumption of a Solid Lubricated Bearing in an Ultra-Low Temperature Environment.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 372, doi. 10.3390/lubricants11090372

By:

Su, Bing;
Mao, Shuanglong;
Zhang, Guangtao;
Li, Han;
Cui, Yongcun

Publication type:

Article

Influence of Cavitation on the Heat Transfer of High-Speed Mechanical Seal with Textured Side Wall.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 378, doi. 10.3390/lubricants11090378

By:

Yu, Minfeng;
Peng, Xudong;
Meng, Xiangkai;
Jiang, Jinbo;
Ma, Yi

Publication type:

Article

Optimization of the Tribological Performance and Service Life of Calcium Sulfonate Complex—Polyurea Grease Based on Unreplicated Saturated Factorial Design.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 377, doi. 10.3390/lubricants11090377

By:

Zhang, Hong;
Mo, Yimin;
Liu, Qingchun;
Wang, Jun;
Li, Qian

Publication type:

Article

Finite Element Analysis of the Influence of the Assembly Parameters on the Fretting Phenomena at the Bearing/Big End Interface in High-Performance Connecting Rods.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 375, doi. 10.3390/lubricants11090375

By:

Renso, Fabio;
Barbieri, Saverio Giulio;
Mangeruga, Valerio;
Giacopini, Matteo

Publication type:

Article

Effect of Groove Structure on Lubrication Performance of Water-Lubricated Stern Tube Bearings.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 374, doi. 10.3390/lubricants11090374

By:

Zhang, Shengdong

Publication type:

Article

Lubricant-Free Thermoforming Mold Using Pulse Electrochemical Polishing.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 373, doi. 10.3390/lubricants11090373

By:

Kwak, Seong Ung;
Kim, Uk Su;
Park, Jeong Woo

Publication type:

Article

The Surface Assessment and the Properties of Selected Multilayer Coatings.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 371, doi. 10.3390/lubricants11090371

By:

Warcholinski, Bogdan;
Gilewicz, Adam;
Tarnowska, Maria

Publication type:

Article

Investigation of Programmable Friction with Ionic Liquid Mixtures at the Nano- and Macroscales.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 376, doi. 10.3390/lubricants11090376

By:

Gatti, Felix Joachim;
Cai, Wanhao;
Herzog, Richard;
Gharavian, Amirmasoud;
Kailer, Andreas;
Baltes, Norman;
Rabenecker, Peter;
Mörchel, Philipp;
Balzer, Bizan N.;
Amann, Tobias;
Rühe, Jürgen

Publication type:

Article

Research on Evaluation Indicator of Ice Rink and Curling Stone Motion for the 2022 Beijing Winter Olympic Games Based on Video Recognition Method.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 370, doi. 10.3390/lubricants11090370

By:

Yang, Qiyong;
Li, Shuaiyu;
Li, Junxing;
Zhang, Wenyuan;
Wang, Quan;
Ma, Xiuyue

Publication type:

Article

Predicting Friction of Tapered Roller Bearings with Detailed Multi-Body Simulation Models.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 369, doi. 10.3390/lubricants11090369

By:

Wingertszahn, Patrick;
Koch, Oliver;
Maccioni, Lorenzo;
Concli, Franco;
Sauer, Bernd

Publication type:

Article

Surface Laser Micropatterning of Polyethylene (PE) to Increase the Shearing Strength of Adhesive Joints.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 368, doi. 10.3390/lubricants11090368

By:

Tofil, Szymon;
Kurp, Piotr;
Manikandan, Manoharan

Publication type:

Article

Influence of Nitrile Butadiene Rubber (NBR) Shore Hardness and Polytetrafluoroethylene (PTFE) Elastic Modulus on the Sealing Characteristics of Step Rod Seals.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 367, doi. 10.3390/lubricants11090367

By:

Wang, Bingqing;
Li, Xiaoxuan;
Peng, Xudong;
Li, Yuntang;
Li, Xiang;
Chen, Yuan;
Jin, Jie

Publication type:

Article

Key Parameters and Experimental Study of High-Speed Rotating Meshing Gear Injection Lubrication Based on Moving Particle Semi-Implicit Method.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 366, doi. 10.3390/lubricants11090366

By:

Zou, Tiangang;
Yan, Qingdong;
Sui, Tuo;
Zhao, Zhenguo;
Li, Junye;
An, Yuanyuan

Publication type:

Article

Towards Self-Lubricating Effect of In Situ Iron Tungstate in Rubbing WC/Mn13 Steel Cermet against a HSS Steel.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 9, p. 365, doi. 10.3390/lubricants11090365

By:

Savchenko, Nikolai;
Sevostyanova, Irina;
Panfilov, Alexander;
Moskvichev, Evgeny;
Utyaganova, Veronika;
Vorontsov, Andrey;
Tarasov, Sergei

Publication type:

Article