Works matching IS 1546542X AND DT 2015 AND VI 12 AND IP 1

Results: 30

Sodium Excess Ta-Modified (K0.5Na0.5)NbO3 Ceramics Prepared by Reactive Template Grain Growth Method.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 228, doi. 10.1111/ijac.12150
By:
- Hussain, Ali;
- Maqbool, Adnan;
- Kim, Jin Soo;
- Song, Tae Kwon;
- Kim, Myong Ho;
- Kim, Won Jong;
- Kim, Sang Su
Publication type:
Article
The Influence of Platelet-Like LaMgAl11O19 on the Toughness of 3 mol% Yttria Partially Stabilized Zirconia Ceramic.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 176, doi. 10.1111/ijac.12177
By:
- Min, Xin;
- Huang, Zhaohui;
- Fang, Minghao;
- Liu, Yan'gai;
- Gao, Yuanfei;
- Liu, Fengjiao;
- Hu, Meiling;
- Tang, Chao;
- Qian, Tingting
Publication type:
Article
The Effects of Calcium-to-Phosphorus Ratio on the Densification and Mechanical Properties of Hydroxyapatite Ceramic.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 223, doi. 10.1111/ijac.12249
By:
- Tan, Chou Yong;
- Singh, Ramesh;
- Teh, Yee Ching;
- Tan, Yoke Meng;
- Yap, Boon Kar
Publication type:
Article
Investigation of Glaze Layer Formation on Green Ceramic Bodies.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 81, doi. 10.1111/ijac.12122
By:
- Fischer, Undine;
- Chaves, Humberto;
- Aneziris, Christos G.;
- Schmidt, Gert
Publication type:
Article
Electrochemical Deposition of 58SiO2-33CaO-9P2O5 Nanobioactive Glass Particles on Ti-6Al-4V Alloy for Biomedical Applications.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 95, doi. 10.1111/ijac.12124
By:
- Saravanakumar, Balasubramaniam;
- Prabhu, Muthusamy;
- Rajendran, Venkatachalam;
- Gopal, Judy;
- Mudali, Uthandi Kamachi
Publication type:
Article
Flexible 0-3 Ceramic-Polymer Composites of Barium Titanate and Epoxidized Natural Rubber.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 106, doi. 10.1111/ijac.12129
By:
- Salaeh, Subhan;
- Boiteux, Gisèle;
- Cassagnau, Philippe;
- Nakason, Charoen
Publication type:
Article
Effect of Gray Scale Binder Levels on Additive Manufacturing of Porous Scaffolds with Heterogeneous Properties.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 62, doi. 10.1111/ijac.12316
By:
- Vlasea, Mihaela;
- Toyserkani, Ehsan;
- Pilliar, Robert
Publication type:
Article
Additive Manufacturing of Dense Alumina Ceramics.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 1, doi. 10.1111/ijac.12319
By:
- Schwentenwein, Martin;
- Homa, Johannes
Publication type:
Article
Humidity Sensing Property of NaCl-Added Mesoporous Silica Synthesized by a Facile Way with Low Energy Cost.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 169, doi. 10.1111/ijac.12140
By:
- Geng, Wangchang;
- Zhou, Lunwei;
- Duan, Libing;
- Gu, Junwei;
- Zhang, Qiuyu;
- Yuan, Qing;
- Jiang, Xingmao
Publication type:
Article
Comparative In Vitro Osteoinductivity Study of HA and α- TCP/ HA Bicalcium Phosphate.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 192, doi. 10.1111/ijac.12141
By:
- Chan, Yu‐Hao;
- Chang, Yushan‐Sophie;
- Shen, Yun‐Dun;
- Yang, Tzu‐Sen;
- Ou, Shih‐Fu;
- Hsu, Ya‐Ju;
- Huang, Mao‐Suan;
- Ou, Keng‐Liang
Publication type:
Article
In Situ Foaming of Porous ( La0.6 Sr0.4)0.98 ( Co0.2 Fe0.8) O3−δ ( LSCF) Cathodes for Solid Oxide Fuel Cell Applications.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 199, doi. 10.1111/ijac.12142
By:
- Gandavarapu, Sodith;
- Sabolsky, Edward;
- Sabolsky, Katarzyna;
- Gerdes, Kirk
Publication type:
Article
Use of Electrophoretic Impregnation and Vacuum Bagging to Impregnate SiC Powder into SiC Fiber Preforms.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 212, doi. 10.1111/ijac.12143
By:
- Binner, Jon;
- Vaidhyanathan, Bala;
- Jaglin, David;
- Needham, Sarah
Publication type:
Article
Medium Density Fiberboard Machining and Wear Behavior of Injection-Molded Ceramic Composite Wood Cutting Tools.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 147, doi. 10.1111/ijac.12144
By:
- Sommer, Frank;
- Talpeanu, Dan;
- Kern, Frank;
- Gadow, Rainer;
- Heisel, Uwe
Publication type:
Article
Selective Laser Melting of Soda-Lime Glass Powder.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 53, doi. 10.1111/ijac.12338
By:
- Fateri, Miranda;
- Gebhardt, Andreas
Publication type:
Article
Slurry-Based Additive Manufacturing of Ceramics.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 18, doi. 10.1111/ijac.12113
By:
- Mühler, Thomas;
- Gomes, Cynthia M.;
- Heinrich, Jürgen;
- Günster, Jens
Publication type:
Article
Thermoplastic 3D Printing-An Additive Manufacturing Method for Producing Dense Ceramics.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 26, doi. 10.1111/ijac.12306
By:
- Scheithauer, Uwe;
- Schwarzer, Eric;
- Richter, Hans‐Jürgen;
- Moritz, Tassilo
Publication type:
Article
Additive Manufacturing of Graphene-Hydroxyapatite Nanocomposite Structures.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 8, doi. 10.1111/ijac.12309
By:
- Azhari, Amir;
- Toyserkani, Ehsan;
- Villain, Carole
Publication type:
Article
Cover Image, Volume 12, Issue 1.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. i, doi. 10.1111/ijac.12371
Publication type:
Article
Back Cover, Volume 12, Issue 1.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. ii, doi. 10.1111/ijac.12372
Publication type:
Article
Optical and Microwave Dielectric Properties of Zn-Doped Mg Al2 O4 Transparent Ceramics Fabricated by Spark Plasma Sintering.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 116, doi. 10.1111/ijac.12130
By:
- Fu, Ping;
- Xu, Yong;
- Lu, Wenzhong;
- Lei, Wen;
- Wang, Xuehua;
- Ruan, Xuefeng
Publication type:
Article
Effect of Temperature on Structural and Optical Properties of Boehmite Nanostructure.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 124, doi. 10.1111/ijac.12133
By:
- Rani, Geeta;
- Sahare, Purushottam Dinanath
Publication type:
Article
Novel Utilization of Fly Ash for High-Temperature Mortars: Phase Composition, Microstructure and Performances Correlation.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 133, doi. 10.1111/ijac.12135
By:
- Terzić, Anja;
- Pavlović, Ljubica;
- Radojević, Zagorka;
- Pavlović, Vladimir;
- Mitić, Vojislav
Publication type:
Article
Investigation on CuCa3Ti4O12 Modified BiFeO3-Based Perovskite Ceramics.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 157, doi. 10.1111/ijac.12138
By:
- Wang, Ben;
- Gong, Lixiu;
- Wang, Shumei;
- Zhou, Zhufa;
- Ma, Guilin
Publication type:
Article
Doping Effects on the Crystal Structure and Electrochemical Performance of LiFePO4/C.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 163, doi. 10.1111/ijac.12139
By:
- Yang, Yang;
- Li, Kezhi;
- Li, Hejun
Publication type:
Article
Three-Dimensional Stereolithography of Alumina Photonic Crystals for Terahertz Wave Localization.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 32, doi. 10.1111/ijac.12320
By:
- Kirihara, Soshu;
- Niki, Toshiki
Publication type:
Article
Near-Net-Shape Fabrication of Ti3 Si C2-based Ceramics by Three-Dimensional Printing.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 71, doi. 10.1111/ijac.12321
By:
- Ma, Yuzhao;
- Yin, Xiaowei;
- Fan, Xiaomeng;
- Wang, Lei;
- Greil, Peter;
- Travitzky, Nahum
Publication type:
Article
Stereolithographic Ceramic Manufacturing of High Strength Bioactive Glass.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 38, doi. 10.1111/ijac.12325
By:
- Gmeiner, Robert;
- Mitteramskogler, Gerald;
- Stampfl, Jürgen;
- Boccaccini, Aldo R.
Publication type:
Article
Process Parameters Development of Selective Laser Melting of Lunar Regolith for On-Site Manufacturing Applications.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 46, doi. 10.1111/ijac.12326
By:
- Fateri, Miranda;
- Gebhardt, Andreas
Publication type:
Article
Influence of ZrO2 Content on the Performances of BN-ZrO2-SiC Composites for Application in the Steel Industry.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 184, doi. 10.1111/ijac.12203
By:
- Chen, Lei;
- Wang, Yujin;
- Rao, Jiancun;
- Zhou, Yu
Publication type:
Article
Development and Characterization of Continuous SiC Fiber-Reinforced HfB2-Based UHTC Matrix Composites Using Polymer Impregnation and Slurry Infiltration Techniques.
Published in:
International Journal of Applied Ceramic Technology, 2015, v. 12, n. 1, p. 235, doi. 10.1111/ijac.12279
By:
- Leslie, Clifford J.;
- Boakye, Emmanuel E.;
- Keller, Kristin A.;
- Cinibulk, Michael K.
Publication type:
Article

Works matching IS 1546542X AND DT 2015 AND VI 12 AND IP 1

Sodium Excess Ta-Modified (K<sub>0.5</sub>Na<sub>0.5</sub>)NbO<sub>3</sub> Ceramics Prepared by Reactive Template Grain Growth Method.

The Influence of Platelet-Like LaMgAl<sub>11</sub>O<sub>19</sub> on the Toughness of 3 mol% Yttria Partially Stabilized Zirconia Ceramic.

The Effects of Calcium-to-Phosphorus Ratio on the Densification and Mechanical Properties of Hydroxyapatite Ceramic.

Investigation of Glaze Layer Formation on Green Ceramic Bodies.

Electrochemical Deposition of 58SiO<sub>2</sub>-33CaO-9P<sub>2</sub>O<sub>5</sub> Nanobioactive Glass Particles on Ti-6Al-4V Alloy for Biomedical Applications.

Flexible 0-3 Ceramic-Polymer Composites of Barium Titanate and Epoxidized Natural Rubber.

Effect of Gray Scale Binder Levels on Additive Manufacturing of Porous Scaffolds with Heterogeneous Properties.

Additive Manufacturing of Dense Alumina Ceramics.

Humidity Sensing Property of NaCl-Added Mesoporous Silica Synthesized by a Facile Way with Low Energy Cost.

Comparative In Vitro Osteoinductivity Study of HA and α- TCP/ HA Bicalcium Phosphate.

In Situ Foaming of Porous ( La<sub>0.6</sub> Sr<sub>0.4</sub>)<sub>0.98</sub> ( Co<sub>0.2</sub> Fe<sub>0.8</sub>) O<sub>3−δ</sub> ( LSCF) Cathodes for Solid Oxide Fuel Cell Applications.

Use of Electrophoretic Impregnation and Vacuum Bagging to Impregnate SiC Powder into SiC Fiber Preforms.

Medium Density Fiberboard Machining and Wear Behavior of Injection-Molded Ceramic Composite Wood Cutting Tools.

Selective Laser Melting of Soda-Lime Glass Powder.

Slurry-Based Additive Manufacturing of Ceramics.

Thermoplastic 3D Printing-An Additive Manufacturing Method for Producing Dense Ceramics.

Additive Manufacturing of Graphene-Hydroxyapatite Nanocomposite Structures.

Cover Image, Volume 12, Issue 1.

Back Cover, Volume 12, Issue 1.

Optical and Microwave Dielectric Properties of Zn-Doped Mg Al<sub>2</sub> O<sub>4</sub> Transparent Ceramics Fabricated by Spark Plasma Sintering.

Effect of Temperature on Structural and Optical Properties of Boehmite Nanostructure.

Novel Utilization of Fly Ash for High-Temperature Mortars: Phase Composition, Microstructure and Performances Correlation.

Investigation on CuCa<sub>3</sub>Ti<sub>4</sub>O<sub>12</sub> Modified BiFeO<sub>3</sub>-Based Perovskite Ceramics.

Doping Effects on the Crystal Structure and Electrochemical Performance of LiFePO<sub>4</sub>/C.

Three-Dimensional Stereolithography of Alumina Photonic Crystals for Terahertz Wave Localization.

Near-Net-Shape Fabrication of Ti<sub>3</sub> Si C<sub>2</sub>-based Ceramics by Three-Dimensional Printing.

Stereolithographic Ceramic Manufacturing of High Strength Bioactive Glass.

Process Parameters Development of Selective Laser Melting of Lunar Regolith for On-Site Manufacturing Applications.

Influence of ZrO<sub>2</sub> Content on the Performances of BN-ZrO<sub>2</sub>-SiC Composites for Application in the Steel Industry.

Development and Characterization of Continuous SiC Fiber-Reinforced HfB<sub>2</sub>-Based UHTC Matrix Composites Using Polymer Impregnation and Slurry Infiltration Techniques.