Works matching IS 1546542X AND DT 2021 AND VI 18 AND IP 1

Results: 31

Editor's Letter.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 5, doi. 10.1111/ijac.13646
By:
- Kim, Young‐Wook
Publication type:
Article
With our utmost admiration and appreciation: Farewell to HT Lin and Monica Ferraris.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 4, doi. 10.1111/ijac.13645
By:
- Goski, Dana;
- Ohji, Tatsuki;
- Mecklenborg, Mark
Publication type:
Article
Effects of composite binder phase on microstructure and mechanical properties of ultrafine‐grained cemented carbides.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 119, doi. 10.1111/ijac.13643
By:
- Yu, Bin;
- Wang, Zhenhua;
- Sun, Ning;
- Zheng, Kan;
- Wang, Boxiang;
- Yin, Zengbin;
- Yuan, Juntang
Publication type:
Article
Energy storage and thermodynamics of PNZST thick films with coexisting antiferroelectric and ferroelectric phases.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 154, doi. 10.1111/ijac.13642
By:
- Zhao, Quan‐Liang;
- Wang, Yi‐Kai;
- He, Guang‐Ping;
- Di, Jie‐Jian;
- Zhao, Lei;
- Su, Ting‐Ting;
- Zhang, Meng‐Ying;
- Hou, Zhi‐Ling;
- Wang, Dawei
Publication type:
Article
Incorporating sugarcane bagasse ash into Al2O3 ceramic tapes.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 213, doi. 10.1111/ijac.13640
By:
- Silva, Larissa B.;
- Alves, Hugo P. A.;
- Freitas, Anna K. C.;
- Marques, Sheyla K. J.;
- Acchar, Wilson
Publication type:
Article
SiC‐based porous ceramic carriers for heat‐conductive phase change materials through carbothermal reduction method.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 91, doi. 10.1111/ijac.13639
By:
- Liu, Xiaoqian;
- Zhou, Yang;
- Liu, Xufeng;
- Li, Runfeng;
- Li, Shibo;
- Li, Cuiwei
Publication type:
Article
Enhancement of mechanical properties of hydroxyapatite coating prepared by electrophoretic deposition method.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 147, doi. 10.1111/ijac.13638
By:
- Asgari, Nayereh;
- Rajabi, Masoud
Publication type:
Article
Sintering and microstructural study of mullite prepared from kaolinite and reactive alumina: Effect of MgO and TiO2.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 81, doi. 10.1111/ijac.13637
By:
- Suhasinee Behera, Pallavi;
- Bhattacharyya, Sunipa
Publication type:
Article
Assessment of mechanical and microstructural properties of geopolymers produced from metakaolin, silica fume, and red mud.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 262, doi. 10.1111/ijac.13635
By:
- Mendes, Beatryz;
- Andrade, Igor Klaus;
- de Carvalho, José Maria;
- Pedroti, Leonardo;
- de Oliveira Júnior, André
Publication type:
Article
Circular economy in cementitious ceramics: Replacement of hydrated lime with a stoichiometric balanced combination of clay and marble waste.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 192, doi. 10.1111/ijac.13634
By:
- Marvila, Markssuel T.;
- Azevedo, Afonso R. G.;
- Alexandre, Jonas;
- Colorado, Henry;
- Pereira Antunes, Maria L.;
- Vieira, Carlos M. F.
Publication type:
Article
Novel mullite‐cordierite ceramic refractory fabricated from halloysite and talc.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 70, doi. 10.1111/ijac.13633
By:
- Cheraitia, Abdallah;
- Redjimi, Zahia;
- Bououdina, Mohamed
Publication type:
Article
Corrosion behavior of oxide ion conductors for high‐temperature direct electrochemical metal oxide reduction.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 60, doi. 10.1111/ijac.13632
By:
- Hwang, Kuk‐Jin;
- Shin, Miyoung;
- Lee, Myung‐Hyun;
- Lee, Heesoo;
- Shin, Tae Ho
Publication type:
Article
Improvement of flexural bond strength of zirconia‐resin cement by surface patterning using sub‐nanosecond UV laser.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 51, doi. 10.1111/ijac.13631
By:
- Akay, Canan;
- Turan, Neslihan;
- Karakış, Duygu;
- Angurel, Luis Alberto
Publication type:
Article
Biowaste‐derived hydroxyapatite reinforced with polyvinyl pyrrolidone/aloevera composite for biomedical applications.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 221, doi. 10.1111/ijac.13630
By:
- Mathina, Mathiyalagan;
- Shinyjoy, Elangomannan;
- Kavitha, Louis;
- Gopi, Dhanaraj
Publication type:
Article
Role of CeAl11O18 in reinforcing Al2O3/Ti composites by adding CeO2.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 170, doi. 10.1111/ijac.13629
By:
- Shi, Shengfang;
- Cho, Sunghun;
- Goto, Tomoyo;
- Sekino, Tohru
Publication type:
Article
Effect of waste‐derived MA spinel on sintering and stabilization behavior of partially stabilized double phase zirconia.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 203, doi. 10.1111/ijac.13628
By:
- El‐Amir, Ahmed A. M.;
- Abdelgawad, Mahmoud;
- Li, Shufeng;
- Ewais, Emad M. M.;
- El‐Gamal, Safaa M. A.
Publication type:
Article
Effect of Al contained in polymer‐derived SiC crystals on creating stable crystal grain boundaries.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 6, doi. 10.1111/ijac.13627
By:
- Usukawa, Ryutaro;
- Ishikawa, Toshihiro
Publication type:
Article
The effect of heat treatment on tensile properties of 2D C/SiC composites.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 162, doi. 10.1111/ijac.13626
By:
- Mei, Hui;
- Lu, Mingyang;
- Zhou, Shixiang;
- Cheng, Laifei
Publication type:
Article
Extraction and characterization of hydroxyapatite‐based materials from grey triggerfish skin and black scabbardfish bones.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 235, doi. 10.1111/ijac.13625
By:
- Ideia, Pedro;
- Degli Esposti, Lorenzo;
- Miguel, Carla Caseiro;
- Adamiano, Alessio;
- Iafisco, Michele;
- Castilho, Paula C.
Publication type:
Article
Study on the effect of Ti, Al, Cu, and Ag doping on the bonding properties of soldered β‐Sn(100)/ZrO2(111) interface.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 138, doi. 10.1111/ijac.13624
By:
- Guo, Weibing;
- She, Zongyu;
- Xue, Haitao;
- Zhang, Xiaoming
Publication type:
Article
Ni‐Cu‐Zn ferrites with high Curie temperature for multilayer inductors with increased operating temperatures.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 129, doi. 10.1111/ijac.13623
By:
- Reimann, Timmy;
- Capraro, Beate;
- Bartsch, Heike;
- Töpfer, Jörg
Publication type:
Article
Development of cordierite/mullite composites using industrial wastes.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 253, doi. 10.1111/ijac.13622
By:
- Brito, Igor Pinheiro;
- Almeida, Ester Pires;
- Araújo Neves, Gelmires;
- Lucena Lira, Hélio;
- Menezes, Romualdo Rodrigues;
- Silva, Valmir José;
- Lima Santana, Lisiane Navarro
Publication type:
Article
Tailored pore structures and mechanical properties of porous alumina ceramics prepared with corn cob pore‐forming agent.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 244, doi. 10.1111/ijac.13621
By:
- Dele‐Afolabi, T. T.;
- Azmah Hanim, M. A.;
- Ojo‐Kupoluyi, O. J.;
- Calin, R.;
- Zuhri, M. Y. M.
Publication type:
Article
Effect of nano CuO addition on the tribo‐mechanical behavior of alumina ceramics in non‐conformal contact.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 110, doi. 10.1111/ijac.13620
By:
- Haldar, Partha;
- Bhattacharya, Tapas Kumar;
- Modak, Nipu
Publication type:
Article
Microstructures and strengths of microporous MgO‐Al2O3 refractory aggregates using two types of magnesite.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 100, doi. 10.1111/ijac.13619
By:
- Huang, Yifan;
- Chen, Zhe;
- Yan, Wen;
- Dai, Yajie;
- Li, Guangqiang;
- Wang, Qiang;
- Li, Nan;
- Li, Yawei
Publication type:
Article
A strategy for fabricating anisotropic SI3N4 ceramics with controllable mechanical and thermal properties.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 40, doi. 10.1111/ijac.13618
By:
- Zhao, Zhe;
- Lu, Xugao;
- Zhou, Guoxiang;
- Yang, Yitian;
- Lin, Kunpeng;
- Yang, Zhihua;
- Jia, Dechang;
- Zhou, Yu
Publication type:
Article
A green composite material of calcium phosphate cement matrix with additions of car tire waste particles.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 182, doi. 10.1111/ijac.13617
By:
- Revelo, Carlos F.;
- Colorado, Henry A.
Publication type:
Article
Sol‐gel assisted synthesis of TiB2‐B4C composite powder.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 32, doi. 10.1111/ijac.13615
By:
- GahremanDerakhshan, Mahnaz;
- Nikzad, Leila;
- Farvizi, Mohammad;
- Ebadzadeh, Touradj
Publication type:
Article
High‐efficiency mechanochemical synthesis of Strontium carbonate nanopowder from Celestite.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 24, doi. 10.1111/ijac.13612
By:
- Dayani, Nastaran;
- AmirArjmand, Ali;
- Nouri‐Khezrabad, Mohsen;
- Hasani, Saeed
Publication type:
Article
Structural, morphological, and opto‐electrical properties of Y2‐xYbxO3 nanoparticles synthesized using co‐precipitation method.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 12, doi. 10.1111/ijac.13603
By:
- Kumar, Sushil;
- Tripathi, Harshit;
- Sharma, Jagmohan;
- Batra, Uma
Publication type:
Article
Issue Information.
Published in:
International Journal of Applied Ceramic Technology, 2021, v. 18, n. 1, p. 1, doi. 10.1111/ijac.13553
Publication type:
Article

Works matching IS 1546542X AND DT 2021 AND VI 18 AND IP 1

Editor's Letter.

With our utmost admiration and appreciation: Farewell to HT Lin and Monica Ferraris.

Effects of composite binder phase on microstructure and mechanical properties of ultrafine‐grained cemented carbides.

Energy storage and thermodynamics of PNZST thick films with coexisting antiferroelectric and ferroelectric phases.

Incorporating sugarcane bagasse ash into Al<sub>2</sub>O<sub>3</sub> ceramic tapes.

SiC‐based porous ceramic carriers for heat‐conductive phase change materials through carbothermal reduction method.

Enhancement of mechanical properties of hydroxyapatite coating prepared by electrophoretic deposition method.

Sintering and microstructural study of mullite prepared from kaolinite and reactive alumina: Effect of MgO and TiO<sub>2</sub>.

Assessment of mechanical and microstructural properties of geopolymers produced from metakaolin, silica fume, and red mud.

Circular economy in cementitious ceramics: Replacement of hydrated lime with a stoichiometric balanced combination of clay and marble waste.

Novel mullite‐cordierite ceramic refractory fabricated from halloysite and talc.

Corrosion behavior of oxide ion conductors for high‐temperature direct electrochemical metal oxide reduction.

Improvement of flexural bond strength of zirconia‐resin cement by surface patterning using sub‐nanosecond UV laser.

Biowaste‐derived hydroxyapatite reinforced with polyvinyl pyrrolidone/aloevera composite for biomedical applications.

Role of CeAl<sub>11</sub>O<sub>18</sub> in reinforcing Al<sub>2</sub>O<sub>3</sub>/Ti composites by adding CeO<sub>2</sub>.

Effect of waste‐derived MA spinel on sintering and stabilization behavior of partially stabilized double phase zirconia.

Effect of Al contained in polymer‐derived SiC crystals on creating stable crystal grain boundaries.

The effect of heat treatment on tensile properties of 2D C/SiC composites.

Extraction and characterization of hydroxyapatite‐based materials from grey triggerfish skin and black scabbardfish bones.

Study on the effect of Ti, Al, Cu, and Ag doping on the bonding properties of soldered β‐Sn(100)/ZrO<sub>2</sub>(111) interface.

Ni‐Cu‐Zn ferrites with high Curie temperature for multilayer inductors with increased operating temperatures.

Development of cordierite/mullite composites using industrial wastes.

Tailored pore structures and mechanical properties of porous alumina ceramics prepared with corn cob pore‐forming agent.

Effect of nano CuO addition on the tribo‐mechanical behavior of alumina ceramics in non‐conformal contact.

Microstructures and strengths of microporous MgO‐Al<sub>2</sub>O<sub>3</sub> refractory aggregates using two types of magnesite.

A strategy for fabricating anisotropic SI<sub>3</sub>N<sub>4</sub> ceramics with controllable mechanical and thermal properties.

A green composite material of calcium phosphate cement matrix with additions of car tire waste particles.

Sol‐gel assisted synthesis of TiB<sub>2</sub>‐B<sub>4</sub>C composite powder.

High‐efficiency mechanochemical synthesis of Strontium carbonate nanopowder from Celestite.

Structural, morphological, and opto‐electrical properties of Y<sub>2‐x</sub>Yb<sub>x</sub>O<sub>3</sub> nanoparticles synthesized using co‐precipitation method.

Issue Information.