Works matching IS 1546542X AND DT 2020 AND VI 17 AND IP 5

Results: 44

A cathode support structure for use in a magnetron oscillator experiment.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2393, doi. 10.1111/ijac.13581

By:

Black, Daylon;
Harper, Ryan;
Ward, Patrick;
Davlin, Jacob;
Bentancourt, Omar;
Plumlee, Donald;
Browning, Jim

Publication type:

Article

Preparation of high‐strength lightweight alumina with plant‐derived pore using corn stalk as pore‐forming agent.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2465, doi. 10.1111/ijac.13580

By:

Li, Xuesong;
Li, Yuanbing;
Li, Shujing;
Wei, Zhipeng;
Xiang, Ruofei

Publication type:

Article

Preparation, mechanical properties, and toughening mechanisms of SiCw/SiCp‐reinforced zirconia‐toughened alumina ceramics.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2083, doi. 10.1111/ijac.13517

By:

Liu, Longyang;
Chen, Xianzhi;
Li, Qiyu;
Chen, Shuaifeng;
Chen, Yongjun;
Li, Jianbao;
Li, Changjiu;
Luo, Lijie

Publication type:

Article

Effects of aggregate/matrix‐phase ratio on the in‐situ synthesis of SiC whiskers and properties of reaction‐bonded SiC.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2147, doi. 10.1111/ijac.13573

By:

Li, Yage;
Lao, Xinbin;
Wang, Tao;
Liu, Jianmin;
Jiang, Feng;
Feng, Guo;
Jiang, Weihui;
Tang, Huidong

Publication type:

Article

Detection of phases in Fe‐doped YSZ by XRD and Raman spectroscopy.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2424, doi. 10.1111/ijac.13524

By:

Satardekar, Pradnyesh;
Naik, Kiran;
Sglavo, Vincenzo M.

Publication type:

Article

Research on strain distribution and damage behavior of thermal barrier coatings based on digital image correlation.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2156, doi. 10.1111/ijac.13523

By:

Wang, Li;
Wang, Haidou;
Di, Yuelan;
Zhao, Yuncai;
Wang, Le

Publication type:

Article

Phase stability and microstructure evolution of MgO‐ZrO2 and MgO‐6YSZ ceramic fibers.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2094, doi. 10.1111/ijac.13519

By:

Yuan, Kangkang;
Jin, Xiaotong;
Wang, Xinqiang

Publication type:

Article

Wettability modification of zirconia by laser surface texturing and silanization.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2182, doi. 10.1111/ijac.13579

By:

Pu, Zihao;
Jing, Xiubing;
Yang, Chengjuan;
Wang, Fujun;
Ehmann, Kornel F.

Publication type:

Article

Synthesis and characterization of CeO2/Bi2O3/gC3N4 ternary Z‐scheme nanocomposite.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2346, doi. 10.1111/ijac.13578

By:

Devi K R, Sunaja;
Mathew, Sandra;
Rajan, Revathy;
Georgekutty, Josna;
Pinheiro, Dephan;
U, Ananthapadmanabhan;
M, Sundararajan

Publication type:

Article

Review on calcium silicate‐based bioceramics in bone tissue engineering.

Published in:

2020

By:

Srinath, Palakurthy;
Abdul Azeem, P.;
Venugopal Reddy, K.

Publication type:

Literature Review

Near‐net shape manufacture of macroporous nanosized alumina monolith by aqueous gel casting method.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2315, doi. 10.1111/ijac.13576

By:

Hosseinzadeh, Fatemeh;
Sarpoolaky, Hossein

Publication type:

Article

Photocatalytic properties of the CeO2‐xTiO2 and TiO2‐xCeO2 (x = 10, 30, and 50 mol%) heterostructures obtained by a MAH.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2376, doi. 10.1111/ijac.13575

By:

Nascimento, Leulomar E.;
Andrade Neto, Nivaldo F.;
Ramalho, Onecima B. M.;
Bomio, Mauricio R. D.;
Motta, Fabiana V.

Publication type:

Article

Low water absorption and pyroplastic deformation of alumina‐strengthened porcelain with petalite and Gairome clay.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2307, doi. 10.1111/ijac.13574

By:

Hao, Dong;
Akatsu, Takashi;
Ohtake, Asami;
Shiraishi, Atsunori;
Kamochi, Nobuaki

Publication type:

Article

Development of precursor ceramics using organic silicon polymer.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2062, doi. 10.1111/ijac.13572

By:

Ishikawa, Toshihiro;
Usukawa, Ryutaro

Publication type:

Article

Electrolytic in‐process dressing grinding performance of a multi‐layer brazed coarse‐grained diamond wheel using an electrolyte containing carbon microspheres.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2286, doi. 10.1111/ijac.13571

By:

Wu, Qiaoping;
Song, Kun;
Ouyang, Zhiyong;
Wang, Yu

Publication type:

Article

C/C‐SiC component for metallic phase change materials.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2040, doi. 10.1111/ijac.13570

By:

Stahl, Veronika;
Shi, Yuan;
Kraft, Werner;
Lanz, Tim;
Vetter, Peter;
Jemmali, Raouf;
Kessel, Fiona;
Koch, Dietmar

Publication type:

Article

Microwave vs conventional porcelain firing: Macroscopic properties.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2277, doi. 10.1111/ijac.13569

By:

Santos, Tiago;
Hennetier, Luc;
Costa, Vítor A. F.;
Costa, Luis C.

Publication type:

Article

Sintering and final properties of kaolinite‐magnesite tapes for the manufacture of cordierite‐mullite ceramics.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2265, doi. 10.1111/ijac.13568

By:

Hammas, Aghiles;
Lecomte‐Nana, Gisèle;
Daou, Imane;
Zibouche, Fatima

Publication type:

Article

Chemical, phase and structural change of mullite synthesized during sintering of kaolin.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2259, doi. 10.1111/ijac.13566

By:

Sanya, Olajide T.;
Owoeye, Seun S.;
Isinkaye, Olanireti E.;
Simon, Olaleye T.

Publication type:

Article

Ecofriendly synthesis of MWCNTs by electric arc in aqueous medium: Comparative study of 6B pencil and mineral graphite.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2357, doi. 10.1111/ijac.13565

By:

Kaufmann, Claudir Gabriel;
Zampiva, Rúbia Young Sun;
Arcaro, Sabrina;
Wermuth, Tiago Bender;
Anzanello, Michel J.;
Acauan, Luiz Henrique;
Alves, Annelise Kopp;
Bergmann, Carlos Pérez;
Mortari, Sergio Roberto

Publication type:

Article

Multi‐wall carbon nanotubes by catalytic decomposition of carbon monoxide on Ni/MgO.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2386, doi. 10.1111/ijac.13564

By:

Lee, Hwanseok;
Kim, Taewoo;
Cho, Dae‐Seung;
Yoon, Sanghyeon;
Shin, Hyun‐Gyoo;
Lee, Heesoo

Publication type:

Article

Effect of high‐energy ball milling on the microstructure and properties of ultrafine gradient cemented carbides.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2298, doi. 10.1111/ijac.13551

By:

Zhou, Xiangkui;
Wang, Renru;
Li, Chensi;
Wang, Xiaobin;
Wang, Kai;
Wang, Qiang

Publication type:

Article

Effective synthesis of green nano‐sized ceramic pigments by co‐doping Zn2+, Cr3+ and Sm3+ into the cobalt‐aluminate.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2368, doi. 10.1111/ijac.13550

By:

Zhang, Yanhui;
Zhao, Yingxian;
Wang, Zhifeng;
Shang, Longan

Publication type:

Article

Evaluation of mechanical and biocompatibility properties of hydroxyapatite/manganese dioxide nanocomposite scaffolds for bone tissue engineering application.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2439, doi. 10.1111/ijac.13549

By:

Azizi, Fatemeh;
Heidari, Fatemeh;
Fahimipour, Farahnaz;
Sajjadnejad, Mohammad;
Vashaee, Daryoosh;
Tayebi, Lobat

Publication type:

Article

Properties of C/C‐SiC composites produced via transfer moulding and inner siliconization.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2137, doi. 10.1111/ijac.13548

By:

Ahmad, Husam;
Stiller, Jonas;
Päßler, Erik;
Nestler, Daisy;
Kroll, Lothar;
Wagner, Guntram

Publication type:

Article

Preparation of Al2O3‐mullite thermal insulation materials with AlF3 and SiC as aids by microwave sintering.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2250, doi. 10.1111/ijac.13547

By:

Fan, Shuheng;
Zheng, Han;
Gao, Qiancheng;
Li, Yang;
Chen, Yongqiang;
Liu, Guoqi;
Fan, Bingbing;
Zhang, Rui

Publication type:

Article

Impact of Mg‐Zr substitution on the magnetic and microwave absorption properties of BaFe12‐2xMgxZrxO19 (0.25 ≤ x ≤ 1.5).

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2240, doi. 10.1111/ijac.13546

By:

Beheshti, Kobra Alsadat;
Yousefi, Mohammad

Publication type:

Article

Research of laser remelting on the thermal‐mechanical behaviors and heat treatment of yttria‐stabilized zirconia coatings.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2171, doi. 10.1111/ijac.13545

By:

Yi, Peng;
Zhu, Xiaoye;
Jiang, Yongliang;
Feng, Wenlong;
Feng, Zhihao;
Jin, Yanchao;
Dong, Guixin

Publication type:

Article

Corrosion resistance and cleanability of glazed surface.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2162, doi. 10.1111/ijac.13544

By:

Wang, Shaohua;
Li, Xiaonv;
Wang, Yongqing;
Wu, Jianqing

Publication type:

Article

Synthesis and mechanical properties of lightweight hybrid geopolymer foams reinforced with carbon nanotubes.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2335, doi. 10.1111/ijac.13543

By:

Yan, Shu;
Zhang, Fanyong;
Li, Haochen;
Gao, Bo;
Xing, Pengfei;
He, Peigang;
Jia, Dechang

Publication type:

Article

Improved stress measurement of YSZ by Raman spectroscopy: Effect of yttrium segregation‐dependent tetragonality.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2416, doi. 10.1111/ijac.13542

By:

Cai, Huangyue;
Zhang, Xing;
Hu, Li;
Guo, Fangwei;
Wang, Xin;
Zhao, Xiaofeng;
Ni, Na;
Xiao, Ping

Publication type:

Article

Phase and microstructural evolution of BaZrO3‐CaZrO3 refractory and its interaction with titanium alloy melt.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2193, doi. 10.1111/ijac.13541

By:

Lan, Baobao;
Chen, Guangyao;
Xiao, Yubin;
Feng, Qisheng;
Lu, Xionggang;
Li, Chonghe

Publication type:

Article

Investigation of structural, optical, electrical, and magnetic properties of Fe‐doped La0.7Sr0.3MnO3 manganites.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2430, doi. 10.1111/ijac.13540

By:

Hassan, Abdullah Ameen Saad;
Khan, Wasi;
Husain, Shahid;
Dhiman, Pooja;
Singh, Mahavir

Publication type:

Article

Fatigue of a SiC/SiC ceramic composite with an ytterbium‐disilicate environmental barrier coating at elevated temperature.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2074, doi. 10.1111/ijac.13539

By:

Ruggles‐Wrenn, Marina B.;
Williams, Thaddeus M.

Publication type:

Article

Novel design of microsphere adsorbent for efficient heavy metals adsorption.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2228, doi. 10.1111/ijac.13538

By:

Wang, Lu;
Liu, Jingjing;
Rong, Yedong;
Yan, Shu;
Yu, Man;
Li, Xinglin;
Wang, Zhaoqing;
Zhang, Tianhe;
Yang, Jinlong

Publication type:

Article

Doping level effects in Nb self‐doped Bi3TiNbO9 high‐temperature piezoceramics with improved electrical properties.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2407, doi. 10.1111/ijac.13537

By:

Zhang, Yuhao;
Huang, Peiming;
Zhu, Lingli;
Du, Juan;
Bai, Wangfeng;
Lin, Mi;
Zheng, Peng;
Zheng, Liang;
Zhang, Yang

Publication type:

Article

Thermal, mechanical, and electrical properties of LSCo/mullite composite contact materials for solid oxide fuel cells.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2051, doi. 10.1111/ijac.13536

By:

Chou, Yeong‐Shyung;
Canfield, Nathan;
Bonnett, Jeff F.;
Hardy, John S.;
Stevenson, Jeffry W.

Publication type:

Article

General method for highly controlled preparation of ceramic hollow spheres from core‐shell structures.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2220, doi. 10.1111/ijac.13535

By:

Zhang, Feng;
Yang, Xu;
Wang, Peng;
Zhong, Yajuan;
Guo, Manshan;
Lin, Jun;
Zhu, Zhiyong;
You, Yan;
Lu, Junqiang;
Zhu, Libing

Publication type:

Article

Advancing spray granulation by ultrasound atomization.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2212, doi. 10.1111/ijac.13534

By:

Höhne, Patrick;
Mieller, Bjoern;
Rabe, Torsten

Publication type:

Article

Intrinsic microstructural anisotropy in tape cast ceramics by ice templating.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2202, doi. 10.1111/ijac.13533

By:

Heywood, Stephen K.;
Romanenko, Konstantin;
Sofie, Stephen W.;
Codd, Sarah L.

Publication type:

Article

A different chemical route to prepare hafnium diboride‐based nanofibers: Effect of chemical composition.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2123, doi. 10.1111/ijac.13532

By:

Ghelich, Raziyeh;
Abdizadeh, Hossein;
Jahannama, Mohammad Reza;
Torknik, Fatemeh Sadat;
Vaezi, Mohammad Reza

Publication type:

Article

Degradation of Al2O3f/SiO2 composites exposed to Na2SO4 environment and MMH/N2O4 bipropellants test.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2114, doi. 10.1111/ijac.13528

By:

Yang, Xiang;
Jin, Wen;
Yi, Wang;
Cheng‐xin, Zhu;
Yu‐lin, Zhu;
Rong‐jun, Liu;
Feng, Cao

Publication type:

Article

Microstructure and properties of porous anorthite/mullite whiskers ceramics with high porosity.

Published in:

International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2104, doi. 10.1111/ijac.13525

By:

Wu, LingHao;
Li, CuiWei;
Li, Hao;
Li, ShiBo;
Wang, Chang‐an

Publication type:

Article

Issue Information.

Published in:: International Journal of Applied Ceramic Technology, 2020, v. 17, n. 5, p. 2037, doi. 10.1111/ijac.13286
Publication type:: Article