Works matching IS 17366046 AND DT 2025 AND VI 74 AND IP 2

Results: 29

Combustion synthesis of silicon carbide by magnesio-carbothermic reduction of amorphous and crystalline silica.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 260, doi. 10.3176/proc.2025.2.31

By:

Kirakosyan, Hasmik;
Nazaretyan, Khachik;
Beglaryan, Hayk;
Ivanov, Roman;
Hussainova, Irina;
Aydinyan, Sofiya

Publication type:

Article

Comparative experimental analysis of wear behavior of CuCrZr and CuZn39Pb3 alloys using pin-on-disc test from room temperature to high temperatures.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 253, doi. 10.3176/proc.2025.2.30

By:

Cetintav, Isik;
Ceviz, Mehmet

Publication type:

Article

Effect of reinforcement ratio on contact angle in hydrophobic/superhydrophobic AA5754/SiCp composite materials.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 247, doi. 10.3176/proc.2025.2.29

By:

Pamukcu, Tunahan;
Taskin, Nilhan Urkmez

Publication type:

Article

Vibration control of a rotating exponentially axially functionally graded flexible beam.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 240, doi. 10.3176/proc.2025.2.28

By:

Aydogdu, Feza Eralp;
Uymaz, Bahar

Publication type:

Article

Ritz formulation for the wave propagation analysis of axially functionally graded carbon nanotubes.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 234, doi. 10.3176/proc.2025.2.27

By:

Arda, Mustafa;
Tosun, Tamer

Publication type:

Article

Virtual factory model development for AI-driven optimization in manufacturing.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 228, doi. 10.3176/proc.2025.2.26

By:

Raamets, Tõnis;
Karjust, Kristo;
Hermaste, Aigar;
Kelpman, Karolin

Publication type:

Article

Effect of silica precursor on the synthesis of Zn2SiO4-based material.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 217, doi. 10.3176/proc.2025.2.24

By:

Necib, Jallouli;
Hussainova, Irina;
Rojas-Hernandez, Rocío E.

Publication type:

Article

Situational awareness in autonomous shuttle buses.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 212, doi. 10.3176/proc.2025.2.23

By:

Kalda, Krister;
Koskinen, Kari M.;
Sarv, Lill;
Sell, Raivo

Publication type:

Article

Sustainability index development for industrial fashion SMEs.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 205, doi. 10.3176/proc.2025.2.22

By:

Banelienė, Rūta;
Strazdas, Rolandas;
Černevičiūtė, Jūratė

Publication type:

Article

Plasma-transferred arc-welded composite hardfacings with ZrB2 and TiC reinforcements.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 165, doi. 10.3176/proc.2025.2.15

By:

Melakh, Liudmyla;
Surzhenkov, Andrei;
Juhani, Kristjan;
Viljus, Mart;
Traksmaa, Rainer;
Vedel, Dmytro

Publication type:

Article

Assessment of the properties and structure of porous titanium samples via magnetic pulse compaction.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 186, doi. 10.3176/proc.2025.2.19

By:

Blumbergs, Ervins;
Mironovs, Viktors;
Nikitina, Jekaterina;
Maiorov, Michail;
Zemcenkovs, Vjaceslavs

Publication type:

Article

Application issues of additive manufacturing in plaster mold casting of metals.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 181, doi. 10.3176/proc.2025.2.18

By:

Pohlak, Meelis;
Sergejev, Fjodor;
Tähemaa, Toivo;
Saarna, Mart;
Viljus, Mart;
Hermaste, Aigar

Publication type:

Article

Addressing security issues in Industry 4.0 through quantum key distribution.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 175, doi. 10.3176/proc.2025.2.17

By:

Auriemma, Fabio;
Ejrnaes, Mikkel

Publication type:

Article

Effect of high chromium content additions in iron-bonded Ti(C,N) cermets: a hardness-toughness tradeoff.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 170, doi. 10.3176/proc.2025.2.16

By:

Pampori, Tabeen Halawat;
Kolnes, Märt;
Juhani, Kristjan;
Tarraste, Marek;
Kübarsepp, Jakob

Publication type:

Article

From scrap to product: the effect of recycled tungsten carbide and alumina content on the mechanical properties of oxide-carbide duplex ceramic composite.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 192, doi. 10.3176/proc.2025.2.20

By:

Kariminejad, Arash;
Klimczyk, Piotr;
Antonov, Maksim;
Hussainova, Irina

Publication type:

Article

Lean in universities: assessing practicality across university functions.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 160, doi. 10.3176/proc.2025.2.14

By:

Kristjuhan-Ling, Kadri;
Mahmood, Kashif

Publication type:

Article

An overview of smart workplace solutions and potential improvement areas.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 155, doi. 10.3176/proc.2025.2.13

By:

Kelpman, Karolin;
Karjust, Kristo;
Majak, Jüri

Publication type:

Article

Smart monitoring of the expansion state of boiler water walls in coal-fired power plants using a digital twin model.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 149, doi. 10.3176/proc.2025.2.12

By:

Lijia Luo;
Weida Wang;
Zhenheng Lei;
Shiyi Bao;
Bassir, David;
Gongfa Chen

Publication type:

Article

Overview of the development of cybersecurity in data transmission protocols used in industry.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 143, doi. 10.3176/proc.2025.2.11

By:

Ponomar, Sergei;
Sarkans, Martinš

Publication type:

Article

Human-robot interaction: a conceptual framework for safety/risk analysis.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 137, doi. 10.3176/proc.2025.2.09

By:

Matsulevitš, Johannes;
Majak, Jüri;
Eerme, Martin;
Sarkans, Martinš;
Dunajeva, Olga;
Kristjuhan-Ling, Kadri;
Raamets, Tõnis;
Kekšin, Vjatšeslav

Publication type:

Article

Effect of carbon content on the microstructure and phases of (Ti,V,Nb,Cr,Mo)Cx high-entropy carbide.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 132, doi. 10.3176/proc.2025.2.08

By:

Anwar, Furqan;
Tarraste, Marek;
Berger, Lutz-Michael;
Pötschke, Johannes

Publication type:

Article

Methodology for the measurement and estimation of pedestrian and cycle traffic at level crossings.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 126, doi. 10.3176/proc.2025.2.07

By:

Jairus, Tanel;
Metlitski, Stanislav;
Kask, Mihkel;
Kõrbe, Kati

Publication type:

Article

Numerical modeling of fragment flight dynamics.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 120, doi. 10.3176/proc.2025.2.06

By:

Kivistik, Lenart;
Mehrparvar, Marmar;
Eerme, Martin;
Dieves, Veiko;
Majak, Jüri

Publication type:

Article

Development of a PDMS/ZnO/Gr piezoelectric tactile sensor and its exploration in intelligent applications.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 115, doi. 10.3176/proc.2025.2.05

By:

Qinhua Hu;
Tingxuan Chen;
Liang Shen;
Wenhui Lu;
Wei Tao;
Lijuan Zhang;
Ling Yin;
Bassir, David

Publication type:

Article

Investigation of static behavior of functionally graded porous sandwich beams with TPMS core.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 109, doi. 10.3176/proc.2025.2.04

By:

Solar, Caner;
Demirhan, Pinar Aydan;
Taskin, Vedat

Publication type:

Article

A workflow for extended reality-based learning in engineering education.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 103, doi. 10.3176/proc.2025.2.03

By:

Pizzagalli, Simone Luca;
Mahmood, Kashif;
Boychuk, Rostyslav;
Otto, Tauno;
Kuts, Vladimir

Publication type:

Article

Understanding twin transition dynamics in the Estonian metal manufacturing industry.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 98, doi. 10.3176/proc.2025.2.02

By:

Abilakimova, Anar;
Bauters, Merja

Publication type:

Article

Risk assessment of machinery supported by the Bayesian approach.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 92, doi. 10.3176/proc.2025.2.01

By:

Sivitski, Alina;
Põdra, Priit

Publication type:

Article

Foreword.

Published in:

Proceedings of the Estonian Academy of Sciences, 2025, v. 74, n. 2, p. 91, doi. 10.3176/proc.2025.2.10

By:

Karjust, Kristo

Publication type:

Article

Works matching IS 17366046 AND DT 2025 AND VI 74 AND IP 2

Combustion synthesis of silicon carbide by magnesio-carbothermic reduction of amorphous and crystalline silica.

Comparative experimental analysis of wear behavior of CuCrZr and CuZn39Pb3 alloys using pin-on-disc test from room temperature to high temperatures.

Effect of reinforcement ratio on contact angle in hydrophobic/superhydrophobic AA5754/SiCp composite materials.

Vibration control of a rotating exponentially axially functionally graded flexible beam.

Ritz formulation for the wave propagation analysis of axially functionally graded carbon nanotubes.

Virtual factory model development for AI-driven optimization in manufacturing.

Effect of silica precursor on the synthesis of Zn<sub>2</sub>SiO<sub>4</sub>-based material.

Situational awareness in autonomous shuttle buses.

Sustainability index development for industrial fashion SMEs.

Plasma-transferred arc-welded composite hardfacings with ZrB<sub>2</sub> and TiC reinforcements.

Assessment of the properties and structure of porous titanium samples via magnetic pulse compaction.

Application issues of additive manufacturing in plaster mold casting of metals.

Addressing security issues in Industry 4.0 through quantum key distribution.

Effect of high chromium content additions in iron-bonded Ti(C,N) cermets: a hardness-toughness tradeoff.

From scrap to product: the effect of recycled tungsten carbide and alumina content on the mechanical properties of oxide-carbide duplex ceramic composite.

Lean in universities: assessing practicality across university functions.

An overview of smart workplace solutions and potential improvement areas.

Smart monitoring of the expansion state of boiler water walls in coal-fired power plants using a digital twin model.

Overview of the development of cybersecurity in data transmission protocols used in industry.

Human-robot interaction: a conceptual framework for safety/risk analysis.

Effect of carbon content on the microstructure and phases of (Ti,V,Nb,Cr,Mo)Cx high-entropy carbide.

Methodology for the measurement and estimation of pedestrian and cycle traffic at level crossings.

Numerical modeling of fragment flight dynamics.

Development of a PDMS/ZnO/Gr piezoelectric tactile sensor and its exploration in intelligent applications.

Investigation of static behavior of functionally graded porous sandwich beams with TPMS core.

A workflow for extended reality-based learning in engineering education.

Understanding twin transition dynamics in the Estonian metal manufacturing industry.

Risk assessment of machinery supported by the Bayesian approach.

Foreword.