Works matching IS 20734360 AND DT 2022 AND VI 14 AND IP 22
Results: 266
Low Molecular Weight Bio-Polyamide 11 Composites Reinforced with Flax and Intraply Flax/Basalt Hybrid Fabrics for Eco-Friendlier Transportation Components.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5053, doi. 10.3390/polym14225053
- By:
- Publication type:
- Article
Norbornene as Key for a Possible Efficient Chemical Recycling in Structures Based on Ethylene.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5052, doi. 10.3390/polym14225052
- By:
- Publication type:
- Article
Dynamic Response of Components Containing Polymer Composites in the Resonance Region for Vibration Amplitudes up to 5g.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5051, doi. 10.3390/polym14225051
- By:
- Publication type:
- Article
A Systematic Investigation of Polymer Influence on Core Scale Wettability Aided by Positron Emission Tomography Imaging.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5050, doi. 10.3390/polym14225050
- By:
- Publication type:
- Article
Electrospun Sound-Absorbing Nanofibrous Webs from Recycled Poly(vinyl butyral).
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5049, doi. 10.3390/polym14225049
- By:
- Publication type:
- Article
The Electrical Conductivity and Mechanical Properties of Monolayer and Multilayer Nanofibre Membranes from Different Fillers: Calculated Based on Parallel Circuit.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5048, doi. 10.3390/polym14225048
- By:
- Publication type:
- Article
Development and Mechanical Characterization of Short Curauá Fiber-Reinforced PLA Composites Made via Fused Deposition Modeling.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5047, doi. 10.3390/polym14225047
- By:
- Publication type:
- Article
One-Part Alkali-Activated Materials: State of the Art and Perspectives.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5046, doi. 10.3390/polym14225046
- By:
- Publication type:
- Article
Moisture-Related Shrinkage Behavior of Wood at Macroscale and Cellular Level.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5045, doi. 10.3390/polym14225045
- By:
- Publication type:
- Article
The EDLC Energy Storage Device Based on a Natural Gelatin (NG) Biopolymer: Tuning the Capacitance through Plasticizer Variation.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5044, doi. 10.3390/polym14225044
- By:
- Publication type:
- Article
Inkjet Printing of Electrodes on Electrospun Micro- and Nanofiber Hydrophobic Membranes for Flexible and Smart Textile Applications.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5043, doi. 10.3390/polym14225043
- By:
- Publication type:
- Article
Development of Smart Bilayer Alginate/Agar Film Containing Anthocyanin and Catechin-Lysozyme.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5042, doi. 10.3390/polym14225042
- By:
- Publication type:
- Article
Characterization of the Mechanical and Morphological Properties of Cow Dung Fiber-Reinforced Polymer Composites: A Comparative Study with Corn Stalk Fiber Composites and Sisal Fiber Composites.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5041, doi. 10.3390/polym14225041
- By:
- Publication type:
- Article
Ascorbic Acid-Modified Silicones: Crosslinking and Antioxidant Delivery.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5040, doi. 10.3390/polym14225040
- By:
- Publication type:
- Article
Warmforming Flow Pressing Characteristics of Continuous Fibre Reinforced Thermoplastic Composites.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5039, doi. 10.3390/polym14225039
- By:
- Publication type:
- Article
Novel Polymeric Nanomaterial Based on Poly(Hydroxyethyl Methacrylate-Methacryloylamidophenylalanine) for Hypertension Treatment: Properties and Drug Release Characteristics.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5038, doi. 10.3390/polym14225038
- By:
- Publication type:
- Article
APTES-Modified Nanocellulose as the Formaldehyde Scavenger for UF Adhesive-Bonded Particleboard and Strawboard.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5037, doi. 10.3390/polym14225037
- By:
- Publication type:
- Article
Core/Double-Sheath Composite Fibers from Poly(ethylene oxide), Poly(L-lactide) and Beeswax by Single-Spinneret Electrospinning.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5036, doi. 10.3390/polym14225036
- By:
- Publication type:
- Article
Pyrolysis of Denim Jeans Waste: Pyrolytic Product Modification by the Addition of Sodium Carbonate.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5035, doi. 10.3390/polym14225035
- By:
- Publication type:
- Article
Human Umbilical Vein Endothelial Cells Form a Network on a Hyaluronic Acid/Gelatin Composite Hydrogel Moderately Crosslinked and Degraded by Hydrogen Peroxide.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5034, doi. 10.3390/polym14225034
- By:
- Publication type:
- Article
Sustainable PHBH–Alumina Nanowire Nanocomposites: Properties and Life Cycle Assessment.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5033, doi. 10.3390/polym14225033
- By:
- Publication type:
- Article
Molecular Dynamics Simulation of the Interfacial Shear Properties between Thermoplastic Polyurethane and Functionalized Graphene Sheet.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5032, doi. 10.3390/polym14225032
- By:
- Publication type:
- Article
Swelling and Collapse of Cylindrical Polyelectrolyte Microgels.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5031, doi. 10.3390/polym14225031
- By:
- Publication type:
- Article
Facile Fabrication of a Bio-Inspired Leaf Vein-Based Ultra-Sensitive Humidity Sensor with a Hygroscopic Polymer.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5030, doi. 10.3390/polym14225030
- By:
- Publication type:
- Article
Synthesis and Characterization of PU/PLCL/CMCS Electrospun Scaffolds for Skin Tissue Engineering.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5029, doi. 10.3390/polym14225029
- By:
- Publication type:
- Article
Poly(Glycerol Succinate) as Coating Material for 1393 Bioactive Glass Porous Scaffolds for Tissue Engineering Applications.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5028, doi. 10.3390/polym14225028
- By:
- Publication type:
- Article
Impact of Particle and Crystallite Size of Ba 0.6 Sr 0.4 TiO 3 on the Dielectric Properties of BST/P(VDF-TrFE) Composites in Fully Printed Varactors.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5027, doi. 10.3390/polym14225027
- By:
- Publication type:
- Article
Design and Ballistic Performance of Hybrid Plates Manufactured from Aramid Composites for Developing Multilayered Armor Systems.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5026, doi. 10.3390/polym14225026
- By:
- Publication type:
- Article
Development of Water Repellent, Non-Friable Tannin-Furanic-Fatty Acids Biofoams.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5025, doi. 10.3390/polym14225025
- By:
- Publication type:
- Article
Temperature Controlled Mechanical Reinforcement of Polyacrylate Films Containing Nematic Liquid Crystals.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5024, doi. 10.3390/polym14225024
- By:
- Publication type:
- Article
Magnetic Resonance Imaging: Time-Dependent Wetting and Swelling Behavior of an Auxetic Hydrogel Based on Natural Polymers.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5023, doi. 10.3390/polym14225023
- By:
- Publication type:
- Article
Preparation and Phytotoxicity Evaluation of Cellulose Acetate Nanoparticles.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5022, doi. 10.3390/polym14225022
- By:
- Publication type:
- Article
Effect of Colorants and Process Parameters on the Properties of Dope-Dyed Polylactic Acid Multifilament Yarns.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5021, doi. 10.3390/polym14225021
- By:
- Publication type:
- Article
Multi-Shaded Edible Films Based on Gelatin and Starch for the Packaging Applications.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5020, doi. 10.3390/polym14225020
- By:
- Publication type:
- Article
Non-Isocyanate Polyurethane Bio-Foam with Inherent Heat and Fire Resistance.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5019, doi. 10.3390/polym14225019
- By:
- Publication type:
- Article
Development of Bioactive Opuntia ficus-indica Edible Films Containing Probiotics as a Coating for Fresh-Cut Fruit.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5018, doi. 10.3390/polym14225018
- By:
- Publication type:
- Article
Height-to-Diameter Ratio and Porosity Strongly Influence Bulk Compressive Mechanical Properties of 3D-Printed Polymer Scaffolds.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5017, doi. 10.3390/polym14225017
- By:
- Publication type:
- Article
The Influence of Different Sustainable Silk-Based Fillers on the Thermal and Mechanical Properties of Polylactic Acid Composites.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5016, doi. 10.3390/polym14225016
- By:
- Publication type:
- Article
Optimal Surface Pre-Reacted Glass Filler Ratio in a Dental Varnish Effective for Inhibition of Biofilm-Induced Root Dentin Demineralization.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5015, doi. 10.3390/polym14225015
- By:
- Publication type:
- Article
The Alterations and Roles of Glycosaminoglycans in Human Diseases.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5014, doi. 10.3390/polym14225014
- By:
- Publication type:
- Article
Evolution of Molar Mass Distributions Using a Method of Partial Moments: Initiation of RAFT Polymerization.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5013, doi. 10.3390/polym14225013
- By:
- Publication type:
- Article
A Salt-Resistant Sodium Carboxymethyl Cellulose Modified by the Heterogeneous Process of Oleate Amide Quaternary Ammonium Salt.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5012, doi. 10.3390/polym14225012
- By:
- Publication type:
- Article
Structural Characterization and Optimization of a Miconazole Oral Gel.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5011, doi. 10.3390/polym14225011
- By:
- Publication type:
- Article
Upcycling Polystyrene.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5010, doi. 10.3390/polym14225010
- By:
- Publication type:
- Article
A Feasible Compatibilization Processing Technique for Improving the Mechanical and Thermal Performance of Rubbery Biopolymer/Graphene Nanocomposites.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5009, doi. 10.3390/polym14225009
- By:
- Publication type:
- Article
Knowledge Mapping of the Literature on Fiber-Reinforced Geopolymers: A Scientometric Review.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5008, doi. 10.3390/polym14225008
- By:
- Publication type:
- Article
Scientific Advancements in Composite Materials for Aircraft Applications: A Review.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5007, doi. 10.3390/polym14225007
- By:
- Publication type:
- Article
The Effect of Chitosan on Plant Physiology, Wound Response, and Fruit Quality of Tomato.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5006, doi. 10.3390/polym14225006
- By:
- Publication type:
- Article
Influence of Initiator Concentration on the Polymerization Course of Methacrylate Bone Cement.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5005, doi. 10.3390/polym14225005
- By:
- Publication type:
- Article
A Critical Review on the Feasibility of Synthetic Polymers Inclusion in Enhancing the Geotechnical Behavior of Soils.
- Published in:
- Polymers (20734360), 2022, v. 14, n. 22, p. 5004, doi. 10.3390/polym14225004
- By:
- Publication type:
- Article