Works matching IS 14381656 AND DT 2025 AND VI 27 AND IP 2

Results: 34

Monodomain Liquid‐Crystal Elastomer Lattices for Broad Strain‐Rate Mechanical Damping.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401796
By:
- Bischoff, Adam;
- Bawcutt, Carter;
- Sorkin, Maksim;
- Yazzie, Joel;
- C. Cook, Caitlyn;
- Leguizamon, Samuel C.;
- Cook, Adam W.;
- Roach, Devin J.
Publication type:
Article
Issue Information.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202570007
Publication type:
Article
Breaking the Cardiovascular Flow Barrier for Dielectric Elastomer Actuator‐Based Pumping: Design and Characterization.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401306
By:
- Benouhiba, Amine;
- Walter, Armando;
- Jahren, Silje Ekroll;
- Clavica, Francesco;
- Obrist, Dominik;
- Civet, Yoan;
- Perriard, Yves
Publication type:
Article
Influence of Discontinuous Precipitation on Microhardness and Wear Resistance in (FeCoNi)86Al7Ti7 High‐Entropy Alloy.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202402102
By:
- An, Xulong;
- Li, Hao;
- Yang, Xinyi;
- Jiang, Jiahao;
- Liu, Zhengdi;
- Kan, Lequn;
- Zhang, Lantian;
- Gan, Bin;
- Wei, Wei;
- Chu, Chenglin;
- Sun, Wenwen
Publication type:
Article
An Experimental and Computational Framework to Investigate the Microstructural Effects on the Mechanical Properties of Pearlitic Steels.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202402441
By:
- Bollineni, Ravi Kiran;
- Mirzaeifar, Reza;
- Ahmadian, Mehdi;
- Li, Ling
Publication type:
Article
Enhancement of the Mechanical Properties and Biological Performance of Hydroxyapatite Coating by Selenium and Fluorine Ion Codoping.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202402229
By:
- Zhang, Chennan;
- Bai, Yu;
- Li, Ting;
- Gao, Yuanming;
- Ma, Wen
Publication type:
Article
One‐Step Hydrothermal Process to Fabricate Hydrophobic Mg–Al Layered Double Hydroxide Coating on MAO–Coated AZ31 Magnesium Alloy and Its Durability.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202402135
By:
- Zhang, Jumei;
- Wang, Zhihu
Publication type:
Article
Precision Macroporous Monoliths Made Using High‐Throughput Microfluidic Emulsification.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401363
By:
- Mattich, Iacopo;
- Ofner, Alessandro;
- Studart, André R.
Publication type:
Article
Significant Enhancement of Strength–Ductility Synergy of a Cost‐Effective Eutectic High‐Entropy Alloy via Strain‐Partition Engineering.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202402061
By:
- Tripathy, Bikash;
- Ojha, Pankaj Kumar;
- Paul, Suvra;
- Bhattacharjee, Pinaki Prasad
Publication type:
Article
Constitutive and Fracture Behavior of Double‐Network Elastomers.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202402044
By:
- Fayed, Marwan;
- Wei, Chen;
- Jin, Lihua
Publication type:
Article
3D‐Printed Pyramidal Honeycomb Structures Plated with Silver and Infused with Fe3O4–Epoxy Composite for Microwave Absorption Applications.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202402030
By:
- Rehman, Ubaid ur;
- Bilal, Ahmed;
- Faizan, Junaid;
- Warsi, Asif;
- Ramzan, Amna;
- Shati, Khaqan;
- Nadeem, Muhammad
Publication type:
Article
Enhanced Oxidation Resistance of Pt‐Containing Inconel 718 Alloy through Facilitated Formation of Protective Chromia.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202402008
By:
- Zheng, Jianshu;
- Zhang, Boning;
- Wang, Guowei;
- Liu, Lan;
- Shen, Chao;
- Song, Zhuorui;
- Zheng, Lei
Publication type:
Article
Preparation of Ti6Al4V Slurry for Digital Light Processing 3D Printing.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202402004
By:
- Zhang, Jinshuai;
- Guo, Nana;
- Li, Ling;
- Zhao, Junhui;
- Chu, Wei;
- Zhao, Jie
Publication type:
Article
The Influence of Filler Shape on the Microwave Absorptions of Polyethylene Composites with High Ferroalloy Powder Content.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401937
By:
- Li, Mingzhan;
- Li, Yang;
- Cheng, Haoran;
- Chen, Qiang;
- Liu, Chuntai;
- Shen, Changyu;
- Liu, Xianhu
Publication type:
Article
Mechanical Behavior of Metastable β Ti–10V–2Fe–3Al Alloy with and without Presence of α Phase.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401931
By:
- Pereloma, Elena;
- Nancarrow, Mitchel J. B.;
- Bian, Xiaohui;
- Naseri, Ryan;
- Zhu, Qiang;
- Smillie, Lachlan;
- Saleh, Ahmed A.
Publication type:
Article
Shielding Performance of a New Coating Material Composed of Polyurea Resin and Tungsten Carbide against X‐Rays.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401816
By:
- Aghabaklooei, Soheil;
- Funamizu, Hirofumi;
- Fuchita, Yasuhiro;
- Yasuda, Hiroshi
Publication type:
Article
Mechanical Response of Four‐Star‐Honeycomb Hybrid Metamaterial Under In‐Plane Loading.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401886
By:
- Mwema, Fredrick Madaraka;
- Wambua, Job M.;
- Igwe, Arize C.;
- Akinlabi, Stephen A.;
- Jen, Tien‐Chien;
- Akinlabi, Esther
Publication type:
Article
Engineering the Atomic Interface of Refractory‐Metal‐Reinforced Copper Matrix Using Direct Ink 3D Printing.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401747
By:
- Das, Rakesh;
- de Oliveira, Raphael Benjamim;
- Kumar, Banty;
- Mishra, Vidhyadhar;
- Sarkar, Suman;
- Felix, Isaac de Macêdo;
- Machado, Leonardo Dantas;
- Tiwary, Chandra Sekhar
Publication type:
Article
Synergism of Arc Spraying, Laser Processing, and Hydrophobization for Long‐Lasting Corrosion Protection of MA8 Magnesium Alloy.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401708
By:
- Boinovich, Ludmila B.;
- Domantovsky, Alexandr G.;
- Emelyanenko, Alexandre M.;
- Emelyanenko, Kirill A.
Publication type:
Article
Impact of PbZr0.5Ti0.5O3 Particle Size on the Ferroelectric and Magnetoelectric Properties of Mn0.5Zn0.5Fe2O4–PbZr0.5Ti0.5O3 Multiferroic Fluids
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401697
By:
- Ao, Hong;
- Mu, Haowen;
- Chen, Chen;
- Li, Huan;
- Gao, Rongli;
- Deng, Xiaoling;
- Cai, Wei;
- Fu, Chunlin
Publication type:
Article
Thickness‐Related Analog Switching in SiOx/Cu/SiOx Memristive Devices for Neuromorphic Applications.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401824
By:
- Lamprecht, Rouven;
- Vialetto, Luca;
- Gergs, Tobias;
- Zahari, Finn;
- Marquardt, Richard;
- Kohlstedt, Hermann;
- Trieschmann, Jan
Publication type:
Article
Monodomain Liquid‐Crystal Elastomer Lattices for Broad Strain‐Rate Mechanical Damping.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401796
By:
- Bischoff, Adam;
- Bawcutt, Carter;
- Sorkin, Maksim;
- Yazzie, Joel;
- C. Cook, Caitlyn;
- Leguizamon, Samuel C.;
- Cook, Adam W.;
- Roach, Devin J.
Publication type:
Article
Surface Functionalized Zinc Composite Coatings: A Review.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401597
By:
- Awasthi, Shikha;
- Palomero, Blanca Prior;
- Srivastava, Ankur;
- Selvaraj, Sankar;
- Kumar, Deepak;
- Pandey, Sarvesh Kumar
Publication type:
Article
Transient Thermal Mapping Utilizing the Sintering of Glass‐Ceramics.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401585
By:
- Burke, Noah A.;
- Gregory, Otto J.
Publication type:
Article
Effects of Laser Oscillation Frequency on the Microstructure and Properties of TiC/Fe‐Based Alloy Composite Coatings.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401774
By:
- Zhong, Yilan;
- Hu, Yongle;
- Zhang, Mingjun;
- Wang, Kaiming;
- Mao, Cong;
- Tang, Weidong;
- Pang, Xiaotong;
- Tong, Yonggang;
- Zhang, Yun
Publication type:
Article
Recent Progress in Particulate Reinforced Copper‐Based Composites: Fabrication, Microstructure, Mechanical, and Tribological Properties—A Review.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401748
By:
- Shekhar, Chandra;
- Wani, Mohmmad Farooq;
- Sehgal, Rakesh;
- Saleem, Sheikh Shahid;
- Ziyamukhamedova, Umida;
- Tursunov, Nodirjon
Publication type:
Article
High‐Temperature Hardness Anomaly in Ti–Ni–Fe‐Based Multiphase Intermetallic.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401562
By:
- Panda, Subha S.;
- Sahni, Sandeep;
- Mangam, Subhakar;
- Jayabalan, Bhagyaraj;
- Mukherjee, Subrata;
- Jain, Jayant;
- Singh, Sudhanshu S.
Publication type:
Article
Monolith Catalyst Design by Combining 3D Printing and Atomic Layer Deposition: Toward Green Palladium‐Catalyzed Cross‐Coupling Reactions.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401546
By:
- Dory, Hippolyte;
- Petit, Eddy;
- El‐Sayegh, Syreina;
- Badouric, Lucie;
- Castro, Victoria;
- Bechelany, Mikhael;
- Voiry, Damien;
- Miele, Philippe;
- Lajaunie, Luc;
- Salameh, Chrystelle
Publication type:
Article
Precision Macroporous Monoliths Made Using High‐Throughput Microfluidic Emulsification.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401363
By:
- Mattich, Iacopo;
- Ofner, Alessandro;
- Studart, André R.
Publication type:
Article
Near‐Infrared Reflectance, Thermal Shielding, and Corrosion Resistance of Neodymium‐Modified Zinc Aluminate Spinel‐Based Zinc Phosphate Coatings.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401351
By:
- Aswathy, Subodhana Praballian;
- Kumar, Asha S.;
- Saji, Viswanathan S.;
- Shibli, Sheik Muhammadhu Aboobakar
Publication type:
Article
Breaking the Cardiovascular Flow Barrier for Dielectric Elastomer Actuator‐Based Pumping: Design and Characterization.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401306
By:
- Benouhiba, Amine;
- Walter, Armando;
- Jahren, Silje Ekroll;
- Clavica, Francesco;
- Obrist, Dominik;
- Civet, Yoan;
- Perriard, Yves
Publication type:
Article
Uncertainty Quantification of Microstructures: A Perspective on Forward and Inverse Problems for Mechanical Properties of Aerospace Materials.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401299
By:
- Billah, Md Maruf;
- Elleithy, Mohamed;
- Khan, Waris;
- Yıldız, Saltuk;
- Eğer, Zekeriya Ender;
- Liu, Sheng;
- Long, Matthew;
- Acar, Pınar
Publication type:
Article
Investigation of the Effect of Reprocessing on Thermal and Mechanical Properties of Polymers and Polymer Nanocomposites.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401260
By:
- Dananjaya, S. A. Vimukthi;
- Fortichiari, Claudio;
- Perera, Yasith S.;
- Dasanayaka, Chamila H.;
- Abeykoon, Chamil
Publication type:
Article
Effect of Four Process Parameters on Flexural Strength and Porosity of Metakaolin Ceramics Fabricated by Material Extrusion: Optimization and Predictive Models via Orthogonal Experiments.
Published in:
Advanced Engineering Materials, 2025, v. 27, n. 2, p. 1, doi. 10.1002/adem.202401197
By:
- Wu, Ming;
- Liu, Fuchu;
- Lin, Yuxiao;
- Wang, Miao;
- Wang, Yi;
- Zhou, Shilin;
- Liu, Hao;
- Han, Guangchao
Publication type:
Article

Works matching IS 14381656 AND DT 2025 AND VI 27 AND IP 2

Monodomain Liquid‐Crystal Elastomer Lattices for Broad Strain‐Rate Mechanical Damping.

Issue Information.

Breaking the Cardiovascular Flow Barrier for Dielectric Elastomer Actuator‐Based Pumping: Design and Characterization.

Influence of Discontinuous Precipitation on Microhardness and Wear Resistance in (FeCoNi)<sub>86</sub>Al<sub>7</sub>Ti<sub>7</sub> High‐Entropy Alloy.

An Experimental and Computational Framework to Investigate the Microstructural Effects on the Mechanical Properties of Pearlitic Steels.

Enhancement of the Mechanical Properties and Biological Performance of Hydroxyapatite Coating by Selenium and Fluorine Ion Codoping.

One‐Step Hydrothermal Process to Fabricate Hydrophobic Mg–Al Layered Double Hydroxide Coating on MAO–Coated AZ31 Magnesium Alloy and Its Durability.

Precision Macroporous Monoliths Made Using High‐Throughput Microfluidic Emulsification.

Significant Enhancement of Strength–Ductility Synergy of a Cost‐Effective Eutectic High‐Entropy Alloy via Strain‐Partition Engineering.

Constitutive and Fracture Behavior of Double‐Network Elastomers.

3D‐Printed Pyramidal Honeycomb Structures Plated with Silver and Infused with Fe<sub>3</sub>O<sub>4</sub>–Epoxy Composite for Microwave Absorption Applications.

Enhanced Oxidation Resistance of Pt‐Containing Inconel 718 Alloy through Facilitated Formation of Protective Chromia.

Preparation of Ti6Al4V Slurry for Digital Light Processing 3D Printing.

The Influence of Filler Shape on the Microwave Absorptions of Polyethylene Composites with High Ferroalloy Powder Content.

Mechanical Behavior of Metastable β Ti–10V–2Fe–3Al Alloy with and without Presence of α Phase.

Shielding Performance of a New Coating Material Composed of Polyurea Resin and Tungsten Carbide against X‐Rays.

Mechanical Response of Four‐Star‐Honeycomb Hybrid Metamaterial Under In‐Plane Loading.

Engineering the Atomic Interface of Refractory‐Metal‐Reinforced Copper Matrix Using Direct Ink 3D Printing.

Synergism of Arc Spraying, Laser Processing, and Hydrophobization for Long‐Lasting Corrosion Protection of MA8 Magnesium Alloy.

Impact of PbZr<sub>0.5</sub>Ti<sub>0.5</sub>O<sub>3</sub> Particle Size on the Ferroelectric and Magnetoelectric Properties of Mn<sub>0.5</sub>Zn<sub>0.5</sub>Fe<sub>2</sub>O<sub>4</sub>–PbZr<sub>0.5</sub>Ti<sub>0.5</sub>O<sub>3</sub> Multiferroic Fluids

Thickness‐Related Analog Switching in SiO<sub>x</sub>/Cu/SiO<sub>x</sub> Memristive Devices for Neuromorphic Applications.

Monodomain Liquid‐Crystal Elastomer Lattices for Broad Strain‐Rate Mechanical Damping.

Surface Functionalized Zinc Composite Coatings: A Review.

Transient Thermal Mapping Utilizing the Sintering of Glass‐Ceramics.

Effects of Laser Oscillation Frequency on the Microstructure and Properties of TiC/Fe‐Based Alloy Composite Coatings.

Recent Progress in Particulate Reinforced Copper‐Based Composites: Fabrication, Microstructure, Mechanical, and Tribological Properties—A Review.

High‐Temperature Hardness Anomaly in Ti–Ni–Fe‐Based Multiphase Intermetallic.

Monolith Catalyst Design by Combining 3D Printing and Atomic Layer Deposition: Toward Green Palladium‐Catalyzed Cross‐Coupling Reactions.

Precision Macroporous Monoliths Made Using High‐Throughput Microfluidic Emulsification.

Near‐Infrared Reflectance, Thermal Shielding, and Corrosion Resistance of Neodymium‐Modified Zinc Aluminate Spinel‐Based Zinc Phosphate Coatings.

Breaking the Cardiovascular Flow Barrier for Dielectric Elastomer Actuator‐Based Pumping: Design and Characterization.

Uncertainty Quantification of Microstructures: A Perspective on Forward and Inverse Problems for Mechanical Properties of Aerospace Materials.

Investigation of the Effect of Reprocessing on Thermal and Mechanical Properties of Polymers and Polymer Nanocomposites.

Effect of Four Process Parameters on Flexural Strength and Porosity of Metakaolin Ceramics Fabricated by Material Extrusion: Optimization and Predictive Models via Orthogonal Experiments.