Works matching IS 20734360 AND DT 2024 AND VI 16 AND IP 24
Results: 165
3D-Printed Acrylated Soybean Oil Scaffolds with Vitrimeric Properties Reinforced by Tellurium-Doped Bioactive Glass.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3614, doi. 10.3390/polym16243614
- By:
- Publication type:
- Article
The Integration of Microwave-Synthesized Silver Colloidal Nanoparticles into Poly (Lactic Acid)-Based Textiles as Antimicrobial Agents via Pre- and Post-Electrospinning Processes.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3613, doi. 10.3390/polym16243613
- By:
- Publication type:
- Article
Mechanics of Surface Instabilities in Soft Dielectrics Subject to Electromechanical Loading.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3612, doi. 10.3390/polym16243612
- By:
- Publication type:
- Article
Current Positron Studies on the Modifications of the Molecular Packing in Green-Based Polymers Through Changes in the Synthesis Procedures or Environmental Conditions.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3611, doi. 10.3390/polym16243611
- By:
- Publication type:
- Article
High Speed Sintering of Polyamide 12: From Powder to Part Properties.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3605, doi. 10.3390/polym16243605
- By:
- Publication type:
- Article
Sustainable Multi-Cycle Physical Recycling of Expanded Polystyrene Waste for Direct Ink Write 3D Printing and Casting: Analysis of Mechanical Properties.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3609, doi. 10.3390/polym16243609
- By:
- Publication type:
- Article
In Situ Preparation of Silver Nanoparticles/Organophilic-Clay/Polyethylene Glycol Nanocomposites for the Reduction of Organic Pollutants.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3608, doi. 10.3390/polym16243608
- By:
- Publication type:
- Article
Alkali-Polymer Flooding in an Austrian Brownfield: From Laboratory to Field—Insights.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3607, doi. 10.3390/polym16243607
- By:
- Publication type:
- Article
Poly(3-hydroxybutyrate) Modified with Thermoplastic Polyurethane and Microfibrillated Cellulose: Hydrolytic Degradation and Thermal and Mechanical Properties.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3606, doi. 10.3390/polym16243606
- By:
- Publication type:
- Article
A Novel Polytetrahydrofuran-Based Shape Memory Polyurethane Enhanced by Polyglycolide-Block-Polytetrahydrofuran-Block-Polyglycolide Copolymer.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3610, doi. 10.3390/polym16243610
- By:
- Publication type:
- Article
Development of a Modular Sandwich Panel with a Composite Core of Recycled Material for Application in Sustainable Building.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3604, doi. 10.3390/polym16243604
- By:
- Publication type:
- Article
Participation of Polymer Materials in the Structure of Piezoelectric Composites.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3603, doi. 10.3390/polym16243603
- By:
- Publication type:
- Article
Extraction of Natural-Based Raw Materials Towards the Production of Sustainable Man-Made Organic Fibres.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3602, doi. 10.3390/polym16243602
- By:
- Publication type:
- Article
The Influence of Fresh Latex Coagulation on the Parameter Characteristics of the Yeoh Hyperelastic Constitutive Model for Natural Rubber.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3601, doi. 10.3390/polym16243601
- By:
- Publication type:
- Article
Designing Microparticles of Luteolin and Naringenin in Different Carriers via Supercritical Antisolvent Process.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3600, doi. 10.3390/polym16243600
- By:
- Publication type:
- Article
Examining the Mechanical and Thermal Properties of a Novel Hybrid Thermoplastic Rubber Composite Made with Polypropylene, Polybutadiene, S-Glass Fibre, and Flax Fibre.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3599, doi. 10.3390/polym16243599
- By:
- Publication type:
- Article
Highlighting Free-Recovery and Work-Generating Shape Memory Effects at 80r-PET Thermoformed Cups.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3598, doi. 10.3390/polym16243598
- By:
- Publication type:
- Article
Predicting Curing Distortion in Composite Manufacturing—A Fast and Cost-Efficient Numerical Simulation Method.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3597, doi. 10.3390/polym16243597
- By:
- Publication type:
- Article
RETRACTED: Ahmed et al. Thermal Analysis of a Metal–Organic Framework ZnxCo 1-X -ZIF-8 for Recent Applications. Polymers 2021, 13 , 4051.
- Published in:
- 2024
- By:
- Publication type:
- Correction Notice
Fabrication of Polytetrafluoroethylene-Reinforced Fluorocarbon Composite Coatings and Tribological Properties Under Multi-Environment Working Conditions.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3595, doi. 10.3390/polym16243595
- By:
- Publication type:
- Article
Closing Editorial.
- Published in:
- 2024
- By:
- Publication type:
- Editorial
The Stability Evaluation of Ceria Slurry Using Polymer Dispersants with Varying Contents for Chemical Mechanical Polishing Process.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3593, doi. 10.3390/polym16243593
- By:
- Publication type:
- Article
Clarification of Bio-Degumming Enzymes Based on a Visual Analysis of the Hemp Roving Structure.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3592, doi. 10.3390/polym16243592
- By:
- Publication type:
- Article
Effects of Fiber Orientation on the Bearing Strength of 3D-Printed Composite Materials Produced by Fused Filament Fabrication.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3591, doi. 10.3390/polym16243591
- By:
- Publication type:
- Article
Detecting Early Degradation of Wood Ultrastructure with Nonlinear Optical Imaging and Fluorescence Lifetime Analysis.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3590, doi. 10.3390/polym16243590
- By:
- Publication type:
- Article
Improving the Impact Resistance and Post-Impact Tensile Fatigue Damage Tolerance of Carbon Fiber Reinforced Epoxy Composites by Embedding the Carbon Nanoparticles in Matrix.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3589, doi. 10.3390/polym16243589
- By:
- Publication type:
- Article
Optimisation of Clutch Disc Friction Material Using a Multi-Layer Perceptron Artificial Neural Network.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3588, doi. 10.3390/polym16243588
- By:
- Publication type:
- Article
Layered Composites for High Tan Delta Plateau over Wide Temperature Range.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3587, doi. 10.3390/polym16243587
- By:
- Publication type:
- Article
Synthesis of a Bimetallic-Doped Phytate-Melamine Composite as an Efficient Additive for Epoxy Resins with High Fire Safety.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3586, doi. 10.3390/polym16243586
- By:
- Publication type:
- Article
Manifestation of Donor–Acceptor Properties of N-Doped Polymer Carbon Dots During Hydrogen Bonds Formation in Different Solvents.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3585, doi. 10.3390/polym16243585
- By:
- Publication type:
- Article
Synthesis and Characterization of Photocurable Difunctional Monomers for Medical Applications.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3584, doi. 10.3390/polym16243584
- By:
- Publication type:
- Article
New Composite Packaging Material from Edible Oil By-Product Coated with Paraffin Wax for Dry Apricot Slice Packing Under a Modified Atmosphere.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3583, doi. 10.3390/polym16243583
- By:
- Publication type:
- Article
Temperature Areas of Local Inelasticity in Polyoxymethylene.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3582, doi. 10.3390/polym16243582
- By:
- Publication type:
- Article
The Catalytic Degradation of Waste PU and the Preparation of Recycled Materials.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3581, doi. 10.3390/polym16243581
- By:
- Publication type:
- Article
Ultrasonic Effect on the Growth of Crystals from Aqueous Electrolyte Solutions on Polymer Substrates: The Role of Isotopic Composition of Liquid.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3580, doi. 10.3390/polym16243580
- By:
- Publication type:
- Article
Elucidating Extracellular Vesicle Isolation Kinetics via an Integrated Off-Stoichiometry Thiol-Ene and Cyclic Olefin Copolymer Microfluidic Device.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3579, doi. 10.3390/polym16243579
- By:
- Publication type:
- Article
Characterization of Odor-Active 2-Ethyldimethyl-1,3,6-trioxocane Isomers in Polyurethane Materials.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3573, doi. 10.3390/polym16243573
- By:
- Publication type:
- Article
Valorization of Xylose-Rich Medium from Cynara cardunculus Stalks for Lactic Acid Production via Microbial Fermentation.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3577, doi. 10.3390/polym16243577
- By:
- Publication type:
- Article
Design, Analysis, and Testing of a Type V Composite Pressure Vessel for Hydrogen Storage.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3576, doi. 10.3390/polym16243576
- By:
- Publication type:
- Article
Stretchable Thermochromic Fluorescent Fibers Based on Self-Crystallinity Phase Change for Smart Wearable Displays.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3575, doi. 10.3390/polym16243575
- By:
- Publication type:
- Article
Influence of Operating Temperature on Crack Growth Characteristics and Fatigue Life Prediction of Carbon Black-Filled Hydrogenated Nitrile Butadiene Rubber.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3574, doi. 10.3390/polym16243574
- By:
- Publication type:
- Article
Preparation and Characterization of Melamine Aniline Formaldehyde-Organo Clay Nanocomposite Foams (MAFOCF) as a Novel Thermal Insulation Material.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3578, doi. 10.3390/polym16243578
- By:
- Publication type:
- Article
Effect of High-Energy Electron Beam Irradiation on the Structure and Thermoelectric Properties of Polypyrrole.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3572, doi. 10.3390/polym16243572
- By:
- Publication type:
- Article
Thermally Healable Polyurethane Elastomers Based on Biomass Polyester Polyol from Isosorbide and Dimer Fatty Acid.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3571, doi. 10.3390/polym16243571
- By:
- Publication type:
- Article
Fats and Oils as a Sustainable Source of Photopolymerizable Monomers.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3570, doi. 10.3390/polym16243570
- By:
- Publication type:
- Article
Mechanical Property Characterization of Virgin and Recycled PLA Blends in Single-Screw Filament Extrusion for 3D Printing.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3569, doi. 10.3390/polym16243569
- By:
- Publication type:
- Article
Investigation into the Reinforcement Modification of Natural Plant Fibers and the Sustainable Development of Thermoplastic Natural Plant Fiber Composites.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3568, doi. 10.3390/polym16243568
- By:
- Publication type:
- Article
Dynamic Boronic Ester Cross-Linked Polymers with Tunable Properties via Side-Group Engineering.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3567, doi. 10.3390/polym16243567
- By:
- Publication type:
- Article
Towards Green Dentistry: Evaluating the Potential of 4D Printing for Sustainable Orthodontic Aligners with a Reduced Carbon Footprint.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3566, doi. 10.3390/polym16243566
- By:
- Publication type:
- Article
A New Polymeric Hybrid Auxetic Structure Additively Manufactured by Fused Filament Fabrication 3D Printing: Machine Learning-Based Energy Absorption Prediction and Optimization.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 24, p. 3565, doi. 10.3390/polym16243565
- By:
- Publication type:
- Article