Works matching IS 19718993 AND DT 2024
Results: 85
Mechanical evaluation of recycled PETG filament for 3D printing.
- Published in:
- Fracture & Structural Integrity, 2024, n. 70, p. 310, doi. 10.3221/IGF-ESIS.70.18
- By:
- Publication type:
- Article
Rubberized reinforced concrete columns under axial and cyclic loading.
- Published in:
- Fracture & Structural Integrity, 2024, n. 70, p. 286, doi. 10.3221/IGF-ESIS.70.17
- By:
- Publication type:
- Article
Self-similarity of damage-failure transition and the power laws of fatigue crack advance.
- Published in:
- Fracture & Structural Integrity, 2024, n. 70, p. 272, doi. 10.3221/IGF-ESIS.70.16
- By:
- Publication type:
- Article
Exploring the elastocaloric effect of Shape Memory Alloys for innovative biomedical devices: a review.
- Published in:
- Fracture & Structural Integrity, 2024, n. 70, p. 257, doi. 10.3221/IGF-ESIS.70.15
- By:
- Publication type:
- Article
Tool wear evaluation of self-propelled rotary tool and conventional round tool during turning Inconel 718.
- Published in:
- Fracture & Structural Integrity, 2024, n. 70, p. 242, doi. 10.3221/IGF-ESIS.70.14
- By:
- Publication type:
- Article
Optimization of the internal structure of 3D-printed components for architectural restoration.
- Published in:
- Fracture & Structural Integrity, 2024, n. 70, p. 227, doi. 10.3221/IGF-ESIS.70.13
- By:
- Publication type:
- Article
An interface-based microscopic model for the failure analysis of masonry structures reinforced with timber retrofit solutions.
- Published in:
- Fracture & Structural Integrity, 2024, n. 70, p. 210, doi. 10.3221/IGF-ESIS.70.12
- By:
- Publication type:
- Article
Elastic-viscoplastic deformation models of salt rocks.
- Published in:
- Fracture & Structural Integrity, 2024, n. 70, p. 192, doi. 10.3221/IGF-ESIS.70.11
- By:
- Publication type:
- Article
Enhancing generalizability of a machine learning model for infrared thermographic defect detection by using 3d numerical modeling.
- Published in:
- Fracture & Structural Integrity, 2024, n. 70, p. 177, doi. 10.3221/IGF-ESIS.70.10
- By:
- Publication type:
- Article
Effect of printing process parameters on tensile strength and wear rate of 17-4PH stainless steel deposited using SLM process.
- Published in:
- Fracture & Structural Integrity, 2024, n. 70, p. 157, doi. 10.3221/IGF-ESIS.70.09
- By:
- Publication type:
- Article
ANSYS implementation of the phase field fracture approach.
- Published in:
- Fracture & Structural Integrity, 2024, n. 70, p. 133, doi. 10.3221/IGF-ESIS.70.08
- By:
- Publication type:
- Article
Application of deep learning for technological parameter optimization of laser shock peening of Ti-6Al-4V alloy.
- Published in:
- Fracture & Structural Integrity, 2024, n. 70, p. 121, doi. 10.3221/IGF-ESIS.70.07
- By:
- Publication type:
- Article
Numerical study of the influence of the parameters of statistical distribution of the structural elements' ultimate strength on deformable bodies' fracture processes.
- Published in:
- Fracture & Structural Integrity, 2024, n. 70, p. 105, doi. 10.3221/IGF-ESIS.70.06
- By:
- Publication type:
- Article
Impact of hybrid nanoparticle reinforcements on mechanical properties of Epoxy-Polylactic Acid (PLA) Composites.
- Published in:
- Fracture & Structural Integrity, 2024, n. 70, p. 91, doi. 10.3221/IGF-ESIS.70.05
- By:
- Publication type:
- Article
Modeling turning performance of Inconel 718 with hybrid nanofluid under MQL using ANN and ANFIS.
- Published in:
- Fracture & Structural Integrity, 2024, n. 70, p. 71, doi. 10.3221/IGF-ESIS.70.04
- By:
- Publication type:
- Article
Correlation coefficients of vibration signals and machine learning algorithm for structural damage assessment in beams under moving load.
- Published in:
- Fracture & Structural Integrity, 2024, n. 70, p. 55, doi. 10.3221/IGF-ESIS.70.03
- By:
- Publication type:
- Article
Introduction and application of a drive-by damage detection methodology for bridges using variational mode decomposition.
- Published in:
- Fracture & Structural Integrity, 2024, n. 70, p. 25, doi. 10.3221/IGF-ESIS.70.02
- By:
- Publication type:
- Article
Predicting damage in notched functionally graded materials plates through extended finite element method based on computational simulations.
- Published in:
- Fracture & Structural Integrity, 2024, n. 70, p. 1, doi. 10.3221/IGF-ESIS.70.01
- By:
- Publication type:
- Article
Impact of nanoparticles (B4C-Al<sub>2</sub>O<sub>3</sub>) on mechanical, wear, fracture behavior and machining properties of formwork grade Al7075 composites.
- Published in:
- Fracture & Structural Integrity, 2024, v. 18, n. 69, p. 210, doi. 10.3221/IGF-ESIS.69.15
- By:
- Publication type:
- Article
Residual stress determination by blind hole drilling and local displacement mapping in aluminium alloy aerospace components.
- Published in:
- Fracture & Structural Integrity, 2024, v. 18, n. 69, p. 192, doi. 10.3221/IGF-ESIS.69.14
- By:
- Publication type:
- Article
Enhancing the flexural performance of lightweight concrete slabs with CFRP Sheets: an experimental analysis.
- Published in:
- Fracture & Structural Integrity, 2024, v. 18, n. 69, p. 181, doi. 10.3221/IGF-ESIS.69.13
- By:
- Publication type:
- Article
A numerical study on predicting bond-slip relationship of reinforced concrete using surface based cohesive behavior.
- Published in:
- Fracture & Structural Integrity, 2024, v. 18, n. 69, p. 154, doi. 10.3221/IGF-ESIS.69.12
- By:
- Publication type:
- Article
Experimental investigation on the fatigue and fracture properties of a fine pearlitic rail steel.
- Published in:
- Fracture & Structural Integrity, 2024, v. 18, n. 69, p. 142, doi. 10.3221/IGF-ESIS.69.11
- By:
- Publication type:
- Article
Experimental study and mathematical modelling of face milling forces of high-strength high-viscosity shipbuilding steel.
- Published in:
- Fracture & Structural Integrity, 2024, v. 18, n. 69, p. 129, doi. 10.3221/IGF-ESIS.69.10
- By:
- Publication type:
- Article
Optimization of clamshell content for improved properties in bamboo-epoxy composites.
- Published in:
- Fracture & Structural Integrity, 2024, v. 18, n. 69, p. 29, doi. 10.3221/IGF-ESIS.69.03
- By:
- Publication type:
- Article
Titanium/FRP hybrid sandwich: in-plane flexural behaviour of short beam specimens.
- Published in:
- Fracture & Structural Integrity, 2024, v. 18, n. 69, p. 18, doi. 10.3221/IGF-ESIS.69.02
- By:
- Publication type:
- Article
About measuring the stress intensity factor of cracks in curved, brittle shells.
- Published in:
- Fracture & Structural Integrity, 2024, v. 18, n. 69, p. 1, doi. 10.3221/IGF-ESIS.69.01
- By:
- Publication type:
- Article
Fatigue behavior of pultruded fiberglass tubes under tension, compression and torsion.
- Published in:
- Fracture & Structural Integrity, 2024, v. 18, n. 69, p. 115, doi. 10.3221/IGF-ESIS.69.09
- By:
- Publication type:
- Article
Influence of soil salinity on the bearing capacity of the frozen wall.
- Published in:
- Fracture & Structural Integrity, 2024, v. 18, n. 69, p. 106, doi. 10.3221/IGF-ESIS.69.08
- By:
- Publication type:
- Article
Effectiveness of partial wrapping of stainless-steel wire mesh on compression behavior of concrete cylinders.
- Published in:
- Fracture & Structural Integrity, 2024, v. 18, n. 69, p. 71, doi. 10.3221/IGF-ESIS.69.06
- By:
- Publication type:
- Article
Methodology to minimize the dynamic response of tall buildings under wind load controlled through semi-active magneto-rheological dampers.
- Published in:
- Fracture & Structural Integrity, 2024, v. 18, n. 69, p. 89, doi. 10.3221/IGF-ESIS.69.07
- By:
- Publication type:
- Article
The influence of technological defects on the mechanical behavior of CFRP during buckling under compression based on DIC data and acoustic emission.
- Published in:
- Fracture & Structural Integrity, 2024, v. 18, n. 69, p. 60, doi. 10.3221/IGF-ESIS.69.05
- By:
- Publication type:
- Article
Civil structural health monitoring and machine learning: a comprehensive review.
- Published in:
- Fracture & Structural Integrity, 2024, v. 18, n. 69, p. 43, doi. 10.3221/IGF-ESIS.69.04
- By:
- Publication type:
- Article
Assessing structural integrity of non-homogeneous systems by means of Acoustic Emissions and Non-Extensive Statistical Mechanics.
- Published in:
- Fracture & Structural Integrity, 2024, n. 68, p. 440, doi. 10.3221/IGF-ESIS.68.29
- By:
- Publication type:
- Article
Degradation analysis of dynamic properties for plain concrete structures under mixed-mode fracture conditions via an improved cohesive crack approach.
- Published in:
- Fracture & Structural Integrity, 2024, n. 68, p. 422, doi. 10.3221/IGF-ESIS.68.28
- By:
- Publication type:
- Article
Phenomenon of ignition and explosion of high-entropy alloys of systems Ti-Zr-Hf-Ni-Cu, Ti-Zr-Hf-Ni-Cu-Co under quasi-static compression.
- Published in:
- Fracture & Structural Integrity, 2024, n. 68, p. 410, doi. 10.3221/IGF-ESIS.68.27
- By:
- Publication type:
- Article
Ultrasonic welding of lap joints of PEI plates with PEI/CF-fabric prepregs.
- Published in:
- Fracture & Structural Integrity, 2024, n. 68, p. 390, doi. 10.3221/IGF-ESIS.68.26
- By:
- Publication type:
- Article
On the stress- and strain-based fatigue behavior of welded thick-walled nodular cast iron.
- Published in:
- Fracture & Structural Integrity, 2024, n. 68, p. 371, doi. 10.3221/IGF-ESIS.68.25
- By:
- Publication type:
- Article
Shapley additive explanation on machine learning predictions of fatigue lifetimes in piston aluminum alloys under different manufacturing and loading conditions.
- Published in:
- Fracture & Structural Integrity, 2024, n. 68, p. 357, doi. 10.3221/IGF-ESIS.68.24
- By:
- Publication type:
- Article
Predictive modeling of fracture behavior in Ti6Al4V alloys manufactured by SLM process.
- Published in:
- Fracture & Structural Integrity, 2024, n. 68, p. 340, doi. 10.3221/IGF-ESIS.68.23
- By:
- Publication type:
- Article
Fracture processes numerical modeling of elastic-brittle bodies with statistically distributed subregions strength values.
- Published in:
- Fracture & Structural Integrity, 2024, n. 68, p. 325, doi. 10.3221/IGF-ESIS.68.22
- By:
- Publication type:
- Article
Improving the performance of damage repair in thin-walled structures with analytical data and machine learning algorithms.
- Published in:
- Fracture & Structural Integrity, 2024, n. 68, p. 310, doi. 10.3221/IGF-ESIS.68.21
- By:
- Publication type:
- Article
Machining effects and multi-objective optimization in Inconel 718 turning with unitary and hybrid nanofluids under MQL.
- Published in:
- Fracture & Structural Integrity, 2024, n. 68, p. 222, doi. 10.3221/IGF-ESIS.68.15
- By:
- Publication type:
- Article
Modelling of crack propagation in miniaturized and normal SENB specimens based on local failure criterion.
- Published in:
- Fracture & Structural Integrity, 2024, n. 68, p. 296, doi. 10.3221/IGF-ESIS.68.20
- By:
- Publication type:
- Article
Numerical Cohesive Zone Modeling (CZM) of Self-Anchoring AM Metal-CFRP joints.
- Published in:
- Fracture & Structural Integrity, 2024, n. 68, p. 280, doi. 10.3221/IGF-ESIS.68.19
- By:
- Publication type:
- Article
Metastability, adiabatic shear bands initiation and plastic strain localization in the AMg6 alloy under dynamic loading.
- Published in:
- Fracture & Structural Integrity, 2024, n. 68, p. 255, doi. 10.3221/IGF-ESIS.68.17
- By:
- Publication type:
- Article
An investigation of cracks caused by concrete shrinkage and temperature differences in common reinforced concrete bridge structures.
- Published in:
- Fracture & Structural Integrity, 2024, n. 68, p. 242, doi. 10.3221/IGF-ESIS.68.16
- By:
- Publication type:
- Article
A method for rapid estimation of residual stresses in metal samples produced by additive manufacturing.
- Published in:
- Fracture & Structural Integrity, 2024, n. 68, p. 267, doi. 10.3221/IGF-ESIS.68.18
- By:
- Publication type:
- Article
Effect of fiber orientation-based composite lamina on mitigation of stress intensity factor for a repaired plate: a finite element study.
- Published in:
- Fracture & Structural Integrity, 2024, n. 68, p. 209, doi. 10.3221/igf-esis.68.14
- By:
- Publication type:
- Article
Application of machine learning in fracture analysis of edge crack semi-infinite elastic plate.
- Published in:
- Fracture & Structural Integrity, 2024, n. 68, p. 197, doi. 10.3221/IGF-ESIS.68.13
- By:
- Publication type:
- Article