Works matching IS 1546542X AND DT 2024 AND VI 21 AND IP 1

Results: 52

Reactive hot pressing parameters on reaction, densification, and mechanical properties of Ti3AlC2 ceramic.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 44, doi. 10.1111/ijac.14547

By:

Rangaraj, Lingappa

Publication type:

Article

Contents.

Published in:: International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 1, doi. 10.1111/ijac.14600
Publication type:: Article

Properties and microstructure of Cf/HfC‐SiC composite prepared by combined process.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 230, doi. 10.1111/ijac.14541

By:

Yan, Chunlei;
Ye, Linsen;
Chen, Liyun;
Zhao, Zhenguo;
Liu, Rongjun

Publication type:

Article

Ni‐phase erosion losses at a Ni‐pore interface of microtubular solid oxide fuel cells during 5218 h of operation.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 340, doi. 10.1111/ijac.14540

By:

Liu, Yinglong;
Ye, Hao;
Ma, Yue;
Wang, Chenpeng;
Liu, Jiawei;
Liu, Yingli;
Xu, Xiaoru;
Chen, Zhicong;
Liang, Bo

Publication type:

Article

Particle grading effect on properties of reactive MgO‐bonded castables.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 590, doi. 10.1111/ijac.14537

By:

Zhang, Hongrui;
Zhao, Zongqiang;
Xiao, Jintao;
Jia, Quanli;
Ma, Chengliang;
Chen, Liugang

Publication type:

Article

Synergistic modulation of ferroelectric polarization and relaxor behavior of Sr2NaNb5O15‐based tungsten bronze ceramic.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 532, doi. 10.1111/ijac.14536

By:

Si, Peixiaokan;
Zheng, Peng;
Zhang, Xinzhong;
Luo, Chong;
Zheng, Xiangting;
Fan, Qiaolan;
Bai, Wangfeng;
Zhang, Jingji;
Zheng, Liang;
Zhang, Yang

Publication type:

Article

Structural evolution, dielectric, electric, and energy storage properties of BaTi1‐xLixO3‐3xF3x oxyfluorides.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 327, doi. 10.1111/ijac.14535

By:

Li, Yumin;
Bian, Jianjiang

Publication type:

Article

Improving the green mechanical strength and thermal shock resistance of colloidal silica‐bonded castables using La2O3.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 476, doi. 10.1111/ijac.14534

By:

Ding, Yuhang;
Liu, Huiyong;
Xue, Haitao;
Cong, Peiyuan;
Zhao, Yinheng;
Xiang, Bing;
Xia, Changyong

Publication type:

Article

Preparation of spherical AlON powder and high transparent ceramics by pressureless sintering.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 183, doi. 10.1111/ijac.14531

By:

Zhang, Yiming;
He, Qing;
Wu, Haoyang;
Zhang, Zhirui;
Jia, Baorui;
Lu, Huifeng;
Gu, Siyong;
Li, Tao;
Guo, Dengshuai;
Zhu, Zaiwen;
Hou, Dong;
Qu, Xuanhui;
Qin, Mingli

Publication type:

Article

Facile preparation of In2O3–In2S3 core–shell composites for the enhanced photoelectric activity.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 133, doi. 10.1111/ijac.14530

By:

Sun, Zhao‐Wei;
Shih, Li‐An;
Tseng, Wenjea J.

Publication type:

Article

Quasi‐synchronous solid‐state reaction for cordierite powder synthesis.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 169, doi. 10.1111/ijac.14529

By:

Lin, Yi‐Hsin;
Yen, Fu‐Su;
Hsiang, Hsing‐I;
Lee, Man‐Nee

Publication type:

Article

Processing and characterization of 2D woven ZrB2‐based ultrahigh‐temperature ceramic matrix composites.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 254, doi. 10.1111/ijac.14528

By:

Patel, Manish;
Kumar, Kurapati Pavan

Publication type:

Article

Ferroelastic structure AlNb1/2Ta1/2O4 ceramics with improved thermophysical and mechanical properties.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 465, doi. 10.1111/ijac.14527

By:

Zhang, Yuxuan;
Wang, Jun;
Song, Jianbo;
Zhang, Luyang;
Tian, Jiang;
Gu, Cang;
Su, Tao;
Feng, Jing

Publication type:

Article

Low‐cost porous thermal insulation materials with tunable pore structures derived from fly ash by foam‐gelcasting.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 267, doi. 10.1111/ijac.14526

By:

Li, Minghui;
Gao, Qingqing;
He, Qun;
Li, Saisai;
Quan, Yuxin;
Wu, Mengfei;
Li, Chanhua

Publication type:

Article

Effects of graphene pull‐out on the interfacial mechanical properties of alumina/graphene nanocomposite ceramic tool materials: Molecular dynamics analysis and material preparation.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 451, doi. 10.1111/ijac.14525

By:

Lu, Peishuai;
Chen, Hui;
Zhang, Jingjie;
Xiao, Guangchun;
Yi, Mingdong;
Chen, Zhaoqiang;
Xu, Chonghai

Publication type:

Article

Characterization and magnetic properties of CoFe2O4 nanoparticles synthesized by the co‐precipitation method.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 544, doi. 10.1111/ijac.14518

By:

Bayça, Feray

Publication type:

Article

Effect of B4C particle size and TiB2 content on the mechanical properties of B4C composites and their dynamic mechanical properties.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 438, doi. 10.1111/ijac.14522

By:

Wang, Bo;
Cai, Delong;
Li, Shiqi;
Wang, Haoyi;
Zou, Wenhua;
Yang, Zhihua;
Duan, Xiaoming;
He, Peigang;
Li, Daxin;
Duan, Wenjiu;
Pan, Yanzhi;
Zhao, Yueqian;
Jia, Dechang;
Zhou, Yu

Publication type:

Article

Ceramic bodies without warping using epoxide–acrylate hybrid ceramic slurry for photopolymerization‐based 3D printing.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 76, doi. 10.1111/ijac.14521

By:

Seo, Haeun;
Kim, Haeun;
Choi, Hyeryang;
Kim, Dong Gyeong;
Galbadrakh, Altantsetseg;
Jung, Yeon‐Gil;
Son, Jung‐Hun;
Yeo, Jeong‐gu;
Heo, So Yeon;
Choe, Gyu‐Bin;
Kim, Gyu‐Nam;
Koh, Young‐Hag;
Park, Hye‐Yeong;
Yang, SeungCheol

Publication type:

Article

Effect of fine silicon powders addition on improving nitridation of coarse silicon powders.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 105, doi. 10.1111/ijac.14520

By:

Yang, Jinguang;
Wu, Ping;
Wang, Li;
Zhang, Shiping

Publication type:

Article

Effect on BN interphase thickness upon SiCnws@BN/HfC coating performance under impact and ablation environment.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 240, doi. 10.1111/ijac.14519

By:

Tong, Mingde;
Fu, Qiangang;
Feng, Tao;
Dai, Ying;
Hou, Wanbo;
He, Pengfei

Publication type:

Article

A review on "Growth mechanisms and optimization strategies for the interface state of solid‐state lithium‐ion batteries".

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 5, doi. 10.1111/ijac.14523

By:

Liu, Guanzuo;
Yuan, Zhuo;
Deng, Yufeng;
Yu, Xinbiao;
Huang, Xinzhe;
Zheng, Guoxu;
Li, Yinan

Publication type:

Article

Synthesis, characterization, photocatalytic application of Gd/K co‐doped ZnO.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 349, doi. 10.1111/ijac.14517

By:

Aydın Ünal, Fatma;
Ünal, Murat;
Ataşer, Tuğçe;
Özçelik, Süleyman

Publication type:

Article

Effect of short carbon fiber content on strength and toughness of Al2O3–C refractories.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 427, doi. 10.1111/ijac.14516

By:

Wang, Yulong;
Wang, Zhoufu;
Wang, Xitang;
Liu, Hao;
Ma, Yan;
Jiang, Pengcheng;
Dong, Yunjie;
Niu, Jiwei

Publication type:

Article

Utilization of copper slag in the fabrication of silica refractory: Characteristics and performance evaluation.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 581, doi. 10.1111/ijac.14515

By:

Lv, Zihao;
Gu, Huazhi;
Zhang, Meijie;
Yang, Shuang;
Fu, Lvping;
Huang, Ao

Publication type:

Article

Effect of nano∖micro‐textures on the enhancement of tool wear resistance in green ceramics processing.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 384, doi. 10.1111/ijac.14513

By:

Liu, Yayun;
Zhang, Kedong;
Zhu, Qi;
Wang, Chuanyang

Publication type:

Article

3D‐printed alumina‐based ceramics with spatially resolved porosity.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 89, doi. 10.1111/ijac.14512

By:

Nohut, Serkan;
Schlacher, Josef;
Kraleva, Irina;
Schwentenwein, Martin;
Bermejo, Raul

Publication type:

Article

Synthesis and characterization of geopolymer from "In Natura" red mud and glass waste.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 158, doi. 10.1111/ijac.14511

By:

Fagundes, Júnia Toledo;
Santana, Vanessa Pereira;
Ferreira, Gabriella Andrade;
Brigolini, Guilherme Jorge

Publication type:

Article

Synthesis of α‐MnO2, β‐C2S, and α‐MnO2/β‐C2S nanocomposite for effective removal of phosphate from water.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 142, doi. 10.1111/ijac.14510

By:

Rathore, Roshni;
Waghmare, Aakash;
Rai, Sarita;
Chandra, Vimlesh

Publication type:

Article

Effect of the reaction process between the SEN and molten steel containing aluminum by applying an electric field.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 417, doi. 10.1111/ijac.14504

By:

Tian, Chen;
Yuan, Lei;
Liu, Xiaoming;
Wang, Qiang

Publication type:

Article

Characterization of Na2Zn2TeO6 ceramic solid electrolyte densified by hot pressing.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 311, doi. 10.1111/ijac.14508

By:

Itaya, Akihiro;
Ono, Yuki;
Yamamoto, Kazuki;
Inada, Ryoji

Publication type:

Article

Design, characterization, and incorporation of geopolymer binders in refractory ceramic compositions.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 565, doi. 10.1111/ijac.14507

By:

Bezerra, Breno Parente;
Morelli, Márcio Raymundo;
Luz, Ana Paula

Publication type:

Article

The effect of substrate bias voltage on the mechanical and electrochemical corrosion properties of multilayered CrN/CrAlN coatings produced by cathodic arc evaporation.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 395, doi. 10.1111/ijac.14506

By:

Baseri, Niloofar Arab;
Mohammadi, Majid;
Ghatee, Mojtaba;
Yousefieh, Mohammad;
Abassi‐Firouzjah, Marzieh

Publication type:

Article

Effect of surface treatment upon luminous efficiency of YAG: Ce ceramics.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 525, doi. 10.1111/ijac.14505

By:

Li, Yanan;
Zhang, Haitao;
Ling, Junrong;
Yang, Jian;
Xu, Wentao;
Zhou, Youfu;
Hong, Maochun

Publication type:

Article

Synthesis and electrochemical properties of hydrangea‐like (NH4)2V4O9/V5O12·6H2O cathode for zinc‐ion battery.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 319, doi. 10.1111/ijac.14509

By:

Song, Jiajia;
Kou, Lingjiang;
Wang, Yong;
Ai, Taotao;
Li, Wenhu;
Kajiyoshi, Koji;
Wattanapaphawong, Panya;
Li, Yi

Publication type:

Article

Fabrication and mechanical properties of low‐temperature sintered Al2TiO5 flexible ceramics.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 370, doi. 10.1111/ijac.14502

By:

Ma, Qian;
Shui, Anze;
He, Chao;
Zhou, Yuqian;
Shan, Qingliang

Publication type:

Article

(Bi0.5Na0.5)(Zr0.97W0.01Fe0.02)O3 doping effects on KNN‐based lead‐free ceramics prepared via two‐step sintering technique.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 515, doi. 10.1111/ijac.14501

By:

Li, Wanji;
Fang, Bijun;
Lu, Xiaolong;
Zhang, Shuai;
Ding, Jianning

Publication type:

Article

Sintering behavior and physical properties of ZnO‐modified BaZrO3 ceramics.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 124, doi. 10.1111/ijac.14500

By:

Qiao, Zhe;
Li, Shujing;
Li, Yuanbing;
Wu, Qinye;
Wei, Zhipeng

Publication type:

Article

Formation mechanism of TiC/Al2O3 composite from porous Ti3AlC2 ceramics in 35 vol.% CO‐N2 atmosphere.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 220, doi. 10.1111/ijac.14499

By:

Xiao, Junli;
Wei, Yaowu;
Peng, Conghua;
Zhou, Siqi;
Zhang, Shaowei;
Li, Nan;
Chen, Junfeng

Publication type:

Article

Fabrication and investigation of zinc oxide nanorods doped with molybdenum via ultrasonic spray pyrolysis.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 114, doi. 10.1111/ijac.14498

By:

Çolak, Hakan;
Karaköse, Ercan

Publication type:

Article

Synthesis of BaZr0.1Ce0.7Y0.2O3‐δ nano‐powders by aqueous gel‐casting for proton‐conducting solid oxide fuel cells.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 299, doi. 10.1111/ijac.14497

By:

Wang, Donggang;
Zhang, Zhenhao;
Song, Tao;
Sun, Haibin;
Li, Jiao;
Guo, Xue;
Hu, Qiangqiang;
Feng, Yurun;
Zhao, Shikai

Publication type:

Article

Utilization of industrial wastes in Al2O3‐SiC‐SiO2‐C refractories: Characterization of erosion and corrosion resistance.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 555, doi. 10.1111/ijac.14496

By:

Ju, Maoqi;
Cheng, Shuiming;
Xia, Changyong;
Liang, Yonghe;
Cai, Manfei;
Cai, Wei

Publication type:

Article

High piezoelectric and dielectric constant of Fe/In Co‐doped KNN‐based ceramics regulated by lattice distortion.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 493, doi. 10.1111/ijac.14495

By:

Leng, Wangzhe;
Wan, Guoxi;
Liu, Yanyu;
Ma, Rui;
Du, Yi

Publication type:

Article

The phase evolution of resin‐bonded Al2O3‐Al refractory containing magnesia under N2‐blowing.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 408, doi. 10.1111/ijac.14494

By:

Zheng, Qingyao;
Li, Yong;
Zhao, Chenrui;
Chen, Junhong;
Jiang, Peng;
Ma, Chenhong

Publication type:

Article

Effect of reactive diluent concentration on rheological and curing behavior of zirconia ceramic slurry for DLP printing.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 62, doi. 10.1111/ijac.14493

By:

Liu, Yansong;
Liu, Yongsheng;
She, Wentan;
Cao, Yejie;
Zeng, Qingfeng;
Dong, Ning

Publication type:

Article

The effect of spark plasma sintering parameters on the densification and mechanical properties of TiB2‐TiC‐TiB composites.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 207, doi. 10.1111/ijac.14492

By:

Liu, Luo‐Jin;
Zhang, Zhao‐Hui;
Jia, Xiao‐Tong;
Wang, Qiang;
Song, Qi;
Li, Xian‐Yu;
Cheng, Xing‐Wang

Publication type:

Article

Failure behavior of SiC/SiC composites with Si/Yb2SiO5 and Si/mullite/Yb2SiO5 EBCs in wet oxygen at 1350°C.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 358, doi. 10.1111/ijac.14491

By:

Wang, Yulei;
Wang, Wenli;
Cao, Xinxin;
Zhang, Ziqi;
Li, Jianzhang;
Han, Guifang;
Cheng, Laifei

Publication type:

Article

Electrochemical performance of La0.6Sr0.4CoO3–δ–Ce0.9Gd0.1O1.95 composite cathode for IT‐SOFCs.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 289, doi. 10.1111/ijac.14490

By:

Fan, Hongpeng;
Liu, Zhijun;
Wu, Yang;
Wang, Qin;
Yang, Jun;
Guan, Wanbing;
Han, Liang;
Wang, Jianxin

Publication type:

Article

MnOx‐supported geopolymer pellets catalysts for low temperature NH3‐SCR: The effect of synthesized temperature.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 278, doi. 10.1111/ijac.14487

By:

Wang, Chunmei;
Zhang, Haohao;
Zhang, Huakang;
Wang, Yifei;
Yang, Lirong;
Liu, Zhigang;
Feng, Xiaoxin

Publication type:

Article

Effect of micro/nano La2O3 addition on the sintering and properties of mullite synthesized.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 51, doi. 10.1111/ijac.14486

By:

Gao, Xiong;
Zhang, Deng;
Feng, Xueru;
Zhang, Jiamin;
Peng, Yuqing;
Pan, Zhicheng;
Dai, Zongming

Publication type:

Article

Effect of defect‐induced bandgap intermediate states on the photovoltaic performance of KN‐based ferroelectric ceramics.

Published in:

International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 504, doi. 10.1111/ijac.14485

By:

Deng, Tingcong;
Su, Mingwei;
Meng, Liufang;
Zhu, Baohua;
Yuan, Changlai;
Liu, Xiao;
Zhou, Changrong

Publication type:

Article