Works matching IS 19395981 AND DT 2025 AND VI 19 AND IP 2
Results: 45
From the Editor: Recognizing Service and Excellence: From the Editor.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 617, doi. 10.1007/s40962-025-01567-x
- Publication type:
- Article
Metalcasting Industry Research.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 1228, doi. 10.1007/s40962-025-01566-y
- Publication type:
- Article
Probabilistic Property Modeling for Reliable Casting Design and Production.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 1212, doi. 10.1007/s40962-024-01535-x
- By:
- Publication type:
- Article
Effect of Magnesium Content on Precipitation Behavior of TiN-Containing Inclusions in High-Titanium High-Strength Steel.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 1117, doi. 10.1007/s40962-024-01386-6
- By:
- Publication type:
- Article
Effect of Sb Addition on Hot Tearing Susceptibility and Mechanical Properties of Mg–7Al–1Ca–xSb (x = 0, 0.5, 1, 1.5, and 2 wt.%) Alloys.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 1140, doi. 10.1007/s40962-024-01384-8
- By:
- Publication type:
- Article
Numerical Simulation and Experimental Validation of Fluidity of AlSi<sub>12</sub>CuNiMg Alloy using Multi Spiral Channel with Varying Thickness.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 1202, doi. 10.1007/s40962-024-01383-9
- By:
- Publication type:
- Article
Effect of Mg Content on the Shear Strength of Al-Si-Mg and Al-Si-Cu Alloys at Elevated Temperatures.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 717, doi. 10.1007/s40962-024-01381-x
- By:
- Publication type:
- Article
Examination of Variable Tilting Speed on Flow Behavior During Ladle Pouring in Die Casting Using SPH Simulation.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 1194, doi. 10.1007/s40962-024-01378-6
- By:
- Publication type:
- Article
A Comparative Study on Microstructure, Mechanical Property and Damping Capacity of Hypoeutectic Al–Si–Cu Alloy for Different Casting Technologies.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 1180, doi. 10.1007/s40962-024-01376-8
- By:
- Publication type:
- Article
The Effect of Zr and Li on the Microstructure of AlMg5Si2Mn-Type Casting Alloys.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 1156, doi. 10.1007/s40962-024-01374-w
- By:
- Publication type:
- Article
A Thermal Conductivity Model for Lamellar and Compacted Graphite Irons.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 1129, doi. 10.1007/s40962-024-01373-x
- By:
- Publication type:
- Article
Influence of Gating Geometry Variations on Flow Balancing of Horizontal Multi-gate Systems in Casting.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 1013, doi. 10.1007/s40962-024-01372-y
- By:
- Publication type:
- Article
Effect of Ageing Temperature on the Hardness, Microstructural and Dry Sliding Wear Performance of the Functionally Graded A356 Alloy.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 955, doi. 10.1007/s40962-024-01370-0
- By:
- Publication type:
- Article
Analysis of Fe-, Cu-, Mg- and Sr-Based Phases in Al–Si Alloys: Role of P Addition.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 699, doi. 10.1007/s40962-024-01369-7
- By:
- Publication type:
- Article
Mechanical and Sliding Wear Performance of Vacuum-Cast AA7075-Co Alloy Composites: Parametric Optimization and Ranking Analysis.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 1094, doi. 10.1007/s40962-024-01368-8
- By:
- Publication type:
- Article
Effects of Zr and Sr on microstructure and mechanical properties of cast Al–Si–Cu–Ni–Mg alloy.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 999, doi. 10.1007/s40962-024-01367-9
- By:
- Publication type:
- Article
Effect of Rare Earth Dy (dysprosium) on the Microstructures and Mechanical Properties of Hypereutectic Al–Si Alloy.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 1048, doi. 10.1007/s40962-024-01366-w
- By:
- Publication type:
- Article
Simulation and Experimental Investigation of a Combined Control Method for Stray Grain During Single Crystal Blade Solidification.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 843, doi. 10.1007/s40962-024-01357-x
- By:
- Publication type:
- Article
A Numerical Time Integration Procedure for Secondary Dendrite Arm Spacing in Hyper-Peritectic Steel Alloys.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 1031, doi. 10.1007/s40962-024-01365-x
- By:
- Publication type:
- Article
Effect of Thermal Cold Cycling on the Microstructure and Properties of Al–Cu–Mg–Ag Alloy.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 929, doi. 10.1007/s40962-024-01362-0
- By:
- Publication type:
- Article
Preparation of CaB<sub>6</sub>-Reinforced Al/Al-Si Composites and Study of the Comprehensive Properties.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 989, doi. 10.1007/s40962-024-01361-1
- By:
- Publication type:
- Article
Investigation of the Compound Strength of Hybrid Casting Components with Different Variations of Coated and Undercut Sheet Metal.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 944, doi. 10.1007/s40962-024-01359-9
- By:
- Publication type:
- Article
Observation of Flake Graphite Nucleation and Growth in Gray Iron through Interrupted Solidification and Inclusion Analysis.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 674, doi. 10.1007/s40962-024-01358-w
- By:
- Publication type:
- Article
Effect of Heat Treatment Temperature on the Microstructure, Wear and Friction of Ni–Nb–V Alloyed Manganese Steel.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 1067, doi. 10.1007/s40962-024-01363-z
- By:
- Publication type:
- Article
Comparison of Microstructure and Non-metallic Inclusions in Top-Filled and Bottom-Filled Gray Iron Castings.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 653, doi. 10.1007/s40962-024-01356-y
- By:
- Publication type:
- Article
GG20-GCI Brake Drum: The Effect of Mn/S on Machinability and Tensile Behavior.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 793, doi. 10.1007/s40962-024-01355-z
- By:
- Publication type:
- Article
Performance of a Water-Soluble Ceramic Core and Its Application in Aluminum Casting.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 977, doi. 10.1007/s40962-024-01354-0
- By:
- Publication type:
- Article
Toward Reducing Casting Defects via 3D Risers via 3D Sand-Printing: A Simulation Study.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 876, doi. 10.1007/s40962-024-01353-1
- By:
- Publication type:
- Article
Effect of CeO<sub>2</sub> Nanoparticles Addition on Tribological Behavior of Austenitic Ductile Iron.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 890, doi. 10.1007/s40962-024-01352-2
- By:
- Publication type:
- Article
SiC and MWCNT Blending Actions on Functional Performance of Hybrid AA2024 Alloy Nanocomposite Via Two Step Stir Cast Route.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 726, doi. 10.1007/s40962-024-01351-3
- By:
- Publication type:
- Article
Effect of Wall Thickness on Properties of Multilayer Composite Plaster Mold for Investment Casting.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 737, doi. 10.1007/s40962-024-01350-4
- By:
- Publication type:
- Article
An Assessment of South African Chromite Sand Crushing Ratio.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 619, doi. 10.1007/s40962-024-01337-1
- By:
- Publication type:
- Article
Mechanical and Wear Behavior of Al-Si5Cu3/ZrB<sub>2</sub> In-Situ Reinforced Metal Matrix Composite.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 749, doi. 10.1007/s40962-024-01349-x
- By:
- Publication type:
- Article
Microstructure and Low-Temperature Impact Behavior of ADI Containing Ni.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 917, doi. 10.1007/s40962-024-01347-z
- By:
- Publication type:
- Article
Effect of Er Addition and Solution Treatment on the Microstructure and Mechanical Properties of Hypoeutectic Al–10%Mg<sub>2</sub>Si–3.5%Cu Alloy.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 858, doi. 10.1007/s40962-024-01346-0
- By:
- Publication type:
- Article
Nano-Al<sub>2</sub>O<sub>3</sub> Particle Incorporated in Al Matrix Composite by Vortex-Free High-Speed Stir Casting.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 761, doi. 10.1007/s40962-024-01345-1
- By:
- Publication type:
- Article
Three-Dimensional Micromechanical Modelling of Deformation Behaviour of Rheocast A356 Alloy.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 809, doi. 10.1007/s40962-024-01342-4
- By:
- Publication type:
- Article
Solidification Processing of Reduced Graphene Oxide Dispersed Aluminum Composites by Squeeze Casting.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 664, doi. 10.1007/s40962-024-01348-y
- By:
- Publication type:
- Article
Molding Material Reclamation: A Case Study of Manufacturing Process Analysis Using a Causal-Based Graphical Model Approach.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 905, doi. 10.1007/s40962-024-01334-4
- By:
- Publication type:
- Article
Wear Resistance and Mechanical Properties of 7085 Alloy via Adding CNTs Based on Ultrasonic Casting.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 777, doi. 10.1007/s40962-024-01329-1
- By:
- Publication type:
- Article
Examples of Chunky Graphite Formation in Production of Ductile Iron Castings and Effective Countermeasures.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 682, doi. 10.1007/s40962-024-01324-6
- By:
- Publication type:
- Article
Effect of Different Mg<sub>2</sub>Si Concentrations on the Wear Properties and Microstructure of Mg<sub>2</sub>Si/Al–5 wt.% Cu Composites.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 1081, doi. 10.1007/s40962-024-01321-9
- By:
- Publication type:
- Article
The Influence of TiB<sub>2</sub> Particles on the Artificial Aging Behavior of TiB<sub>2</sub>/Al–5Cu Composite.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 828, doi. 10.1007/s40962-024-01316-6
- By:
- Publication type:
- Article
3D Printed Smart Mold for Sand Casting: Monitoring Binder Curing.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 643, doi. 10.1007/s40962-024-01314-8
- By:
- Publication type:
- Article
Iron and Steel Castings and Core Production Results from Finer Grades of Chromite Sand in Shell Applications.
- Published in:
- International Journal of Metalcasting, 2025, v. 19, n. 2, p. 635, doi. 10.1007/s40962-024-01311-x
- By:
- Publication type:
- Article