Works matching IS 20751702 AND DT 2022 AND VI 10 AND IP 12

Results: 139

Combination of Thermal and Mechanical Strategies to Compensate for Distortion Effects during Profile Grinding.

Published in:

Machines, 2022, v. 10, n. 12, p. 1240, doi. 10.3390/machines10121240

By:

Schieber, Christian;
Hettig, Matthias;
Zaeh, Michael Friedrich;
Heinzel, Carsten

Publication type:

Article

Mask-Guided Generation Method for Industrial Defect Images with Non-uniform Structures.

Published in:

Machines, 2022, v. 10, n. 12, p. 1239, doi. 10.3390/machines10121239

By:

Wei, Jing;
Zhang, Zhengtao;
Shen, Fei;
Lv, Chengkan

Publication type:

Article

Nonlinear Analysis of Rotor-Bearing-Seal System with Varying Parameters Muszynska Model Based on CFD and RBF.

Published in:

Machines, 2022, v. 10, n. 12, p. 1238, doi. 10.3390/machines10121238

By:

Wang, Rui;
Wang, Yuefang;
Cao, Xiaojian;
Yang, Shuhua;
Guo, Xinglin

Publication type:

Article

Design and Analysis of Mechanical Characteristics of EAP Flexible Drivers.

Published in:

Machines, 2022, v. 10, n. 12, p. 1241, doi. 10.3390/machines10121241

By:

Li, Bing;
Niu, Shaohua;
Li, Bingyang;
Wang, Pengfei;
Qiao, Yuli

Publication type:

Article

Reinforcement Learning Control of Hydraulic Servo System Based on TD3 Algorithm.

Published in:

Machines, 2022, v. 10, n. 12, p. 1244, doi. 10.3390/machines10121244

By:

Yuan, Xiaoming;
Wang, Yu;
Zhang, Ruicong;
Gao, Qiang;
Zhou, Zhuangding;
Zhou, Rulin;
Yin, Fengyuan

Publication type:

Article

Modelling of Determinants of Logistics 4.0 Adoption: Insights from Developing Countries.

Published in:

Machines, 2022, v. 10, n. 12, p. 1242, doi. 10.3390/machines10121242

By:

Khan, Shahbaz;
Singh, Rubee;
Sá, José Carlos;
Santos, Gilberto;
Ferreira, Luís Pinto

Publication type:

Article

Orthogonal Experimental Design Based Nozzle Geometry Optimization for the Underwater Abrasive Water Jet.

Published in:

Machines, 2022, v. 10, n. 12, p. 1243, doi. 10.3390/machines10121243

By:

Wang, Xiangyu;
Wu, Yongtao;
Jia, Peng;
Liu, Huadong;
Yun, Feihong;
Li, Zhibo;
Wang, Liquan

Publication type:

Article

Thermal Properties Prediction of Large-Scale Machine Tool in Vacuum Environment Based on the Parameter Identification of Fluid–Thermal Coupling Model.

Published in:

Machines, 2022, v. 10, n. 12, p. 1237, doi. 10.3390/machines10121237

By:

Li, Tianjian;
Xi, Guobin;
Wang, Han;
Tang, Wa;
Shao, Zhongxi;
Sun, Xizhi

Publication type:

Article

A Transferable Thruster Fault Diagnosis Approach for Autonomous Underwater Vehicle under Different Working Conditions with Insufficient Labeled Training Data.

Published in:

Machines, 2022, v. 10, n. 12, p. 1236, doi. 10.3390/machines10121236

By:

Yin, Baoji;
Wang, Ziwei;
Zhang, Mingjun;
Jin, Zhikun;
Liu, Xing

Publication type:

Article

Coordinated Control Strategy of Electro-Hydraulic Composite Braking Torque for the Distributed Electric Vehicles.

Published in:

Machines, 2022, v. 10, n. 12, p. 1235, doi. 10.3390/machines10121235

By:

Zhou, Zhigang;
Yin, Xiaofei;
Zhang, Jie

Publication type:

Article

A General Pose Recognition Method and Its Accuracy Analysis for 6-Axis External Fixation Mechanism Using Image Markers.

Published in:

Machines, 2022, v. 10, n. 12, p. 1234, doi. 10.3390/machines10121234

By:

Liu, Sida;
Song, Yimin;
Lian, Binbin;
Sun, Tao

Publication type:

Article

Machine Learning in CNC Machining: Best Practices.

Published in:

Machines, 2022, v. 10, n. 12, p. 1233, doi. 10.3390/machines10121233

By:

von Hahn, Tim;
Mechefske, Chris K.

Publication type:

Article

Control of Trajectory Tracking for Mobile Manipulator Robot with Kinematic Limitations and Self-Collision Avoidance.

Published in:

Machines, 2022, v. 10, n. 12, p. 1232, doi. 10.3390/machines10121232

By:

Qiao, Lijun;
Luo, Xiao;
Luo, Qingsheng

Publication type:

Article

Experimental and Numerical Study of Collision Attitude Auxiliary Protection Strategy for Subway Vehicles.

Published in:

Machines, 2022, v. 10, n. 12, p. 1231, doi. 10.3390/machines10121231

By:

Xu, Ping;
Yang, Liting;
Guo, Weinian;
Yang, Chengxing;
Che, Quanwei;
Xu, Tuo

Publication type:

Article

Constraint Definition for Gripper Selection and Grasp Planning for Robotic Assembly Using Product Manufacturing Information from STEP AP242Ed2 Files.

Published in:

Machines, 2022, v. 10, n. 12, p. 1230, doi. 10.3390/machines10121230

By:

Mohammed, Shafi Khurieshi;
Arbo, Mathias Hauan;
Tingelstad, Lars

Publication type:

Article

Fuzzy Broad Learning System Combined with Feature-Engineering-Based Fault Diagnosis for Bearings.

Published in:

Machines, 2022, v. 10, n. 12, p. 1229, doi. 10.3390/machines10121229

By:

Zhou, Jianmin;
Yang, Xiaotong;
Liu, Lulu;
Wang, Yunqing;
Wang, Junjie;
Hou, Guanghao

Publication type:

Article

State Estimation of Memristor Neural Networks with Model Uncertainties.

Published in:

Machines, 2022, v. 10, n. 12, p. 1228, doi. 10.3390/machines10121228

By:

Ma, Libin;
Wang, Mao

Publication type:

Article

Model-Based Field Winding Interturn Fault Detection Method for Brushless Synchronous Machines.

Published in:

Machines, 2022, v. 10, n. 12, p. 1227, doi. 10.3390/machines10121227

By:

Mahtani, Kumar;
Guerrero, José M.;
Beites, Luis F.;
Platero, Carlos A.

Publication type:

Article

A Novel Combination Neural Network Based on ConvLSTM-Transformer for Bearing Remaining Useful Life Prediction.

Published in:

Machines, 2022, v. 10, n. 12, p. 1226, doi. 10.3390/machines10121226

By:

Deng, Feiyue;
Chen, Zhe;
Liu, Yongqiang;
Yang, Shaopu;
Hao, Rujiang;
Lyu, Litong

Publication type:

Article

Sliding Mode Based Load Frequency Control and Power Smoothing of Power Systems with Wind and BESS Penetration.

Published in:

Machines, 2022, v. 10, n. 12, p. 1225, doi. 10.3390/machines10121225

By:

Deng, Zhiwen;
Xu, Chang;
Huo, Zhihong;
Han, Xingxing;
Xue, Feifei

Publication type:

Article

New Anti-Derailment System in Railway Crossings.

Published in:

Machines, 2022, v. 10, n. 12, p. 1224, doi. 10.3390/machines10121224

By:

Sala, Antonio J.;
Felez, Jesus;
de Dios Sanz, Juan;
Gonzalez, Jaime

Publication type:

Article

Minimizing Misalignment and Frame Protrusion of Shoulder Exoskeleton via Optimization for Reducing Interaction Force and Minimizing Volume.

Published in:

Machines, 2022, v. 10, n. 12, p. 1223, doi. 10.3390/machines10121223

By:

Yoon, Jihwan;
Kim, Sumin;
Moon, Junyoung;
Kim, Jehyeok;
Lee, Giuk

Publication type:

Article

A Control Method of Mobile Manipulator Based on Null-Space Task Planning and Hybrid Control.

Published in:

Machines, 2022, v. 10, n. 12, p. 1222, doi. 10.3390/machines10121222

By:

Zhang, Shijun;
Cheng, Shuhong;
Jin, Zhenlin

Publication type:

Article

Indirect Estimation of Tire Pressure on Several Road Pavements via Interacting Multiple Model Approach.

Published in:

Machines, 2022, v. 10, n. 12, p. 1221, doi. 10.3390/machines10121221

By:

Brancati, Renato;
Tufano, Francesco

Publication type:

Article

Gear Wheel Finishing with Abrasive Brushing Tools to Improve the Surface Quality of Tooth Flanks for the Industrial Application.

Published in:

Machines, 2022, v. 10, n. 12, p. 1220, doi. 10.3390/machines10121220

By:

Gülzow, Bernhard;
Uhlmann, Eckart

Publication type:

Article

Elastostatic Stiffness Modeling and Performance Evaluation of a 2UPR–2PRU Redundantly Actuated Parallel Manipulator.

Published in:

Machines, 2022, v. 10, n. 12, p. 1219, doi. 10.3390/machines10121219

By:

Chai, Xinxue;
Ye, Wei;
Li, Qinchuan;
Xu, Lingmin

Publication type:

Article

Load Distribution and Dynamic Response in Torque Split Applications.

Published in:

Machines, 2022, v. 10, n. 12, p. 1218, doi. 10.3390/machines10121218

By:

Civan, Süleyman Emre;
Demir, Cihan

Publication type:

Article

Optimal Stator and Rotor Slots Design of Induction Motors for Electric Vehicles Using Opposition-Based Jellyfish Search Optimization.

Published in:

Machines, 2022, v. 10, n. 12, p. 1217, doi. 10.3390/machines10121217

By:

Juhaniya, Ahamed Ibrahim Sithy;
Ibrahim, Ahmad Asrul;
Mohd Zainuri, Muhammad Ammirrul Atiqi;
Zulkifley, Mohd Asyraf;
Remli, Muhammad Akmal

Publication type:

Article

Design and Performance Investigation of a Vehicle Drive System with a 12/10 Flux-Switching Permanent Magnet Motor.

Published in:

Machines, 2022, v. 10, n. 12, p. 1216, doi. 10.3390/machines10121216

By:

Chi, Yada;
Shi, Guangyuan;
Guo, Haorong;
Yang, Nan;
Zhu, Chengcheng;
Cui, Minchao

Publication type:

Article

Dynamics Analysis and Deep Learning-Based Fault Diagnosis of Defective Rolling Element Bearing on the Multi-Joint Robot.

Published in:

Machines, 2022, v. 10, n. 12, p. 1215, doi. 10.3390/machines10121215

By:

Zhang, Wentao;
Zhang, Ting;
Cui, Guohua;
Pan, Ying

Publication type:

Article

A Novel Simplified FE Rail Vehicle Model in Longitudinal and Lateral Collisions.

Published in:

Machines, 2022, v. 10, n. 12, p. 1214, doi. 10.3390/machines10121214

By:

Deng, Gongxun;
Peng, Yong;
Hou, Lin;
Li, Zhixiang;
Li, Benhuai;
Yu, Chao;
Simms, Ciaran

Publication type:

Article

Weak Fault Feature Extraction of Axle Box Bearing Based on Pre-Identification and Singular Value Decomposition.

Published in:

Machines, 2022, v. 10, n. 12, p. 1213, doi. 10.3390/machines10121213

By:

Zhao, Le;
Yang, Shaopu;
Liu, Yongqiang

Publication type:

Article

Effect of Optimization Software on Part Shape Accuracy and Production Times during Rough Milling of Aluminum Alloy.

Published in:

Machines, 2022, v. 10, n. 12, p. 1212, doi. 10.3390/machines10121212

By:

Ižol, Peter;
Brindza, Jozef;
Vrabeľ, Marek;
Demko, Michal;
Basilio, Shander

Publication type:

Article

Mechanism Design and Performance Analysis of a Wearable Hand Rehabilitation Robot.

Published in:

Machines, 2022, v. 10, n. 12, p. 1211, doi. 10.3390/machines10121211

By:

Du, Jiazheng;
Tian, Yu;
Zhang, Dagan;
Wang, Hongbo;
Zhang, Yongshun;
Cheng, Bo;
Niu, Jianye

Publication type:

Article

Design of a Novel LLE for Energy Saving.

Published in:

Machines, 2022, v. 10, n. 12, p. 1210, doi. 10.3390/machines10121210

By:

Garcia, Miguel;
Gómez, Fabio;
Magadán, Andrea;
Arias, Manuel;
Martínez, Eladio;
Blanco, Andrés

Publication type:

Article

Design and Validation of a Testing 4D Mechatronic System for Measurement and Integrated Control of Processes.

Published in:

Machines, 2022, v. 10, n. 12, p. 1209, doi. 10.3390/machines10121209

By:

Ilie, Iulian;
Machado, José

Publication type:

Article

GA-Based Permutation Logic for Grid Integration of Offshore Multi-Source Renewable Parks.

Published in:

Machines, 2022, v. 10, n. 12, p. 1208, doi. 10.3390/machines10121208

By:

Rojas-Delgado, Brenda;
Ekweoba, Chisom;
Lavidas, George;
Temiz, Irina

Publication type:

Article

Circular Economy in Practice: Building a Simple Greenhouse from Recycled Plastic.

Published in:

Machines, 2022, v. 10, n. 12, p. 1207, doi. 10.3390/machines10121207

By:

Yang, Cheng-Jung;
Lin, Mei-Jyun;
Chen, Po-Tuan;
Chiu, Hsin-Lin

Publication type:

Article

A Novel Suppression Method for Low-Order Harmonics Causing Resonance of Induction Motor.

Published in:

Machines, 2022, v. 10, n. 12, p. 1206, doi. 10.3390/machines10121206

By:

Song, Pengyun;
Liu, Yanghui;
Liu, Tao;
Wang, Huazhang;
Wang, Liwei

Publication type:

Article

Recent Advancements in the Tribological Modelling of Rough Interfaces.

Published in:

Machines, 2022, v. 10, n. 12, p. 1205, doi. 10.3390/machines10121205

By:

Menga, Nicola;
Putignano, Carmine;
Carbone, Giuseppe

Publication type:

Article

Hybrid Feature Selection Framework for Bearing Fault Diagnosis Based on Wrapper-WPT.

Published in:

Machines, 2022, v. 10, n. 12, p. 1204, doi. 10.3390/machines10121204

By:

Maliuk, Andrei S.;
Ahmad, Zahoor;
Kim, Jong-Myon

Publication type:

Article

Numerical Simulation and Experiment on Excavating Resistance of an Electric Cable Shovel Based on EDEM-RecurDyn Bidirectional Coupling.

Published in:

Machines, 2022, v. 10, n. 12, p. 1203, doi. 10.3390/machines10121203

By:

Feng, Yinnan;
Wu, Juan;
Guo, Chenhao;
Lin, Baoguo

Publication type:

Article

Research on Generating Gear Grinding Machining Error Based on Mapping Relationship between Grinding Wheel Surface and Tooth Flank.

Published in:

Machines, 2022, v. 10, n. 12, p. 1202, doi. 10.3390/machines10121202

By:

Jiang, Hong;
Han, Jiang;
Tian, Xiaoqing;
Lu, Yiguo;
Li, Guanghui;
Xia, Lian

Publication type:

Article

Effect of Coolant Temperature on the Thermal Compensation of a Machine Tool.

Published in:

Machines, 2022, v. 10, n. 12, p. 1201, doi. 10.3390/machines10121201

By:

Maurya, Swami Nath;
Li, Kun-Ying;
Luo, Win-Jet;
Kao, Shih-Ying

Publication type:

Article

3D Environment Mapping with a Variable Resolution NDT Method.

Published in:

Machines, 2022, v. 10, n. 12, p. 1200, doi. 10.3390/machines10121200

By:

Feng, Yang;
Gao, Zhiyuan;
Zhang, Jinghan;
Shi, Hang;
Xie, Yangmin

Publication type:

Article

A Study of 2D Contour Measurement System at Tool Center Point of Machine Tools.

Published in:

Machines, 2022, v. 10, n. 12, p. 1199, doi. 10.3390/machines10121199

By:

Yu, Ben-Fong;
Chen, Jenq-Shyong;
Tsai, Hung-Yih

Publication type:

Article

Real-Time Neural Classifiers for Sensor and Actuator Faults in Three-Phase Induction Motors.

Published in:

Machines, 2022, v. 10, n. 12, p. 1198, doi. 10.3390/machines10121198

By:

Sanchez, Oscar D.;
Martinez-Soltero, Gabriel;
Alvarez, Jesus G.;
Alanis, Alma Y.

Publication type:

Article

Effect of Process Parameters on Stress Field of Laser Additive Manufacturing.

Published in:

Machines, 2022, v. 10, n. 12, p. 1197, doi. 10.3390/machines10121197

By:

Liu, Yulin;
Li, Qi;
Ren, Zhaohui;
Jiang, Zeyu;
Luo, Hengfa;
Zhang, Xingwen

Publication type:

Article

Modeling and Characteristic Analysis of a Cylinder Block/Valve Plate Interface Oil Film Model for 35 MPa Aviation Piston Pumps.

Published in:

Machines, 2022, v. 10, n. 12, p. 1196, doi. 10.3390/machines10121196

By:

Wang, Tianzhao;
Fang, Jingjing;
Liu, Hao;
Chen, Lijun;
Ouyang, Xiaoping;
Guo, Shengrong;
Zhao, Xiaojun;
Lu, Yijie

Publication type:

Article

Hierarchical Reinforcement Learning for Multi-Objective Real-Time Flexible Scheduling in a Smart Shop Floor.

Published in:

Machines, 2022, v. 10, n. 12, p. 1195, doi. 10.3390/machines10121195

By:

Chang, Jingru;
Yu, Dong;
Zhou, Zheng;
He, Wuwei;
Zhang, Lipeng

Publication type:

Article