Works matching IS 19961944 AND DT 2020 AND VI 13 AND IP 24

Results: 254

Impact of Pyrolysis Temperature on the Properties of Eucalyptus Wood-Derived Biochar.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5841, doi. 10.3390/ma13245841

By:

Chaves Fernandes, Bruno Caio;
Ferreira Mendes, Kassio;
Dias Júnior, Ananias Francisco;
da Silva Caldeira, Vinícius Patrício;
da Silva Teófilo, Taliane Maria;
Severo Silva, Tatiane;
Mendonça, Vander;
de Freitas Souza, Matheus;
Valadão Silva, Daniel

Publication type:

Article

Alpha Spectrometry of Radon Short-Lived Progeny in Drinking Water and Assessment of the Public Effective Dose: Results from the Cilento Area, Province of Salerno, Southern Italy.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5840, doi. 10.3390/ma13245840

By:

Faella, Enver;
Mancini, Simona;
Guida, Michele;
Cuomo, Albina;
Guida, Domenico

Publication type:

Article

Tensile and Shear Testing of Basalt Fiber Reinforced Polymer (BFRP) and Hybrid Basalt/Carbon Fiber Reinforced Polymer (HFRP) Bars.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5839, doi. 10.3390/ma13245839

By:

Protchenko, Kostiantyn;
Zayoud, Fares;
Urbański, Marek;
Szmigiera, Elżbieta

Publication type:

Article

Rapid Preparation of MWCNTs/Epoxy Resin Nanocomposites by Photoinduced Frontal Polymerization.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5838, doi. 10.3390/ma13245838

By:

Hu, Guofeng;
Fu, Wanli;
Ma, Yumin;
Zhou, Jianping;
Liang, Hongbo;
Kang, Xinmei;
Qi, Xiaolin

Publication type:

Article

Numerical and Experimental Results on Charpy Tests for Blends Polypropylene + Polyamide + Ethylene Propylene Diene Monomer (PP + PA + EPDM).

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5837, doi. 10.3390/ma13245837

By:

Pîrvu, Cătălin;
Musteată, Andreea Elena;
Ojoc, George Ghiocel;
Deleanu, Lorena

Publication type:

Article

Effect of Phenolic Resin on the Rheological and Morphological Characteristics of Styrene-Butadiene Rubber-Modified Asphalt.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5836, doi. 10.3390/ma13245836

By:

Cheng, Peifeng;
Li, Yiming;
Zhang, Zhanming

Publication type:

Article

Analysis and Modeling of the Micro-Cutting Process of Ti-6Al-4V Titanium Alloy with Single Abrasive Grain.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5835, doi. 10.3390/ma13245835

By:

Rypina, Łukasz;
Lipiński, Dariusz;
Bałasz, Błażej;
Kacalak, Wojciech;
Szatkiewicz, Tomasz

Publication type:

Article

Polycrystal Simulation of Texture-Induced Grain Coarsening during Severe Plastic Deformation.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5834, doi. 10.3390/ma13245834

By:

Zhang, Chi;
Toth, Laszlo S.

Publication type:

Article

Effect of Natural Graphite Fineness on the Performance and Electrical Conductivity of Cement Paste Mixes for Self-Sensing Structures.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5833, doi. 10.3390/ma13245833

By:

Papanikolaou, Ioanna;
Litina, Chrysoula;
Zomorodian, Amir;
Al-Tabbaa, Abir

Publication type:

Article

Thermoplastic Composites and Their Promising Applications in Joining and Repair Composites Structures: A Review.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5832, doi. 10.3390/ma13245832

By:

Reis, João Pedro;
de Moura, Marcelo;
Samborski, Sylwester

Publication type:

Article

Low-Cost Sensors for Determining the Variation in Interior Moisture Content in Gypsum Composite Materials.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5831, doi. 10.3390/ma13245831

By:

Ferrández, Daniel;
Morón, Carlos;
Saiz, Pablo;
Atanes-Sánchez, Evangelina;
Yedra, Engerst

Publication type:

Article

Enhancing Superconductivity of the Nonmagnetic Quasiskutterudites by Atomic Disorder.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5830, doi. 10.3390/ma13245830

By:

Ślebarski, Andrzej;
Maśka, Maciej M.

Publication type:

Article

Engineering of TeO 2 -ZnO-BaO-Based Glasses for Mid-Infrared Transmitting Optics.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5829, doi. 10.3390/ma13245829

By:

Linganna, Kadathala;
In, Jung-Hwan;
Kim, Seon Hoon;
Han, Karam;
Choi, Ju Hyeon

Publication type:

Article

Compressive Behavior of (Cu 0.47 Zr 0.45 Al 0.08) 98 Dy 2 Bulk Metallic Glass at Different Strain Rates.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5828, doi. 10.3390/ma13245828

By:

Wang, Yu-Ting;
Zu, Xu-Dong;
Liu, Xiang-Kui;
Huang, Zheng-Xiang;
Jin, Peng-Gang;
Kong, Jian

Publication type:

Article

The Effect of Steel and Polypropylene Fibers on the Properties of Horizontally Formed Concrete.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5827, doi. 10.3390/ma13245827

By:

Chajec, Adrian;
Sadowski, Łukasz

Publication type:

Article

Effects of the Processing Parameters of Friction Stir Processing on the Microstructure, Hardness and Tribological Properties of SnSbCu Bearing Alloy.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5826, doi. 10.3390/ma13245826

By:

Leszczyńska-Madej, Beata;
Madej, Marcin;
Hrabia-Wiśnios, Joanna;
Węglowska, Aleksandra

Publication type:

Article

Experimental Study on Influence of Curing Time on Strength Behavior of SLA-Printed Samples Loaded with Different Strain Rates.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5825, doi. 10.3390/ma13245825

By:

Miedzińska, Danuta;
Gieleta, Roman;
Popławski, Arkadiusz

Publication type:

Article

The Surface Condition of Ni-Cr after SiC Abrasive Blasting for Applications in Ceramic Restorations.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5824, doi. 10.3390/ma13245824

By:

Czepułkowska-Pawlak, Weronika;
Wołowiec-Korecka, Emilia;
Klimek, Leszek

Publication type:

Article

Shaping and Centering Ability, Cyclic Fatigue Resistance and Fractographic Analysis of Three Thermally Treated NiTi Endodontic Instrument Systems.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5823, doi. 10.3390/ma13245823

By:

Drukteinis, Saulius;
Peciuliene, Vytaute;
Bendinskaite, Ruta;
Brukiene, Vilma;
Maneliene, Rasmute;
Rutkunas, Vygandas

Publication type:

Article

Dielectric Response and Structural Analysis of (A 3+ , Nb 5+) Cosubstituted CaCu 3 Ti 4 O 12 Ceramics (A: Al and Bi).

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5822, doi. 10.3390/ma13245822

By:

Kotb, Hicham Mahfoz;
Ahmad, Mohamad M.;
Alshoaibi, Adil;
Yamada, Koji

Publication type:

Article

Mechanical Properties of Brass under Impact and Perforation Tests for a Wide Range of Temperatures: Experimental and Numerical Approach.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5821, doi. 10.3390/ma13245821

By:

Klosak, Maciej;
Jankowiak, Tomasz;
Rusinek, Alexis;
Bendarma, Amine;
Sielicki, Piotr W.;
Lodygowski, Tomasz

Publication type:

Article

Special Issue "Advanced Composites: From Materials Characterization to Structural Application".

Published in:

2020

By:

Gribniak, Viktor

Publication type:

Editorial

Numerical and Metallurgical Analysis of Laser Welded, Sealed Lap Joints of S355J2 and 316L Steels under Different Configurations.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5819, doi. 10.3390/ma13245819

By:

Danielewski, Hubert;
Skrzypczyk, Andrzej;
Hebda, Marek;
Tofil, Szymon;
Witkowski, Grzegorz;
Długosz, Piotr;
Nigrovič, Rastislav

Publication type:

Article

The Friction-Induced Vibration of Water-Lubricated Rubber Bearings during the Shutdown Process.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5818, doi. 10.3390/ma13245818

By:

Zhou, Guangwu;
Li, Peng;
Liao, Daxin;
Zhang, Yuhao;
Zhong, Ping

Publication type:

Article

Effect of Hot Deformation on Phase Transformation Kinetics in Isothermally Annealed 3Mn-1.6Al Steel.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5817, doi. 10.3390/ma13245817

By:

Skowronek, Adam;
Morawiec, Mateusz;
Kozłowska, Aleksandra;
Pakieła, Wojciech

Publication type:

Article

Operational Modal Analysis, Testing and Modelling of Prefabricated Steel Modules with Different LSF Composite Walls.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5816, doi. 10.3390/ma13245816

By:

Rashidi, Maria;
Sharafi, Pejman;
Alembagheri, Mohammad;
Bigdeli, Ali;
Samali, Bijan

Publication type:

Article

EMG Characterization and Processing in Production Engineering.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5815, doi. 10.3390/ma13245815

By:

Olmo, Manuel del;
Domingo, Rosario

Publication type:

Article

The Influence of HEMC on Cement and Cement-Lime Composites Setting Processes.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5814, doi. 10.3390/ma13245814

By:

Spychał, Edyta;
Czapik, Przemysław

Publication type:

Article

Evaluation of the In Vitro Cytotoxic Activity of Caffeic Acid Derivatives and Liposomal Formulation against Pancreatic Cancer Cell Lines.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5813, doi. 10.3390/ma13245813

By:

Zaremba-Czogalla, Magdalena;
Jaromin, Anna;
Sidoryk, Katarzyna;
Zagórska, Agnieszka;
Cybulski, Marcin;
Gubernator, Jerzy

Publication type:

Article

Ecological Cutting Fluids.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5812, doi. 10.3390/ma13245812

By:

Sułek, Marian Włodzimierz;
Bąk-Sowińska, Anna;
Przepiórka, Jacek

Publication type:

Article

Identification of Phenolic Compounds and Determination of Antioxidant Activity in Extracts and Infusions of Salvia Leaves.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5811, doi. 10.3390/ma13245811

By:

Francik, Sławomir;
Francik, Renata;
Sadowska, Urszula;
Bystrowska, Beata;
Zawiślak, Agnieszka;
Knapczyk, Adrian;
Nzeyimana, Abdul

Publication type:

Article

Experimental Analysis of Tribological Processes in Friction Pairs with Laser Borided Elements Lubricated with Engine Oils.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5810, doi. 10.3390/ma13245810

By:

Lubas, Janusz;
Szczypiński-Sala, Wojciech;
Woś, Paweł;
Zielińska, Edyta;
Miernik, Krzysztof

Publication type:

Article

Characterization of Electrical Traps Formed in Al 2 O 3 under Various ALD Conditions.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5809, doi. 10.3390/ma13245809

By:

Rahman, Md. Mamunur;
Shin, Ki-Yong;
Kim, Tae-Woo

Publication type:

Article

Effects of Graphene Nanoplates on the Mechanical Behavior and Strengthening Mechanism of 7075Al Alloy.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5808, doi. 10.3390/ma13245808

By:

Leng, Jinfeng;
Dong, Yunfan;
Ren, Binghui;
Wang, Ran;
Teng, Xinying

Publication type:

Article

Investigation of Energy Absorbed by Composite Panels with Honeycomb Aluminum Alloy Core.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5807, doi. 10.3390/ma13245807

By:

Mogilski, Maciej;
Jabłoński, Maciej;
Deroszewska, Martyna;
Saraczyn, Robert;
Tracz, Jan;
Kowalik, Michał;
Rządkowski, Witold

Publication type:

Article

Biomechanical Design and Prototyping of a Powered Ankle-Foot Prosthesis.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5806, doi. 10.3390/ma13245806

By:

Alleva, Stefano;
Antonelli, Michele Gabrio;
Beomonte Zobel, Pierluigi;
Durante, Francesco

Publication type:

Article

Performance Comparison of Advanced Ceramic Cladding Approaches via Solid-State and Traditional Welding Processes: A Review.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5805, doi. 10.3390/ma13245805

By:

Selvaraj, Senthil Kumaran;
Srinivasan, Kathiravan;
Deshmukh, Jainendra;
Agrawal, Darshit;
Mungilwar, Sailam;
Jagtap, Rucha;
Hu, Yuh-Chung

Publication type:

Article

Shear Performance of Reinforced Concrete Beams with Small Circular Openings Strengthened Using Rectangular and Octagonal-Shaped Reinforcement.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5804, doi. 10.3390/ma13245804

By:

Kim, Hyeong-Gook;
Lee, Jung-Yoon;
Kim, Kil-Hee

Publication type:

Article

Superplastic Deformation of Al–Cu Alloys after Grain Refinement by Extrusion Combined with Reversible Torsion.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5803, doi. 10.3390/ma13245803

By:

Rodak, Kinga;
Kuc, Dariusz;
Mikuszewski, Tomasz

Publication type:

Article

Organic Contaminant-Triggered Self-Healing Soil Mix Cut-Off Wall Materials Incorporating Oil Sorbents.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5802, doi. 10.3390/ma13245802

By:

Cao, Benyi;
de Souza, Livia Ribeiro;
Al-Tabbaa, Abir

Publication type:

Article

Post-Weld Heat Treatment of API 5L X70 High Strength Low Alloy Steel Welds.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5801, doi. 10.3390/ma13245801

By:

Alipooramirabad, Houman;
Paradowska, Anna;
Nafisi, Shahrooz;
Reid, Mark;
Ghomashchi, Reza

Publication type:

Article

The Effects of Temperature Curing on the Strength Development, Transport Properties, and Freeze-Thaw Resistance of Blast Furnace Slag Cement Mortars Modified with Nanosilica.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5800, doi. 10.3390/ma13245800

By:

Federowicz, Karol;
Figueiredo, Vitoria Alves;
Al-kroom, Hussein;
Abdel-Gawwad, Hamdy A.;
Abd Elrahman, Mohamed;
Sikora, Pawel

Publication type:

Article

Numerical Analysis of the Heating Characteristics of Magnetic Oscillation Arc and the Fluid Flow in Molten Pool in Narrow Gap Gas Tungsten Arc Welding.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5799, doi. 10.3390/ma13245799

By:

Jian, Xiaoxia;
Yang, Xing;
Li, Jingqian;
Wang, Weihua;
Wu, Hebao

Publication type:

Article

Spinel-Type (FeCoCrMnZn) 3 O 4 High-Entropy Oxide: Facile Preparation and Supercapacitor Performance.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5798, doi. 10.3390/ma13245798

By:

Liang, Bingliang;
Ai, Yunlong;
Wang, Yiliang;
Liu, Changhong;
Ouyang, Sheng;
Liu, Meijiao

Publication type:

Article

Tribological Properties of Ni-P/Si 3 N 4 Nanocomposite Layers Deposited by Chemical Reduction Method on Aluminum Alloy AW-7075.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5797, doi. 10.3390/ma13245797

By:

Czapczyk, Kazimierz

Publication type:

Article

The Role of Observation–Measurement Methods in the Surface Characterization of X39Cr13 Stainless-Steel Cutting Blades Used in the Fish Processing Industry.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5796, doi. 10.3390/ma13245796

By:

Kapłonek, Wojciech;
Nadolny, Krzysztof;
Zieliński, Bartosz;
Plichta, Jarosław;
Pimenov, Danil Yurievich;
Sharma, Shubham

Publication type:

Article

Influence of the Interlayer Temperature on Structure and Properties of Wire and Arc Additive Manufactured Duplex Stainless Steel Product.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5795, doi. 10.3390/ma13245795

By:

Knezović, Nikola;
Garašić, Ivica;
Jurić, Ivan

Publication type:

Article

An In Situ Reflectance Spectroscopic Investigation to Monitor Two-Dimensional MoS 2 Flakes on a Sapphire Substrate.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5794, doi. 10.3390/ma13245794

By:

Wang, Yina;
Zhang, Lei;
Yang, Wen;
Lv, Shanshan;
Su, Chenhui;
Xiao, Hang;
Zhang, Faye;
Sui, Qingmei;
Jia, Lei;
Jiang, Mingshun

Publication type:

Article

Experimental Investigation of Methyl Methacrylate in Stirred Batch Emulsion Reactor: AGET ATRP Approach.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5793, doi. 10.3390/ma13245793

By:

Awad, Mohammed;
Duever, Thomas;
Dhib, Ramdhane

Publication type:

Article

3D Numerical Study of External Axial Magnetic Field-Controlled High-Current GMAW Metal Transfer Behavior.

Published in:

Materials (1996-1944), 2020, v. 13, n. 24, p. 5792, doi. 10.3390/ma13245792

By:

Xiao, Lei;
Fan, Ding;
Huang, Jiankang;
Tashiro, Shinichi;
Tanaka, Manabu

Publication type:

Article