Works matching IS 1546542X AND DT 2018 AND VI 15 AND IP 6

Results: 33

Back Cover, Volume 15, Issue 6.

Published in:: International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. ii, doi. 10.1111/ijac.13105
Publication type:: Article

A study on the effect of compositing silver oxide nanoparticles by carbon on the ‎electrochemical behavior and electronic properties of zinc‐silver oxide batteries ‎.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1446, doi. 10.1111/ijac.13047

By:

Sabzi, Masoud;
Mersagh Dezfuli, Saeid

Publication type:

Article

Cost‐effective porous ceramic tubes fabricated through a phase inversion/casting process using calcined bauxite.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1567, doi. 10.1111/ijac.13046

By:

Zhu, Zhiwen;
Cao, Yanxin;
Dong, Xudong;
Meng, Xiangeng;
Zhao, Yujun;
Ding, Zhijie;
Wei, Zhaoling

Publication type:

Article

Synthesis of novel low‐cost porous gangue microsphere/geopolymer composites and their adsorption properties for dyes.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1602, doi. 10.1111/ijac.13045

By:

Yan, Shu;
He, Peigang;
Jia, Dechang;
Wang, Qinggang;
Liu, Jingjing;
Yang, Jinlong;
Huang, Yong

Publication type:

Article

Preparation of porous Al2O3 ceramics by starch consolidation casting method.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1550, doi. 10.1111/ijac.13043

By:

Chen, Zhiwei;
Xu, Guogang;
Cui, Hongzhi;
Zhang, Xueying;
Zhan, Xiaoyuan

Publication type:

Article

Restraining of calcium contamination in near‐net shape alumina ceramics during slip casting.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1559, doi. 10.1111/ijac.13042

By:

Drdlik, Daniel;
Rolecek, Jakub;
Drdlikova, Katarina;
Salamon, David

Publication type:

Article

Effect of nonstoichiometry on mechanical properties of reactive hot‐pressed monolithic ZrCx Ceramic.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1366, doi. 10.1111/ijac.13041

By:

Kannan, Rajaguru;
Venkateswarlu, Karodi;
Rangaraj, Lingappa

Publication type:

Article

Analytical estimation of fracture toughness for circumferential cracks in thin hard films on ductile substrates.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1407, doi. 10.1111/ijac.13028

By:

Azizpour, Ahmad;
Soleymani, Asma;
Poursaeidi, Esmaeil

Publication type:

Article

Thermal shock resistance of the porous boron nitride/silicon oxynitride ceramic composites.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1358, doi. 10.1111/ijac.13026

By:

Sun, Yangshan;
Cai, Delong;
Yang, Zhihua;
Li, Qian;
Li, Hailiang;
Jia, Dechang;
Zhou, Yu

Publication type:

Article

NIR photoluminescence and radioluminescence characteristics of Nd3+ doped BaTa2O6 phosphor.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1594, doi. 10.1111/ijac.13025

By:

İlhan, Mustafa;
Keskin, İlker Çetin;
Çatalgöl, Zarif;
Samur, Ramazan

Publication type:

Article

Effect of magnesium source on the fabrication of kotoite Mg3B2O6 ceramic.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1584, doi. 10.1111/ijac.13024

By:

Morkan, Ayse;
Gul, Esra;
Morkan, İzzet;
Kahveci, Gülden

Publication type:

Article

Residual thermal stresses prediction for CVD coating/substrate system based on a numerical model.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1397, doi. 10.1111/ijac.13023

By:

Wang, Yang;
Chen, Zhaofeng;
Pan, Ning;
Li, Binbin;
Yu, Shengjie;
Cui, Sheng

Publication type:

Article

Effects of metal doping agent on the properties of Nb2−xMxO5 (M = Mn, Fe, and Ni) system.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1577, doi. 10.1111/ijac.13022

By:

Raba, Angela;
Barba‐Ortega, José;
Joya, Miryam

Publication type:

Article

Properties and microstructural aspects of TiO2‐doped sintered Alumina‐Zirconia composite ceramics.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1532, doi. 10.1111/ijac.13021

By:

Khaskhoussi, Amani;
Bouhamed, Hazem;
Calabrese, Luigi;
Proverbio, Edoardo;
Bouaziz, Jamel

Publication type:

Article

Quality assessment of hydroxyapatite derived from bovine bone wastes.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1439, doi. 10.1111/ijac.13020

By:

Inyang, Adijat Omowumi;
Ibitoye, Simeon Ademola

Publication type:

Article

Tetragonality enhancement in BaTiO3 by mechanical activation of the starting BaCO3 and TiO2 powders: Characterization of the contribution of the mechanical activation and postmilling calcination phenomena.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1518, doi. 10.1111/ijac.13019

By:

Moghtada, Abdolmajid;
Heidary Moghadam, Ali;
Ashiri, Rouholah

Publication type:

Article

Improving the ceramic yield of polycarbosilane by radiation cross‐linking in the presence of multifunctional monomers.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1510, doi. 10.1111/ijac.13018

By:

Zhou, Lulu;
Cheng, Yong;
Zhang, Wenfa;
Zhang, Wenli;
Liu, Weihua;
Li, Yunbo;
Wang, Mouhua

Publication type:

Article

High temperature anti‐oxidation behavior of in situ and ex situ nanostructured C/SiC/ZrB2‐SiC gradient coatings: Thermodynamical evolution, microstructural characterization, and residual stress analysis.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1319, doi. 10.1111/ijac.13017

By:

Abdollahi, Alireza;
Valefi, Zia;
Ehsani, Naser;
Torabi, Shahla

Publication type:

Article

Microstructure and properties of high alumina castables containing calcium alumino‐titanate.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1478, doi. 10.1111/ijac.13016

By:

Chen, Jianwei;
Zhao, Huizhong;
Zhang, Han;
Li, Zhengkun;
Zhang, Jiaqin

Publication type:

Article

Photocatalytic activity of TiO2 coated porous silica beads on degradation of cumene hydroperoxide.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1542, doi. 10.1111/ijac.13015

By:

Pinato, Kamonwan;
Suttiponparnit, Komkrit;
Panpa, Withaya;
Jinawath, Supatra;
Kashima, Dujreutai

Publication type:

Article

Ferrimagnetic wollastonite ceramics based on waste valorization.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1484, doi. 10.1111/ijac.13014

By:

González‐Triviño, Isabel;
Benítez‐Guerrero, Mónica;
Moreno, Belén;
Pascual‐Cosp, José

Publication type:

Article

Effect of surrounding polydimethylsiloxane frame and substrate on drying behavior of aqueous alumina suspensions.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1502, doi. 10.1111/ijac.13013

By:

Jiao, Lanqing;
Su, Bo;
Meng, Junhu;
Han, Jiesheng;
Wang, Honggang

Publication type:

Article

Single‐step fabrication of an anode supported planar single‐chamber solid oxide fuel cell.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1375, doi. 10.1111/ijac.13012

By:

Sayan, Yunus;
Venkatesan, Vijay;
Guk, Erdogan;
Wu, Houzheng;
Kim, Jung‐Sik

Publication type:

Article

Phase composition, structural, and plasma erosion properties of ceramic coating prepared by suspension plasma spraying.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1388, doi. 10.1111/ijac.13011

By:

Zhao, Dong;
Wang, ChuanYang;
Chen, Yao;
Wang, YongGuang

Publication type:

Article

Interlaboratory round robin study on axial tensile properties of SiC‐SiC CMC tubular test specimens.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1334, doi. 10.1111/ijac.13010

By:

Singh, Gyanender;
Gonczy, Steve;
Deck, Christian;
Lara‐Curzio, Edgar;
Katoh, Yutai

Publication type:

Article

Dissolution of BaZrO3 refractory in titanium melt.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1459, doi. 10.1111/ijac.13009

By:

Chen, Guangyao;
Kang, Juyun;
Gao, Pengyue;
Qin, Ziwei;
Lu, Xionggang;
Li, Chonghe

Publication type:

Article

Influence of alumina binders on adhesion and cohesion during preparation of Cu‐SAPO‐34/monolith catalysts.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1490, doi. 10.1111/ijac.13008

By:

Kong, Xiangli;
Qiu, Minghui;
Wang, Anran;
Yang, Lu;
Zhou, Rongfei;
Fan, Yiqun;
Kong, Deshuang;
Gu, Changjun

Publication type:

Article

Bone Regeneration in rat using a gelatin/bioactive glass nanocomposite scaffold along with endothelial cells (HUVECs).

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1427, doi. 10.1111/ijac.12907

By:

Kazemi, Mansure;
Azami, Mahmoud;
Johari, Behrooz;
Ahmadzadehzarajabad, Maryam;
Nazari, Bahareh;
Kargozar, Saeid;
Hajighasemlou, Saieh;
Mozafari, Masoud;
Soleimani, Mansooreh;
Samadikuchaksaraei, Ali;
Farajollahi, Mohammad

Publication type:

Article

Light‐weight thermal insulating fly ash cenosphere ceramics.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1467, doi. 10.1111/ijac.12906

By:

Urunkar, Yogesh;
Pandit, Aniruddha;
Bhargava, Parag;
Joshi, Jyeshtharaj;
Mathpati, Channamallikarjun;
Vasanthakumaran, Sudarsan;
Jain, Dheeraj;
Hussain, Zakir;
Patel, Shirish;
More, Venumadhav

Publication type:

Article

The effect of substrate temperature on microstructural evolution and hardenability of tungsten carbide coating in hot filament chemical vapor deposition.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1350, doi. 10.1111/ijac.12905

By:

Sabzi, Masoud;
Mousavi Anijdan, Seyyed Hashem;
Asadian, Mohsen

Publication type:

Article

Processing, structural, and biological evaluations of zirconia scaffolds coated by fluorapatite.

Published in:

International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1415, doi. 10.1111/ijac.12904

By:

León, Beltina;
Albano, María;
Garrido, Liliana;
Ferraz, Emanuela;
Rosa, Adalberto;
Tambasco de Oliveira, Paulo

Publication type:

Article

Issue Information.

Published in:: International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. 1317, doi. 10.1111/ijac.12787
Publication type:: Article

Cover Image, Volume 15, Issue 6.

Published in:: International Journal of Applied Ceramic Technology, 2018, v. 15, n. 6, p. i, doi. 10.1111/ijac.12786
Publication type:: Article

Works matching IS 1546542X AND DT 2018 AND VI 15 AND IP 6

Back Cover, Volume 15, Issue 6.

A study on the effect of compositing silver oxide nanoparticles by carbon on the ‎electrochemical behavior and electronic properties of zinc‐silver oxide batteries ‎.

Cost‐effective porous ceramic tubes fabricated through a phase inversion/casting process using calcined bauxite.

Synthesis of novel low‐cost porous gangue microsphere/geopolymer composites and their adsorption properties for dyes.

Preparation of porous Al<sub>2</sub>O<sub>3</sub> ceramics by starch consolidation casting method.

Restraining of calcium contamination in near‐net shape alumina ceramics during slip casting.

Effect of nonstoichiometry on mechanical properties of reactive hot‐pressed monolithic ZrC<sub>x</sub> Ceramic.

Analytical estimation of fracture toughness for circumferential cracks in thin hard films on ductile substrates.

Thermal shock resistance of the porous boron nitride/silicon oxynitride ceramic composites.

NIR photoluminescence and radioluminescence characteristics of Nd<sup>3+</sup> doped BaTa<sub>2</sub>O<sub>6</sub> phosphor.

Effect of magnesium source on the fabrication of kotoite Mg<sub>3</sub>B<sub>2</sub>O<sub>6</sub> ceramic.

Residual thermal stresses prediction for CVD coating/substrate system based on a numerical model.

Effects of metal doping agent on the properties of Nb<sub>2−</sub><sub>x</sub>M<sub>x</sub>O<sub>5</sub> (M = Mn, Fe, and Ni) system.

Properties and microstructural aspects of TiO<sub>2</sub>‐doped sintered Alumina‐Zirconia composite ceramics.

Quality assessment of hydroxyapatite derived from bovine bone wastes.

Tetragonality enhancement in BaTiO<sub>3</sub> by mechanical activation of the starting BaCO<sub>3</sub> and TiO<sub>2</sub> powders: Characterization of the contribution of the mechanical activation and postmilling calcination phenomena.

Improving the ceramic yield of polycarbosilane by radiation cross‐linking in the presence of multifunctional monomers.

High temperature anti‐oxidation behavior of in situ and ex situ nanostructured C/SiC/ZrB<sub>2</sub>‐SiC gradient coatings: Thermodynamical evolution, microstructural characterization, and residual stress analysis.

Microstructure and properties of high alumina castables containing calcium alumino‐titanate.

Photocatalytic activity of TiO<sub>2</sub> coated porous silica beads on degradation of cumene hydroperoxide.

Ferrimagnetic wollastonite ceramics based on waste valorization.

Effect of surrounding polydimethylsiloxane frame and substrate on drying behavior of aqueous alumina suspensions.

Single‐step fabrication of an anode supported planar single‐chamber solid oxide fuel cell.

Phase composition, structural, and plasma erosion properties of ceramic coating prepared by suspension plasma spraying.

Interlaboratory round robin study on axial tensile properties of SiC‐SiC CMC tubular test specimens.

Dissolution of BaZrO<sub>3</sub> refractory in titanium melt.

Influence of alumina binders on adhesion and cohesion during preparation of Cu‐SAPO‐34/monolith catalysts.

Bone Regeneration in rat using a gelatin/bioactive glass nanocomposite scaffold along with endothelial cells (HUVECs).

Light‐weight thermal insulating fly ash cenosphere ceramics.

The effect of substrate temperature on microstructural evolution and hardenability of tungsten carbide coating in hot filament chemical vapor deposition.

Processing, structural, and biological evaluations of zirconia scaffolds coated by fluorapatite.

Issue Information.

Cover Image, Volume 15, Issue 6.