Works matching IS 19961944 AND DT 2020 AND VI 13 AND IP 8

Results: 210

Carbon-Bonded Alumina Filters Coated by Graphene Oxide for Water Treatment.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 2006, doi. 10.3390/ma13082006

By:

Jankovský, Ondřej;
Lojka, Michal;
Jiříčková, Adéla;
Aneziris, Christos G.;
Storti, Enrico;
Sedmidubský, David

Publication type:

Article

Three-Dimensional Printed PLA and PLA/PHA Dumbbell-Shaped Specimens: Material Defects and Their Impact on Degradation Behavior.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 2005, doi. 10.3390/ma13082005

By:

Rydz, Joanna;
Włodarczyk, Jakub;
Gonzalez Ausejo, Jennifer;
Musioł, Marta;
Sikorska, Wanda;
Sobota, Michał;
Hercog, Anna;
Duale, Khadar;
Janeczek, Henryk

Publication type:

Article

Mechanical and Damping Properties of Recycled Aggregate Concrete Modified with Air-Entraining Agent and Polypropylene Fiber.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 2004, doi. 10.3390/ma13082004

By:

Zhou, Chonggang;
Pei, Xingwang;
Li, Wenlong;
Liu, Yijun

Publication type:

Article

Experimental Tests, FEM Constitutive Modeling and Validation of PLGA Bioresorbable Polymer for Stent Applications.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 2003, doi. 10.3390/ma13082003

By:

Bukala, Jakub;
Buszman, Piotr P.;
Małachowski, Jerzy;
Mazurkiewicz, Lukasz;
Sybilski, Kamil

Publication type:

Article

Vanadium-Oxide-Based Thin Films with Ultra-High Thermo-Optic Coefficients at 1550 nm and 2000 nm Wavelengths.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 2002, doi. 10.3390/ma13082002

By:

Abdel-Rahman, Mohamed;
Bahidra, Esam;
Abas, Ahmed Fauzi

Publication type:

Article

Chloride Diffusion in Concrete Protected with a Silane-Based Corrosion Inhibitor.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 2001, doi. 10.3390/ma13082001

By:

Coppola, Luigi;
Coffetti, Denny;
Crotti, Elena;
Gazzaniga, Gabriele;
Pastore, Tommaso

Publication type:

Article

Impact of Laser Structuring on Medical-Grade Titanium: Surface Characterization and In Vitro Evaluation of Osteoblast Attachment.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 2000, doi. 10.3390/ma13082000

By:

Borcherding, Kai;
Marx, Dennis;
Gätjen, Linda;
Specht, Uwe;
Salz, Dirk;
Thiel, Karsten;
Wildemann, Britt;
Grunwald, Ingo

Publication type:

Article

Novel Graphene/In2O3 Nanocubes Preparation and Selective Electrochemical Detection for L-Lysine of Camellia nitidissima Chi.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1999, doi. 10.3390/ma13081999

By:

Cheng, Jinsheng;
Zhong, Sheng;
Wan, Weihong;
Chen, Xiaoyuan;
Chen, Ali;
Cheng, Ying

Publication type:

Article

Biphenyl Wrinkled Mesoporous Silica Nanoparticles for pH-Responsive Doxorubicin Drug Delivery.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1998, doi. 10.3390/ma13081998

By:

Lin, Jason;
Peng, Chuanqi;
Ravi, Sanjana;
Siddiki, A. K. M. Nur Alam;
Zheng, Jie;
Balkus, Kenneth J.

Publication type:

Article

3-D Printed Protective Equipment during COVID-19 Pandemic.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1997, doi. 10.3390/ma13081997

By:

Wesemann, Christian;
Pieralli, Stefano;
Fretwurst, Tobias;
Nold, Julian;
Nelson, Katja;
Schmelzeisen, Rainer;
Hellwig, Elmar;
Spies, Benedikt Christopher

Publication type:

Article

The Effect of Mixed Doping on the Microstructure and Electrophysical Parameters of the Multicomponent PZT-Type Ceramics.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1996, doi. 10.3390/ma13081996

By:

Bochenek, Dariusz;
Niemiec, Przemysław;
Dercz, Grzegorz

Publication type:

Article

In Situ Ternary Boride: Effects on Densification Process and Mechanical Properties of WC-Co Composite Coating.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1995, doi. 10.3390/ma13081995

By:

Bao, Junfeng;
Yu, Yueguang;
Liu, Bowen;
Jia, Chengchang;
Wu, Chao

Publication type:

Article

Performance of Ceramic-Metal Composites as Potential Tool Materials for Friction Stir Welding of Aluminium, Copper and Stainless Steel.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1994, doi. 10.3390/ma13081994

By:

Kolnes, Mart;
Kübarsepp, Jakob;
Sergejev, Fjodor;
Kolnes, Märt;
Tarraste, Marek;
Viljus, Mart

Publication type:

Article

A Method for Instant Estimation of the Temperature Experienced by Fire-Damaged Reinforced Concrete Structures Using Titanium.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1993, doi. 10.3390/ma13081993

By:

Sim, Sang-Rak;
Ryu, Dong-Woo

Publication type:

Article

Bone Regeneration in Critical-Sized Bone Defects Treated with Additively Manufactured Porous Metallic Biomaterials: The Effects of Inelastic Mechanical Properties.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1992, doi. 10.3390/ma13081992

By:

Koolen, Marianne;
Amin Yavari, Saber;
Lietaert, Karel;
Wauthle, Ruben;
Zadpoor, Amir A.;
Weinans, Harrie

Publication type:

Article

CuSCN as the Back Contact for Efficient ZMO/CdTe Solar Cells.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1991, doi. 10.3390/ma13081991

By:

Li, Deng-Bing;
Song, Zhaoning;
Bista, Sandip S.;
Alfadhili, Fadhil K.;
Awni, Rasha A.;
Shrestha, Niraj;
Rhiannon, DeMilt;
Phillips, Adam B.;
Heben, Michael J.;
Ellingson, Randy J.;
Yan, Feng;
Yan, Yanfa

Publication type:

Article

Digitization of One-Piece Oral Implants: A Feasibility Study.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1990, doi. 10.3390/ma13081990

By:

Pieralli, Stefano;
Spies, Benedikt Christopher;
Kohnen, Luisa Valentina;
Beuer, Florian;
Wesemann, Christian

Publication type:

Article

Modulation of Entrapment Efficiency and In Vitro Release Properties of BSA-Loaded Chitosan Microparticles Cross-Linked with Citric Acid as a Potential Protein–Drug Delivery System.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1989, doi. 10.3390/ma13081989

By:

Sedyakina, Natalia;
Kuskov, Andrey;
Velonia, Kelly;
Feldman, Nataliya;
Lutsenko, Sergey;
Avramenko, Grigory

Publication type:

Article

Analytical Thermal Modeling of Powder Bed Metal Additive Manufacturing Considering Powder Size Variation and Packing.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1988, doi. 10.3390/ma13081988

By:

Ning, Jinqiang;
Wang, Wenjia;
Ning, Xuan;
Sievers, Daniel E.;
Garmestani, Hamid;
Liang, Steven Y.

Publication type:

Article

Porous Silicon-Zinc Oxide Nanocomposites Prepared by Atomic Layer Deposition for Biophotonic Applications.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1987, doi. 10.3390/ma13081987

By:

Pavlenko, Mykola;
Myndrul, Valerii;
Gottardi, Gloria;
Coy, Emerson;
Jancelewicz, Mariusz;
Iatsunskyi, Igor

Publication type:

Article

Modern Biodegradable Plastics—Processing and Properties: Part I.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1986, doi. 10.3390/ma13081986

By:

Sikora, Janusz;
Majewski, Łukasz;
Puszka, Andrzej

Publication type:

Article

High Functionality Bio-Polyols from Tall Oil and Rigid Polyurethane Foams Formulated Solely Using Bio-Polyols.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1985, doi. 10.3390/ma13081985

By:

Kirpluks, Mikelis;
Vanags, Edgars;
Abolins, Arnis;
Michalowski, Slawomir;
Fridrihsone, Anda;
Cabulis, Ugis

Publication type:

Article

Nonlinear Buckling Behavior of Spiral Corrugated Sandwich FGM Cylindrical Shells Surrounded by an Elastic Medium.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1984, doi. 10.3390/ma13081984

By:

Tho Hung, Vu;
Thuy Dong, Dang;
Thi Phuong, Nguyen;
Ngoc Ly, Le;
Quang Minh, Tran;
Trung, Nguyen-Thoi;
Hoai Nam, Vu

Publication type:

Article

Effects of Mn, Zn Additions and Cooling Rate on Mechanical and Corrosion Properties of Al-4.6Mg Casting Alloys.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1983, doi. 10.3390/ma13081983

By:

Wu, Chih-Ting;
Lee, Sheng-Long;
Chen, Ye-Feng;
Bor, Hui-Yun;
Liu, Kung-Hui

Publication type:

Article

3D Digital Impression Systems Compared with Traditional Techniques in Dentistry: A Recent Data Systematic Review.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1982, doi. 10.3390/ma13081982

By:

Cicciù, Marco;
Fiorillo, Luca;
D'Amico, Cesare;
Gambino, Dario;
Amantia, Emanuele Mario;
Laino, Luigi;
Crimi, Salvatore;
Campagna, Paola;
Bianchi, Alberto;
Herford, Alan Scott;
Cervino, Gabriele

Publication type:

Article

Residual Compressive Strength of Recycled Aggregate Concretes after High Temperature Exposure.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1981, doi. 10.3390/ma13081981

By:

Varona, Francisco B.;
Baeza-Brotons, Francisco;
Tenza-Abril, Antonio J.;
Baeza, F. Javier;
Bañón, Luis

Publication type:

Article

Graphene Oxide Carboxymethylcellulose Nanocomposite for Dressing Materials.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1980, doi. 10.3390/ma13081980

By:

Saladino, Maria Luisa;
Markowska, Marta;
Carmone, Clara;
Cancemi, Patrizia;
Alduina, Rosa;
Presentato, Alessandro;
Scaffaro, Roberto;
Biały, Dariusz;
Hasiak, Mariusz;
Hreniak, Dariusz;
Wawrzyńska, Magdalena

Publication type:

Article

Dislocation Density Based Flow Stress Model Applied to the PFEM Simulation of Orthogonal Cutting Processes of Ti-6Al-4V.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1979, doi. 10.3390/ma13081979

By:

Rodríguez, Juan Manuel;
Larsson, Simon;
Carbonell, Josep Maria;
Jonsén, Pär

Publication type:

Article

Electronic and Crystallographic Examinations of the Homoepitaxially Grown Rubrene Single Crystals.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1978, doi. 10.3390/ma13081978

By:

Nakayama, Yasuo;
Iwashita, Masaki;
Kikuchi, Mitsuru;
Tsuruta, Ryohei;
Yoshida, Koki;
Gunjo, Yuki;
Yabara, Yusuke;
Hosokai, Takuya;
Koganezawa, Tomoyuki;
Izawa, Seiichiro;
Hiramoto, Masahiro

Publication type:

Article

Biocompatible Gels of Chitosan–Buriti Oil for Potential Wound Healing Applications.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1977, doi. 10.3390/ma13081977

By:

Ferreira, Maria Onaira Gonçalves;
Lima, Idglan Sá;
Ribeiro, Alessandra Braga;
Lobo, Anderson O.;
Rizzo, Marcia S.;
Osajima, Josy Anteveli;
Estevinho, Leticia Miranda;
Silva-Filho, Edson C.

Publication type:

Article

Concrete-Based and Mixed Waste Aggregates in Rendering Mortars.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1976, doi. 10.3390/ma13081976

By:

Roque, Samuel;
Maia Pederneiras, Cinthia;
Brazão Farinha, Catarina;
de Brito, Jorge;
Veiga, Rosário

Publication type:

Article

Homogeneous Distribution of Polymerizable Coumarin Dyes for Active Few Mode POF †.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1975, doi. 10.3390/ma13081975

By:

Jakobs, Florian;
Harms, Kristoffer;
Kielhorn, Jana;
Zaremba, Daniel;
Ang, Pen Yiao;
Kowalsky, Wolfgang;
Johannes, Hans-Hermann

Publication type:

Article

Hierarchical Composite Meshes of Electrospun PS Microfibers with PA6 Nanofibers for Regenerative Medicine.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1974, doi. 10.3390/ma13081974

By:

Krysiak, Zuzanna J.;
Gawlik, Małgorzata Z.;
Knapczyk-Korczak, Joanna;
Kaniuk, Łukasz;
Stachewicz, Urszula

Publication type:

Article

Dynamic Stiffness of Bituminous Mixtures for the Wearing Course of the Road Pavement—A Proposed Method of Measurement.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1973, doi. 10.3390/ma13081973

By:

Czech, Krzysztof Robert;
Gardziejczyk, Wladyslaw

Publication type:

Article

Utilization of Fluidized Bed Combustion Fly Ash in the Design of Reuse Clay Soil in the Form of Self-Compacting Grouts.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1972, doi. 10.3390/ma13081972

By:

Drochytka, Rostislav;
Michalčíková, Magdaléna

Publication type:

Article

A Study for Improving Compressive Strength of Cementitious Mortar Utilizing Magnetic Water.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1971, doi. 10.3390/ma13081971

By:

Yousry, Omar M. M.;
Abdallah, Metwally A.;
Ghazy, Mariam F.;
Taman, Mohamed H.;
Kaloop, Mosbeh R.

Publication type:

Article

Molar Ratio Effect of Sodium to Chloride Ions on the Electrochemical Corrosion of Alloy 600 and SA508 in HCl + NaOH Mixtures.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1970, doi. 10.3390/ma13081970

By:

Hur, Do Haeng;
Han, Jeoh;
Choi, Jun

Publication type:

Article

Accelerated Life Testing of a Palladium-Doped Tin Oxide Electrode for Zn Electrowinning.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1969, doi. 10.3390/ma13081969

By:

Park, Jung Eun;
Kim, Ho;
Lee, Eun Sil

Publication type:

Article

Dielectric Properties of Glass Beads with Talc as a Reference Material for Calibration and Verification of Dielectric Methods and Devices for Measuring Soil Moisture.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1968, doi. 10.3390/ma13081968

By:

Szerement, Justyna;
Saito, Hironobu;
Furuhata, Kahori;
Yagihara, Shin;
Szypłowska, Agnieszka;
Lewandowski, Arkadiusz;
Kafarski, Marcin;
Wilczek, Andrzej;
Majcher, Jacek;
Woszczyk, Aleksandra;
Skierucha, Wojciech

Publication type:

Article

Effects of Surface Treatments of Glass Fiber-Reinforced Post on Bond Strength to Root Dentine: A Systematic Review.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1967, doi. 10.3390/ma13081967

By:

Mishra, Lora;
Khan, Abdul Samad;
Velo, Marilia Mattar de Amoedo Campos;
Panda, Saurav;
Zavattini, Angelo;
Rizzante, Fabio Antonio Piola;
Arbildo Vega, Heber Isac;
Sauro, Salvatore;
Lukomska-Szymanska, Monika

Publication type:

Article

Effects of Cryopreservation on Cell Metabolic Activity and Function of Biofabricated Structures Laden with Osteoblasts.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1966, doi. 10.3390/ma13081966

By:

Hernández-Tapia, Laura G.;
Fohlerová, Zdenka;
Žídek, Jan;
Alvarez-Perez, Marco A.;
Čelko, Ladislav;
Kaiser, Jozef;
Montufar, Edgar B.

Publication type:

Article

Study of Drilling Process by Cooling Compressed Air in Reinforced Polyether-Ether-Ketone.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1965, doi. 10.3390/ma13081965

By:

Domingo, Rosario;
de Agustina, Beatriz;
Marín, Marta María

Publication type:

Article

Ceramic Materials and Technologies Applied to Digital Works in Implant-Supported Restorative Dentistry.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1964, doi. 10.3390/ma13081964

By:

Pyo, Se-Wook;
Kim, Dae-Joon;
Han, Jung-Suk;
Yeo, In-Sung Luke

Publication type:

Article

Effect of Reconstruction Algorithm on the Identification of 3D Printing Polymers Based on Hyperspectral CT Technology Combined with Artificial Neural Network.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1963, doi. 10.3390/ma13081963

By:

Fang, Zheng;
Wang, Renbin;
Wang, Mengyi;
Zhong, Shuo;
Ding, Liquan;
Chen, Siyuan

Publication type:

Article

Acoustic Properties of Resonant Spruce Wood Modified Using Oil-Heat Treatment (OHT).

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1962, doi. 10.3390/ma13081962

By:

Mania, Przemysław;
Gąsiorek, Mateusz

Publication type:

Article

Developing and Comparing 2,6-Anthracene Derivatives: Optical, Electrochemical, Thermal, and Their Use in Organic Thin Film Transistors.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1961, doi. 10.3390/ma13081961

By:

Vorona, Mikhail Y.;
Yutronkie, Nathan J.;
Melville, Owen A.;
Daszczynski, Andrew J.;
Ovens, Jeffrey S.;
Brusso, Jaclyn L.;
Lessard, Benoît H.

Publication type:

Article

Improving the Tribological Properties and Biocompatibility of Zr-Based Bulk Metallic Glass for Potential Biomedical Applications.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1960, doi. 10.3390/ma13081960

By:

Sawyer, Victoria;
Tao, Xiao;
Dong, Huan;
Dashtbozorg, Behnam;
Li, Xiaoying;
Sammons, Rachel;
Dong, Han-Shan

Publication type:

Article

A Three-Point Hyperbolic Combination Model for the Settlement Prediction of Subgrade Filled with Construction and Demolition Waste.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1959, doi. 10.3390/ma13081959

By:

Wang, Haiying;
She, Hui;
Xu, Jian;
Liang, Linhao

Publication type:

Article

Improving Radiation Resistance of GaInP/GaInAs/Ge Triple-Junction Solar Cells Using GaInP Back-Surface Field in the Middle Subcell.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1958, doi. 10.3390/ma13081958

By:

Gao, Hui;
Yang, Ruixia;
Zhang, Yonghui

Publication type:

Article

Rotary Friction Welding of Molybdenum without Upset Forging.

Published in:

Materials (1996-1944), 2020, v. 13, n. 8, p. 1957, doi. 10.3390/ma13081957

By:

Xie, Miaoxia;
Shang, Xiangtao;
Li, Yanxin;
Zhang, Zehui;
Zhu, Minghui;
Xiong, Jiangtao

Publication type:

Article