Works matching IS 1546542X AND DT 2024 AND VI 21 AND IP 3

Results: 104

Contents.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1311, doi. 10.1111/ijac.14752
Publication type:
Article
Recycling of granite sludge for the preparation of high‐strength glazed glass‐ceramics using stepwise sintering.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1583, doi. 10.1111/ijac.14727
By:
- Lu, Jinshan;
- Liu, Changyou;
- Zhou, Jian
Publication type:
Article
Influence of SiC content in B4C–nSiC composites corrosion in molten FLiNaK salt at 800°C.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2404, doi. 10.1111/ijac.14722
By:
- Wang, Kui;
- Jia, Junhong;
- Chen, Wei;
- Hui, Junjie;
- He, Nairu;
- Ma, Shengqiang
Publication type:
Article
Effects of preform structure on microstructure and mechanical properties of long/short fiber‐coupled C/C–SiC composites.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1812, doi. 10.1111/ijac.14718
By:
- Ye, Zhiyong;
- Wang, Yalei;
- Xiong, Xiang;
- Wang, Jinming;
- Li, Tongqi;
- Liu, Huaifei;
- Liu, Zaidong;
- Wei, Yanbin
Publication type:
Article
Effects of graphene content in alkaline silicate electrolyte on AA1060 pure aluminum micro‐arc oxidation coating.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1789, doi. 10.1111/ijac.14717
By:
- Li, Da‐long;
- Jing, Xin;
- Chen, Han;
- Sun, Kun;
- Chen, Wei;
- Huang, Hua‐gui;
- Ren, Wei‐jie
Publication type:
Article
Hydration properties of magnesium phosphate cement paste mixed with metakaolin and silica fume.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1735, doi. 10.1111/ijac.14716
By:
- Liu, Runqing;
- Wang, Wei;
- Yang, Yuanquan
Publication type:
Article
Sludge‐based geopolymer materials: A review.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1333, doi. 10.1111/ijac.14714
By:
- Kong, Xiangqing;
- Shi, Jiarong;
- Shen, Yidan;
- Zhang, Wenjiao;
- Fu, Ying
Publication type:
Article
Rapid geometric characterization of ceramics fragments through split Hopkinson pressure bar tests.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2160, doi. 10.1111/ijac.14711
By:
- Li, Dan;
- Zhao, Bing;
- Meng, Maozhou
Publication type:
Article
Effect of cobalt oxide on characteristics of micro‐arc oxidation coatings on TC11 alloy.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1778, doi. 10.1111/ijac.14710
By:
- Zhu, Manlan;
- Lan, Xinyue;
- Wang, Ping;
- Luo, Qiming;
- Sun, Fengyu
Publication type:
Article
Antimicrobial characteristics of the Li2O–ZrO2–Si2O bioactive glass and glass‐ceramic for bone regeneration and wound healing.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2567, doi. 10.1111/ijac.14709
By:
- Possolli, Natália Morelli;
- Modolon, Henrique Borba;
- de Souza, Hilária Mendes;
- Pich, Claus Tröger;
- Klegues Montedo, Oscar Rubem;
- Angioletto, Elidio;
- Arcaro, Sabrina
Publication type:
Article
Improved oxidation resistance while maintaining slag corrosion resistance of MgO–SiC–C refractories with moderate amounts of liquid phase.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2391, doi. 10.1111/ijac.14708
By:
- Guo, Weijie;
- Zhao, Xu;
- Zhu, Tianbin;
- Chen, Qilong;
- Li, Yawei;
- Xu, Xiaofeng;
- Xu, Yibiao;
- Dai, Yajie;
- Yan, Wen;
- Li, Yuanjin;
- Wang, Xuyuan
Publication type:
Article
Phase separation during the direct powder bed fusion of SiC.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1722, doi. 10.1111/ijac.14707
By:
- Lamm, Benjamin W.;
- Karakoc, Omer;
- Mao, Keyou;
- Koyanagi, Takaaki;
- Liu, Jian;
- Katoh, Yutai
Publication type:
Article
Sm and Mn doped enhancing the electrical properties of.68PMN–.32PT relaxor ferroelectric thin films.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1768, doi. 10.1111/ijac.14706
By:
- Chen, Liang;
- Zhao, Changxing;
- Jiang, Peng;
- Xie, Shuhong;
- Pan, Kai
Publication type:
Article
Analysis and prospect of thermodynamic behavior of aluminosilicate solid waste during ceramization.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1317, doi. 10.1111/ijac.14705
By:
- Jiang, Mengting;
- Chen, Wei;
- Liu, Yuling;
- Du, Yong;
- Deng, Tengfei
Publication type:
Article
Mechanical properties and microstructure evolution of KD‐SA SiCf/BN/SiC CMCs oxidized at different temperatures.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2183, doi. 10.1111/ijac.14703
By:
- Li, Liuwei;
- Qin, Hao;
- Liao, Chunjing;
- You, Xiao;
- Luo, Han;
- Xue, Yudong;
- Yue, Xuezheng;
- Yang, Jinshan;
- Zhang, Xiangyu;
- Dong, Shaoming
Publication type:
Article
Permeability prediction of porous aerostatic bearings through 3D morphology and fractal calculation method.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1965, doi. 10.1111/ijac.14702
By:
- Cui, Jianwei;
- You, Xiaoyu;
- Zhang, Hongjun;
- Liu, Jian
Publication type:
Article
Corrosion behaviors of Ti3SiC2/Cu composites in molten salts.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2418, doi. 10.1111/ijac.14701
By:
- Liu, Fuyan;
- Du, Chengzhi;
- Wu, Chenlong;
- Zhang, Rui
Publication type:
Article
Preparation and thermal shock resistance of solar thermal absorbing corundum ceramics for concentrated solar power.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2102, doi. 10.1111/ijac.14700
By:
- Xu, Xiaohong;
- Liu, Shaoheng;
- Liu, Yang;
- Wu, Jianfeng;
- Yu, Jiaqi;
- Shen, Yaqiang
Publication type:
Article
Use of alumina dispersant in alumina‐spinel castable: Comparison between in situ and preformed spinels.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1527, doi. 10.1111/ijac.14699
By:
- Kumar, Satyam;
- Sarkar, Ritwik
Publication type:
Article
Properties and microstructures of porous corundum‐spinel aggregates fabricated via the Kirkendall effect.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1978, doi. 10.1111/ijac.14698
By:
- He, Yang;
- Mi, Zhuo;
- Chen, Qingjie;
- Peng, Die;
- Zhang, Shilong;
- Li, Nan
Publication type:
Article
Comparative analysis on corrosion behavior of lightweight and dense mullite–corundum refractories: Role of Si‐rich phase.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2377, doi. 10.1111/ijac.14697
By:
- Liu, Yuchi;
- Gao, Yunqin;
- Yin, Hongfeng;
- Xin, Yalou;
- Tang, Yun;
- Yuan, Hudie;
- Sun, Kewei
Publication type:
Article
Effect of infiltration temperature on graphitization and properties of diamond/SiC composites with SiC matrix.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1829, doi. 10.1111/ijac.14696
By:
- Hong, Tianxiang;
- Chen, Yuhong;
- Liu, Ruibin;
- Hai, Wanxiu;
- Zhang, Xiuling;
- Liu, Meiling;
- Yan, Suo
Publication type:
Article
Correlation study of random deposition for WC–12Co multiparticles on the TC18 substrates.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1700, doi. 10.1111/ijac.14695
By:
- Han, Xing;
- Li, Chang;
- Li, Siyu;
- Chen, Xinxue
Publication type:
Article
Fabrication of Si3N4 ceramics substrates with high thermal conductivity by tape casting and gas pressure sintering.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1493, doi. 10.1111/ijac.14694
By:
- Zhao, Jixue;
- Liu, Yun;
- Zheng, Yuanhang;
- Li, Xiaolei;
- Sui, Tianyi;
- Lin, Bin
Publication type:
Article
Synaptic and resistive switching behaviors of Sm‐doped HfO2 films for bio‐inspired neuromorphic calculations.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2498, doi. 10.1111/ijac.14693
By:
- Zhu, Jian‐Yuan;
- Liao, Jia‐Jia;
- Feng, Jian‐Hao;
- Jiang, Yan‐Ping;
- Tang, Xin‐Gui;
- Guo, Xiao‐Bin;
- Li, Wen‐Hua;
- Tang, Zhen‐Hua;
- Zhou, Yi‐Chun
Publication type:
Article
Ultrafine WC–Co cemented carbide end mills prepared by spark plasma sintering and wear mechanism in milling of AISI H13.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2553, doi. 10.1111/ijac.14692
By:
- Wang, Boxiang;
- Wang, Zhenhua;
- Yin, Zengbin;
- Xu, Weiwei;
- Jiang, Liyi;
- Yuan, Juntang
Publication type:
Article
Influence of drying conditions and plasticizer‐to‐binder ratio on the water‐based tape casting of La0.6Sr0.4Co0.2Fe0.8O3−δ.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1482, doi. 10.1111/ijac.14691
By:
- Javan, Kimia Y.;
- Sglavo, Vincenzo M.
Publication type:
Article
Combustion synthesized boron carbide powders by different organic carbon sources and microwave absorbing properties.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1438, doi. 10.1111/ijac.14690
By:
- Deng, Peilin;
- Ding, Donghai;
- Xiao, Guoqing;
- Mu, Yan;
- Chong, Xiaochuan;
- Hou, Xing
Publication type:
Article
Mechanical property and failure mechanism of coated Al2O3f/SiO2 composites by acoustic emission technology (AE).
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2151, doi. 10.1111/ijac.14689
By:
- Yang, Xiang;
- Chen, Mo;
- Kun, Chen;
- Zhou, Zheng;
- Zhi‐hang, Peng;
- Chen‐cheng, Sun;
- Wen‐jun, Wu;
- Jin, Wen;
- Jian‐hui, Cao
Publication type:
Article
Effect of grain size on tribological behavior of hot‐pressed boron carbide sliding against alumina balls.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2136, doi. 10.1111/ijac.14686
By:
- Zhou, Zhihui;
- Xia, Jie;
- Wang, Minbo;
- Li, Ruidi;
- Yuan, Tiechui
Publication type:
Article
Fabrication and properties of monolayer graphene reinforced Al2O3/TiN ceramic tool material.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2519, doi. 10.1111/ijac.14685
By:
- Tian, Xianhua;
- Sun, Qihang;
- Yang, Xiaodong;
- Wang, Qingqing;
- Wang, Lei;
- Wu, Kun
Publication type:
Article
Improving the mechanical property of the castables bonded with hydratable magnesium carboxylate by incorporating MgO fumes.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2321, doi. 10.1111/ijac.14682
By:
- Chen, Jianjun;
- Xiao, Guoqing;
- Ding, Donghai;
- Sun, Luyan;
- Zang, Yunfei;
- Yin, Chaofan;
- Feng, Haixia;
- Dong, Binbin;
- Wang, Qingfeng;
- Qian, Yuejin
Publication type:
Article
Improved water vapor corrosion resistance of SiC bricks via in situ formation of microporous Yb2Si2O7 bonding phase.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2369, doi. 10.1111/ijac.14681
By:
- Zhang, Xifei;
- Chen, Ding;
- Xue, Haitao;
- Huang, Ao;
- Gu, Huazhi;
- Fu, Lvping
Publication type:
Article
Energy storage and discharge performance for (1−x)BaSrTiO3−xBi(Zn1/2Ti1/2)O3 ceramics.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2037, doi. 10.1111/ijac.14680
By:
- Dai, Zhonghua;
- Liu, Chenxi;
- Pan, Yihao;
- Hou, Jie;
- Pan, Yu;
- Zhao, Xin;
- Liu, Weiguo;
- Cong, Yu;
- Gu, Shuitao
Publication type:
Article
Mechanical properties and oxidation corrosion resistance of phosphate ceramic coating enhanced by SiO2‐BNNSs material.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1747, doi. 10.1111/ijac.14679
By:
- Wei, Wentao;
- Wang, Quanlong;
- Wu, Meiping;
- Ma, Chenglong;
- Miao, Xiaojin;
- Wang, Yiyao;
- Wang, Jianyu;
- Zhou, Wen;
- Wang, Chenyu
Publication type:
Article
Phase transition and thermal stability of ceramics from Na‐based geopolymers.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2288, doi. 10.1111/ijac.14678
By:
- Gao, Binghuan;
- Li, Yangyang;
- Son, Hyeonjin;
- Jang, Seongwan;
- Lee, Hee‐Soo;
- Bae, Chang‐Jun
Publication type:
Article
Nickel element doping impacts on structure features and Faraday effects of magneto‐optical transparent holmium oxide ceramics.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2510, doi. 10.1111/ijac.14677
By:
- Wang, Mengyao;
- Lu, Bin;
- You, Bo;
- Pei, Ruijie;
- Sun, Zhigang;
- Li, Ji‐Guang;
- Sakka, Yoshio;
- Zhuang, Naifeng
Publication type:
Article
Mechanical and electrical properties of 3Y‐TZP/TiSi2 composites sintered at different temperatures.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2173, doi. 10.1111/ijac.14676
By:
- Liu, Weikang;
- Huang, Ting;
- Chen, Yucong;
- Huang, Yingying;
- Yao, Zhenhua
Publication type:
Article
Optimizing the structural and photocatalytic performance of Ag‐decorated ZnO/Zn(OH)2 nanoparticles for RhB degradation.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2010, doi. 10.1111/ijac.14675
By:
- Erdogan, Erman;
- Eden, Cigdem;
- Canpolat, Nurtac;
- Cirak, Cagri;
- Yilmaz, Mehmet
Publication type:
Article
Finite element analysis of temperature distribution in 3YSZ ceramics during conventional sintering.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1554, doi. 10.1111/ijac.14673
By:
- Kumar Singh, Shubham;
- Lakshya, Annu Kumar;
- Chowdhury, Anirban;
- Chakrabarti, Tamoghna
Publication type:
Article
Design and optimization of TiB2‐based ceramic tool materials based on fuzzy theory.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2541, doi. 10.1111/ijac.14672
By:
- Wang, Dong;
- Bao, Jingyang;
- Zhao, Bo;
- Ding, Zhengwei;
- Zheng, Guang
Publication type:
Article
Rapid assessment of the dependence of flexural elastic modulus on temperature through in‐situ image analysis.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2256, doi. 10.1111/ijac.14670
By:
- Li, Junfeng;
- Ma, Delong;
- Bao, Yiwang
Publication type:
Article
Mechanical properties due to competition behavior between damage and recovery of self‐healing fiber‐reinforced ceramics.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2228, doi. 10.1111/ijac.14669
By:
- Lee, JangWon;
- Akutsu, Yuki;
- Nakao, Wataru
Publication type:
Article
Influence of in situ dysprosium aluminate garnet formation on sintering of reaction sintered magnesium aluminate spinel.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1513, doi. 10.1111/ijac.14668
By:
- Baruah, Biswajit;
- Sarkar, Ritwik
Publication type:
Article
A strategy for low thermal conductivity of lutetium oxyorthosilicate ceramics fabricated via texture engineering.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2302, doi. 10.1111/ijac.14667
By:
- Wang, Xuefeng;
- Fan, Lingcong;
- Pan, Heng;
- Zhang, Xue;
- Shi, Ying;
- Xie, Jianjun;
- Lei, Fang;
- Zhang, Lei
Publication type:
Article
Effect of different ionic valence state doping on the structure and characteristic of BiFeO3‐BaTiO3‐based ceramics.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1688, doi. 10.1111/ijac.14666
By:
- Guo, Xiangtai;
- Sun, Yu;
- Liu, Liangliang;
- Yu, Zilong;
- Liu, Juan
Publication type:
Article
The influence of magnesium compounds on the properties of silicon nitride ceramics.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2273, doi. 10.1111/ijac.14665
By:
- Zhuang, Yinghua;
- Sun, Feng;
- Zhou, Lijuan;
- Jiang, Changxi;
- Wang, Jianjun;
- Li, Shuang;
- Liao, Shengjun
Publication type:
Article
Diffusion and release behavior of Ag+ in ion‐exchanged antibacterial glaze.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 2094, doi. 10.1111/ijac.14663
By:
- Wang, Wenkai;
- Guo, Ruixin;
- Niu, Chenchen;
- Zhao, Zhengkun;
- Xu, Kai
Publication type:
Article
Microstructure and microwave‐absorbing properties of B4C/C composite powders produced by combustion synthesis with an AC foaming agent.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1382, doi. 10.1111/ijac.14662
By:
- Zhou, Xiaoqian;
- Ding, Donghai;
- Xiao, Guoqing;
- Mu, Yan;
- Xing, Boying;
- Deng, Peilin;
- Zhang, Yanjie
Publication type:
Article
Study on the degradation of hydroxypropyl methylcellulose‐modified magnesium phosphate cement in different solutions.
Published in:
International Journal of Applied Ceramic Technology, 2024, v. 21, n. 3, p. 1678, doi. 10.1111/ijac.14660
By:
- Chen, Junying;
- Duan, Xingze;
- Wen, Jing;
- Ma, Tingting;
- Liao, Jianguo
Publication type:
Article