Works matching IS 1546542X AND DT 2022 AND VI 19 AND IP 5
Results: 47
Nanocarbon containing low carbon Al<sub>2</sub>O<sub>3</sub>–C refractories: Comparison between N220 and N990 nanocarbons.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2761, doi. 10.1111/ijac.14120
- By:
- Publication type:
- Article
Erosive and corrosive wear performance and characterization studies of plasma‐sprayed WC/Cr<sub>3</sub>C<sub>2</sub> coating on SS316.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2845, doi. 10.1111/ijac.14118
- By:
- Publication type:
- Article
Reformulation of bone china body for the reduction of pyroplastic deformation.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2780, doi. 10.1111/ijac.14115
- By:
- Publication type:
- Article
First‐principles calculation of mechanical properties and electronic structures of W<sub>4</sub>Co<sub>4−</sub><sub>n</sub>X<sub>n</sub>B<sub>4</sub> (X = V, Mn, Fe, Ni; n = 0,1).
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2862, doi. 10.1111/ijac.14114
- By:
- Publication type:
- Article
Densification and enhancement of SiC particulate‐reinforced fine‐grain SiC ceramic.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2514, doi. 10.1111/ijac.14112
- By:
- Publication type:
- Article
Waste‐bearing foamed ceramic from granite scrap and red mud.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2686, doi. 10.1111/ijac.14110
- By:
- Publication type:
- Article
The influence of particle size distribution on rheological properties of fused silica pastes for direct ink writing.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2472, doi. 10.1111/ijac.14109
- By:
- Publication type:
- Article
Effect of graphene on the microstructure and corrosion resistance of PEO coating formed on D16T aluminum alloy.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2583, doi. 10.1111/ijac.14108
- By:
- Publication type:
- Article
Process optimization for Hafnia‐doped silicon bond coats fabricated by plasma spraying for SiC‐CMC.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2574, doi. 10.1111/ijac.14106
- By:
- Publication type:
- Article
Improved additive manufacturing of silicon carbide parts via pressureless electric field‐assisted sintering.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2480, doi. 10.1111/ijac.14105
- By:
- Publication type:
- Article
Surface modification of ceramic coating for enhanced hydrophobicity and wear properties.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2648, doi. 10.1111/ijac.14103
- By:
- Publication type:
- Article
Improved oxidation resistance properties of Si<sub>3</sub>N<sub>4</sub>/O′–SiAlON composite ceramics by a repeated sintering method.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2905, doi. 10.1111/ijac.14102
- By:
- Publication type:
- Article
Controlling the particle size of spherical silica by adjusting the gas flow environment around the flame.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2450, doi. 10.1111/ijac.14101
- By:
- Publication type:
- Article
Laser thermal gradient testing of air plasma sprayed multilayered, multi‐material thermal barrier coatings.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2632, doi. 10.1111/ijac.14100
- By:
- Publication type:
- Article
In situ synthesis of zinc oxide/selenium composite for UV blocker application.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2437, doi. 10.1111/ijac.14099
- By:
- Publication type:
- Article
Preparation of high strength and low thermal conductivity mullite refractories based on reconstruction of fly ash.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2749, doi. 10.1111/ijac.14098
- By:
- Publication type:
- Article
YAG:Ce<sup>3+</sup> piezo‐spectroscopy: A high‐sensitive method used for stress characterization of thermal barrier coating.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2623, doi. 10.1111/ijac.14097
- By:
- Publication type:
- Article
Enhanced corrosion‐resistant performance of the PEO coatings on AA7075 alloy by a sol–gel‐derived silica layer.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2613, doi. 10.1111/ijac.14096
- By:
- Publication type:
- Article
Preparation, microstructure, and properties of GPS silicon nitride ceramics with β‐Si<sub>3</sub>N<sub>4</sub> seeds and nanophase additives.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2533, doi. 10.1111/ijac.14095
- By:
- Publication type:
- Article
Rutile‐to‐anatase reverse phase transformation in nano titania with morphological changes in a hydrothermal approach.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2427, doi. 10.1111/ijac.14094
- By:
- Publication type:
- Article
The effect of pore morphology and agarose coating on mechanical properties of tricalcium phosphate scaffolds.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2713, doi. 10.1111/ijac.14093
- By:
- Publication type:
- Article
Investigation of nanosized alumina‐binder feedstock rheology for ceramics injection molding (CIM) and survey spark plasma sintering of output green body to obtain transparent alumina.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2500, doi. 10.1111/ijac.14086
- By:
- Publication type:
- Article
The fabrication of porous mullite ceramics based on the different sizes of aluminum hydroxide.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2675, doi. 10.1111/ijac.14085
- By:
- Publication type:
- Article
Preparation of YAG nanopowders and ceramics via coprecipitation: Effects of treatment modes of precipitates.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2419, doi. 10.1111/ijac.14084
- By:
- Publication type:
- Article
Silver/selenium/chitosan co‐substituted bioceramic coatings of Ni–Ti alloy: Antibacterial efficiency and cell viability.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2701, doi. 10.1111/ijac.14083
- By:
- Publication type:
- Article
Recycling bagasse and rice hulls ash as a pore‐forming agent in the fabrication of cordierite–spinel porous ceramics.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2664, doi. 10.1111/ijac.14082
- By:
- Publication type:
- Article
Effects of Al<sub>2</sub>O<sub>3</sub>–Y<sub>2</sub>O<sub>3</sub>/Yb<sub>2</sub>O<sub>3</sub> additives on microstructures and mechanical properties of silicon nitride ceramics prepared by hot‐pressing sintering.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2523, doi. 10.1111/ijac.14081
- By:
- Publication type:
- Article
Dissolution mechanism of alumina inclusions into CaO–SiO<sub>2</sub>–Al<sub>2</sub>O<sub>3</sub>–Fe<sub>t</sub>O–MgO slag via a converter tapping process.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2734, doi. 10.1111/ijac.14080
- By:
- Publication type:
- Article
Correlation between nanoindentation response and wear characteristics of CrN‐based coatings deposited by an Arc‐PVD method.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2598, doi. 10.1111/ijac.14079
- By:
- Publication type:
- Article
Sintering behavior and morphology control of porous Al<sub>2</sub>O<sub>3</sub>‐SiO<sub>2</sub> ceramics for radome applications.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2489, doi. 10.1111/ijac.14078
- By:
- Publication type:
- Article
Fabrication and characterization of Si<sub>3</sub>N<sub>4</sub> whisker‐reinforced SiO<sub>2</sub> ceramic for radome materials.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2916, doi. 10.1111/ijac.14077
- By:
- Publication type:
- Article
Improving the flexural strength of porcelain by residual stress in anorthite coating.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2566, doi. 10.1111/ijac.14076
- By:
- Publication type:
- Article
Preparation of ultralow thermal conductivity (Mg<sub>0.5</sub>Ca<sub>0.3</sub>Ba<sub>0.2</sub>) (AlSi)<sub>2</sub>O<sub>8</sub> ceramics.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2883, doi. 10.1111/ijac.14075
- By:
- Publication type:
- Article
Influence of particle size on 3D‐printed piezoelectric ceramics via digital light processing with furnace sintering.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2461, doi. 10.1111/ijac.14074
- By:
- Publication type:
- Article
Femtosecond laser microstructuring of monolithic zirconia: Effects of laser parameters on resin bond strength.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2834, doi. 10.1111/ijac.14073
- By:
- Publication type:
- Article
In situ synthesis and interfacial bonding mechanism of SiC in MgO–SiC–C refractories.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2723, doi. 10.1111/ijac.14072
- By:
- Publication type:
- Article
Solution combustion synthesis of FeCr<sub>2</sub>O<sub>4</sub> powders for pigment applications: Effect of fuel type.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2406, doi. 10.1111/ijac.14071
- By:
- Publication type:
- Article
Enhancing fracture strength of ceramic core using sodium silicate as the binder.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2826, doi. 10.1111/ijac.14070
- By:
- Publication type:
- Article
The effect of boron nitride nanosheets on the mechanical and thermal properties of aluminum nitride ceramics.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2817, doi. 10.1111/ijac.14069
- By:
- Publication type:
- Article
Simultaneous oxidation of aromatic compounds using Sr‐doped lanthanum manganites as catalysts.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2891, doi. 10.1111/ijac.14068
- By:
- Publication type:
- Article
Effects of Y<sub>2</sub>O<sub>3</sub>/MgO ratio on mechanical properties and thermal conductivity of silicon nitride ceramics.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2873, doi. 10.1111/ijac.14067
- By:
- Publication type:
- Article
Improvement in corrosion resistance of micro‐arc oxidation coating on PVD Ti‐coated aluminum alloy 7075.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2556, doi. 10.1111/ijac.14066
- By:
- Publication type:
- Article
Synthesis of γ‐Bi<sub>2</sub>O<sub>3</sub>/YSZ composite powders using a facile precipitation method.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2399, doi. 10.1111/ijac.14065
- By:
- Publication type:
- Article
Reaction, densification, and mechanical properties of Ti<sub>2</sub>AlC<sub>x</sub> ceramics at low applied pressure and temperature.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2807, doi. 10.1111/ijac.14064
- By:
- Publication type:
- Article
To drill or not to drill? Creep of an oxide‐oxide composite with diamond‐drilled effusion holes at elevated temperature.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2796, doi. 10.1111/ijac.14063
- By:
- Publication type:
- Article
Antifungal behavior of silicon‐incorporated diamond‐like carbon by tuning surface hydrophobicity with plasma treatment.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2545, doi. 10.1111/ijac.14048
- By:
- Publication type:
- Article
Contents.
- Published in:
- International Journal of Applied Ceramic Technology, 2022, v. 19, n. 5, p. 2395, doi. 10.1111/ijac.13792
- Publication type:
- Article