Found: 69
Select item for more details and to access through your institution.
Analysis of spatial vibrations of piezoceramic eccentric cylindrical shells interacting with an annular fluid layer.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 814, doi. 10.3221/IGF-ESIS.49.15
- By:
- Publication type:
- Article
Analysis of mechanical properties of transition segment of road and bridge based on high-strength foam concrete.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 831, doi. 10.3221/IGF-ESIS.49.73
- By:
- Publication type:
- Article
Possibility of tuning shunt circuits for multimodal damping of vibrations of structure with piezoelectric element.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 800, doi. 10.3221/IGF-ESIS.49.13
- By:
- Publication type:
- Article
Friction influence on the AA6060 aluminium alloy formability.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 791, doi. 10.3221/IGF-ESIS.49.70
- By:
- Publication type:
- Article
Evaluation on the fatigue behavior of sand-blasted AlSi10Mg obtained by DMLS.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 775, doi. 10.3221/IGF-ESIS.49.69
- By:
- Publication type:
- Article
Determination of fracture toughness in plain concrete specimens by R curve.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 763, doi. 10.3221/IGF-ESIS.49.68
- By:
- Publication type:
- Article
Prediction of thermomechanical behavior of acrylonitrile butadiene styrene using a newly developed nonlinear damage-reliability model.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 748, doi. 10.3221/IGF-ESIS.49.67
- By:
- Publication type:
- Article
Fracture properties of green mortars with recycled sand.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 676, doi. 10.3221/IGF-ESIS.49.61
- By:
- Publication type:
- Article
A viscoelastic-viscoplastic model for a thermoplastic and sensitivity of its rheological parameters to the strain-rate.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 666, doi. 10.3221/IGF-ESIS.49.60
- By:
- Publication type:
- Article
Carbonation Resistance of Reinforced Concrete under Bending Load.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 714, doi. 10.3221/IGF-ESIS.49.64
- By:
- Publication type:
- Article
Finite Element Analysis of the thermo-Mechanical Behavior of composite Pipe Elbows under Bending and Pressure loading.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 698, doi. 10.3221/IGF-ESIS.49.63
- By:
- Publication type:
- Article
Pipeline repair by composite patch under temperature and pressure loading.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 690, doi. 10.3221/IGF-ESIS.49.62
- By:
- Publication type:
- Article
Experimental analysis of aluminium/carbon epoxy hybrid laminates under flexural load.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 739, doi. 10.3221/IGF-ESIS.49.66
- By:
- Publication type:
- Article
Estimation of tensile mechanical parameters of existing masonry through the analysis of the collapse of Volterra's urban walls.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 725, doi. 10.3221/IGF-ESIS.49.65
- By:
- Publication type:
- Article
Numerical simulation of a crack emanating from a micro-cavity in the orthopedic cement by technical sub modeling of total hip prosthesis.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 586, doi. 10.3221/IGF-ESIS.49.54
- By:
- Publication type:
- Article
Behavior and damage of a pipe in the presence of a corrosion defect depth of 10% of its thickness and highlighting the weaknesses of the ASME / B31G method.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 643, doi. 10.3221/IGF-ESIS.49.58
- By:
- Publication type:
- Article
Rock brittleness evaluation method based on the complete stressstrain curve.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 557, doi. 10.3221/IGF-ESIS.49.52
- By:
- Publication type:
- Article
Damage identification in beams using additional rove mass and wavelet transform.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 614, doi. 10.3221/IGF-ESIS.49.56
- By:
- Publication type:
- Article
Stress intensity factors analyses for external semi-elliptical crack for repaired gas-pipeline by composite overwrap under pressure.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 599, doi. 10.3221/IGF-ESIS.49.55
- By:
- Publication type:
- Article
Numerical-Experimental characterization of honeycomb sandwich panel and numerical modal analysis of implemented delamination.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 655, doi. 10.3221/IGF-ESIS.49.59
- By:
- Publication type:
- Article
Flexural testing and analysis of full-strain-fields in sandwich composites.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 568, doi. 10.3221/IGF-ESIS.49.53
- By:
- Publication type:
- Article
Coupled identification of the hardening behavior laws and Gurson- Tvergaard-Needleman damage parameters - Validation on tear test of 12NiCr6 CT specimen.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 630, doi. 10.3221/IGF-ESIS.49.57
- By:
- Publication type:
- Article
A 3D analysis of crack-front shape of asymmetric repaired aluminum panels with composite patches.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 547, doi. 10.3221/IGF-ESIS.49.51
- By:
- Publication type:
- Article
Post- Impact Fatigue Damage Analysis of Quasi Isotropic CFRP Laminates through Infrared Thermography.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 536, doi. 10.3221/IGF-ESIS.49.50
- By:
- Publication type:
- Article
Specimen Level and Component Level Simulations of Fatigue Crack Growth Behavior under Cyclic Bending.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 526, doi. 10.3221/IGF-ESIS.49.49
- By:
- Publication type:
- Article
Structural Integrity Assessment of Weld for Joining Waveguide to Annular Linear Induction Pump Subjected to Vibration.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 515, doi. 10.3221/IGF-ESIS.49.48
- By:
- Publication type:
- Article
Optimization of Vanadium Content for Achieving Higher Wear Resistance and Hardness in High Cr-V White Cast Irons for Ball Tube Mill Liner Application.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 507, doi. 10.3221/IGF-ESIS.49.47
- By:
- Publication type:
- Article
Analysis of Low-Cycle Fatigue Behavior of AW2099-T83 Al-Li Alloy.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 487, doi. 10.3221/IGF-ESIS.49.46
- By:
- Publication type:
- Article
Investigating the contribution of geometry on the failure of cellular core structures obtained by additive manufacturing.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 478, doi. 10.3221/IGF-ESIS.49.45
- By:
- Publication type:
- Article
Numerical study of semi-elliptical cracks in the critical position of pipe elbow.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 463, doi. 10.3221/IGF-ESIS.49.44
- By:
- Publication type:
- Article
Characterisation and evaluation of the mechanical behaviour of endodontic-grade NiTi wires.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 450, doi. 10.3221/IGF-ESIS.49.43
- By:
- Publication type:
- Article
Use of the XFEM for the design of adhesively-bonded T-joints.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 435, doi. 10.3221/IGF-ESIS.49.42
- By:
- Publication type:
- Article
Fatigue strength of inner knurled interference fit joined by forming and cutting methods.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 429, doi. 10.3221/IGF-ESIS.49.41
- By:
- Publication type:
- Article
Mixed mode fracture: numerical evaluation and experimental validation using PMMA specimens.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 412, doi. 10.3221/IGF-ESIS.49.40
- By:
- Publication type:
- Article
Computational multi-scale analysis of simultaneous processes of delamination and damage accumulation in laminated composites.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 396, doi. 10.3221/IGF-ESIS.49.39
- By:
- Publication type:
- Article
Damage evolution in the AlMg6 alloy during high and very high cycle fatigue.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 383, doi. 10.3221/IGF-ESIS.49.38
- By:
- Publication type:
- Article
Simulation of deformation and fracture processes in nanocomposites.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 370, doi. 10.3221/IGF-ESIS.49.37
- By:
- Publication type:
- Article
Tension - torsion fatigue tests on the proton exchange membrane Nafion 115 (Perfluorosulfonic acid).
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 360, doi. 10.3221/IGF-ESIS.49.36
- By:
- Publication type:
- Article
The approach to fracture diagnosis by means of experimental measurements of the stored energy.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 314, doi. 10.3221/IGF-ESIS.49.31
- By:
- Publication type:
- Article
Effect of shape factor on structural reliability analysis of a surface cracked pipeline-parametric study.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 341, doi. 10.3221/IGF-ESIS.49.34
- By:
- Publication type:
- Article
Analysis of the presence of bonding defects on the fracture behavior of a damaged plate repaired by composite patch.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 331, doi. 10.3221/IGF-ESIS49.33
- By:
- Publication type:
- Article
Critically evaluating mechanics of structure genome-based micromechanics approach.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 321, doi. 10.3221/IGF-ESIS.49.32
- By:
- Publication type:
- Article
ANN Approach to Predict the Flow Stress of CMn (Nb-Ti-V) Micro Alloyed Steel.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 350, doi. 10.3221/IGF-ESIS.49.35
- By:
- Publication type:
- Article
Numerical analysis of a caprock integrity during oil production by steam-assisted gravity drainage method.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 302, doi. 10.3221/IGF-ESIS.49.30
- By:
- Publication type:
- Article
On one approach to the numerical modeling of the strain-stress state of layered rock mass.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 257, doi. 10.3221/IGF-ESIS.49.25
- By:
- Publication type:
- Article
Comparative study of conventional and hydromechanical deep drawing processes based on finite element analysis.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 282, doi. 10.3221/IGF-ESIS.49.28
- By:
- Publication type:
- Article
Duality of singularities of multiscale damage localization and crack advance: length variety in Theory of Critical Distances.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 272, doi. 10.3221/IGF-ESIS.49.27
- By:
- Publication type:
- Article
Predicting the crack path in a wedge under a concentrated tensile force by means of variational principle.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 267, doi. 10.3221/IGF-ESIS.49.26
- By:
- Publication type:
- Article
Detection and diagnosis of fault bearing using wavelet packet transform and neural network.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 291, doi. 10.3221/IGF-ESIS.49.29
- By:
- Publication type:
- Article
Steady plastic wave fronts and scale universality of strain localization in metals and ceramics.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2019, n. 49, p. 243, doi. 10.3221/IGF-ESIS.49.24
- By:
- Publication type:
- Article