Works matching IS 19961944 AND DT 2020 AND VI 13 AND IP 20
Results: 226
Effect of the Drying Method of Pine and Beech Wood on Fracture Toughness and Shear Yield Stress.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4692, doi. 10.3390/ma13204692
- By:
- Publication type:
- Article
Data Merging of AE Sensors with Different Frequency Resolution for the Detection and Identification of Damage in Oxide-Based Ceramic Matrix Composites.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4691, doi. 10.3390/ma13204691
- By:
- Publication type:
- Article
Morphological, Chemical, and Biological Investigation of Ionic Substituted, Pulse Current Deposited Calcium Phosphate Coatings.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4690, doi. 10.3390/ma13204690
- By:
- Publication type:
- Article
Metal Nanoparticles Formation from Nickel Hydroxide.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4689, doi. 10.3390/ma13204689
- By:
- Publication type:
- Article
Treatment of Osseous Defects after Mandibular Third Molar Removal with a Resorbable Alloplastic Grafting Material: A Case Series with 1- to 2-Year Follow-Up.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4688, doi. 10.3390/ma13204688
- By:
- Publication type:
- Article
Effect of Yttrium and Rhenium Ion Implantation on the Performance of Nitride Ceramic Cutting Tools.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4687, doi. 10.3390/ma13204687
- By:
- Publication type:
- Article
The Effects of Hybridisation of Composites Consisting of Aramid, Carbon, and Hemp Fibres in a Quasi-Static Penetration Test.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4686, doi. 10.3390/ma13204686
- By:
- Publication type:
- Article
Mitigating Portland Cement CO 2 Emissions Using Alkali-Activated Materials: System Dynamics Model.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4685, doi. 10.3390/ma13204685
- By:
- Publication type:
- Article
Influence of Vinyl Polysiloxane Impression Techniques on Marginal Fit of Metal Frameworks for Fixed Partial Dentures.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4684, doi. 10.3390/ma13204684
- By:
- Publication type:
- Article
On the Impact of Substrate Uniform Mechanical Tension on the Graphene Electronic Structure.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4683, doi. 10.3390/ma13204683
- By:
- Publication type:
- Article
Preliminary Study on the Capability of the Novel Near Solidus Forming (NSF) Technology to Manufacture Complex Steel Components.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4682, doi. 10.3390/ma13204682
- By:
- Publication type:
- Article
Tropisms of the Dowser Texture.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4681, doi. 10.3390/ma13204681
- By:
- Publication type:
- Article
Evaluation of the Milling Accuracy of Zirconia-Reinforced Lithium Silicate Crowns Fabricated Using the Dental Medical Device System: A Three-Dimensional Analysis.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4680, doi. 10.3390/ma13204680
- By:
- Publication type:
- Article
Simvastatin Induces In Vitro Mineralization Effects of Primary Human Odontoblast-Like Cells.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4679, doi. 10.3390/ma13204679
- By:
- Publication type:
- Article
Dry Rolling/Sliding Wear of Bainitic Rail Steels under Different Contact Stresses and Slip Ratios.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4678, doi. 10.3390/ma13204678
- By:
- Publication type:
- Article
Addressing H-Material Interaction in Fast Diffusion Materials—A Feasibility Study on a Complex Phase Steel.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4677, doi. 10.3390/ma13204677
- By:
- Publication type:
- Article
Large-Beam Picosecond Interference Patterning of Metallic Substrates.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4676, doi. 10.3390/ma13204676
- By:
- Publication type:
- Article
Experimental Determination of the Manson−Coffin Curves for an Original Unconventional Vehicle Frame.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4675, doi. 10.3390/ma13204675
- By:
- Publication type:
- Article
The Effect of the Addition of Polypropylene Fibers to Primer on the Pull-Off Strength of Epoxy Resin Coatings.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4674, doi. 10.3390/ma13204674
- By:
- Publication type:
- Article
Surface Activation of Polylactic Acid-Based Wood-Plastic Composite by Atmospheric Pressure Plasma Treatment.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4673, doi. 10.3390/ma13204673
- By:
- Publication type:
- Article
Imidazolium-Based Ionic Liquid as Efficient Corrosion Inhibitor for AA 6061 Alloy in HCl Solution.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4672, doi. 10.3390/ma13204672
- By:
- Publication type:
- Article
Fabrication and Characterisation of Aligned Discontinuous Carbon Fibre Reinforced Thermoplastics as Feedstock Material for Fused Filament Fabrication.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4671, doi. 10.3390/ma13204671
- By:
- Publication type:
- Article
Stribeck Curve of Magnetorheological Fluid within Pin-on-Disc Configuration: An Experimental Investigation.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4670, doi. 10.3390/ma13204670
- By:
- Publication type:
- Article
Ground Tire Rubber Modified by Ethylene-Vinyl Acetate Copolymer: Processing, Physico-Mechanical Properties, Volatile Organic Compounds Emission and Recycling Possibility.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4669, doi. 10.3390/ma13204669
- By:
- Publication type:
- Article
Special Issue: Mechanical Properties in Progressive Mechanically Processed Metallic Materials.
- Published in:
- 2020
- By:
- Publication type:
- Editorial
Effect of Rotation of the Principal Stress Axes Relative to the Material on the Evolution of Material Properties in Severe Plastic Deformation Processes.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4667, doi. 10.3390/ma13204667
- By:
- Publication type:
- Article
Wetting Kinetics and Microstructure Analysis of BNi2 Filler Metal over Selective Laser Melted Ti-6Al-4V Substrate.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4666, doi. 10.3390/ma13204666
- By:
- Publication type:
- Article
Surfactant Effects on the Synthesis of Redox Bifunctional V 2 O 5 Photocatalysts.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4665, doi. 10.3390/ma13204665
- By:
- Publication type:
- Article
Experimental Investigation on Machinability of Aluminum Alloy during Dry Micro Cutting Process Using Helical Micro End Mills with Micro Textures.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4664, doi. 10.3390/ma13204664
- By:
- Publication type:
- Article
Surface Piezoelectricity and Pyroelectricity in Centrosymmetric Materials: A Case of α-Glycine.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4663, doi. 10.3390/ma13204663
- By:
- Publication type:
- Article
Effects of Operational Parameters on the Low Contaminant Jarosite Precipitation Process-an Industrial Scale Study.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4662, doi. 10.3390/ma13204662
- By:
- Publication type:
- Article
Elucidation of the Hydration Reaction of UHPC Using the PONKCS Method.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4661, doi. 10.3390/ma13204661
- By:
- Publication type:
- Article
Synthesis and Characterization of Graphene–Silver Nanoparticle Hybrid Materials.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4660, doi. 10.3390/ma13204660
- By:
- Publication type:
- Article
Materials Selection and Construction Development for Ensuring the Availability and Durability of the Molten Hydroxide Electrolyte Direct Carbon Fuel Cell (MH-MCFC).
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4659, doi. 10.3390/ma13204659
- By:
- Publication type:
- Article
Chestnut-Derived Activated Carbon as a Prospective Material for Energy Storage.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4658, doi. 10.3390/ma13204658
- By:
- Publication type:
- Article
Analysis of the Rock Failure Cone Size Relative to the Group Effect from a Triangular Anchorage System.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4657, doi. 10.3390/ma13204657
- By:
- Publication type:
- Article
CO 2 Uptake and Physicochemical Properties of Carbonation-Cured Ternary Blend Portland Cement–Metakaolin–Limestone Pastes.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4656, doi. 10.3390/ma13204656
- By:
- Publication type:
- Article
Deep Red Tunability and Output Power Performances of Visible Laser Emission in a Pr:Ba(Y 1− x Lu x) 2 F 8 Single Crystal.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4655, doi. 10.3390/ma13204655
- By:
- Publication type:
- Article
Influence of Long-Period-Stacking Ordered Structure on the Damping Capacities and Mechanical Properties of Mg-Zn-Y-Mn As-Cast Alloys.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4654, doi. 10.3390/ma13204654
- By:
- Publication type:
- Article
Understanding the Role of Silver Nanostructures and Graphene Oxide Applied as Surface Modification of TiO 2 in Photocatalytic Transformations of Rhodamine B under UV and Vis Irradiation.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4653, doi. 10.3390/ma13204653
- By:
- Publication type:
- Article
Engineering Properties of Superconducting Materials.
- Published in:
- 2020
- By:
- Publication type:
- Editorial
Hot-Rolling and a Subsequent Direct-Quenching Process Enable Superior High-Cycle Fatigue Resistance in Ultra-High Strength Low Alloy Steels.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4651, doi. 10.3390/ma13204651
- By:
- Publication type:
- Article
The Activation of Ti-Zr-V-Hf Non-Evaporable Getter Films with Open-Cell Copper Metal Foam Substrates.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4650, doi. 10.3390/ma13204650
- By:
- Publication type:
- Article
Fabrication of Eco-Friendly Betanin Hybrid Materials Based on Palygorskite and Halloysite.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4649, doi. 10.3390/ma13204649
- By:
- Publication type:
- Article
Glass–Adhesive–Steel Joint Inspection Using Mechanic and High Frequency Electromagnetic Waves.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4648, doi. 10.3390/ma13204648
- By:
- Publication type:
- Article
Facile Synthesis of Nanoporous NiS Film with Inverse Opal Structure as Efficient Counter Electrode for DSSCs.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4647, doi. 10.3390/ma13204647
- By:
- Publication type:
- Article
The Influence of Ambient Temperature on High Performance Concrete Properties.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4646, doi. 10.3390/ma13204646
- By:
- Publication type:
- Article
Effect of Welding Speed and Post Quenching on the Microstructure and Mechanical Properties of Laser-Welded B1500HS Joints.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4645, doi. 10.3390/ma13204645
- By:
- Publication type:
- Article
Magnetic Iron Oxide Nanoparticle (IONP) Synthesis to Applications: Present and Future.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4644, doi. 10.3390/ma13204644
- By:
- Publication type:
- Article
Electron Backscattered Diffraction to Estimate Residual Stress Levels of a Superalloy Produced by Laser Powder Bed Fusion and Subsequent Heat Treatments.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 20, p. 4643, doi. 10.3390/ma13204643
- By:
- Publication type:
- Article