Works matching IS 19718993 AND DT 2019
Results: 233
Numerical simulation of subsurface defect identification by pulsed thermography and improvement of this technique for noisy data.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 667, doi. 10.3221/IGF-ESIS.50.57
- By:
- Publication type:
- Article
Experimental characterisation of fatigue crack growth based on the CTOD measured from crack tip displacement fields using DIC.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 658, doi. 10.3221/IGF-ESIS.50.56
- By:
- Publication type:
- Article
Structural failure process of schistosity rock under microwave radiation at high temperatures.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 649, doi. 10.3221/IGF-ESIS.50.55
- By:
- Publication type:
- Article
Comparative study on the deterioration of granite under microwave irradiation and resistance-heating treatment.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 638, doi. 10.3221/IGF-ESIS.50.54
- By:
- Publication type:
- Article
J integral computation and limit load analysis of bonded composite repair in cracked pipes under pressure.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 623, doi. 10.3221/IGF-ESIS.50.53
- By:
- Publication type:
- Article
Stress intensity factor for small embedded cracks in weldments.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 613, doi. 10.3221/IGF-ESIS.50.52
- By:
- Publication type:
- Article
Experimental fracture resistance study for cracked bovine femur bone samples.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 602, doi. 10.3221/IGF-ESIS.50.51
- By:
- Publication type:
- Article
Effect of environmental conditions on the resistance of damaged composite materials.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 595, doi. 10.3221/IGF-ESIS.50.50
- By:
- Publication type:
- Article
Multi-response optimization of CuZn39Pb3 brass alloy turning by implementing Grey Wolf algorithm.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 584, doi. 10.3221/IGF-ESIS.50.49
- By:
- Publication type:
- Article
Damage evolution in marble under uniaxial compression monitored by Pressure Stimulated Currents and Acoustic Emissions.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 573, doi. 10.3221/IGF-ESIS.50.48
- By:
- Publication type:
- Article
Restoring stone monuments: Enlightening critical details by the combined use of innovative sensing techniques.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 560, doi. 10.3221/IGF-ESIS.50.47
- By:
- Publication type:
- Article
Comparison of the mechanical response of B400c and B450c dual phase steel bar categories, in long terms.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 548, doi. 10.3221/IGF-ESIS.50.46
- By:
- Publication type:
- Article
Fracture precursor phenomena in marble specimens under uniaxial compression by means of Acoustic Emission data.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 537, doi. 10.3221/IGF-ESIS.50.45
- By:
- Publication type:
- Article
Use of by-products for partial replacement of 3D printed concrete constituents; rheology, strength and shrinkage performance.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 526, doi. 10.3221/IGF-ESIS.50.44
- By:
- Publication type:
- Article
Multi-parameter analysis of curing cycle for GNPs/glass fabric/ epoxy laminated nanocomposites.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 517, doi. 10.3221/IGF-ESIS.50.43
- By:
- Publication type:
- Article
The use of acoustic emissions technique in the monitoring of fracturing in concrete using soundless chemical demolition agent.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 505, doi. 10.3221/IGF-ESIS.50.42
- By:
- Publication type:
- Article
Metal foaming by powder metallurgy process: investigation of different parameters on the foaming efficiency.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 497, doi. 10.3221/IGF-ESIS.50.41
- By:
- Publication type:
- Article
Damage and failure of Orban’s gun during the bombardment of Constantinople walls in 1453.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 481, doi. 10.3221/IGF-ESIS.50.40
- By:
- Publication type:
- Article
Imaging performance of a CaWO<sub>4</sub>/CMOS sensor.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 471, doi. 10.3221/IGF-ESIS.50.39
- By:
- Publication type:
- Article
Double initial and caustic curves in diametrically compressed transparent discs - Application to the contact length.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 451, doi. 10.3221/IGF-ESIS.50.38
- By:
- Publication type:
- Article
Comparative experimental study of the mechanical and fracture properties of Portland limestone and Corsehill sandstone.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 438, doi. 10.3221/IGF-ESIS.50.37
- By:
- Publication type:
- Article
Effect of fly ash on the corrosion performance and structural integrity of stainless steel concrete rebars in acid rain and saline environments.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 423, doi. 10.3221/IGF-ESIS.50.36
- By:
- Publication type:
- Article
A SEM-X-Ray assisted experimental approach for the determination of mechanical and thermal load – induced damage in MMCs.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 414, doi. 10.3221/IGF-ESIS.50.35
- By:
- Publication type:
- Article
Experimental and numerical study on the influence of critical 3D printing processing parameters.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 407, doi. 10.3221/IGF-ESIS.50.34
- By:
- Publication type:
- Article
A simplified damage evolution relationship and deformation characteristics of a pozzolanic lime mortar when subjected to unloading-reloading cycles in the pre-peak region.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 395, doi. 10.3221/IGF-ESIS.50.33
- By:
- Publication type:
- Article
Experimental uncertainty budget for concrete compressive strength test based on a multifactorial analysis.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 383, doi. 10.3221/IGF-ESIS.50.32
- By:
- Publication type:
- Article
An experimental study on restoration technique for the Acropolis of Athens: developing the experimental set-up for pull-out testing of titanium bars embedded in marble blocks.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 370, doi. 10.3221/IGF-ESIS.50.31
- By:
- Publication type:
- Article
Probabilistic geotechnical engineering analysis based on first order reliability method.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 354, doi. 10.3221/IGF-ESIS.50.30
- By:
- Publication type:
- Article
Simulation of the corrosion-induced damage on aluminum alloy 2024 specimens with equivalent surface notches.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 342, doi. 10.3221/10.3221/igf-esis.50.29
- By:
- Publication type:
- Article
Using a Hashin Criteria to predict the Damage of composite notched plate under traction and torsion behavior.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 331, doi. 10.3221/IGF-ESIS.50.28
- By:
- Publication type:
- Article
Brittle fracture model parameter estimation for irradiated BCC material through dislocation based crystal plasticity model.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 319, doi. 10.3221/IGF-ESIS.50.27
- By:
- Publication type:
- Article
The effect of temperature on low-cycle fatigue of shape memory alloy.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 310, doi. 10.3221/IGF-ESIS.50.26
- By:
- Publication type:
- Article
Experimental research on fracture behavior of concrete after high temperature.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 300, doi. 10.3221/IGF-ESIS.50.25
- By:
- Publication type:
- Article
Vibration analysis of functionally graded plates with porosity composed of a mixture of Aluminum (Al) and Alumina (Al<sub>2</sub>O<sub>3</sub>) embedded in an elastic medium.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 286, doi. 10.3221/IGF-ESIS.50.24
- By:
- Publication type:
- Article
A nonlinear elasto-plastic analysis of Reissner-Mindlin plates by finite element method.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 276, doi. 10.3221/IGF-ESIS.50.23
- By:
- Publication type:
- Article
Web rotational stiffness of continuous steel-concrete composite castellated beams.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 264, doi. 10.3221/IGF-ESIS.50.22
- By:
- Publication type:
- Article
A metallurgical and thermal analysis of Inconel 625 electron-beam welded joints.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 251, doi. 10.3221/IGF-ESIS.50.21
- By:
- Publication type:
- Article
Behaviour of precast reinforced concrete columns subjected to monotonic short-term loading.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 242, doi. 10.3221/IGF-ESIS.50.20
- By:
- Publication type:
- Article
Crack growth study under thermo-mechanical loads: parametric analysis for 2024 T3 aluminum alloy.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 231, doi. 10.3221/IGF-ESIS.50.19
- By:
- Publication type:
- Article
Finite Element Analysis and ANFIS investigation of seismic behavior of sandwich panels with different concrete material in two story steel building.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 209, doi. 10.3221/IGF-ESIS.50.18
- By:
- Publication type:
- Article
Quantifying the out-of-plane response of unreinforced masonry walls subjected to relative support motion.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 194, doi. 10.3221/IGF-ESIS.50.17
- By:
- Publication type:
- Article
Using XFEM Techniques to Predict the Damage of aluminum 2024T3 notched under tensile load.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 184, doi. 10.3221/IGF-ESIS.50.16
- By:
- Publication type:
- Article
Differences in the response to in-phase and out-of-phase multiaxial high-cycle fatigue loading.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 163, doi. 10.3221/IGF-ESIS.50.15
- By:
- Publication type:
- Article
Experimental and numerical investigation of the properties of the Hot Mix Asphalt Concrete with basalt and glass fiber.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 149, doi. 10.3221/IGF-ESIS.50.14
- By:
- Publication type:
- Article
Corrosion’s impact on wire rope strand response – Comparison with a theoretical predictive model.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 141, doi. 10.3221/IGF-ESIS.50.13
- By:
- Publication type:
- Article
Effects of ply orientation on nonlinear buckling of Aircraft composite stiffened panel.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 126, doi. 10.3221/IGF-ESIS.50.12
- By:
- Publication type:
- Article
Using a cohesive zone modeling to predict the compressive and tensile behavior on the failure load of single lap bonded joint.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 112, doi. 10.3221/IGF-ESIS.50.11
- By:
- Publication type:
- Article
Environmental effects on the reliability of an AISI 304 structure.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 98, doi. 10.3221/IGF-ESIS.50.10
- By:
- Publication type:
- Article
Crack growth based life prediction approach under LCF-HCF interaction.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 86, doi. 10.3221/IGF-ESIS.50.09
- By:
- Publication type:
- Article
Modeling of a cracked and repaired Al 2024T3 aircraft plate: effect of the composite patch shape on the repair performance.
- Published in:
- Fracture & Structural Integrity, 2019, n. 50, p. 68, doi. 10.3221/IGF-ESIS.50.08
- By:
- Publication type:
- Article