Works matching IS 19395981 AND DT 2023 AND VI 17 AND IP 4

Results: 73

Effect of Squeeze Condition on Static and Dynamic Properties of Green Sand Test Piece.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2493, doi. 10.1007/s40962-023-00998-8

By:

Funahashi, Mikito;
Kume, Takachiho;
Deguchi, Daisuke;
Maeda, Yasuhiro

Publication type:

Article

New Evaluation Method for Hot Cracking Tendency of High Alloyed Steels Containing Niobium.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2484, doi. 10.1007/s40962-023-00996-w

By:

Scheidhauer, Nico;
Brambila, Jean Amadeo;
Wolf, Gotthard;
do Nascimento, Francisco Manoel Perez;
Dommaschk, Claudia

Publication type:

Article

Correction: Development of 3D Macrosegregation Analysis Technique for a 19-Ton Steel Ingot with Complex Shape.

Published in:

2023

By:

Nishimura, Tomohiro;
Kishimoto, Atsushi;
Tani, Kazuya;
Saito, Tomonobu

Publication type:

Correction Notice

Microstructure, Mechanical Properties, and Corrosion Behavior of a Novel Biodegradable Zn–2Sn–0.5Sr Implant Alloy Prepared by Ultrasonic Treatment.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 3104, doi. 10.1007/s40962-023-00993-z

By:

Li, Qinglin;
Zhao, Zhixin;
Yang, Jing;
Liu, Dexue;
Lan, Yefeng;
Hu, Xiaowu

Publication type:

Article

Potential and Challenges of Fused Granular Fabrication in Patternmaking.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2469, doi. 10.1007/s40962-023-00989-9

By:

Kalle, Jalava;
Joni, Korpi;
Alexander, Strakh;
Juhani, Orkas

Publication type:

Article

Effect of Strontium on the Microstructure, Mechanical, and Tribological Properties of the Zn–40Al–2Cu Alloy.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 3133, doi. 10.1007/s40962-023-00985-z

By:

Hacıosmanoğlu, Murat;
Tellioğlu, Murat;
Hekimoğlu, Ali Paşa

Publication type:

Article

A review on the Cyclic Oxidation Behavior and Mechanical Properties of the Pt–Al-Coated Cast Ni-based Superalloys.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 3082, doi. 10.1007/s40962-023-00984-0

By:

Barjesteh, Mohammad Mehdi

Publication type:

Article

Microstructural and Mechanical Properties of Thixoformed Al–Si–Cu–Mg Alloy: Effect of Partial Remelting Treatment.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 3155, doi. 10.1007/s40962-023-00983-1

By:

Arif, M. A. M.;
Omar, M. Z.;
Samat, S.;
Sajuri, Z.

Publication type:

Article

Research and Development of Gating and Riser Process Optimization Integrated System for Steel Casting.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2452, doi. 10.1007/s40962-023-00982-2

By:

Wang, Tong;
Zhou, Jianxin;
Wang, Lei;
Zhang, Zelin;
Zhang, Huan;
Xia, Xuhui

Publication type:

Article

Research Status and Prospect of Hot Tearing of Mg–Al Alloys.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 3053, doi. 10.1007/s40962-023-00981-3

By:

Li, Tongxu;
Wang, Feng;
Du, Xudong;
Bai, Shengwei;
Wang, Wei;
Wang, Zhi;
Zhou, Le;
Mao, Pingli;
Liu, Zheng

Publication type:

Article

Effect of Isothermal Heat Treatment Time on the Microstructure and Properties of 4.3% Al Austempered Ductile Iron.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 3005, doi. 10.1007/s40962-023-00980-4

By:

Shakeri, B.;
Heidari, E.;
Boutorabi, S. M. A.

Publication type:

Article

Design, fabrication and operation of a device for manufacturing metal foams and composites by infiltration.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 3019, doi. 10.1007/s40962-023-00979-x

By:

Carranza, J. C.;
Casas, B. Y.;
Figueroa, I. A.;
Carranza, L. E.;
Alfonso, I.

Publication type:

Article

Feasibility of Evaluating the Vermicularizing Effect by the Active Oxygen of Molten Iron.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 3070, doi. 10.1007/s40962-023-00978-y

By:

Shi, Dequan;
Gao, Guili;
Liu, Zeyu;
Li, Dan;
Lang, Hongzhe

Publication type:

Article

Mechanical Property Prediction Based on Casting Process Simulation for Structural Parts in the Wind Gearbox Sector.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 3032, doi. 10.1007/s40962-023-00977-z

By:

Gómez, T.;
Cuesta, I. I.;
Alegre, J. M.

Publication type:

Article

Molten Aluminum Alloy Flow through Casting Filter Installed at Sprue.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2477, doi. 10.1007/s40962-023-00976-0

By:

Taki, Kosuke;
Endo, Gaku;
Maeda, Yasuhiro

Publication type:

Article

The Effect of Using Ferro-Alloy on the Properties of AlCoFeNiMoTi High-Entropy Alloy Produced by Arc-Melting Method: Design of Low Cost.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2948, doi. 10.1007/s40962-023-00975-1

By:

Güler, Seval H.

Publication type:

Article

Effect of Ca Addition on Mechanical Properties and the Ignition Temperature of Cast WE43 alloys.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 3121, doi. 10.1007/s40962-023-00974-2

By:

Zhu, Huiwen;
Yu, Baoyi;
Bian, Jiancong;
Chang, Dongxu;
Zheng, Li

Publication type:

Article

Shrinkage Cavities in Conical Mold Castings of Aluminum Alloy.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2431, doi. 10.1007/s40962-023-00973-3

By:

Nishihara, Taiki;
Nakamura, Yuto;
Maeda, Yasuhiro

Publication type:

Article

Research on Green Casting Technology and Equipment of Digital Frozen Sand Mold.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2439, doi. 10.1007/s40962-023-00972-4

By:

Shan, Zhongde;
Yang, Haoqin;
Yan, Dandan;
Dong, Shijie;
Shi, Jianpei

Publication type:

Article

A Succinct History of Metalcasting Knowledge.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2373, doi. 10.1007/s40962-023-00971-5

By:

Stefanescu, Doru M.

Publication type:

Article

Relationship Between Thermal Conductivity and Tensile Strength in Cast Irons.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2862, doi. 10.1007/s40962-023-00970-6

By:

Fourlakidis, Vasilios;
Hernando, Juan Carlos;
Holmgren, Daniel;
Diószegi, Attila

Publication type:

Article

Synthesis, Microstructure, Physical and Mechanical Characterization of AA6061/B4C/TiO2 Hybrid Composites.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2904, doi. 10.1007/s40962-023-00969-z

By:

Raja, R.;
Ramanathan, K.;
Sakthi Sadhasivam, RM;
Selvaraj, S.

Publication type:

Article

Erosion Resistance of Cast Steel and Spheroidal Graphite Cast Iron with a High-Manganese Content in Molten Aluminum Alloys.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2421, doi. 10.1007/s40962-023-00968-0

By:

Goto, Ikuzo;
Shirai, Kota;
Kurosawa, Kengo;
Chiba, Masanori;
Kon, Toshiharu

Publication type:

Article

Hot Tearing Behavior of ZL205A Alloy Cylindrical Low-Pressure Castings with Slit Gating and Feeding System.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2970, doi. 10.1007/s40962-023-00967-1

By:

Huang, Xixi;
Xue, Xiang;
Wang, Mingjie;
Dai, Guixin;
Wu, Shiping

Publication type:

Article

Novel Experimental Method for Metal Flow Analysis using Open Molds for Sand Casting.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2892, doi. 10.1007/s40962-023-00966-2

By:

King, Philip;
Manogharan, Guha

Publication type:

Article

Development of 3D Macrosegregation Analysis Technique for a 19-Ton Steel Ingot with Complex Shape.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2958, doi. 10.1007/s40962-023-00965-3

By:

Nishimura, Tomohiro;
Kishimoto, Atsushi;
Tani, Kazuya;
Saito, Tomonobu

Publication type:

Article

Microstructure and Mechanical Behaviour of Mg–4Zn–2Sr Alloy with Varying Zirconium Addition.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 3143, doi. 10.1007/s40962-023-00964-4

By:

Godwin, J.;
Ajith Kumar, K. K.;
Muthukumar, S.

Publication type:

Article

Investigation of Effect of the Rheological Parameters on the Flow Behavior of ADC12 Al Alloy in Rheo-Pressure Die-casting.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2836, doi. 10.1007/s40962-023-00962-6

By:

Kumbhare, Anand;
Biswas, Prasenjit;
Bisen, Anil;
Choudhary, Chandan

Publication type:

Article

Effect of ZrB2 and Fly Ash on Tribological and Mechanical Properties of Aluminium 7075-Based Metal Matrix Composite at Elevated Temperatures in Reciprocating Motion.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2928, doi. 10.1007/s40962-023-00961-7

By:

Kumar, Prakash;
Kumar, Binay

Publication type:

Article

From the Editor: Monitor, Measure, Manage, and Control.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2361, doi. 10.1007/s40962-023-01162-y

By:

Prucha, Thomas

Publication type:

Article

Effect of TiO2 and SiC Nanoparticles on the Microstructure and Mechanical Characteristics of AA7178 Metal Matrix Composite.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2849, doi. 10.1007/s40962-023-00959-1

By:

Bharat, Nikhil;
Bose, P. S. C.

Publication type:

Article

Studies on Mold Filling Behavior of Al–10.5Si–1.7Cu Al Alloy During Rheo Pressure Die Casting System.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2868, doi. 10.1007/s40962-023-00958-2

By:

Gautam, Sujeet Kumar;
Roy, Himadri;
Lohar, Aditya Kumar;
Samanta, Sudip Kumar

Publication type:

Article

Microstructure Evolution and Thermophysical Properties of Hypereutectic Al-Fe-Ni Alloys.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2780, doi. 10.1007/s40962-023-00957-3

By:

Jiang, Minhao;
Mo, Liling;
Zhou, Xiong;
Liu, Xuhong;
Zhan, Meiyan;
Du, Jun

Publication type:

Article

The Microstructure and Mechanical Stability of Sc-Doped Mg2Si/Al Composite: Experiments and First Principles Calculation.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2992, doi. 10.1007/s40962-023-00956-4

By:

Zou, Xue;
Liu, Tongyu;
Liu, Weihua;
Yang, Chao;
Li, Yingmin;
Pan, Ying;
Kong, Zhanqi

Publication type:

Article

Investigation on Mechanical and Morphological Behaviours of Al–Zn–Mg–Cu/(SiC + Al2O3) Hybrid Composites Produced by Squeeze Casting.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2878, doi. 10.1007/s40962-023-00960-8

By:

Karthikraja, M.;
Ramanathan, K.;
Sadhasivam, R. M. Sakthi;
Geetha, S.

Publication type:

Article

Metalcasting Industry Research.

Published in:: International Journal of Metalcasting, 2023, v. 17, n. 4, p. 3168, doi. 10.1007/s40962-023-01159-7
Publication type:: Article

Correction: Statistical Comparisons & Correlations of Thermal Analysis, Ultrasonic Velocity and Image Analysis Metallography Methods for Quantification of Ductile Iron Microstructure.

Published in:

2023

By:

Cree, James;
Hoover, Adam

Publication type:

Correction Notice

Effect of Rare Earth Elements Erbium and Europium Addition on Microstructure and Mechanical Properties of A356 (Al–7Si–0.3Mg) Alloy.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2612, doi. 10.1007/s40962-023-01060-3

By:

Sahin, Hayati;
Dispinar, Derya

Publication type:

Article

Highlights of the 74th World Foundry Congress.

Published in:: International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2372, doi. 10.1007/s40962-023-01150-2
Publication type:: Article

Digital Transformation of Metal Casting Process Using Sand 3D Printing Technology with a Novel Methodology of Casting Design Inside a Core.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2674, doi. 10.1007/s40962-023-01088-5

By:

Han, Kuk-Hyun;
Baek, Jin-Wook;
Lim, Tae Wan;
Park, Ju Min

Publication type:

Article

Modification of Casting Production Parameters in Order to Obtain Products with the Assumed Parameters with Using Machine Learning.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2680, doi. 10.1007/s40962-023-01076-9

By:

Wilk-Kołodziejczyk, Dorota;
Małysza, Marcin;
Jaśkowiec, Krzysztof;
Bitka, Adam;
Głowacki, Mirosław

Publication type:

Article

Additively Manufactured 2D Matrix Code Direct Part-Marking Casting Requirements.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2647, doi. 10.1007/s40962-023-01073-y

By:

Uyan, Tekin Ç.;
Jalava, Kalle;
Orkas, Juhani;
Otto, Kevin

Publication type:

Article

Differences in the Structure Formation of SGI and CGI During Heating for Quenching.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2638, doi. 10.1007/s40962-023-01065-y

By:

Panov, A. G.;
Shaehova, I. F.;
Gurtovoy, D. A.

Publication type:

Article

Innovate or Die.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2363, doi. 10.1007/s40962-023-01140-4

By:

Keough, John R.

Publication type:

Article

Correction: Visualization of Microscopic Behavior of Atomized Flow in High-Pressure Die Casting Products Using a Multiphase Flow Analysis System.

Published in:

2023

By:

Koya, Eitaro;
Nakagawa, Masahiko;
Kitagawa, Shinya;
Ishimoto, Jun;
Nakano, Yoshikatsu;
Ochiai, Naoya

Publication type:

Correction Notice

Effects of Electromagnetic Stirring process on Melt Quality of A356 Aluminum Alloy.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2652, doi. 10.1007/s40962-023-01052-3

By:

Shin, Sunmi;
Jeon, Jong Bae;
Jang, Ho Sung;
Kim, Suheon;
Yoon, Pil-Hwan;
Park, Jin-Young;
Roh, Joong Suk;
Park, Seong Rak;
Lee, Jongdeok;
Moon, Seunghwan;
Choi, Yoon Suk

Publication type:

Article

Innovative Inspection Device for Investment Casting Foundries.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2663, doi. 10.1007/s40962-023-01051-4

By:

Yousef, Nabhan;
Sata, Amit

Publication type:

Article

Effect of Zr Addition on Selected Properties and Microstructure of Aluminum Alloy AlSi5Cu2Mg.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2598, doi. 10.1007/s40962-023-01048-z

By:

Bolibruchová, Dana;
Sýkorová, Martina;
Brůna, Marek;
Matejka, Marek;
Širanec, Lukáš

Publication type:

Article

Advanced Procedures for Series Production with 3D-Printed Core Packages.

Published in:

International Journal of Metalcasting, 2023, v. 17, n. 4, p. 2572, doi. 10.1007/s40962-023-01046-1

By:

Erhard, Patricia;
Hartmann, Christoph;
Li, Rui;
Volk, Wolfram;
Günther, Daniel

Publication type:

Article

Correction: Visualization of Microscopic Behavior of Atomized Flow in High-Pressure Die Casting Products Using a Multiphase Flow Analysis System.

Published in:

2023

By:

Koya, Eitaro;
Nakagawa, Masahiko;
Kitagawa, Shinya;
Ishimo, Jun;
Nakano, Yoshikatsu;
Ochiai, Naoya

Publication type:

Correction Notice