Works matching IS 19961944 AND DT 2016 AND VI 9 AND IP 7

Results: 111

Residual Tensile Property of Plain Woven Jute Fiber/Poly(Lactic Acid) Green Composites during Thermal Cycling.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 573, doi. 10.3390/ma9070573

By:

Hideaki Katogi;
Kenichi Takemura;
Motoki Akiyama

Publication type:

Article

Change in Dielectric Properties in the Microwave Frequency Region of Polypyrrole–Coated Textiles during Aging.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 609, doi. 10.3390/ma9070609

By:

Hakansson, Eva;
Kaynak, Akif;
Kouzani, Abbas

Publication type:

Article

Design and Fabrication of a Precision Template for Spine Surgery Using Selective Laser Melting (SLM).

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 608, doi. 10.3390/ma9070608

By:

Di Wang;
Yimeng Wang;
Jianhua Wang;
Changhui Song;
Yongqiang Yang;
Zimian Zhang;
Hui Lin;
Yongqiang Zhen;
Suixiang Liao

Publication type:

Article

Physico-Chemical Alternatives in Lignocellulosic Materials in Relation to the Kind of Component for Fermenting Purposes.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 574, doi. 10.3390/ma9070574

By:

Coz, Alberto;
Llano, Tamara;
Cifrián, Eva;
Viguri, Javier;
Maican, Edmond;
Sixta, Herbert

Publication type:

Article

Influence of Network Structure on Glass Transition Temperature of Elastomers.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 607, doi. 10.3390/ma9070607

By:

Bandzierz, Katarzyna;
Reuvekamp, Louis;
Dryzek, Jerzy;
Dierkes, Wilma;
Blume, Anke;
Bielinski, Dariusz

Publication type:

Article

Transformation and Precipitation Reactions by Metal Active Gas Pulsed Welded Joints from X2CrNiMoN22-5-3 Duplex Stainless Steels.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 606, doi. 10.3390/ma9070606

By:

Utu, Ion-Dragos;
Mitelea, Ion;
Urlan, Sorin Dumitru;
Crăciunescu, Corneliu Marius

Publication type:

Article

Pickering Emulsion-Based Marbles for Cellular Capsules.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 572, doi. 10.3390/ma9070572

By:

Guangzhao Zhang;
Chaoyang Wang

Publication type:

Article

Hydration of Hybrid Alkaline Cement Containing a Very Large Proportion of Fly Ash: A Descriptive Model.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 605, doi. 10.3390/ma9070605

By:

Garcia-Lodeiro, Inés;
Donatello, Shane;
Fernández-Jiménez, Ana;
Palomo, Ángel

Publication type:

Article

An Experimental Study on Micro Clinching of Metal Foils with Cutting by Laser Shock Forming.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 571, doi. 10.3390/ma9070571

By:

Xiao Wang;
Cong Li;
Youjuan Ma;
Zongbao Shen;
Xianqing Sun;
Chaofei Sha;
Shuai Gao;
Liyin Li;
Huixia Liu

Publication type:

Article

Crystal Structures and Mechanical Properties of Ca2C at High Pressure.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 1, doi. 10.3390/ma9070570

By:

Qun Wei;
Quan Zhang;
Meiguang Zhang

Publication type:

Article

Stereocomplexation in Copolymer Networks Incorporating Enantiomeric Glycerol-Based 3-Armed Lactide Oligomers and a 2-Armed ε-Caprolactone Oligomer.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 591, doi. 10.3390/ma9070591

By:

Ayaka Shibita;
Seina Kawasaki;
Toshiaki Shimasaki;
Naozumi Teramoto;
Mitsuhiro Shibata

Publication type:

Article

Influence of Growth Rate and Magnetic Field on Microstructure and Properties of Directionally Solidified Ag-Cu Eutectic Alloy.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 569, doi. 10.3390/ma9070569

By:

Xiaowei Zuo;
Congcong Zhao;
Lin Zhang;
Engang Wang

Publication type:

Article

Rotation Disk Process to Assess the Influence of Metals and Voltage on the Growth of Biofilm.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 568, doi. 10.3390/ma9070568

By:

Barry, Dana M.;
McGrath, Paul B.

Publication type:

Article

Microscale Simulation on Mechanical Properties of Al/PTFE Composite Based on Real Microstructures.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 590, doi. 10.3390/ma9070590

By:

Chao Ge;
Yongxiang Dong;
Wubuliaisan Maimaitituersun

Publication type:

Article

Modelling and Microstructural Characterization of Sintered Metallic Porous Materials.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 567, doi. 10.3390/ma9070567

By:

Depczynski, Wojciech;
Kazala, Robert;
Ludwinek, Krzysztof;
Jedynak, Katarzyna

Publication type:

Article

In Situ Thermal Generation of Silver Nanoparticles in 3D Printed Polymeric Structures.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 589, doi. 10.3390/ma9070589

By:

Fantino, Erika;
Chiappone, Annalisa;
Calignano, Flaviana;
Fontana, Marco;
Pirri, Fabrizio;
Roppolo, Ignazio

Publication type:

Article

Cationic Site-Preference in the Yb14-xCaxAlSb11 (4.81 ≤ x ≤ 10.57) Series: Theoretical and Experimental Studies.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 553, doi. 10.3390/ma9070553

By:

Gnu Nam;
Eunyoung Jang;
Hongil Jo;
Mi-Kyung Han;
Sung-Jin Kim;
Kang Min Ok;
Tae-Soo You

Publication type:

Article

A Review of Natural Joint Systems and Numerical Investigation of Bio-Inspired GFRP-to-Steel Joints.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 566, doi. 10.3390/ma9070566

By:

Avgoulas, Evangelos I.;
Sutcliffe, Michael P. F.

Publication type:

Article

The First 20 Hours of Geopolymerization: An in Situ WAXS Study of Flyash-Based Geopolymers.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 552, doi. 10.3390/ma9070552

By:

Williams, Ross P.;
Riessen, Arie van

Publication type:

Article

Acoustic Performance of Resilient Materials Using Acrylic Polymer Emulsion Resin.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 592, doi. 10.3390/ma9070592

By:

Haseog Kim;
Sangki Park;
Seahyun Lee

Publication type:

Article

Thermal Stability and Flammability of Styrene-Butadiene Rubber-Based (SBR) Ceramifiable Composites.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 604, doi. 10.3390/ma9070604

By:

Anyszka, Rafał;
Bieliński, Dariusz M.;
Pędzich, Zbigniew;
Rybiński, Przemysław;
Imiela, Mateusz;
Siciński, Mariusz;
Zarzecka-Napierała, Magdalena;
Gozdek, Tomasz;
Rutkowski, Paweł

Publication type:

Article

Rapeseed and Raspberry Seed Cakes as Inexpensive Raw Materials in the Production of Activated Carbon by Physical Activation: Effect of Activation Conditions on Textural and Phenol Adsorption Characteristics.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 565, doi. 10.3390/ma9070565

By:

Smets, Koen;
De Jong, Mats;
Lupul, Iwona;
Gryglewicz, Grazyna;
Schreurs, Sonja;
Carleer, Robert;
Yperman, Jan

Publication type:

Article

The Resistive Switching Characteristics in ZrO2 and Its Filamentary Conduction Behavior.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 551, doi. 10.3390/ma9070551

By:

Chun-Hung Lai;
Hung-Wei Chen;
Chih-Yi Liu

Publication type:

Article

Fiberglass Grids as Sustainable Reinforcement of Historic Masonry.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 603, doi. 10.3390/ma9070603

By:

Righetti, Luca;
Edmondson, Vikki;
Corradi, Marco;
Borri, Antonio

Publication type:

Article

Bimetallic Nanoparticles as Efficient Catalysts: Facile and Green Microwave Synthesis.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 550, doi. 10.3390/ma9070550

By:

Blosi, Magda;
Ortelli, Simona;
Costa, Anna Luisa;
Dondi, Michele;
Lolli, Alice;
Andreoli, Sara;
Benito, Patricia;
Albonetti, Stefania

Publication type:

Article

Guided Wave Based Crack Detection in the Rivet Hole Using Global Analytical with Local FEM Approach.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 602, doi. 10.3390/ma9070602

By:

Bhuiyan, Md Yeasin;
Yanfeng Shen;
Giurgiutiu, Victor

Publication type:

Article

Characterizations of Rapid Sintered Nanosilver Joint for Attaching Power Chips.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 564, doi. 10.3390/ma9070564

By:

Shuang-Tao Feng;
Yun-Hui Mei;
Gang Chen;
Xin Li;
Guo-Quan Lu

Publication type:

Article

Novel Mg-Doped SrMoO3 Perovskites Designed as Anode Materials for Solid Oxide Fuel Cells.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 588, doi. 10.3390/ma9070588

By:

Cascos, Vanessa;
Alonso, José Antonio;
Fernández-Díaz, María Teresa

Publication type:

Article

Low Cost Local Contact Opening by Using Polystyrene Spheres Spin-Coating Method for PERC Solar Cells.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 549, doi. 10.3390/ma9070549

By:

Chia-Hsun Hsu;
Chih-Hsiang Yang;
Yi-Han Wang;
Chun-Wei Huang;
Shui-Yang Lien;
Chung-Yuan Kung;
Jen-Chung Lou

Publication type:

Article

LCA of 1,4-Butanediol Produced via Direct Fermentation of Sugars from Wheat Straw Feedstock within a Territorial Biorefinery.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 563, doi. 10.3390/ma9070563

By:

Forte, Annachiara;
Zucaro, Amalia;
Basosi, Riccardo;
Fierro, Angelo

Publication type:

Article

Effect of Transition Metal Substitution on the Structure and Properties of a Clathrate-Like Compound Eu7Cu44As23.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 587, doi. 10.3390/ma9070587

By:

Plokhikh, Igor V.;
Charkin, Dmitri O.;
Verchenko, Valeriy Yu.;
Ignatyev, Ivan A.;
Kazakov, Sergey M.;
Sobolev, Alexey V.;
Presniakov, Igor A.;
Tsirlin, Alexander A.;
Shevelkov, Andrei V.

Publication type:

Article

Gas Diffusion Electrodes Manufactured by Casting Evaluation as Air Cathodes for Microbial Fuel Cells (MFC).

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 601, doi. 10.3390/ma9070601

By:

Srikanth, Sandipam;
Pant, Deepak;
Dominguez-Benetton, Xochitl;
Genné, Inge;
Vanbroekhoven, Karolien;
Vermeiren, Philippe;
Alvarez-Gallego, Yolanda

Publication type:

Article

Preliminary Design and Experimental Investigation of a Novel Pneumatic Conveying Method to Disperse Natural Fibers in Thermoset Polymers.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 548, doi. 10.3390/ma9070548

By:

Fahimian, Mahi;
Kortschot, Mark;
Sain, Mohini

Publication type:

Article

Enrichment of Cellulosic Waste Hemp (Cannabis sativa) Hurd into Non-Toxic Microfibres.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 562, doi. 10.3390/ma9070562

By:

Abraham, Reinu E.;
Wong, Cynthia S.;
Puri, Munish

Publication type:

Article

Superplasticizer Addition to Carbon Fly Ash Geopolymers Activated at Room Temperature.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 586, doi. 10.3390/ma9070586

By:

Carabba, Lorenza;
Manzi, Stefania;
Bignozzi, Maria Chiara

Publication type:

Article

Investigation of the Self-Healing Behaviors of Microcapsules/Bitumen Composites by a Repetitive Direct Tension Test.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 1, doi. 10.3390/ma9070600

By:

Jun-Feng Su;
Peng Yang;
Ying-Yuan Wang;
Shan Han;
Ning-Xu Han;
Wei Li

Publication type:

Article

Repair Bond Strength of Aged Resin Composite after Different Surface and Bonding Treatments.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 547, doi. 10.3390/ma9070547

By:

Wendler, Michael;
Belli, Renan;
Panzer, Reinhard;
Skibbe, Daniel;
Petschelt, Anselm;
Lohbauer, Ulrich

Publication type:

Article

Structural Transitions in Nanosized Zn0.97Al0.03O Powders under High Pressure Analyzed by in Situ Angle-Dispersive X-ray Diffraction.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 561, doi. 10.3390/ma9070561

By:

Chih-Ming Lin;
Hsin-Tzu Liu;
Shi-Yao Zhong;
Chia-Hung Hsu;
Yi-Te Chiu;
Ming-Fong Tai;
Jenh-Yih Juang;
Yu-Chun Chuang;
Yen-Fa Liao

Publication type:

Article

Acid-Alkali Resistance of New Reclaimed Tiles Containing Sewage Sludge Ash and Waste Glass.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 546, doi. 10.3390/ma9070546

By:

Deng-Fong Lin;
Kuo-Liang Lin;
Huan-Lin Luo;
Jia-Qin Xu

Publication type:

Article

Biomineralization of Engineered Spider Silk Protein-Based Composite Materials for Bone Tissue Engineering.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 560, doi. 10.3390/ma9070560

By:

Hardy, John G.;
Torres-Rendon, Jose Guillermo;
Leal-Egaña, Aldo;
Walther, Andreas;
Schlaad, Helmut;
Cölfen, Helmut;
Scheibel, Thomas R.

Publication type:

Article

Tailoring the Dielectric Layer Structure for Enhanced Performance of Organic Field-Effect Transistors: The Use of a Sandwiched Polar Dielectric Layer.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 545, doi. 10.3390/ma9070545

By:

Shijiao Han;
Xin Yang;
Xinming Zhuang;
Junsheng Yu;
Lu Li

Publication type:

Article

Solvent-Induced Polymorphism of Iron(II) Spin Crossover Complexes.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 585, doi. 10.3390/ma9070585

By:

Šalitroš, Ivan;
Fuhr, Olaf;
Ruben, Mario

Publication type:

Article

Recent Developments in Antimicrobial Polymers: A Review.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 599, doi. 10.3390/ma9070599

By:

Santos, Madson R. E.;
Fonseca, Ana C.;
Mendonça, Patrícia V.;
Branco, Rita;
Serra, Arménio C.;
Morais, Paula V.;
Coelho, Jorge F. J.

Publication type:

Article

Anomalous Halo Formation in an Arc-Melted ScNi-Sc2Ni Off-Eutectic Binary Alloy.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 584, doi. 10.3390/ma9070584

By:

Kai Wang;
Ming Wei;
Lijun Zhang

Publication type:

Article

Investigation of Industrial Polyurethane Foams Modified with Antimicrobial Copper Nanoparticles.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 544, doi. 10.3390/ma9070544

By:

Sportelli, Maria Chiara;
Picca, Rosaria Anna;
Ronco, Roberto;
Bonerba, Elisabetta;
Tantillo, Giuseppina;
Pollini, Mauro;
Sannino, Alessandro;
Valentini, Antonio;
Cataldi, Tommaso R. I.;
Cioffi, Nicola

Publication type:

Article

UV-Assisted 3D Printing of Glass and Carbon Fiber-Reinforced Dual-Cure Polymer Composites.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 1, doi. 10.3390/ma9070583

By:

Invernizzi, Marta;
Natale, Gabriele;
Levi, Marinella;
Turri, Stefano;
Griffini, Gianmarco

Publication type:

Article

Electrochemical Study and Characterization of an Amperometric Biosensor Based on the Immobilization of Laccase in a Nanostructure of TiO2 Synthesized by the Sol-Gel Method.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 543, doi. 10.3390/ma9070543

By:

Romero-Arcos, Mariana;
Garnica-Romo, Ma. Guadalupe;
Martínez-Flores, Héctor Eduardo

Publication type:

Article

Preparation of a Carbon Doped Tissue-Mimicking Material with High Dielectric Properties for Microwave Imaging Application.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 559, doi. 10.3390/ma9070559

By:

Siang-Wen Lan;
Min-Hang Weng;
Ru-Yuan Yang;
Shoou-Jinn Chang;
Yaoh-Sien Chung;
Tsung-Chih Yu;
Chun-Sen Wu

Publication type:

Article

Adsorption of Heavy Metals by Graphene Oxide/Cellulose Hydrogel Prepared from NaOH/Urea Aqueous Solution.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 582, doi. 10.3390/ma9070582

By:

Xiong Chen;
Sukun Zhou;
Liming Zhang;
Tingting You;
Feng Xu

Publication type:

Article

Benefits of Sealed-Curing on Compressive Strength of Fly Ash-Based Geopolymers.

Published in:

Materials (1996-1944), 2016, v. 9, n. 7, p. 598, doi. 10.3390/ma9070598

By:

Sujeong Lee;
Riessen, Arie van;
Chul-Min Chon

Publication type:

Article