Works matching IS 19718993 AND DT 2020
Results: 123
Investigation of the effect of impact load on concrete-filled steel tube columns under fire.
- Published in:
- Fracture & Structural Integrity, 2020, n. 54, p. 317, doi. 10.3221/IGF-ESIS.54.22
- By:
- Publication type:
- Article
Biochar-based cement pastes and mortars with enhanced mechanical properties.
- Published in:
- Fracture & Structural Integrity, 2020, n. 54, p. 297, doi. 10.3221/IGF-ESIS.54.21
- By:
- Publication type:
- Article
Numerical analysis of reinforced concrete beams pre-cracked reinforced by composite materials.
- Published in:
- Fracture & Structural Integrity, 2020, n. 54, p. 282, doi. 10.3221/IGF-ESIS.54.20
- By:
- Publication type:
- Article
Numerical analysis of the influence of maximum residual thermal stresses on the intensity factor between the matrix and particle interfaces in metal matrix composite.
- Published in:
- Fracture & Structural Integrity, 2020, n. 54, p. 275, doi. 10.3221/IGF-ESIS.54.19
- By:
- Publication type:
- Article
Mechanical properties of the most common European woods: a literature review.
- Published in:
- Fracture & Structural Integrity, 2020, n. 54, p. 249, doi. 10.3221/IGF-ESIS.54.18
- By:
- Publication type:
- Article
Numerical and analytical simulation of ballistic projectile penetration due to high velocity impact on ceramic target.
- Published in:
- Fracture & Structural Integrity, 2020, n. 54, p. 226, doi. 10.3221/IGF-ESIS.54.17
- By:
- Publication type:
- Article
Optimum sustainable mix proportions of high strength concrete by using Taguchi method.
- Published in:
- Fracture & Structural Integrity, 2020, n. 54, p. 211, doi. 10.3221/IGF-ESIS.54.16
- By:
- Publication type:
- Article
Probabilistic elastic-plastic fracture mechanics analysis of propagation of cracks in pipes under internal pressure.
- Published in:
- Fracture & Structural Integrity, 2020, n. 54, p. 202, doi. 10.3221/IGF-ESIS.54.15
- By:
- Publication type:
- Article
Strain-gradient effect on the crack tip dislocations density.
- Published in:
- Fracture & Structural Integrity, 2020, n. 54, p. 192, doi. 10.3221/IGF-ESIS.54.14
- By:
- Publication type:
- Article
A closed form for the Stress Intensity Factor of a small embedded square-like flaw.
- Published in:
- Fracture & Structural Integrity, 2020, n. 54, p. 182, doi. 10.3221/IGF-ESIS.54.13
- By:
- Publication type:
- Article
Numerical analysis of circular and square concrete filled aluminum tubes under axial compression.
- Published in:
- Fracture & Structural Integrity, 2020, n. 54, p. 169, doi. 10.3221/IGF-ESIS.54.12
- By:
- Publication type:
- Article
Prediction of mechanical behavior of friction stir welded joints of AA3003 aluminum alloy.
- Published in:
- Fracture & Structural Integrity, 2020, n. 54, p. 153, doi. 10.3221/IGF-ESIS.54.11
- By:
- Publication type:
- Article
Tension Strength Prediction of Transverse Branch Plate-to-Rectangular Joint with Concrete Filling.
- Published in:
- Fracture & Structural Integrity, 2020, n. 54, p. 136, doi. 10.3221/IGF-ESIS.54.10
- By:
- Publication type:
- Article
Finite Element analysis of the behavior of bonded composite patches repair in aircraft structures.
- Published in:
- Fracture & Structural Integrity, 2020, n. 54, p. 128, doi. 10.3221/IGF-ESIS.54.09
- By:
- Publication type:
- Article
Experimental evaluation of effects of steel and glass fibers on engineering properties of concrete.
- Published in:
- Fracture & Structural Integrity, 2020, n. 54, p. 116, doi. 10.3221/IGF-ESIS.54.08
- By:
- Publication type:
- Article
Effect of stiffener characteristics on the seismic behavior and fracture tendency of steel shear walls.
- Published in:
- Fracture & Structural Integrity, 2020, n. 54, p. 104, doi. 10.3221/IGF-ESIS.54.07
- By:
- Publication type:
- Article
Bi-level Hybrid Uncertainty Quantification in Fatigue Analysis: S-N Curve Approach.
- Published in:
- Fracture & Structural Integrity, 2020, n. 54, p. 88, doi. 10.3221/IGF-ESIS.54.06
- By:
- Publication type:
- Article
Vibration control in buildings under seismic excitation using optimized tuned mass dampers.
- Published in:
- Fracture & Structural Integrity, 2020, n. 54, p. 66, doi. 10.3221/IGF-ESIS.54.05
- By:
- Publication type:
- Article
Mathematical data processing according to digital image correlation method for polymer composites.
- Published in:
- Fracture & Structural Integrity, 2020, n. 54, p. 56, doi. 10.3221/IGF-ESIS.54.04
- By:
- Publication type:
- Article
A Novel Method to Estimate the Damage Severity Using Spatial Wavelets and Local Regularity Algorithm.
- Published in:
- Fracture & Structural Integrity, 2020, n. 54, p. 36, doi. 10.3221/IGF-ESIS.54.03
- By:
- Publication type:
- Article
Modeling of CFRP strengthened RC beams using the SNSM technique, proposed as an alternative to NSM and EBR techniques.
- Published in:
- Fracture & Structural Integrity, 2020, n. 54, p. 21, doi. 10.3221/IGF-ESIS.54.02
- By:
- Publication type:
- Article
On the lumped damage modelling of reinforced concrete beams and arches.
- Published in:
- Fracture & Structural Integrity, 2020, n. 54, p. 1, doi. 10.3221/IGF-ESIS.54.01
- By:
- Publication type:
- Article
Numerical and Experimental Analysis of Stacking Sequences Effects in Composite Mechanical Joints under Impact Loadings.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 457, doi. 10.3221/IGF-ESIS.53.36
- By:
- Publication type:
- Article
A coupled elastoplastic damage model for brittle rocks.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 446, doi. 10.3221/IGF-ESIS.53.35
- By:
- Publication type:
- Article
Experimental and analytical investigation on the coupled elastoplastic damage model of coal-rock.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 434, doi. 10.3221/IGF-ESIS.53.34
- By:
- Publication type:
- Article
Glass/epoxy fiber orientation effects on translaminar fracture toughness under Mixed mode(I/II) load using FPB specimen.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 426, doi. 10.3221/IGF-ESIS.53.33
- By:
- Publication type:
- Article
Modeling of mechanical behavior of cork in compression.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 417, doi. 10.3221/IGF-ESIS.53.32
- By:
- Publication type:
- Article
Inelastic deformation and destruction of fiber-laminated polymer composites in stress concentration zones.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 406, doi. 10.3221/IGF-ESIS.53.31
- By:
- Publication type:
- Article
Applicability of Vyalov’s equations to ice wall strength estimation.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 394, doi. 10.3221/IGF-ESIS.53.30
- By:
- Publication type:
- Article
An analytical beam model for the evaluation of crack tip root rotations and displacements in orthotropic specimens.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 372, doi. 10.3221/IGF-ESIS.53.29
- By:
- Publication type:
- Article
Thermal Effect on Bond Strength of Rubberized Concrete Filled Steel Tubular Sections.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 353, doi. 10.3221/IGF-ESIS.53.28
- By:
- Publication type:
- Article
Risk based analysis of RHPP penstock structural integrity.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 345, doi. 10.3221/IGF-ESIS.53.27
- By:
- Publication type:
- Article
Effect of surface treatment on the fatigue strength of additive manufactured Ti6Al4V alloy.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 337, doi. 10.3221/IGF-ESIS.53.26
- By:
- Publication type:
- Article
A new approach of CMT seam welding deformation forecasting based on GA-BPNN.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 325, doi. 10.3221/IGF-ESIS.53.25
- By:
- Publication type:
- Article
Code development for the computational analysis of crack propagation in structures.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 306, doi. 10.3221/IGF-ESIS.53.24
- By:
- Publication type:
- Article
Mechanical behavior of materials with a compact hexagonal structure obtained by an advanced identification strategy of HCP material, AZ31B-H24.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 295, doi. 10.3221/IGF-ESIS.53.23
- By:
- Publication type:
- Article
Forecasting the bearing capacity of the mixed soil using artificial neural network.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 285, doi. 10.3221/IGF-ESIS.23.22
- By:
- Publication type:
- Article
Understanding powder bed fusion additive manufacturing phenomena via numerical simulation.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 252, doi. 10.3221/IGF-ESIS.53.21
- By:
- Publication type:
- Article
Monitoring and analysis of reinforced concrete plate-column structures under room temperature and fire based on acoustic emission.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 236, doi. 10.3221/IGF-ESIS.53.20
- By:
- Publication type:
- Article
Plastic stress intensity factor behavior at small and large scale yielding.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 223, doi. 10.3221/IGF-ESIS.53.19
- By:
- Publication type:
- Article
Stress intensity factors for mixed-mode crack growth in imitation models under biaxial loading.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 210, doi. 10.3221/IGF-ESIS.53.18
- By:
- Publication type:
- Article
Fatigue Analysis of Bitumen Modified with Composite of Nano-SiO<sub>2</sub> and Styrene Butadiene Styrene Polymer.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 202, doi. 10.3221/IGF-ESIS.53.17
- By:
- Publication type:
- Article
Comparative study of the repair of cracked plates with two different composite patches.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 187, doi. 10.3221/IGF-ESIS.53.16
- By:
- Publication type:
- Article
Evaluating Properties of Asphalt Mixtures Containing polymers of Styrene Butadiene Rubber (SBR) and recycled Polyethylene Terephthalate (rPET) against Failures Caused by Rutting, Moisture and Fatigue.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 177, doi. 10.3221/IGF-ESIS.53.15
- By:
- Publication type:
- Article
Uniformity of thickness of metal sheets by patchwork blanks: potential of adhesive bonding.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 166, doi. 10.3221/IGF-ESIS.53.14
- By:
- Publication type:
- Article
Improvement of Fatigue Properties of AZ31B Extruded Magnesium Alloy through Forging.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 152, doi. 10.3221/IGF-ESIS.53.13
- By:
- Publication type:
- Article
Fatigue Life Simulation and Analysis of Aluminum Alloy Sheet Selfpiercing Riveting.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 141, doi. 10.3221/IGF-ESIS.53.12
- By:
- Publication type:
- Article
Physical Parameters of Polymer Composite Materials Created on the Basis of Low and High Molecular Weight Rubbers.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 134, doi. 10.3221/IGF-ESIS.53.11
- By:
- Publication type:
- Article
Comparison of mechanical performance between friction-stir spot welded and adhesive bonded joints.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 124, doi. 10.3221/IGF-ESIS.53.10
- By:
- Publication type:
- Article
Effect of different parameters controlling the flexural behavior of RC beams strengthened with NSM using nonlinear finite element analys.
- Published in:
- Fracture & Structural Integrity, 2020, n. 53, p. 106, doi. 10.3221/IGF-ESIS.53.09
- By:
- Publication type:
- Article