Found: 69
Select item for more details and to access through your institution.
EFFECT OF ADDITIVES ON THE DENSIFICATION PROCESSES AND PROPERTIES OF SILICA-BASED CMCs.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1485, doi. 10.24425/123835
- By:
- Publication type:
- Article
MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AA1050/ AA6061/AA1050 MULTI-LAYER SHEET FABRICATED BY COLD ROLL BONDING PROCESS.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1489, doi. 10.24425/123836
- By:
- Publication type:
- Article
FABRICATION OF POROUS SILICA FIBERS BY ELECTROSPINNING FOR SOUND ABSORBING MATERIALS.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1497, doi. 10.24425/123838
- By:
- Publication type:
- Article
COMBINED EFFECT OF Zr AND Si ON ISOTHERMAL OXIDATION OF Ti.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1493, doi. 10.24425/123837
- By:
- Publication type:
- Article
EFFECT OF BISMUTH AND RARE EARTH ELEMENTS ON GRAPHITE STRUCTURE IN DIFFERENT SECTION THICKNESSES OF SPHEROIDAL GRAPHITE CAST IRON CASTINGS.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1547, doi. 10.24425/123846
- By:
- Publication type:
- Article
PATTERN SELECTION IN THE FRAME OF THERMODYNAMIC SIMILARITY BETWEEN EUTECTICS: Cu-Cu<sub>2</sub>O AND (Zn)-Zn<sub>16</sub>Ti - EXPERIMENT.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1555, doi. 10.24425/123847
- By:
- Publication type:
- Article
EFFECT OF COBALT ALUMINATE CONTENT AND POURING TEMPERATURE ON MACROSTRUCTURE, TENSILE STRENGTH AND CREEP RUPTURE OF INCONEL 713C CASTINGS.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1537, doi. 10.24425/123845
- By:
- Publication type:
- Article
THE SITE PREFERENCE ANALYSIS AND ORDERING CHARACTERISTICS OF TERNARY Cu<sub>0.5</sub>(Zn<sub>1-x</sub>M<sub>x</sub>)<sub>0.5</sub> (M = TRANSITION METALS) ALLOYS.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1531, doi. 10.24425/123844
- By:
- Publication type:
- Article
THE FUSION CHARACTERISTICS OF ASHES FROM LIGNIN AND THE COKE BREEZE.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1523, doi. 10.24425/123843
- By:
- Publication type:
- Article
ELECTROCATALYTICAL PROPERTIES OF PALLADIUM-DECORATED COBALT COATINGS OBTAINED BY ELECTRODEPOSITION AND GALVANIC DISPLACMENT.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1517, doi. 10.24425/123842
- By:
- Publication type:
- Article
ENHANCED MICROWAVE ABSORPTION OF CNT COMPOSITES MIXING WITH Fe<sub>3</sub>O<sub>4</sub> AND CARBONYL IRON.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1513, doi. 10.24425/123841
- By:
- Publication type:
- Article
EFFECT OF Fe CONTENT ON THE CONTACT RESISTANCE OF ELECTROPLATED Au-Fe ALLOY LAYERS.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1503, doi. 10.24425/123839
- By:
- Publication type:
- Article
FABRICATION OF Mo-Si-B INTERMETALLIC COMPOUND POWDERS UNDER DIFFERENT HEAT TREATMENT CONDITIONS.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1509, doi. 10.24425/123840
- By:
- Publication type:
- Article
INFLUENCE OF THE CALCINATION TEMPERATURE ON THE OPTICAL AND MECHANICAL PROPERTIES OF Y<sub>2</sub>O<sub>3</sub>-MgO NANOCOMPOSITES.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1481, doi. 10.24425/123834
- By:
- Publication type:
- Article
EFFECT OF Ni CONTENT ON THE AUSTENITE STABILITY AND MECHANICAL PROPERTIES OF NANOCRYSTALLINE Fe-Ni ALLOY FABRICATED BY SPARK PLASMA SINTERING.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1477, doi. 10.24425/123833
- By:
- Publication type:
- Article
HOT PRESSED K<sub>0.5</sub>Na<sub>0.5</sub>NbO<sub>3</sub> MATERIAL FOR PIEZOELECTRIC TRANSFORMER FOR ENERGY HARVESTING.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1275, doi. 10.24425/123801
- By:
- Publication type:
- Article
MICROSTRUCTURE AND CORROSION BEHAVIORS OF BIODEGRADABLE Mg-1Zn-1Zr-xSn ALLOYS PREPARED BY POWDER-IN-TUBE ROLLING.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1467, doi. 10.24425/123831
- By:
- Publication type:
- Article
MANUFACTURING AND MACROSCOPIC PROPERTIES OF Y<sub>2</sub>O<sub>3</sub> COATING LAYER ON CERAMIC (AlN) SUBSTRATE FABRICATED BY AEROSOL DEPOSITION.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1463, doi. 10.24425/123829
- By:
- Publication type:
- Article
EFFECTS OF PVA POLYMER TYPE AND CALCINATION TEMPERATURE ON SYNTHESIS OF NANOCRYSTALLINE YTTRIA POWDER BY POLYMER SOLUTION ROUTE.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1473, doi. 10.24425/123832
- By:
- Publication type:
- Article
EXAMINATION OF THE PROPERTIES OF SAMPLES FROM GLASS-EPOXY CORE RODS FOR COMPOSITE INSULATORS SUBJECTED TO DC HIGH VOLTAGE.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1281, doi. 10.24425/123802
- By:
- Publication type:
- Article
INFLUENCE OF STERILIZATION AND EXPOSURE TO THE RINGER'S SOLUTION ON MECHANICAL AND PHYSICOCHEMICAL PROPERTIES OF NITROCARBURIZED 316 LVM STEEL.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1257, doi. 10.24425/123799
- By:
- Publication type:
- Article
INVESTIGATION OF MICROSTRUCTURES AND MECHANICAL PROPERTIES OF T92 MARTENSITIC STEEL/SUPER304 AUSTENITIC STEEL WELD JOINTS MADE WITH THREE WELDING CONSUMABLES.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1249, doi. 10.24425/123798
- By:
- Publication type:
- Article
MICROSTRUCTURE AND DEGREE OF DEGRADATION OF ZnO VARISTORS IN SURGE ARRESTERS DUE TO OPERATION.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1267, doi. 10.24425/123800
- By:
- Publication type:
- Article
MICROSTRUCTURE AND COMPRESSION PROPERTIES OF Fe-Cr-B ALLOY MANUFACTURED USING LASER METAL DEPOSITION.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1459, doi. 10.24425/123828
- By:
- Publication type:
- Article
FORMATION OF DIFFERENT Cu NANOPOWDERS AND STABILITY OF Cu FLUIDS PRODUCED BY ELECTRICAL EXPLOSION OF WIRE IN LIQUID.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1453, doi. 10.24425/123827
- By:
- Publication type:
- Article
STUDY ON CRYSTAL STRUCTURE AND MAGNETIC PROPERTIES OF Ba<sub>4</sub>Co<sub>2</sub>Fe<sub>36</sub>O<sub>60</sub> BY SOL-GEL METHOD.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1449, doi. 10.24425/123826
- By:
- Publication type:
- Article
PREPARATION OF NICKEL POWDERS BY REDUCTION OF NICKEL HYDROXIDE USING THE TAYLOR FLUID FLOW.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1443, doi. 10.24425/123825
- By:
- Publication type:
- Article
QUANTITATIVE ANALYSIS OF CRYOMILLED NANOCRYSTALLINE Ti-6Al-4V ALLOY POWDER BY X-RAY DIFFRACTION.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1439, doi. 10.24425/123824
- By:
- Publication type:
- Article
MULTISTEP HEAT-TREATMENT EFFECTS ON ELECTROSPUN Nd-Fe-B-O NANOFIBERS.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1433, doi. 10.24425/123823
- By:
- Publication type:
- Article
MICROSTRUCTURE DEVELOPMENT OF SPARK PLASMA SINTERED Ti-Nb ALLOY BY HEAT TREATMENT.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1429, doi. 10.24425/123822
- By:
- Publication type:
- Article
THE USE OF PLASTIC WORKING ALLOYS FeAl TO PERFORM CONTROLS ELEMENTS OF TURBOCHARGER IN DIESEL ENGINE.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1423, doi. 10.24425/123821
- By:
- Publication type:
- Article
PREDICTION OF TRIBOCORROSIVE PROPERTIES OF ADI CONTAINING Ni-Cu-Mo.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1417, doi. 10.24425/123820
- By:
- Publication type:
- Article
NICKELIZATION EFFECT ON THE HIGH TEMPERATURE TENSILE PROPERTIES OF Mg-0.7Y<sub>2</sub>O<sub>3</sub> NANOCOMPOSITE.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1411, doi. 10.24425/123819
- By:
- Publication type:
- Article
TECHNOLOGY AND ELECTROPHYSICAL PROPERTIES OF THE (K<sub>0.44</sub>Na<sub>0.52</sub>Li<sub>0.04</sub>)NbO<sub>3</sub> CERAMICS DOPED BY Cr<sup>3+</sup>, Zn<sup>2+</sup>, Sb<sup>3+</sup> OR Fe<sup>3+</sup>.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1401, doi. 10.24425/123818
- By:
- Publication type:
- Article
DENSE ALUMINA CERAMICS OBTAINED BY GELCASTING AND COLD ISOSTATIC PRESSING WITH THE USE OF 2-CARBOXYETHYL ACRYLATE.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1393, doi. 10.24425/123817
- By:
- Publication type:
- Article
NUMERICAL ANALYSIS OF TWIST EXTRUSION PRESSING OF Al-Mg-Mn-Sc-Zr SCA LMALLOY.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1385, doi. 10.24425/123816
- By:
- Publication type:
- Article
GRAPHENE-BASED COMPOSITE MEMBRANE FOR WATER DESALINATION.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1379, doi. 10.24425/123815
- By:
- Publication type:
- Article
INFLUENCE OF CHEMICAL COMPOSITION ON THE PROPERTIES OF EXPERIMENTAL SILICONE-BASED SOFT LINING COMPOSITES.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1371, doi. 10.24425/123814
- By:
- Publication type:
- Article
EFFECTS OF DIFFERENT INORGANIC FILLERS ON MECHANICAL PROPERTIES AND DEGREE OF CONVERSION OF DENTAL RESIN COMPOSITES.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1361, doi. 10.24425/123813
- By:
- Publication type:
- Article
COOLING CHARACTERISTIC AND MICROSTRUCTURE OF Ni-Si-B-Ag ALLOY.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1357, doi. 10.24425/123812
- By:
- Publication type:
- Article
INFLUENCE OF Dy DOPING ON THE PROPERTIES OF BiFeO<sub>3</sub>.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1351, doi. 10.24425/123811
- By:
- Publication type:
- Article
THE EFFECT OF NON-METALLIC INCLUSIONS FORMED AS A RESULT OF DEOXIDATION ON THE FATIGUE STRENGTH OF 15CrNi6 AND 16MnCr5 STEEL.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1345, doi. 10.24425/123810
- By:
- Publication type:
- Article
STRUCTURE AND ELECTRICAL RESISTIVITY DEPENDENCE OF MOLYBDENUM THIN FILMS DEPOSITED BY DC MODULATED PULSED MAGNETRON SPUTTERING.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1339, doi. 10.24425/123809
- By:
- Publication type:
- Article
CASTING TECHNOLOGY EXPERIMENT AND COMPUTER MODELING OF ORNAMENTS FROM BRONZE AGE.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1329, doi. 10.24425/123808
- By:
- Publication type:
- Article
STRUCTURE AND PROPERTIES OF LIGHTWEIGHT CERAMIC AGGREGATES BASED ON LOCAL SILESIAN WASTE MATERIALS.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1321, doi. 10.24425/123807
- By:
- Publication type:
- Article
CONTRIBUTION OF DIFFERENT HARDENING MECHANISMS DURING COLD WORKING OF AISI 304L AUSTENITIC STAINLESS STEEL.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1317, doi. 10.24425/123806
- By:
- Publication type:
- Article
MODELLING OF Cr<sub>3</sub>C<sub>2</sub>-25% NiCr LASER ALLOYED CAST IRON IN HIGH TEMPERATURE SLIDING WEAR CONDITION USING RESPONSE SURFACE METHODOLOGY.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1303, doi. 10.24425/123805
- By:
- Publication type:
- Article
INFLUENCE OF Sr<sup>2+</sup> DOPANT ON MICROSTRUCTURE AND ELECTRIC PROPERTIES OF (Ba<sub>0.85</sub>Ca<sub>0.15</sub>)(Zr<sub>0.1</sub>Ti<sub>0.9</sub>)O<sub>3</sub> (BCZT) CERAMICS.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1295, doi. 10.24425/123804
- By:
- Publication type:
- Article
STUDY OF GRAPHITE - POLYMER - TURBOSTRATIC CARBON COMPOSITES BY ACOUSTIC EMISSION METHOD AT PERPENDICULAR GEOMETRY.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1287, doi. 10.24425/123803
- By:
- Publication type:
- Article
THE MAGNETIC AND ELECTRIC MEASUREMENTS OF THE MULTIFERROIC PbFe<sub>1/2</sub>Nb<sub>1/2</sub>O<sub>3</sub> CERAMICS OBTAINED USING HOT UNIAXIAL PRESSURE METHOD.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 3, p. 1243, doi. 10.24425/123797
- By:
- Publication type:
- Article