Works matching IS 1546542X AND DT 2015 AND VI 12 AND IP 1

Results: 30

Sodium Excess Ta-Modified (K0.5Na0.5)NbO3 Ceramics Prepared by Reactive Template Grain Growth Method.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 228, doi. 10.1111/ijac.12150

By:

Hussain, Ali;
Maqbool, Adnan;
Kim, Jin Soo;
Song, Tae Kwon;
Kim, Myong Ho;
Kim, Won Jong;
Kim, Sang Su

Publication type:

Article

The Influence of Platelet-Like LaMgAl11O19 on the Toughness of 3 mol% Yttria Partially Stabilized Zirconia Ceramic.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 176, doi. 10.1111/ijac.12177

By:

Min, Xin;
Huang, Zhaohui;
Fang, Minghao;
Liu, Yan'gai;
Gao, Yuanfei;
Liu, Fengjiao;
Hu, Meiling;
Tang, Chao;
Qian, Tingting

Publication type:

Article

The Effects of Calcium-to-Phosphorus Ratio on the Densification and Mechanical Properties of Hydroxyapatite Ceramic.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 223, doi. 10.1111/ijac.12249

By:

Tan, Chou Yong;
Singh, Ramesh;
Teh, Yee Ching;
Tan, Yoke Meng;
Yap, Boon Kar

Publication type:

Article

Investigation of Glaze Layer Formation on Green Ceramic Bodies.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 81, doi. 10.1111/ijac.12122

By:

Fischer, Undine;
Chaves, Humberto;
Aneziris, Christos G.;
Schmidt, Gert

Publication type:

Article

Electrochemical Deposition of 58SiO2-33CaO-9P2O5 Nanobioactive Glass Particles on Ti-6Al-4V Alloy for Biomedical Applications.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 95, doi. 10.1111/ijac.12124

By:

Saravanakumar, Balasubramaniam;
Prabhu, Muthusamy;
Rajendran, Venkatachalam;
Gopal, Judy;
Mudali, Uthandi Kamachi

Publication type:

Article

Flexible 0-3 Ceramic-Polymer Composites of Barium Titanate and Epoxidized Natural Rubber.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 106, doi. 10.1111/ijac.12129

By:

Salaeh, Subhan;
Boiteux, Gisèle;
Cassagnau, Philippe;
Nakason, Charoen

Publication type:

Article

Effect of Gray Scale Binder Levels on Additive Manufacturing of Porous Scaffolds with Heterogeneous Properties.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 62, doi. 10.1111/ijac.12316

By:

Vlasea, Mihaela;
Toyserkani, Ehsan;
Pilliar, Robert

Publication type:

Article

Additive Manufacturing of Dense Alumina Ceramics.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 1, doi. 10.1111/ijac.12319

By:

Schwentenwein, Martin;
Homa, Johannes

Publication type:

Article

Humidity Sensing Property of NaCl-Added Mesoporous Silica Synthesized by a Facile Way with Low Energy Cost.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 169, doi. 10.1111/ijac.12140

By:

Geng, Wangchang;
Zhou, Lunwei;
Duan, Libing;
Gu, Junwei;
Zhang, Qiuyu;
Yuan, Qing;
Jiang, Xingmao

Publication type:

Article

Comparative In Vitro Osteoinductivity Study of HA and α- TCP/ HA Bicalcium Phosphate.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 192, doi. 10.1111/ijac.12141

By:

Chan, Yu‐Hao;
Chang, Yushan‐Sophie;
Shen, Yun‐Dun;
Yang, Tzu‐Sen;
Ou, Shih‐Fu;
Hsu, Ya‐Ju;
Huang, Mao‐Suan;
Ou, Keng‐Liang

Publication type:

Article

In Situ Foaming of Porous ( La0.6 Sr0.4)0.98 ( Co0.2 Fe0.8) O3−δ ( LSCF) Cathodes for Solid Oxide Fuel Cell Applications.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 199, doi. 10.1111/ijac.12142

By:

Gandavarapu, Sodith;
Sabolsky, Edward;
Sabolsky, Katarzyna;
Gerdes, Kirk

Publication type:

Article

Use of Electrophoretic Impregnation and Vacuum Bagging to Impregnate SiC Powder into SiC Fiber Preforms.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 212, doi. 10.1111/ijac.12143

By:

Binner, Jon;
Vaidhyanathan, Bala;
Jaglin, David;
Needham, Sarah

Publication type:

Article

Medium Density Fiberboard Machining and Wear Behavior of Injection-Molded Ceramic Composite Wood Cutting Tools.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 147, doi. 10.1111/ijac.12144

By:

Sommer, Frank;
Talpeanu, Dan;
Kern, Frank;
Gadow, Rainer;
Heisel, Uwe

Publication type:

Article

Selective Laser Melting of Soda-Lime Glass Powder.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 53, doi. 10.1111/ijac.12338

By:

Fateri, Miranda;
Gebhardt, Andreas

Publication type:

Article

Slurry-Based Additive Manufacturing of Ceramics.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 18, doi. 10.1111/ijac.12113

By:

Mühler, Thomas;
Gomes, Cynthia M.;
Heinrich, Jürgen;
Günster, Jens

Publication type:

Article

Thermoplastic 3D Printing-An Additive Manufacturing Method for Producing Dense Ceramics.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 26, doi. 10.1111/ijac.12306

By:

Scheithauer, Uwe;
Schwarzer, Eric;
Richter, Hans‐Jürgen;
Moritz, Tassilo

Publication type:

Article

Additive Manufacturing of Graphene-Hydroxyapatite Nanocomposite Structures.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 8, doi. 10.1111/ijac.12309

By:

Azhari, Amir;
Toyserkani, Ehsan;
Villain, Carole

Publication type:

Article

Cover Image, Volume 12, Issue 1.

Published in:: International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. i, doi. 10.1111/ijac.12371
Publication type:: Article

Back Cover, Volume 12, Issue 1.

Published in:: International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. ii, doi. 10.1111/ijac.12372
Publication type:: Article

Optical and Microwave Dielectric Properties of Zn-Doped Mg Al2 O4 Transparent Ceramics Fabricated by Spark Plasma Sintering.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 116, doi. 10.1111/ijac.12130

By:

Fu, Ping;
Xu, Yong;
Lu, Wenzhong;
Lei, Wen;
Wang, Xuehua;
Ruan, Xuefeng

Publication type:

Article

Effect of Temperature on Structural and Optical Properties of Boehmite Nanostructure.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 124, doi. 10.1111/ijac.12133

By:

Rani, Geeta;
Sahare, Purushottam Dinanath

Publication type:

Article

Novel Utilization of Fly Ash for High-Temperature Mortars: Phase Composition, Microstructure and Performances Correlation.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 133, doi. 10.1111/ijac.12135

By:

Terzić, Anja;
Pavlović, Ljubica;
Radojević, Zagorka;
Pavlović, Vladimir;
Mitić, Vojislav

Publication type:

Article

Investigation on CuCa3Ti4O12 Modified BiFeO3-Based Perovskite Ceramics.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 157, doi. 10.1111/ijac.12138

By:

Wang, Ben;
Gong, Lixiu;
Wang, Shumei;
Zhou, Zhufa;
Ma, Guilin

Publication type:

Article

Doping Effects on the Crystal Structure and Electrochemical Performance of LiFePO4/C.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 163, doi. 10.1111/ijac.12139

By:

Yang, Yang;
Li, Kezhi;
Li, Hejun

Publication type:

Article

Three-Dimensional Stereolithography of Alumina Photonic Crystals for Terahertz Wave Localization.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 32, doi. 10.1111/ijac.12320

By:

Kirihara, Soshu;
Niki, Toshiki

Publication type:

Article

Near-Net-Shape Fabrication of Ti3 Si C2-based Ceramics by Three-Dimensional Printing.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 71, doi. 10.1111/ijac.12321

By:

Ma, Yuzhao;
Yin, Xiaowei;
Fan, Xiaomeng;
Wang, Lei;
Greil, Peter;
Travitzky, Nahum

Publication type:

Article

Stereolithographic Ceramic Manufacturing of High Strength Bioactive Glass.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 38, doi. 10.1111/ijac.12325

By:

Gmeiner, Robert;
Mitteramskogler, Gerald;
Stampfl, Jürgen;
Boccaccini, Aldo R.

Publication type:

Article

Process Parameters Development of Selective Laser Melting of Lunar Regolith for On-Site Manufacturing Applications.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 46, doi. 10.1111/ijac.12326

By:

Fateri, Miranda;
Gebhardt, Andreas

Publication type:

Article

Influence of ZrO2 Content on the Performances of BN-ZrO2-SiC Composites for Application in the Steel Industry.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 184, doi. 10.1111/ijac.12203

By:

Chen, Lei;
Wang, Yujin;
Rao, Jiancun;
Zhou, Yu

Publication type:

Article

Development and Characterization of Continuous SiC Fiber-Reinforced HfB2-Based UHTC Matrix Composites Using Polymer Impregnation and Slurry Infiltration Techniques.

Published in:

International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 235, doi. 10.1111/ijac.12279

By:

Leslie, Clifford J.;
Boakye, Emmanuel E.;
Keller, Kristin A.;
Cinibulk, Michael K.

Publication type:

Article

Works matching IS 1546542X AND DT 2015 AND VI 12 AND IP 1

Sodium Excess Ta-Modified (K<sub>0.5</sub>Na<sub>0.5</sub>)NbO<sub>3</sub> Ceramics Prepared by Reactive Template Grain Growth Method.

The Influence of Platelet-Like LaMgAl<sub>11</sub>O<sub>19</sub> on the Toughness of 3 mol% Yttria Partially Stabilized Zirconia Ceramic.

The Effects of Calcium-to-Phosphorus Ratio on the Densification and Mechanical Properties of Hydroxyapatite Ceramic.

Investigation of Glaze Layer Formation on Green Ceramic Bodies.

Electrochemical Deposition of 58SiO<sub>2</sub>-33CaO-9P<sub>2</sub>O<sub>5</sub> Nanobioactive Glass Particles on Ti-6Al-4V Alloy for Biomedical Applications.

Flexible 0-3 Ceramic-Polymer Composites of Barium Titanate and Epoxidized Natural Rubber.

Effect of Gray Scale Binder Levels on Additive Manufacturing of Porous Scaffolds with Heterogeneous Properties.

Additive Manufacturing of Dense Alumina Ceramics.

Humidity Sensing Property of NaCl-Added Mesoporous Silica Synthesized by a Facile Way with Low Energy Cost.

Comparative In Vitro Osteoinductivity Study of HA and α- TCP/ HA Bicalcium Phosphate.

In Situ Foaming of Porous ( La<sub>0.6</sub> Sr<sub>0.4</sub>)<sub>0.98</sub> ( Co<sub>0.2</sub> Fe<sub>0.8</sub>) O<sub>3−δ</sub> ( LSCF) Cathodes for Solid Oxide Fuel Cell Applications.

Use of Electrophoretic Impregnation and Vacuum Bagging to Impregnate SiC Powder into SiC Fiber Preforms.

Medium Density Fiberboard Machining and Wear Behavior of Injection-Molded Ceramic Composite Wood Cutting Tools.

Selective Laser Melting of Soda-Lime Glass Powder.

Slurry-Based Additive Manufacturing of Ceramics.

Thermoplastic 3D Printing-An Additive Manufacturing Method for Producing Dense Ceramics.

Additive Manufacturing of Graphene-Hydroxyapatite Nanocomposite Structures.

Cover Image, Volume 12, Issue 1.

Back Cover, Volume 12, Issue 1.

Optical and Microwave Dielectric Properties of Zn-Doped Mg Al<sub>2</sub> O<sub>4</sub> Transparent Ceramics Fabricated by Spark Plasma Sintering.

Effect of Temperature on Structural and Optical Properties of Boehmite Nanostructure.

Novel Utilization of Fly Ash for High-Temperature Mortars: Phase Composition, Microstructure and Performances Correlation.

Investigation on CuCa<sub>3</sub>Ti<sub>4</sub>O<sub>12</sub> Modified BiFeO<sub>3</sub>-Based Perovskite Ceramics.

Doping Effects on the Crystal Structure and Electrochemical Performance of LiFePO<sub>4</sub>/C.

Three-Dimensional Stereolithography of Alumina Photonic Crystals for Terahertz Wave Localization.

Near-Net-Shape Fabrication of Ti<sub>3</sub> Si C<sub>2</sub>-based Ceramics by Three-Dimensional Printing.

Stereolithographic Ceramic Manufacturing of High Strength Bioactive Glass.

Process Parameters Development of Selective Laser Melting of Lunar Regolith for On-Site Manufacturing Applications.

Influence of ZrO<sub>2</sub> Content on the Performances of BN-ZrO<sub>2</sub>-SiC Composites for Application in the Steel Industry.

Development and Characterization of Continuous SiC Fiber-Reinforced HfB<sub>2</sub>-Based UHTC Matrix Composites Using Polymer Impregnation and Slurry Infiltration Techniques.