Works matching IS 1546542X AND DT 2024 AND VI 21 AND IP 4

Results: 48

Porous Ti3AlC2 MAX phase enables efficient synthesis of Ti3C2Tx MXene.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2605, doi. 10.1111/ijac.14671

By:

Roslyk, Iryna;
Baginskiy, Ivan;
Zahorodna, Veronika;
Gogotsi, Oleksiy;
Ippolito, Stefano;
Gogotsi, Yury

Publication type:

Article

Convenient preparation of calcium hexaluminate based castables with low thermal conductivity and sufficient strength.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2818, doi. 10.1111/ijac.14736

By:

Yang, Haizhen;
Luo, Wei;
Xia, Yufeng;
Ding, Cuijiao;
Zhao, Yi;
Xiang, Yunpan;
Yuan, Wenjie

Publication type:

Article

Innovative ceramic paste for stereolithography additive manufacturing alumina core applied in turbine blade casting.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2824, doi. 10.1111/ijac.14737

By:

Ye, Zhiwen;
Hao, Zongdong;
Dou, Rui;
Wang, Li;
Tang, Weizhe

Publication type:

Article

Material design using calculation phase diagram for refractory high‐entropy ceramic matrix composites.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2702, doi. 10.1111/ijac.14688

By:

Arai, Yutaro;
Saito, Manami;
Samizo, Akane;
Inoue, Ryo;
Nishio, Keishi;
Kogo, Yasuo

Publication type:

Article

Design, optimization, and verification of self‐lubricating ceramic tool microstructure by MC method.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 3048, doi. 10.1111/ijac.14735

By:

Zhu, Hang;
Zhang, Guangfu;
Chen, Zhaoqiang;
Huang, Yajun;
Tian, Congfeng;
Zhang, Ruwei;
Xu, Chonghai

Publication type:

Article

Contents.

Published in:: International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2579, doi. 10.1111/ijac.14810
Publication type:: Article

Advancement in ceramic biomaterials for dental implants.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2796, doi. 10.1111/ijac.14772

By:

Upadhyay, Anjali;
Pradhan, Lipi;
Yenurkar, Devyani;
Kumar, Kundan;
Mukherjee, Sudip

Publication type:

Article

Corrosion behavior of Al4SiC4/SiC ceramics exposed to molten calcium‐magnesium‐alumino‐silicate at 1350°C in air.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2784, doi. 10.1111/ijac.14760

By:

Tanaka, Atsuko;
Gubarevich, Anna;
Nishimura, Toshiyuki;
Yoshida, Katsumi

Publication type:

Article

Scintillation properties of transparent Lu‐α‐SiAlON:Ce3+ ceramics.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2671, doi. 10.1111/ijac.14758

By:

Aminaka, Kohei;
Tatami, Junichi;
Iijima, Motoyuki;
Ito, Akihiko;
Matsumoto, Shogen;
Takahashi, Takuma;
Ohji, Tatsuki

Publication type:

Article

Flash‐sintering behavior of the composites of 3YSZ and graphene oxide.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2850, doi. 10.1111/ijac.14751

By:

Singh, Abhijeet;
Singh, Chandan;
Chakrabarti, Tamoghna;
Yadav, Devinder

Publication type:

Article

Assembled a new composite and prepared the Pd@g‐C3N4/activated carbon electrocatalyst for HCOOH electrooxidation.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2883, doi. 10.1111/ijac.14750

By:

Saheli, Sania;
Rezvani, Ali Reza

Publication type:

Article

Enhanced structural stability of yttria‐stabilized zirconia–LaMgAl11O19 dual ceramic coating by an α‐Al2O3 layer.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2872, doi. 10.1111/ijac.14748

By:

Tao, Haotian;
Liu, Tianxin;
Yang, Sirui;
Hu, Suying;
Ma, Rui;
Xie, Zhiwen

Publication type:

Article

Fabrication, microstructure, and mechanical properties of novel three‐layer structured bionic ceramic cutting tools.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 3070, doi. 10.1111/ijac.14745

By:

Li, Shijie;
Huang, Chuanzhen;
Liu, Hanlian;
Shi, Zhenyu;
Ji, Lianggang;
Cui, Xinyao;
Du, Chongzhen;
Wang, Zhen;
Xu, Longhua;
Huang, Shuiquan

Publication type:

Article

Fabrication of silicon nitride with high thermal conductivity and flexural strength by hot‐pressing flowing sintering.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2841, doi. 10.1111/ijac.14741

By:

Li, Jianbin;
Jiang, Qiangguo;
Pan, Zhifeng;
Lv, Donglin;
Wu, Shanghua

Publication type:

Article

A comprehensive study of dielectric, modulus, impedance, and conductivity of SrCeO3 synthesized by the combustion method.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 3032, doi. 10.1111/ijac.14739

By:

Verma, Harish;
Tripathi, Arpita;
Upadhyay, Shail

Publication type:

Article

Synthesis of zeolite‐derived blue nanopigment and its modification for hydrophobic coating on ceramic tile.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2861, doi. 10.1111/ijac.14738

By:

Fatah, Salar K.;
Aminian, Mohsen Khajeh;
Bahamirian, Milad;
Mohammad, Ali M.;
Karim, Hoshyar B.;
Amin, Safin M.

Publication type:

Article

Phase purifying and dielectric improvement in Zn2SiO4 ceramics via simply controlling the particle size of SiO2.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 3024, doi. 10.1111/ijac.14734

By:

Xing, Zhuo;
Song, Julong;
Pan, Hong

Publication type:

Article

Fracture of all‐oxide ceramic composites: Crack path analysis by surface strain monitoring.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2663, doi. 10.1111/ijac.14624

By:

Janowski, Michaela;
Bock, Katrin;
Moosburger‐Will, Judith;
Koch, Dietmar

Publication type:

Article

Effects of pore size on electrical and thermal properties of porous SiC ceramics.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2651, doi. 10.1111/ijac.14620

By:

Das, Dulal;
Lucio, Maria Dolores Sosa;
Kultayeva, Shynar;
Kim, Young‐Wook

Publication type:

Article

Preparation and properties of ZrP2O7 matrix composites with high silica fibers reinforcement.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 3004, doi. 10.1111/ijac.14733

By:

Zhu, Zhipin;
Li, Yuanbing;
Li, Shujing;
Wei, Changdong;
Zhang, Rong

Publication type:

Article

Effect of the hydrotalcite formation on the fracture behavior and corrosion resistance of HA‐bonded alumina‐spinel castables.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2993, doi. 10.1111/ijac.14732

By:

Xu, Suchen;
Liu, Wenjing;
Liao, Ning;
Nath, Mithun;
Li, Yawei

Publication type:

Article

Electrothermal effect of carbon fiber and graphite reinforced metakaolin‐based geopolymer.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2976, doi. 10.1111/ijac.14731

By:

Zhang, Yajun;
Lin, Jialong;
Chen, Shikun;
Ruan, Shengqian;
Wang, Wenxin;
Liu, Yi;
Yan, Dongming

Publication type:

Article

Study of online tensile properties for continuous ceramic fibers under high‐temperature loads.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2933, doi. 10.1111/ijac.14730

By:

Zhang, Chi;
Jiang, Liquan;
Yu, Hao;
Zhu, Kunkun;
Xu, Weilin;
Li, Wenbin

Publication type:

Article

Highly stable CuFe1.2Al.8O4 catalyst with low CO selectivity for hydrogen production in HT‐PEMFCs application.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2896, doi. 10.1111/ijac.14729

By:

Shen, Qiuwan;
Chen, Gaokui;
Ren, Jinli;
Yan, Min;
Andersson, Martin;
Li, Shian

Publication type:

Article

Dielectric properties of polycrystalline and single‐crystal magnesium oxide at high temperatures.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 3016, doi. 10.1111/ijac.14728

By:

Devoe, Alan;
Trinh, Hung;
Dogan, Fatih

Publication type:

Article

Effect of Er2O3/MgO ratio on mechanical and thermal properties of Si3N4 ceramics.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2915, doi. 10.1111/ijac.14726

By:

Han, Zhuoqun;
Liu, Jia;
Wang, Weiwei;
Zhou, Qingxuan;
Zhao, Zhicheng;
Han, Yongning;
Wang, Yingying;
Wang, Yang;
Liu, Futian;
Li, Ling

Publication type:

Article

Enhancing heat dissipation in polyurethane sheets through the incorporation of freeze‐dried aluminum nitride nanofiber.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2955, doi. 10.1111/ijac.14725

By:

Hossain, Md. Shakhawat;
Nakane, Koji

Publication type:

Article

A new yellowish‐green‐emitting phosphor: Eu2+‐doped Ba3YAl2O7.5.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2923, doi. 10.1111/ijac.14724

By:

Sun, Bin;
Wang, Yiming;
Zhang, Huixian;
Wang, Linlin;
Liu, Mengyi;
Zhang, Chenxi

Publication type:

Article

Nuclear radiation shielding performance of the new lead‐free TeO2–Bi2O3–ZnO–BaF2 glass.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2906, doi. 10.1111/ijac.14723

By:

Yin, Shiyu;
Zhang, Zhizhi;
Xiang, Yu;
Qiao, Qianqian;
Ding, Guanzhou;
Huang, Xianchao;
Lin, Qiuhan

Publication type:

Article

Planetary ball milling induced piezocatalysis for dye degradation using Bi2VO5.5.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2832, doi. 10.1111/ijac.14721

By:

Kumar, Manish;
Kebaili, Imen;
Boukhris, Imed;
Vaish, Rahul

Publication type:

Article

Effect of TiO2 addition on microstructure and mechanical properties of Al2O3 ceramic joints brazed with Ag‐CuO fillers.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2944, doi. 10.1111/ijac.14720

By:

Yang, Mengjuan;
Zhao, Jian;
Hu, Shengpeng;
Zhou, Wenlong;
Zhou, Wei;
Fu, Wei;
Song, Xiaoguo

Publication type:

Article

Development of β‐SiAlON/12H composite and their cutting performance on Inconel 718 turning.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 3061, doi. 10.1111/ijac.14719

By:

Kula, Gökhan;
Kara, Ferhat

Publication type:

Article

Sintering of Si3N4–SiC–MoSi2 composites additively manufactured by Multi Material Jetting.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2613, doi. 10.1111/ijac.14715

By:

Zschippang, Eveline;
Kunz, Willy;
Weingarten, Steven;
Gottlieb, Lisa;
Wolfrum, Anne‐Kathrin

Publication type:

Article

In‐situ reaction sintered ReB2–B4C composite by reactive spark plasma sintering.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2636, doi. 10.1111/ijac.14713

By:

Long, Ying;
Wang, Shixuan;
Zhang, Guihao;
Lin, Hua‐Tay

Publication type:

Article

Effect of temperature on the healing capacity and mechanical properties of Ti2AlC MAX phase ceramics.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2757, doi. 10.1111/ijac.14704

By:

Suh, Minji;
Lee, Dong Heon;
Sloof, Willem G.;
Lee, Kee Sung

Publication type:

Article

Synthesis of highly disperse NbSi2–Si3N4 and Si3N4–NbN composite powders.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2596, doi. 10.1111/ijac.14683

By:

Lytvyn, Roman;
Kud, Iryna;
Myslyvchenko, Oleksandr;
Medyukh, Roman;
Krushynska, Larysa;
Zgalat‐Lozynskyy, Ostap

Publication type:

Article

Mechanical properties of SiCf/SiC composites with h‐BN interphase formed by the electrophoretic deposition method.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2730, doi. 10.1111/ijac.14687

By:

Yoshida, Katsumi;
Kasakura, Mayuko;
Gubarevich, Anna;
Kotani, Masaki

Publication type:

Article

Morphological and structural evaluation of spark plasma sintered calcium silicate ceramics.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2623, doi. 10.1111/ijac.14684

By:

Kaou, Maroua H.;
Furkó, Mónika;
Rachid, Ben Zine H.;
Balázsi, Katalin;
Balázsi, Csaba

Publication type:

Article

Phase equilibrium investigations and thermodynamic modeling of the HfO2–Ta2O5 system.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2583, doi. 10.1111/ijac.14648

By:

Löffler, Manuel;
Fabrichnaya, Olga

Publication type:

Article

Prediction of fatigue limit stress in C/SiC composites: Effect of stochastic load spectrum.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2771, doi. 10.1111/ijac.14674

By:

Li, Longbiao

Publication type:

Article

SiC‐bonded diamond ceramics for extreme conditions in subsea applications.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2690, doi. 10.1111/ijac.14664

By:

Kailer, Andreas;
Matthey, Björn;
Kunze, Steffen;
Herrmann, Mathias;
Tschirpke, Caroline

Publication type:

Article

Rapid synthesis of high‐yield Ti3AlC2 MAX phase powders from TiC0.67 and Al with induction heating assistance.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2712, doi. 10.1111/ijac.14661

By:

Gubarevich, Anna;
Miura, Kenshin;
Yoshida, Katsumi

Publication type:

Article

Wear characteristics of dual‐phase high‐entropy ceramics: Influence of the testing method.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2678, doi. 10.1111/ijac.14651

By:

Naughton‐Duszová, Annamária;
Medveď, Dávid;
Ďaková, Lenka;
Kovalčíková, Alexandra;
Švec, Peter;
Tatarko, Peter;
Ünsal, Hakan;
Hvizdoš, Pavol;
Šajgalík, Pavol;
Dusza, Ján

Publication type:

Article

Electrochemical performance and degradation mechanism of rechargeable aqueous Al2O3@Zn//MnO2 battery.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2720, doi. 10.1111/ijac.14642

By:

Lee, Sihyun;
So, Younghee;
Mhin, Sungwook

Publication type:

Article

Impact of fiber surface gas treatments on interfacial bonding in SiC/BN/SiC minicomposites.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2747, doi. 10.1111/ijac.14638

By:

Chanson, Charlotte;
Jouannigot, Stéphane;
Jacques, Sylvain

Publication type:

Article

Influence of ZrB2 on Si3N4 ceramics prepared by Si nitridation and hot‐pressing process.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2645, doi. 10.1111/ijac.14586

By:

Liang, Zhen‐Quan;
Zeng, Xian‐Ming;
Huang, Kun‐Heng;
Yu, Jun‐Jie;
Lin, Rui‐Lin;
Sun, Shi‐Kuan;
Guo, Wei‐Ming;
Lin, Hua‐Tay

Publication type:

Article

Evaluation of equi‐biaxial strength of thin sic coatings using ring‐on‐ring testing and digital image correlation.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2738, doi. 10.1111/ijac.14553

By:

Iwamoto, Sola;
Kondo, Sosuke;
Katsui, Hirokazu;
Shimoda, Kazuya;
Yu, Hao;
Ogino, Yasuyuki;
Kasada, Ryuta

Publication type:

Article

Surface corrosion mechanism of ceramic proppant caused by formation water.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 2968, doi. 10.1111/ijac.14532

By:

Hao, Jianying;
Chen, Jianing;
Liang, Tiancheng;
Wang, Shengchang

Publication type:

Article