Works in Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, Vol 86B, Issue 2

Results: 35

Properties of an injectable low modulus PMMA bone cement for osteoporotic bone.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 474, doi. 10.1002/jbm.b.31044

By:

Boger, Andreas;
Bohner, Marc;
Heini, Paul;
Verrier, Sophie;
Schneider, Erich

Publication type:

Article

Estimation of shelf life of natural rubber latex exam‐gloves based on creep behavior.

Published in:

2008

By:

Sarkar Das, Srilekha;
Shroeder, LeRoy W.

Publication type:

Correction Notice

Selection of a practical assay for the determination of the entire range of acetyl content in chitin and chitosan: UV spectrophotometry with phosphoric acid as solvent.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 558, doi. 10.1002/jbm.b.31056

By:

Hein, San;
Ng, Chuen‐How;
Stevens, Willem F.;
Wang, Kean

Publication type:

Article

The role of hydroxyapatite as solid signal on performance of PCL porous scaffolds for bone tissue regeneration.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 548, doi. 10.1002/jbm.b.31055

By:

Guarino, Vincenzo;
Causa, Filippo;
Netti, Paolo A.;
Ciapetti, Gabriela;
Pagani, Stefania;
Martini, Desiree;
Baldini, Nicola;
Ambrosio, Luigi

Publication type:

Article

Effect of porosity and pore size on microstructures and mechanical properties of poly‐ε‐caprolactone‐ hydroxyapatite composites.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 541, doi. 10.1002/jbm.b.31054

By:

Yu, Haiying;
Matthew, Howard W.;
Wooley, Paul H.;
Yang, Shang‐You

Publication type:

Article

Efficacy of titanium dioxide photocatalyst for inhibition of bacterial colonization on percutaneous implants.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 530, doi. 10.1002/jbm.b.31053

By:

Oka, Yoshinobu;
Kim, Wook‐Cheol;
Yoshida, Takashi;
Hirashima, Toshiko;
Mouri, Hisashi;
Urade, Hidenori;
Itoh, Yoshihisa;
Kubo, Toshikazu

Publication type:

Article

Evaluation of monomer leaching from a dual cured resin cement.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 523, doi. 10.1002/jbm.b.31052

By:

Altintas, Subutay Han;
Usumez, Aslihan

Publication type:

Article

Freeze casting of porous hydroxyapatite scaffolds. II. Sintering, microstructure, and mechanical behavior.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 514, doi. 10.1002/jbm.b.31051

By:

Fu, Qiang;
Rahaman, Mohamed N.;
Dogan, Fatih;
Bal, B. Sonny

Publication type:

Article

Antimicrobial activity and local release characteristics of chlorhexidine diacetate loaded within the dental copolymer matrix, ethylene vinyl acetate.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 506, doi. 10.1002/jbm.b.31049

By:

Arnold, Roland R.;
Wei, Hong Hong;
Simmons, Eric;
Tallury, Padmavathy;
Barrow, David A.;
Kalachandra, Sid

Publication type:

Article

Wear particle analysis of highly crosslinked polyethylene isolated from a failed total hip arthroplasty.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 501, doi. 10.1002/jbm.b.31048

By:

Minoda, Yukihide;
Kobayashi, Akio;
Sakawa, Akira;
Aihara, Masaharu;
Tada, Koichi;
Sugama, Ryo;
Iwakiri, Kentaro;
Ohashi, Hirotsugu;
Takaoka, Kunio

Publication type:

Article

Swelling characteristics and drug delivery properties of nifedipine‐loaded pH sensitive alginate–chitosan hydrogel beads.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 493, doi. 10.1002/jbm.b.31046

By:

Dai, Ya‐Ni;
Li, Ping;
Zhang, Jun‐Ping;
Wang, Ai‐Qin;
Wei, Qin

Publication type:

Article

Contact‐free determination of material characteristics using a newly developed pressure‐operated strain‐applying bioreactor.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 483, doi. 10.1002/jbm.b.31045

By:

Schumann, Stefan;
Stahl, Claudius A.;
Möller, Knut;
Schneider, Matthias;
Metzke, Robert;
Wall, Wolfgang A.;
Priebe, Hans‐Joachim;
Guttmann, Josef

Publication type:

Article

Synthesis and characterization of polymeric implant for kyphoplasty.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 466, doi. 10.1002/jbm.b.31043

By:

Mizrahi, Boaz;
Shavit, Ronen;
Domb, Abraham

Publication type:

Article

The effect of the environment on the mechanical properties of medical grade silicones.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 460, doi. 10.1002/jbm.b.31042

By:

Leslie, L. J.;
Jenkins, M. J.;
Shepherd, D. E. T.;
Kukureka, S. N.

Publication type:

Article

Bone formation and resorption in patients after implantation of β‐tricalcium phosphate blocks with 60% and 75% porosity in opening‐wedge high tibial osteotomy.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 453, doi. 10.1002/jbm.b.31041

By:

Tanaka, Takaaki;
Kumagae, Yoshio;
Saito, Mitsuru;
Chazono, Masaaki;
Komaki, Hirokazu;
Kikuchi, Takahiro;
Kitasato, Seiichiro;
Marumo, Keishi

Publication type:

Article

Anisotropic polyvinyl alcohol—Bacterial cellulose nanocomposite for biomedical applications.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 444, doi. 10.1002/jbm.b.31040

By:

Millon, Leonardo E.;
Guhados, Ganesh;
Wan, Wankei

Publication type:

Article

Thin films of oriented collagen fibrils for cell motility studies.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 438, doi. 10.1002/jbm.b.31039

By:

Amyot, Franck;
Small, Alex;
Boukari, Hacène;
Sackett, Dan;
Elliott, John;
McDaniel, Dennis;
Plant, Anne;
Gandjbakhche, Amir

Publication type:

Article

Stress corrosion cracking of an aluminum alloy used in external fixation devices.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 430, doi. 10.1002/jbm.b.31038

By:

Cartner, Jacob L.;
Haggard, Warren O.;
Ong, Joo L.;
Bumgardner, Joel D.

Publication type:

Article

Inhibition of mineralization by a calcium zirconium phosphate coating.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 422, doi. 10.1002/jbm.b.31037

By:

Bernstein, Anke;
Nöbel, Doreen;
Mayr, Hermann O.;
Göbel, Felix;
Berger, Georg;
Ploska, Ute;
Gildenhaar, Renate;
Brandt, Jörg

Publication type:

Article

A biomechanical and histological analysis of standard versus hydroxyapatite‐coated pins for external fixation.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 417, doi. 10.1002/jbm.b.31036

By:

Moroni, Antonio;
Cadossi, Matteo;
Romagnoli, Matteo;
Faldini, Cesare;
Giannini, Sandro

Publication type:

Article

The effect of surface treatments on the fretting behavior of Ti‐6Al‐4V alloy.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 407, doi. 10.1002/jbm.b.31034

By:

Dalmiglio, Matteo;
Schaaff, Petra;
Holzwarth, Uwe;
Chiesa, Roberto;
Rondelli, Gianni

Publication type:

Article

Solvent/non‐solvent sintering: A novel route to create porous microsphere scaffolds for tissue regeneration.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 396, doi. 10.1002/jbm.b.31033

By:

Brown, Justin L.;
Nair, Lakshmi S.;
Laurencin, Cato T.

Publication type:

Article

Metal ion release from fracture fixation devices: A potential marker of implant failure.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 389, doi. 10.1002/jbm.b.31032

By:

Savarino, L.;
Maci, G. S.;
Greco, M.;
Baldini, N.;
Giunti, A.

Publication type:

Article

Hybrid coating of hydroxyapatite and collagen within poly(D,L‐lactic‐co‐glycolic acid) scaffold.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 381, doi. 10.1002/jbm.b.31031

By:

Li, Jiashen;
Yuan, Xiaoyan;
He, Fei;
Mak, Arthur F. T.

Publication type:

Article

Assessment of tissue repair in full thickness chondral defects in the rabbit using magnetic resonance imaging transverse relaxation measurements.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 375, doi. 10.1002/jbm.b.31030

By:

Ramaswamy, Sharan;
Gurkan, Ilksen;
Sharma, Blanka;
Cascio, Brett;
Fishbein, Kenneth W.;
Spencer, Richard G.

Publication type:

Article

Fibroblast growth factor‐2‐apatite composite layers on titanium screw to reduce pin tract infection rate.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 365, doi. 10.1002/jbm.b.31029

By:

Mutsuzaki, Hirotaka;
Ito, Atsuo;
Sakane, Masataka;
Sogo, Yu;
Oyane, Ayako;
Ochiai, Naoyuki

Publication type:

Article

Materials, fluid dynamics, and solid mechanics aspects of coronary artery stents: A state‐of‐the‐art review.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 569, doi. 10.1002/jbm.b.31028

By:

Lewis, Gladius

Publication type:

Article

Cumulative effect of disinfection procedures on microhardness and tridimensional stability of a poly(methyl methacrylate) denture base resin.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 360, doi. 10.1002/jbm.b.31027

By:

Sartori, Evandro Afonso;
Schmidt, Caroline Bom;
Mota, Eduardo Gonçalves;
Hirakata, Luciana Mayumi;
Shinkai, Rosemary Sadami Arai

Publication type:

Article

Prevention of postoperative adhesions by a novel honeycomb‐patterned poly(lactide) film in a rat experimental model.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 353, doi. 10.1002/jbm.b.31026

By:

Fukuhira, Yukako;
Ito, Masaya;
Kaneko, Hiroaki;
Sumi, Yoshihiko;
Tanaka, Masaru;
Yamamoto, Sadaaki;
Shimomura, Masatsugu

Publication type:

Article

Preparation of a bonelike apatite–polymer fiber composite using a simple biomimetic process.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 341, doi. 10.1002/jbm.b.31025

By:

Yokoyama, Yoshiro;
Oyane, Ayako;
Ito, Atsuo

Publication type:

Article

The electrochemical behavior and surface analysis of Ti49.6Ni45.1Cu5Cr0.3 alloy for orthodontic usage.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 335, doi. 10.1002/jbm.b.31023

By:

Zheng, Y.‐F.;
Wang, Q. Y.;
Li, L.

Publication type:

Article

Changes in stiffness of demineralized dentin following application of collagen crosslinkers.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 330, doi. 10.1002/jbm.b.31022

By:

Bedran‐Russo, Ana Karina B.;
Pashley, David H.;
Agee, Kelli;
Drummond, James L.;
Miescke, Klaus J.

Publication type:

Article

Adhesion of a self‐etching system to dental substrate prepared by Er:YAG laser or air abrasion.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 321, doi. 10.1002/jbm.b.31020

By:

Souza‐Zaroni, Wanessa C.;
Chinelatti, Michelle A.;
Delfino, Carina S.;
Pécora, Jesus D.;
Palma‐Dibb, Regina G.;
Corona, Silmara A. M.

Publication type:

Article

Influences of passivating elements on the corrosion and biocompatibility of super stainless steels.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 310, doi. 10.1002/jbm.b.31018

By:

Yoo, Young‐Ran;
Jang, Soon‐Geun;
Oh, Keun‐Taek;
Kim, Jung‐Gu;
Kim, Young‐Sik

Publication type:

Article

Effect of temporary filling materials on repair bond strengths of composite resins.

Published in:

Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2008, v. 86B, n. 2, p. 303, doi. 10.1002/jbm.b.31017

By:

Erdemir, Ali;
Eldeniz, Ayce Unverdi;
Belli, Sema

Publication type:

Article