Works matching IS 19395981 AND DT 2024 AND VI 18 AND IP 2

Results: 70

Metalcasting Industry Research.

Published in:: International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1831, doi. 10.1007/s40962-024-01318-4
Publication type:: Article

From the Editor: Recognition Cast in Metal.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 913, doi. 10.1007/s40962-024-01317-5

By:

Prucha, Thomas

Publication type:

Article

Assessment of the Microstructure and Abrasive Wear Properties of an A380/NbC Aluminum Composite Produced by Stir Casting.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1783, doi. 10.1007/s40962-023-01154-y

By:

Arendarchuck, Bruno Edu;
Mayer, Andre Renan;
Lourençato, Luciano Augusto;
Lima, Carlos Roberto Camello;
Fals, Hipólito Domingo Carvajal

Publication type:

Article

Comparative Evaluation on Oxidation Resistance of Reactive AZ91D Magnesium Alloy with Various Face-Coats in Investment Casting.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1800, doi. 10.1007/s40962-023-01153-z

By:

Vyas, Akash V.;
Prajapati, Haresh P.;
Sutaria, Mayur P.

Publication type:

Article

Properties and Fracture Mechanism of Composite Plaster Mold Covered with Multiple Adhesion Layer for Investment Casting.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1770, doi. 10.1007/s40962-023-01152-0

By:

Lu, Yan;
Shi, Haiyang;
Lü, Kai;
Li, Jie;
Li, Yanfen;
Chen, Weidong

Publication type:

Article

Unraveling Compacted and Nodular Cast Iron Porosity: Case Studies Approach.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1811, doi. 10.1007/s40962-023-01149-9

By:

Queirós, Ricardo;
Domeij, Björn;
Diószegi, Attila

Publication type:

Article

Triboinformatics Modeling of Dry Sliding Wear of High Manganese Hadfield Steel alloys.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1750, doi. 10.1007/s40962-023-01147-x

By:

Harsha, B. P.;
Patnaik, Amar;
Banerjee, M. K.;
Kozeschnik, Ernst

Publication type:

Article

Analysis of the Quality of Incoming AlSi9Mn Alloy Ingots.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1723, doi. 10.1007/s40962-023-01146-y

By:

Gyarmati, Gábor;
Kéri, Zoltán;
Mende, Tamás;
Molnár, Dániel

Publication type:

Article

Correction: Effect of Heat Treatment on the Microstructures and Mechanical Properties of Al–4Cu–1.5Mg Alloy.

Published in:

2024

By:

Çadırlı, Emin;
Kaya, Hasan;
Büyük, Uğur;
Üstün, Erkan;
Gündüz, Mehmet

Publication type:

Correction Notice

Numerical Simulation and Casting Experiments on Particle Dispersion in 2219 Al Alloy by Introducing Al–5Ti–1B and Ultrasonic Treatment.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1710, doi. 10.1007/s40962-023-01142-2

By:

Hu, Renjun;
Jiang, Ripeng;
Li, Ruiqing;
Li, Xiaoqian;
Zhou, Honghui

Publication type:

Article

Squeeze Overcasting of Bimetallic Composite Al2026/Al–4.5%Cu with Acidic Quenching in Aging Treatment: Characterization of Mechanical Properties and Joint Interface Microstructure.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1644, doi. 10.1007/s40962-023-01141-3

By:

Ahmed, Naveed;
Ali, Muhammad Asad;
Raza, Muhammad Huzaifa;
Zahoor, Sadaf;
Ur Rehman, Ateekh;
Rafaqat, Madiha

Publication type:

Article

Effect of Electromagnetic Oscillation on Grain Structure of K477 Superalloy Turbine Guide Castings.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1686, doi. 10.1007/s40962-023-01139-x

By:

Xie, Zong-sheng;
Hao, Xin;
Liu, Guo-huai;
Zheng, Hang;
Lu, Qing-dian;
Wang, Ye;
Yi, Chu-shan;
Wang, Zhao-dong

Publication type:

Article

The Effect of Solution Temperature on Microstructure Evolution and Mechanical Properties of a Low-Silicon Cast Aluminum Alloy Containing Mn.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1573, doi. 10.1007/s40962-023-01138-y

By:

Qian, Dongling;
Lan, Kai;
Yang, Yitao

Publication type:

Article

Synthesis and Characteristics Evaluation of SiCnp and SiCnp/CNT-Reinforced AZ91D Alloy Hybrid Nanocomposites Via Semisolid Stir Casting Technique.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1633, doi. 10.1007/s40962-023-01137-z

By:

Padmavathi, K. R.;
Venkatesh, R.;
Devi, G. Ramya;
Muthukumar, V.

Publication type:

Article

Effects of CeO2 and Hf as Inoculant on the Microstructure and Impact Properties of Hadfield Austenitic Manganese Steel.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1608, doi. 10.1007/s40962-023-01136-0

By:

Sajjadi, Seyed Meysam;
Boutorabi, Seyed Mohammad Ali;
Mohammadaliha, Mahdi;
Bali, Saber

Publication type:

Article

Effect of Structural Features on Microstructure and Properties Homogeneity Based on Quantification and Statistical Analysis for Large-Scaled Complex Titanium Alloy Castings.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1535, doi. 10.1007/s40962-023-01135-1

By:

Yu, Wenhao;
Qie, Xiwang;
Zhao, Wenzheng;
Nan, Hai;
Wu, Guoqing

Publication type:

Article

Development of a Ni–Cr–Mo–V Alloyed Ductile Iron with High Hardness.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1677, doi. 10.1007/s40962-023-01133-3

By:

Yang, Chao;
Gao, Zhijie;
Du, Yuzhou;
Wang, Ke;
Jiang, Bailing

Publication type:

Article

Heat Treatment Simulation of Aluminum Alloy Wheels and Investigation of Process Steps.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1556, doi. 10.1007/s40962-023-01132-4

By:

Kutsal, Umit;
Arslan, Yagiz;
Ozaydin, Onur;
Akyildiz, Yagiz;
Yigit Kaya, A.;
Ertugrul, Onur

Publication type:

Article

Evaluation of the Effect of Shallow Cryogenic Treatment on Tribological Properties and Microstructure of High Manganese Steel.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1523, doi. 10.1007/s40962-023-01131-5

By:

Altuntaş, Gözde;
Altuntaş, Onur;
Bostan, Bülent

Publication type:

Article

High-Temperature Friction Wear Behavior of (AlB2 + Al2O3)/A356 Composites Regulated by Acoustic-Magnetic Coupling Field.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1589, doi. 10.1007/s40962-023-01130-6

By:

Jiao, Lei;
Zhang, Qinjun;
Zhao, Yutao;
Li, Fan;
Wang, Baowang;
Li, Hui;
Wang, Zhiwen;
Xu, Chengyong;
Volodymyr, Sheretskyi

Publication type:

Article

The Enhancement of Microstructures and Mechanical Characteristics for Sand Casting A357 Alloys with Magnetic Fields by Helmholtz Coils.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1455, doi. 10.1007/s40962-023-01129-z

By:

Purnomo, Muhamad Jalu;
Hsu, Yu-Xin;
Lin, Kun-Zhi;
Lin, Shih-Chao;
Wang, Cheng-Shun;
Lee, Chao-Yu;
Yu, Ing-Song

Publication type:

Article

Effect of Manganese on Microstructural, Mechanical, and Electrochemical Properties of Ni-Resist Gray Cast Irons.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1486, doi. 10.1007/s40962-023-01128-0

By:

Azimijam, Arsalan;
Khalil-Allafi, Jafar;
Mehrvarz, Alireza;
Akbari-Kharaji, Ehsan

Publication type:

Article

Microstructure and Abrasive Wear Properties of WC/Fe Matrix Composites Under Different Preform Wall Thicknesses.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1508, doi. 10.1007/s40962-023-01127-1

By:

Li, Zulai;
Gou, Haojie;
Zhang, Yingxing;
Zhang, Fei;
Shan, Quan;
Wei, He;
Yan, Zhaoyang

Publication type:

Article

Fracture Morphology and Fiber Reinforcement Mechanism of Composite Shells with Different Interfaces.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1547, doi. 10.1007/s40962-023-01126-2

By:

Li, Yanfen;
Liu, Xiangdong;
Lű, Kai;
Lu, Yan

Publication type:

Article

Effect of Heat Treatment on the Microstructures and Mechanical Properties of Thixoformed Graphene-reinforced Aluminium Alloy Composite.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1695, doi. 10.1007/s40962-023-01125-3

By:

Md Ali, Afifah;
Omar, Mohd Zaidi;
Salleh, Mohd Shukor;
Mohamed, Intan Fadhlina;
Hashim, Hanizam;
Wakhi Anuar, Nur Farah Bazilah

Publication type:

Article

3D Prediction of Microstructure Formation During Solidification of Mg-RE Alloy Processed by Laser Surface Remelting.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1329, doi. 10.1007/s40962-023-01124-4

By:

Wang, Shaofan;
Liu, Dong-Rong;
Wang, Lei;
Chen, Tian

Publication type:

Article

Effect of Chromium on Microstructure and Corrosion Behavior of High-Cr White Cast Irons Used in Coal-Fired Power Plant Desulfurization Facilities.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1664, doi. 10.1007/s40962-023-01123-5

By:

Yoo, Jin-Seok;
Ko, Sang-Jin;
Kim, Jung-Gu

Publication type:

Article

Study on Carbon Deposition and Coil Breakdown Mechanism of Medium Frequency Coreless Induction Furnace.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1236, doi. 10.1007/s40962-023-01122-6

By:

Cong, Jianchen;
Wang, Haixiao;
Wang, Darui;
Jiang, Tao;
Feng, Meizhen;
Ni, Peixiang;
Wang, Jinling

Publication type:

Article

Effects of Cu Addition and Spheroidization Treatment on Microstructure and Mechanical Properties of Al–Si–Cu–Mg–Ti–Zr–Sr Alloys.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1401, doi. 10.1007/s40962-023-01121-7

By:

Liu, Hao;
Hu, Wenru;
Pang, Yafei;
Qiu, Mingkun;
Du, Xiaodong

Publication type:

Article

Effect of the Cooling Capability Difference Between Additively Manufactured Sand Molds on Shrinkage Defect in A356 Alloy Castings.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1424, doi. 10.1007/s40962-023-01120-8

By:

Motoyama, Yuichi;
Tokunaga, Hitoshi;
Hashiguchi, Momoe;
Ooba, Yoshikazu;
Takiyoshi, Shun;
Okane, Toshimitsu

Publication type:

Article

Vacuum Stir Cast Developed Aluminium Alloy Hybrid Nanocomposite Performance Compared with Gravity Cast: Mechanical and Tribological Characteristics Study.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1273, doi. 10.1007/s40962-023-01119-1

By:

Baraniraj, A.;
Sathiyagnanam, A. P.;
Venkatesh, R.;
De Poures, Melvin Victor

Publication type:

Article

Influence of Number of Investment Cast Revert Remelting on Microstructure and Mechanical Properties of Fe–Cr–Co Heat-Resistant Stainless Steel Alloy.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1739, doi. 10.1007/s40962-023-01118-2

By:

Melali, P.;
Boutorabi, S. M. A.;
Divandari, M.

Publication type:

Article

Effect of the Addition of Waste Glass Powder along with TiC as Reinforcement on Microstructure, Wettability, Mechanical and Tribological Behavior of AZ91D Magnesium Based Alloy.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1387, doi. 10.1007/s40962-023-01117-3

By:

Dwivedi, Shashi Prakash;
Chaudhary, Vijay;
Sharma, Shubham

Publication type:

Article

Enhancement of Magnesium Alloy (AZ31B) Nanocomposite by the Additions of Zirconia Nanoparticle Via Stir Casting Technique: Physical, Microstructural, and Mechanical Behaviour.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1465, doi. 10.1007/s40962-023-01116-4

By:

Senthilkumar, S.;
Revathi, K.;
Venkatesh, R.;
Sivaprakash, E.

Publication type:

Article

Mechanical and Tribological Behaviour of Ti2AlC Reinforced Hypereutectic Aluminium Alloy Matrix Composite Fabricated by Vacuum Assisted Induction Melting: Experimental and Theoretical Modelling.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1173, doi. 10.1007/s40962-023-01115-5

By:

Keerthipalli, Trinath;
Aepuru, Radhamanohar;
Biswas, Ajay

Publication type:

Article

Microstructure, Mechanical, and Electrochemical Corrosion Performance of Ti/HA (Hydroxyapatite) Particles Reinforced Mg-3Zn Squeeze Casted Composites.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1348, doi. 10.1007/s40962-023-01114-6

By:

Vignesh, P.;
Ramanathan, S.;
Ashokkumar, M.;
Sonar, Tushar;
Ananthi, V.

Publication type:

Article

Corrosion Behavior of SiMo Ductile Cast Iron in Different Corrosive Environments.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1475, doi. 10.1007/s40962-023-01112-8

By:

Abdelrahim, Dawlat M.;
Ateia, Ebtesam E.;
Nofal, Adel A.;
Gomaa, Mona H.;
Hamid, Z. Abdel

Publication type:

Article

Effects of the Wettability Between the Coating and the Liquid EPS on the Filling Process of Lost Foam Casting.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1318, doi. 10.1007/s40962-023-01111-9

By:

Sun, Chi;
Cao, Zhanyi

Publication type:

Article

Improvements on the Mechanical Properties of Al 6063 Alloy by Microalloying with Cu and Cr Elements.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1309, doi. 10.1007/s40962-023-01110-w

By:

Meng, Xiangchen;
Zhang, Wei;
Ma, Yuqi;
Xiang, Qingchun;
Ren, Yinglei;
Qiu, Keqiang

Publication type:

Article

Effects of Forming Specific Pressure and Filling Speed on Microstructure and Mechanical Properties of Thin-Walled CuSn10P1 Alloy Parts by Rheological Squeeze Forming.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1438, doi. 10.1007/s40962-023-01109-3

By:

Xiong, Wentao;
Zhou, Rongfeng;
Liu, Zhangxing;
Wen, Ke;
Yin, Xinhua;
Li, Yongkun

Publication type:

Article

A Casting Shrinkage Prediction Method Based on Model Automated Self-correction Strategy.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1052, doi. 10.1007/s40962-023-01108-4

By:

Tian, Guoliang;
Bu, Kun;
Tian, Qingqing;
He, Jie

Publication type:

Article

Effect of Nano-Sized SiO2 Particles Addition on Microstructure and Mechanical Properties of As-Cast Ductile Iron.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1293, doi. 10.1007/s40962-023-01106-6

By:

Zhao, Yu;
Zhang, Wei;
Li, Guanglong;
Dong, Shulin;
Li, Rongde;
Sun, Wei;
Zhou, Guoping;
Chen, Ruirun;
Wang, Qi;
Qu, Yingdong

Publication type:

Article

Effect of Nd Addition on the Microstructure and Cyclic Oxidation Behavior of NiAl–Cr(Mo) Eutectic Alloys.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1192, doi. 10.1007/s40962-023-01102-w

By:

Atas, Mehmet Sahin;
Yildirim, Mehmet

Publication type:

Article

Production of Inorganic Hollow Cores Using Sacrificial Ice Cores.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1075, doi. 10.1007/s40962-023-01101-x

By:

Locke, Christopher;
Polzin, Hartmut;
Bissels, Joshua;
Günther, Daniel

Publication type:

Article

Method of Predicting Shrinkage Defects and Deriving Process Conditions in HPDC (High-Pressure Die-Casting) for Electric Vehicle Motor Housings.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1262, doi. 10.1007/s40962-023-01100-y

By:

Lee, Seungcheol;
Han, Dosuck;
Kang, Sungha;
Kim, Naksoo

Publication type:

Article

Influence of Cantor Alloy Particles on Microstructure, and Wear Behavior of Aluminum Metal Matrix Composite.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1361, doi. 10.1007/s40962-023-01099-2

By:

Kumar, Akshay;
Singh, Alok;
Suhane, Amit;
Singh, Ashish Kumar;
Verma, Pradip Kumar

Publication type:

Article

Investigations on Physical, Mechanical, Thermal, Thermo-mechanical, and Sliding Wear Performance of Ti–AA7075 Alloy Composites Fabricated via High Vacuum Casting Route.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1217, doi. 10.1007/s40962-023-01098-3

By:

Kumar, Ashiwani;
Kumar, Mukesh

Publication type:

Article

Semi-solid Tensile Behavior and its Relationship with Hot Tearing Susceptibility of Mg–xCa Alloys.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1119, doi. 10.1007/s40962-023-01097-4

By:

Zhao, Hua;
Song, Jiangfeng;
Wang, Jing;
Liu, Qiang;
Chen, Gong;
Xiao, Jianfei;
Liao, Jin'ge;
Teng, Hang;
Jiang, Bin;
Pan, Fusheng

Publication type:

Article

Microstructure and Mechanical Properties of the Interface of Aluminum-Brass Bimetals Produced via Vertical Centrifugal Casting (VCC).

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1204, doi. 10.1007/s40962-023-01096-5

By:

Gholami, Morteza;
Ghaemi Khiavi, Sina;
Dehhaghi, Ali;
Akbarifar, Mehdi;
Divandari, Mehdi

Publication type:

Article

Effect of Solution Heat Treatment (Temperature and Time) on Microstructure and Properties of Al–Cu–Mg Alloy.

Published in:

International Journal of Metalcasting, 2024, v. 18, n. 2, p. 1151, doi. 10.1007/s40962-023-01095-6

By:

Patel, Nikunj;
Joshi, Mohit;
Singh, Abhishek;
Mittal, Gaurav Nandkishore;
Agrawal, Mitushi;
Manani, Sunil;
Pradhan, Ajaya Kumar

Publication type:

Article