Works matching IS 14381656 AND DT 2025 AND VI 27 AND IP 14

Results: 35

Laser Additive Manufacturing of Oxide‐Dispersion‐Strengthened Steels: A Simulation‐Based Comparison Between Powder Bed Fusion and Direct Energy Deposition.

Published in:

2025

By:

Bharech, Somnath;
Yang, Yangyiwei;
Oyedeji, Timileyin David;
Bondi, Prasanth;
Goßling, Mareen;
Gökce, Bilal;
Xu, Bai‐Xiang

Publication type:

Abstract

Impact of Iron Contamination on Liquid Properties and Microstructural Evolution in AlSi20.

Published in:

2025

By:

Tisha, Layla Shams;
Toenjes, Anastasiya;
Ellendt, Nils

Publication type:

Abstract

Issue Information.

Published in:: Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202570048
Publication type:: Article

Influence of Cooling Rate on Primary Silicon Size in Hypereutectic Al–Si Alloy Fabricated by Laser Powder Bed Fusion.

Published in:

2025

By:

Tisha, Layla Shams;
Knoop, Daniel;
Ellendt, Nils;
Toenjes, Anastasiya

Publication type:

Abstract

What If Materials Could Think Ahead?

Published in:

2025

By:

Ziefuss, Anna Rosa;
Barcikowski, Stephan;
Luinstra, Gerrit Albert

Publication type:

Editorial

What If Materials Could Think Ahead?

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202501628

By:

Ziefuss, Anna Rosa;
Barcikowski, Stephan;
Luinstra, Gerrit Albert

Publication type:

Article

Direct Natural and Artificial Aging of Aluminum Alloy AlSi10Mg After Laser Powder‐Bed Fusion.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202501181

By:

Steuer, Rabea;
Milkereit, Benjamin;
Wenner, Sigurd;
Broer, Jette;
Huber, Florian;
Schaper, Mirko;
Kessler, Olaf

Publication type:

Article

Mechanical Properties of Different Austenitic High‐Nitrogen Steel Grades Produced by Powder Mixtures.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202500885

By:

Radtke, Felix;
Becker, Louis;
Schultze‐Schlutius, Lars;
Kaletsch, Anke;
Lentz, Jonathan;
Weber, Sebastian;
Broeckmann, Christoph

Publication type:

Article

Comparative Study of Experimental Methods for Measuring Thermal Properties of 100Cr6 Steel Powders.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202500702

By:

Zhuo, Junsheng;
Kohl, Hagen P.;
Liu, Dongmei;
Matthäus, Lisa;
Bochmann, Arne;
Berger, Aaron;
Weber, Sebastian;
Nolte, Stefan;
Lippmann, Stephanie

Publication type:

Article

Evaluating Dielectric Properties for Semicrystalline Thermoplastics to Analyze the Thermal and Rheological Properties in Laser‐Based Powder Bed Fusion of Plastics.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202500541

By:

Burchard, Benedikt;
Hofmann, Joseph;
Wudy, Katrin

Publication type:

Article

Mesoporous Silica Microspheres by Super‐Fast Alkaline Etching of Micrometer‐Sized Stöber Particles.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202500536

By:

Vaghar, Adrian;
Jegorenkov, Georgij;
Luinstra, Gerrit A.

Publication type:

Article

Performance Comparison of Surface Sensitizers for Diode Laser Powder Bed Fusion of Polyamide 12.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202500466

By:

Willeke, Michael;
Sommereyns, Alexander;
Leupold, Simon;
Lüddecke, Arne;
Kwade, Arno;
Hantke, Nick;
Sehrt, Jan T.;
Schmidt, Michael;
Ziefuss, Anna R.;
Barcikowski, Stephan

Publication type:

Article

Preparation and Thermal Modification of Disentangled Ultrahigh‐Molecular‐Weight Polyethylene Particles for Powder‐Based Additive Manufacturing.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202500426

By:

Vaghar, Adrian;
Jegorenkov, Georgij;
Kutlu, Yunus;
Ostendorf, Andreas;
Luinstra, Gerrit A.

Publication type:

Article

Mechanical and Microstructural Effects of ZrO2 Nanoparticles in Fe20Cr Oxide Dispersion‐Strengthened Alloys Processed by Laser Powder Bed Fusion.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202500317

By:

Goßling, Mareen;
Rittinghaus, Silja‐Katharina;
Radtke, Felix;
Elsayed, Abdelrahman;
Barrientos, Marina Macias;
Ziesing, Ulf;
Becker, Louis;
Kuşoğlu, Ihsan Murat;
Broeckmann, Christoph;
Krupp, Ulrich;
Hariharan, Avinash;
Weber, Sebastian;
Gökce, Bilal

Publication type:

Article

Additive Manufacturing of Highly Alloyed Aluminum–Lithium.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202500262

By:

Matthäus, Lisa;
Kohl, Hagen Peter;
Liu, Dongmei;
Lippmann, Stephanie;
Nolte, Stefan

Publication type:

Article

Laser Additive Manufacturing of Oxide‐Dispersion‐Strengthened Steels: A Simulation‐Based Comparison Between Powder Bed Fusion and Direct Energy Deposition.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202402946

By:

Bharech, Somnath;
Yang, Yangyiwei;
Oyedeji, Timileyin David;
Bondi, Prasanth;
Goßling, Mareen;
Gökce, Bilal;
Xu, Bai‐Xiang

Publication type:

Article

Large‐Scale Interlaboratory Study Along the Entire Process Chain of Laser Powder Bed Fusion: Bridging Variability, Standards, and Optimization across Metals and Polymers.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202402930

By:

Kuşoğlu, Ihsan Murat;
Garg, Sunidhi;
Abel, Arvid;
Balachandran, Prasanna V.;
Barcikowski, Stephan;
Becker, Louis;
Bernsmann, Jan-Simeon;
Boseila, Jonas;
Broeckmann, Christoph;
Coskun, Mert;
Dreyer, Malte;
East, Mark;
Easton, Mark;
Ellendt, Nils;
Gann, Stan;
Gökce, Bilal;
Goßling, Mareen;
Greiner, Joachim;
Gruber, Piotr;
Grünewald, Moritz

Publication type:

Article

Geometry‐Based Scan Curve Analysis: Rapid Method for the Evaluation of Scan Strategies in Powder Bed Fusion.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202402929

By:

Leupold, Simon;
Willeke, Michael;
Sommereyns, Alexander;
Gehring, Matthias;
Dineshbhai, Parmar Yankit;
Stratmann, Nadine;
Ziefuss, Anna Rosa;
Kopp, Sebastian‐Paul;
Barcikowski, Stephan;
Schmidt, Michael

Publication type:

Article

Influence of a Hydrogen Addition to the Inert Gas and Subsequent Heat Treatments on the Microstructure and Mechanical Properties of Magnesium WE43 Fabricated by PBF‐LB/M.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202402704

By:

Abel, Arvid;
Breitbach, Elmar Jonas;
Holländer, Hannes;
Müller, Michael;
Griemsmann, Tjorben;
Klose, Christian;
Hermsdorf, Jörg;
Maier, Hans Jürgen;
Kaierle, Stefan;
Overmeyer, Ludger

Publication type:

Article

Nanoparticle‐Coated X2CrNiMo17‐12‐2 Powder for Additive Manufacturing – Part I: Surface, Flowability, and Optical Properties of SiC, Si, and Si3N4 Coated Metal Powders.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202402297

By:

Lüddecke, Arne;
Hantke, Nick;
Zetzener, Harald;
Sehrt, Jan T.;
Kwade, Arno

Publication type:

Article

Nanoparticle‐Coated X2CrNiMo17‐12‐2 Powder for Additive Manufacturing—Part II: Processability by Powder Bed Fusion of Metals Using a Laser Beam.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202402296

By:

Hantke, Nick;
Brocksieper, Tim R.;
Lüddecke, Arne;
Grimm, Tobias;
Kwade, Arno;
Sehrt, Jan T.

Publication type:

Article

Powder Metallurgy and Additive Manufacturing of High‐Nitrogen Alloyed FeCr(Si)N Stainless Steel.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202402293

By:

Becker, Louis;
Radtke, Felix;
Lentz, Jonathan;
Benito, Santiago;
Broeckmann, Christoph;
Weber, Sebastian

Publication type:

Article

A Novel Approach on Rapid Alloy Development of Tool Steels for Laser Powder Bed Fusion by In Situ Alloying.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202402253

By:

Großwendt, Felix;
Strauch, Anna;
Lentz, Jonathan;
Röttger, Arne;
Fechte‐Heinen, Rainer;
Weber, Sebastian;
Theisen, Werner

Publication type:

Article

Dimensionless Investigations on Energy Conversion and Analysis of Interlayer Time in Laser‐Based Powder Bed Fusion of Polymers for Polyamide 12 with Nanoadditives and Polypropylene.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202402206

By:

Schlör, Christian;
Grünewald, Moritz;
Popp, Kevin;
Kusoglu, Ihsan Murat;
Barcikowski, Stephan;
Gann, Stan;
Schuffenhauer, Thomas;
Bastian, Martin;
Bierwisch, Claas;
Rudloff, Johannes

Publication type:

Article

A Perspective on Powder Metallurgy and Additive Manufacturing of High‐Nitrogen Alloyed Stainless Steels.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202402033

By:

Becker, Louis;
Radtke, Felix;
Lentz, Jonathan;
Herzog, Simone;
Broeckmann, Christoph;
Weber, Sebastian

Publication type:

Article

Trans‐Conductive Melt Pool Scaling and its Implications for Parameter Transfer in Laser Powder Bed Fusion for Metals with High Thermal Diffusivity.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202401958

By:

Döring, Markus;
Gehring, Matthias;
Schmidt, Michael

Publication type:

Article

Development of a Novel Processing Route for Dispersoid/Precipitation‐Strengthened High Conductive Copper Alloys by Using Metalized Nanoceramics in Additive Manufacturing.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202401957

By:

von Lintel, Heinrich;
Elsayed, Abdelrahman;
Mielewczyk, Lukas;
Eichmann, Katja;
Grothe, Julia;
Krupp, Ulrich;
Hariharan, Avinash;
Jahns, Katrin

Publication type:

Article

Stabilization of the Ternary Eutectic Growth in Additively Manufactured AlNiCe Alloys.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202401665

By:

Boussinot, Guillaume;
Cazic, Ivan;
Döring, Markus;
Schmidt, Michael;
Apel, Markus

Publication type:

Article

Influence of Cooling Rate on Primary Silicon Size in Hypereutectic Al–Si Alloy Fabricated by Laser Powder Bed Fusion.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202401542

By:

Tisha, Layla Shams;
Knoop, Daniel;
Ellendt, Nils;
Toenjes, Anastasiya

Publication type:

Article

Impact of Iron Contamination on Liquid Properties and Microstructural Evolution in AlSi20.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202401541

By:

Tisha, Layla Shams;
Toenjes, Anastasiya;
Ellendt, Nils

Publication type:

Article

Maillard Type Reaction for Electroless Copper Plating onto Ceramic Nanoparticles.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202401523

By:

Mielewczyk, Lukas;
Grothe, Julia;
Kaskel, Stefan;
von Lintel, Heinrich;
Eichmann, Katja;
Jahns, Katrin;
Hariharan, Avinash;
Elsayed, Abdelrahman;
Krupp, Ulrich

Publication type:

Article

A Novel Approach to Produce Metal–Metal Composites by Leveraging Immiscibility: Laser Powder Bed Fusion of Nanosilver‐Dispersed Titanium.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202401512

By:

Shokri, Hamed;
Rittinghaus, Silja‐Katharina;
Schmelzer, Janett;
Bertrand, Jessica;
Gökce, Bilal

Publication type:

Article

Development of Ternary Magnesium Alloys for Laser Powder Bed Fusion: Optimizing Oxide Layer Thickness.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202401322

By:

Breitbach, Elmar Jonas;
Julmi, Stefan;
Behrens, Sabine;
Blank, Tatiana;
Abel, Arvid;
Emminghaus, Nicole;
Overmeyer, Ludger;
Klose, Christian;
Maier, Hans Jürgen

Publication type:

Article

Development and Validation of a One‐Dimensional Finite Difference Simulation Scheme for Polymer Laser Powder Bed Fusion with Application to the Effect of the Inter Layer Time.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202401285

By:

Bierwisch, Claas;
Dietemann, Bastien;
Grünewald, Moritz;
Schlör, Christian;
Rudloff, Johannes

Publication type:

Article

Numerical Studies of Influencing Factors on the Homogeneity of the Powder Mixture during the Powder Spreading Process of Powder Bed Fusion–Laser Beam/Metal.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 14, p. 1, doi. 10.1002/adem.202400305

By:

Deng, Yuanbin;
Sang, Ziping;
Zhang, Jiali;
Radtke, Felix;
Becker, Louis;
Herzog, Simone;
Weber, Sebastian;
Broeckmann, Christoph

Publication type:

Article

Works matching IS 14381656 AND DT 2025 AND VI 27 AND IP 14

Laser Additive Manufacturing of Oxide‐Dispersion‐Strengthened Steels: A Simulation‐Based Comparison Between Powder Bed Fusion and Direct Energy Deposition.

Impact of Iron Contamination on Liquid Properties and Microstructural Evolution in AlSi20.

Issue Information.

Influence of Cooling Rate on Primary Silicon Size in Hypereutectic Al–Si Alloy Fabricated by Laser Powder Bed Fusion.

What If Materials Could Think Ahead?

What If Materials Could Think Ahead?

Direct Natural and Artificial Aging of Aluminum Alloy AlSi10Mg After Laser Powder‐Bed Fusion.

Mechanical Properties of Different Austenitic High‐Nitrogen Steel Grades Produced by Powder Mixtures.

Comparative Study of Experimental Methods for Measuring Thermal Properties of 100Cr6 Steel Powders.

Evaluating Dielectric Properties for Semicrystalline Thermoplastics to Analyze the Thermal and Rheological Properties in Laser‐Based Powder Bed Fusion of Plastics.

Mesoporous Silica Microspheres by Super‐Fast Alkaline Etching of Micrometer‐Sized Stöber Particles.

Performance Comparison of Surface Sensitizers for Diode Laser Powder Bed Fusion of Polyamide 12.

Preparation and Thermal Modification of Disentangled Ultrahigh‐Molecular‐Weight Polyethylene Particles for Powder‐Based Additive Manufacturing.

Mechanical and Microstructural Effects of ZrO<sub>2</sub> Nanoparticles in Fe20Cr Oxide Dispersion‐Strengthened Alloys Processed by Laser Powder Bed Fusion.

Additive Manufacturing of Highly Alloyed Aluminum–Lithium.

Laser Additive Manufacturing of Oxide‐Dispersion‐Strengthened Steels: A Simulation‐Based Comparison Between Powder Bed Fusion and Direct Energy Deposition.

Large‐Scale Interlaboratory Study Along the Entire Process Chain of Laser Powder Bed Fusion: Bridging Variability, Standards, and Optimization across Metals and Polymers.

Geometry‐Based Scan Curve Analysis: Rapid Method for the Evaluation of Scan Strategies in Powder Bed Fusion.

Influence of a Hydrogen Addition to the Inert Gas and Subsequent Heat Treatments on the Microstructure and Mechanical Properties of Magnesium WE43 Fabricated by PBF‐LB/M.

Nanoparticle‐Coated X2CrNiMo17‐12‐2 Powder for Additive Manufacturing – Part I: Surface, Flowability, and Optical Properties of SiC, Si, and Si<sub>3</sub>N<sub>4</sub> Coated Metal Powders.

Nanoparticle‐Coated X2CrNiMo17‐12‐2 Powder for Additive Manufacturing—Part II: Processability by Powder Bed Fusion of Metals Using a Laser Beam.

Powder Metallurgy and Additive Manufacturing of High‐Nitrogen Alloyed FeCr(Si)N Stainless Steel.

A Novel Approach on Rapid Alloy Development of Tool Steels for Laser Powder Bed Fusion by In Situ Alloying.

Dimensionless Investigations on Energy Conversion and Analysis of Interlayer Time in Laser‐Based Powder Bed Fusion of Polymers for Polyamide 12 with Nanoadditives and Polypropylene.

A Perspective on Powder Metallurgy and Additive Manufacturing of High‐Nitrogen Alloyed Stainless Steels.

Trans‐Conductive Melt Pool Scaling and its Implications for Parameter Transfer in Laser Powder Bed Fusion for Metals with High Thermal Diffusivity.

Development of a Novel Processing Route for Dispersoid/Precipitation‐Strengthened High Conductive Copper Alloys by Using Metalized Nanoceramics in Additive Manufacturing.

Stabilization of the Ternary Eutectic Growth in Additively Manufactured AlNiCe Alloys.

Influence of Cooling Rate on Primary Silicon Size in Hypereutectic Al–Si Alloy Fabricated by Laser Powder Bed Fusion.

Impact of Iron Contamination on Liquid Properties and Microstructural Evolution in AlSi20.

Maillard Type Reaction for Electroless Copper Plating onto Ceramic Nanoparticles.

A Novel Approach to Produce Metal–Metal Composites by Leveraging Immiscibility: Laser Powder Bed Fusion of Nanosilver‐Dispersed Titanium.

Development of Ternary Magnesium Alloys for Laser Powder Bed Fusion: Optimizing Oxide Layer Thickness.

Development and Validation of a One‐Dimensional Finite Difference Simulation Scheme for Polymer Laser Powder Bed Fusion with Application to the Effect of the Inter Layer Time.

Numerical Studies of Influencing Factors on the Homogeneity of the Powder Mixture during the Powder Spreading Process of Powder Bed Fusion–Laser Beam/Metal.