Works matching IS 19322135 AND DT 2023 AND VI 18 AND IP 5

Results: 26

Study on the hydraulic classification characteristics of micron‐sized silica particles.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2966
By:
- Zhang, Yaheng;
- Tang, Zhiyong
Publication type:
Article
Numerical study on the effect of mass flux on the low frequency pressure oscillation occurred in oxygen jet condensation.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2965
By:
- Zhu, Chengfeng;
- Li, Yanzhong;
- Wang, Lei;
- Ma, Yuan;
- Xie, Fushou
Publication type:
Article
Management of physical and chemical water quality in Kotchener drain (Kafr El Sheikh, Egypt).
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2964
By:
- Osman, Walaa S.;
- Ali, Dina;
- Bhran, Ahmed A.;
- Hassanean, Mohamed H.;
- Shoaib, Abeer M.
Publication type:
Article
Effect of 915‐MHz low‐temperature microwave irradiation on the molecular structure of coking coal.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2963
By:
- Ge, Tao;
- Wu, Manting;
- Xu, Jingyao;
- Cheng, Jiezhong;
- Liu, Dinghao;
- Wu, Jing;
- Liu, Song
Publication type:
Article
Nitrogen‐doped biochar as an efficient sensing material for the electrochemical detection of heavy metal ion Pb2+ and Cd2+.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2962
By:
- Yang, Tianming;
- Xin, Xin;
- Jiang, Jin‐Chi;
- Yin, Zhenhao;
- Meng, Long‐Yue
Publication type:
Article
Preparation of MoS2/diesel dispersion nanofluid and its application in diluent blending‐viscosity reduction technology for heavy oil production.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2961
By:
- Fu, Lipei;
- Ren, Zhangkun;
- Jiang, Lujun;
- Chen, Wenzheng;
- Ding, Wenli;
- Liao, Kaili;
- Qiu, Xinxin;
- Chen, Lifeng;
- Shao, Minglu
Publication type:
Article
Rheo‐kinetic study of 4‐(Dimethylsilyl) butyl ferrocene‐grafted HTPB‐based composite propellant and evaluation of casting rate.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2960
By:
- Hoque, Ehtasimul;
- Ghosal, Subhajit;
- Nagar, Nisha;
- Patil, Rajendra S.
Publication type:
Article
Synthesis, characterization, and computational study of N‐protected amino acid inhibitors as well as assessment of corrosion resistance properties on mild steel in.5 M H2SO4 solution.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2959
By:
- Sharma, Shikha;
- Paridwal, Yogesh Kumar;
- Sharma, Shobhana;
- Sharma, Ankit;
- Sharma, Sushil Kumar
Publication type:
Article
Separation and thermal conversion of group components from medium‐low‐temperature coal tar pitch.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2958
By:
- Zhang, Yuzhu;
- Zhu, Yaming;
- Zhu, Huihui;
- Cheng, Junxia;
- Bai, Yonghui;
- Lv, Jun;
- Zhao, Xuefei
Publication type:
Article
Correction to "Ash deposition and heat transfer characteristics on the convective heating surface of calcium‐rich Zhundong coal combustion in a 0.4‐MWth facility".
Published in:
2023
Publication type:
Correction Notice
Measurements and predictions of phase equilibria in quinary system NaCl + KCl + MgCl2 + SrCl2 + H2O (saturated with NaCl) at 308.2 K.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2956
By:
- Sang, Shi‐Hua;
- Yang, Xiao‐Jun;
- Feng, Zhen‐Hua;
- Tang, Bin‐Bin;
- Cen, Yu‐Qiu;
- Gao, Yun‐Yun
Publication type:
Article
Application of molecular dynamics simulations in interface interaction of clay: Current status and perspectives.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2955
By:
- Chen, Jun;
- Chu, Xinxia;
- Cheng, Yali;
- Shu, Qingdong;
- Ling, Yunjia;
- Shang, Huanhuan;
- Min, Fanfei
Publication type:
Article
Green synthesis of titanium nanoparticles using a sustainable microalgal metabolite solution for potential biotechnological activities.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2954
By:
- Mutaf, Tugce;
- Caliskan, Gulizar;
- Ozel, Hulki;
- Akagac, Gulsah;
- Öncel, Suphi Ş.;
- Elibol, Murat
Publication type:
Article
Bioleaching of oceanic manganese nodules: Current progress and future prospects.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2953
By:
- Xue, Zhonghua;
- Feng, Yali;
- Li, Haoran;
- Xu, Chenglong;
- Ju, Jinrong
Publication type:
Article
The preparation of anti‐fouling dual‐layer composite membrane with embedding graphene oxide.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2949
By:
- Xu, Xinyue;
- Wang, Qian;
- Zhu, Xue;
- Wu, Qigang;
- Zheng, Tao;
- Yuan, Haoran;
- Zhou, Zhengzhong
Publication type:
Article
Thermodynamic investigation on low GWP drop‐in alternatives to HFC‐245fa in ejector refrigeration cycle for air condition application.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2948
By:
- Hao, Xinyue;
- Gao, Neng;
- Wang, Xuehui;
- Li, Nian;
- Chen, Guangming;
- Wang, Qin
Publication type:
Article
Experimental study of solid circulation rate and pressure distribution characteristics in a cold fluidized bed with an external heat exchanger in an municipal solid waste incinerator.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2946
By:
- Wei, Bangji;
- Zheng, Lin;
- Lv, Guojun;
- Meng, Xiangfei;
- Huang, Qunxing;
- Jiang, Xuguang
Publication type:
Article
Optimization of mechanical and thermal properties of hybrid styrene‐butadiene rubber/nanoclay/graphite nanocomposites.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2945
By:
- Mojaddami, Ameneh;
- Paydayesh, Azin
Publication type:
Article
Experimental study on gas–solid flow and heat transfer characteristics in downer moving bed.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2944
By:
- Zhang, Shuangming;
- Zhou, Tuo;
- Wu, Haowen;
- Zhang, Man;
- Zhu, Shahong;
- Yang, Hairui
Publication type:
Article
Apparent and true mineralization during combined electro‐oxidation and electro‐coagulation on stainless steel anode.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2940
By:
- Meena, Vinod Kumar;
- Ghatak, Himadri Roy
Publication type:
Article
Study on the thermal transformation of basic components of wind turbine blade.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2938
By:
- Ge, Lichao;
- Jiang, Han;
- Feng, Hongcui;
- Xu, Chunyao;
- Lu, Yanning;
- Li, Xi;
- Chen, Bo;
- Xu, Chang
Publication type:
Article
Organodiphosphonate Zr‐MOF: A highly efficient catalyst for Meerwein–Ponndorf–Verley reduction of furfural.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2937
By:
- Xia, Xinxin;
- Yu, Hongyang;
- Qin, Pindian;
- Dai, Mingyu;
- Jia, Lixue;
- Deng, Yi;
- Li, Cuiqin;
- Li, Feng
Publication type:
Article
Analysis of gas product changes during pyrolysis of oily sludge based on density functional theory calculation.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2935
By:
- Wen, Qian;
- Cheng, Wencai;
- Liu, Dujiang;
- Cui, Xiaoyi;
- Shao, Zhiguo;
- Xu, Shipei;
- He, Zhicheng;
- Lu, Xirui
Publication type:
Article
Influence of Oslo crystallizer structure characteristics on crystallization process.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2934
By:
- Chen, Zhirong;
- Xiang, Yanting;
- Cai, Weiling;
- Yuan, Shenfeng;
- Yin, Hong
Publication type:
Article
Effect of ethanol on selective oligomerization of isobutene and the simulation of reactive distillation process.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2933
By:
- Yu, Panhu;
- Luan, Chenghao;
- Cao, Min;
- Sun, Dahai;
- Tian, Hui
Publication type:
Article
Issue Information.
Published in:
Asia-Pacific Journal of Chemical Engineering, 2023, v. 18, n. 5, p. 1, doi. 10.1002/apj.2797
Publication type:
Article

Works matching IS 19322135 AND DT 2023 AND VI 18 AND IP 5

Study on the hydraulic classification characteristics of micron‐sized silica particles.

Numerical study on the effect of mass flux on the low frequency pressure oscillation occurred in oxygen jet condensation.

Management of physical and chemical water quality in Kotchener drain (Kafr El Sheikh, Egypt).

Effect of 915‐MHz low‐temperature microwave irradiation on the molecular structure of coking coal.

Nitrogen‐doped biochar as an efficient sensing material for the electrochemical detection of heavy metal ion Pb<sup>2+</sup> and Cd<sup>2+</sup>.

Preparation of MoS<sub>2</sub>/diesel dispersion nanofluid and its application in diluent blending‐viscosity reduction technology for heavy oil production.

Rheo‐kinetic study of 4‐(Dimethylsilyl) butyl ferrocene‐grafted HTPB‐based composite propellant and evaluation of casting rate.

Synthesis, characterization, and computational study of N‐protected amino acid inhibitors as well as assessment of corrosion resistance properties on mild steel in.5 M H<sub>2</sub>SO<sub>4</sub> solution.

Separation and thermal conversion of group components from medium‐low‐temperature coal tar pitch.

Correction to "Ash deposition and heat transfer characteristics on the convective heating surface of calcium‐rich Zhundong coal combustion in a 0.4‐MWth facility".

Measurements and predictions of phase equilibria in quinary system NaCl + KCl + MgCl<sub>2</sub> + SrCl<sub>2</sub> + H<sub>2</sub>O (saturated with NaCl) at 308.2 K.

Application of molecular dynamics simulations in interface interaction of clay: Current status and perspectives.

Green synthesis of titanium nanoparticles using a sustainable microalgal metabolite solution for potential biotechnological activities.

Bioleaching of oceanic manganese nodules: Current progress and future prospects.

The preparation of anti‐fouling dual‐layer composite membrane with embedding graphene oxide.

Thermodynamic investigation on low GWP drop‐in alternatives to HFC‐245fa in ejector refrigeration cycle for air condition application.

Experimental study of solid circulation rate and pressure distribution characteristics in a cold fluidized bed with an external heat exchanger in an municipal solid waste incinerator.

Optimization of mechanical and thermal properties of hybrid styrene‐butadiene rubber/nanoclay/graphite nanocomposites.

Experimental study on gas–solid flow and heat transfer characteristics in downer moving bed.

Apparent and true mineralization during combined electro‐oxidation and electro‐coagulation on stainless steel anode.

Study on the thermal transformation of basic components of wind turbine blade.

Organodiphosphonate Zr‐MOF: A highly efficient catalyst for Meerwein–Ponndorf–Verley reduction of furfural.

Analysis of gas product changes during pyrolysis of oily sludge based on density functional theory calculation.

Influence of Oslo crystallizer structure characteristics on crystallization process.

Effect of ethanol on selective oligomerization of isobutene and the simulation of reactive distillation process.

Issue Information.