Works matching IS 14381656 AND DT 2024 AND VI 26 AND IP 12

Results: 34

Dual One and Two‐Photon Solvent‐Free Hybrid Photoresist for High‐Resolution and Grayscale 3D Microprinting.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202301617
By:
- Chía Gómez, Laura Piedad;
- Pitrat, Delphine;
- Bretonnière, Yann;
- Borondics, Ferenc;
- Banyasz, Akos;
- Parola, Stephane;
- Santanach Carreras, Enric
Publication type:
Article
Dual One and Two‐Photon Solvent‐Free Hybrid Photoresist for High‐Resolution and Grayscale 3D Microprinting.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202301617
By:
- Chía Gómez, Laura Piedad;
- Pitrat, Delphine;
- Bretonnière, Yann;
- Borondics, Ferenc;
- Banyasz, Akos;
- Parola, Stephane;
- Santanach Carreras, Enric
Publication type:
Article
Masthead.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202470029
Publication type:
Article
Dual One and Two‐Photon Solvent‐Free Hybrid Photoresist for High‐Resolution and Grayscale 3D Microprinting.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202301617
By:
- Chía Gómez, Laura Piedad;
- Pitrat, Delphine;
- Bretonnière, Yann;
- Borondics, Ferenc;
- Banyasz, Akos;
- Parola, Stephane;
- Santanach Carreras, Enric
Publication type:
Article
Polyvinylidene Fluoride Nanocomposites as Piezoelectric Nanogenerator: Properties, Fabrication and Market Applications.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202400445
By:
- Mukherjee, Anindita;
- Dasgupta Ghosh, Barnali;
- Ghosh, Anupam;
- Roy, Sunanda
Publication type:
Article
Influence of Macroscale Dimension on the Electrocrystallization of Cu Pad and Redistributed Layer in Advanced Packaging.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202400304
By:
- Liu, Jin‐Hao;
- Wan, Yong‐Qiang;
- Gao, Li‐Yin;
- Cui, Xian‐Wei;
- Liu, Zhi‐Quan
Publication type:
Article
Influence of Programming and Recovery Parameters on Compressive Behaviors of 4D‐Printed Biocompatible Polyvinyl Chloride or Vinyl–Poly(ε‐Caprolactone) Blends.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202400301
By:
- Rahmatabadi, Davood;
- Aberoumand, Mohammad;
- Soltanmohammadi, Kianoosh;
- Soleyman, Elyas;
- Ghasemi, Ismaeil;
- Baniassadi, Majid;
- Abrinia, Karen;
- Bodaghi, Mahdi;
- Baghani, Mostafa
Publication type:
Article
Influence of Build Height on Quality of Additively Manufactured Thermoplastic Polyurethane Parts.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202400293
By:
- Gangwar, Sudhanshu;
- Saxena, Prateek;
- Biermann, Tobias;
- Steinnagel, Carl;
- Lachmayer, Roland
Publication type:
Article
Ti3C2Tx MXene‐Reinforced Natural Rubber Nanocomposites with Tailored Mechanical and Antiaging Properties.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202400286
By:
- Wijesinghe, Ishara;
- Wimalachandra, Sajani;
- Chathuranga, Hiran;
- Kondarage, Yashodha;
- Hettige Dharmasiri, Chathushka D.;
- Firestein, Konstantin L.;
- Tesfamichael, Tuquabo;
- Bai, Ruixiang;
- Lei, Zhenkun;
- Yan, Cheng
Publication type:
Article
Continuous Carbon Fiber Reinforced SiC Ceramic Matrix Composites by Vertical Fiber Laying Combined with Material Extrusion 3D Printing.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202400218
By:
- Li, Zengchan;
- Wang, Wenqing;
- Gao, Xiong;
- Shen, Chujing;
- Wang, Gang;
- He, Rujie
Publication type:
Article
Biphasic Liquid Metal Composite for Strain Sensor with High Stretchability and Sensitivity.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202400211
By:
- Chen, Ping;
- Zhou, Xiao‐Ping
Publication type:
Article
A 3D‐Printed Printhead: Custom Inkjet Dispenser for Medium Viscosity Fluids.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202400205
By:
- Raposo Pinto, Rui Miguel;
- Faraji, Mohammadmahdi;
- Vinayakumar, Kadayra Basavarajappa
Publication type:
Article
The Effect of the Iso‐Thermal Heat Treatment on the Microstructure and Properties of Powder Bed Fusion–Laser Beam AlSi10Mg Alloy.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202400202
By:
- Katti, Indrajeet;
- Zhang, Duyao;
- Qiu, Dong;
- Weiss, Matthias;
- Forsmark, Joy H.;
- Easton, Mark
Publication type:
Article
Finite‐Element Analysis Study Comparing Titanium and Polyetheretherketone Caps in a Conometric Connection between Implant and Prosthesis.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202400198
By:
- Ceddia, Mario;
- Romasco, Tea;
- Comuzzi, Luca;
- Specchiulli, Alessandro;
- Piattelli, Adriano;
- Lamberti, Luciano;
- Di Pietro, Natalia;
- Trentadue, Bartolomeo
Publication type:
Article
Antimicrobial Peptide‐Modified Liquid Metal Nanomaterials for Enhanced Antibacterial Photothermal Therapy.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202400189
By:
- Wang, Bo;
- Chen, Sen;
- Feng, Weichen;
- Shan, Xiaohui;
- Zhu, Xiyu;
- Yuan, Ruizhi;
- Cao, Yingjie;
- Fan, Linlin;
- Yuan, Bo;
- Wang, Hongzhang;
- Zhou, Gang;
- Liu, Jing
Publication type:
Article
Tribocorrosion Characteristics of Hard Anodized Al Alloys on Hydrogen Valve Application for Fuel Cell Electric Vehicles.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202400142
By:
- Shin, Dong‐Ho;
- Kim, Seong‐Jong
Publication type:
Article
Commercial Soccer Ball‐Integrated Triboelectric Nanogenerator.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202400134
By:
- Heo, Deokjae;
- Hur, Jiwoong;
- Lee, Sungjin;
- Lin, Zong‐Hong;
- Lee, Sangmin
Publication type:
Article
Compressive Property and Toughening Mechanism of Directionally Solidified Fe(Al, Ta)/Fe2Ta (Al) Eutectic Composites.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202400112
By:
- Liang, Zhanpeng;
- Cui, Chunjuan;
- Li, Wei;
- Zhang, Kai;
- Wang, Zhicong;
- Wu, Tongchao;
- Song, Yonghui;
- Su, Haijun
Publication type:
Article
Tuning Microstructure of Mesophase Pitch Carbon Fiber by Altering the Carbonization Ramp Rate.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202400110
By:
- Scherschel, Alexander;
- Harrell, Timothy;
- Sushchenko, Andriy;
- Knight, Eli;
- Brown, Kenneth R.;
- Li, Xiaodong
Publication type:
Article
Approaching 1 GPa Ultra‐High Tensile Strength in a Nanostructured Al–Zn–Mg–Cu–Zr–Sc Alloy Prepared by Severe Plastic Deformation.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202400093
By:
- Shen, Gaoliang;
- Li, Mingxi;
- Liu, Jiashuo;
- Zheng, Ruixiao;
- Xiang, Zhilei;
- Ma, Xiaozhao;
- Huang, Jingcun;
- Li, Jihao;
- Zhou, Zongyi;
- Chen, Ziyong
Publication type:
Article
Directed Instability as a Mechanism for Fabricating Multistable Twisting Microstructure.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202400070
By:
- Ben‐Abu, Ezra;
- Abramov, Yossi;
- Fine, Anthony;
- Elbaz, Shai;
- Zemah, Nadav;
- Zigelman, Anna;
- Ram, Omri;
- Gat, Amir D.
Publication type:
Article
UV‐Curable 3D‐Printable Microwave‐Absorbing Material with a Sword‐Sheath Structure Based on Multiwalled Carbon Nanotube/Polypyrrole Nanotube/Fe3O4 Composites.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202400059
By:
- Liu, Chuangji;
- Xu, Yingjie;
- Huang, Beiqing;
- Zhang, Wan;
- Zhao, Xingyu;
- Wang, Yuxin
Publication type:
Article
Effect of Cold‐Rolling Deformation on Texture Evolution and Tensile Properties of Titanium Foil for Hydrogen Fuel Cell.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202400011
By:
- Liu, Pei;
- Liu, Congxian;
- Li, Bobo;
- Wang, Zhenbo;
- Wang, Aiqin;
- Xie, Jingpei;
- Tao, Huifa;
- Wang, Fei
Publication type:
Article
Preparation, Microstructure, and Mechanical Properties of Al Matrix Composites Reinforced with High‐Entropy Alloys: A Review.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202302256
By:
- Ren, Guochun;
- Zheng, Yang;
- Zhao, Zihao;
- Xiong, Ruize;
- Zhao, Cenya;
- Yu, Zhenyang;
- Li, Liangyu
Publication type:
Article
Femtosecond Laser Carburization of WS2 Flakes to W2C for Enhanced Photothermal Conversion Efficiency.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202302222
By:
- Ullah, Farman;
- Chung, Darren;
- Ye, Fan;
- Karimi, Reza;
- Sanderson, Joseph;
- Musselman, Kevin
Publication type:
Article
Investigation of Micropattern Forming Process on Zr‐4 Alloy Surface Considering Plowing Effects.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202302167
By:
- Niu, Tong;
- Luo, Yang;
- Luo, Yuanxin;
- Peng, Bo;
- Wang, Hao
Publication type:
Article
High‐Dissolution Mechanism of Ti–48Al–2Cr–2Nb Alloy in Electrochemical Machining from a Nonlinear Dynamic Perspective.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202302083
By:
- Lin, Rong Lian;
- Li, Wen Yuan;
- Li, Ling;
- Liao, Cui Jiao
Publication type:
Article
Tensile Deformation Behaviors and Microstructure Evolution Under Various Temperatures for MAR‐M247 Nickel‐Based Superalloy.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202302056
By:
- Jiang, Yunqing;
- Zou, Tongfei;
- Liu, Meng;
- Wang, Quanyi;
- Pei, Yubing;
- Zhang, Hong;
- Liu, Yongjie;
- Wang, Qingyuan
Publication type:
Article
Freeze‐Casting of Arbitrary‐Shaped Porous Ceramics.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202301984
By:
- Zhang, Feng;
- Jia, Man;
- Wang, Jiahang;
- Xu, Mengjia;
- Wei, Chenxu;
- Li, Weidong;
- Li, Zongan
Publication type:
Article
A Comparative Study of Single and Dual Sintering Processes of Metal Nanoparticles for Flexible Electronics Application.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202301730
By:
- Chowdhury, Rajib;
- Werther, Claire;
- Young, Karl;
- Jang, Seonhee
Publication type:
Article
Bonding Wood via Cellulose Aqueous Solution as Cell Wall Adhesive.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202301719
By:
- Huang, Zhonglei;
- Cao, Zhiru;
- Huang, Dafang;
- Li, Suiyi;
- Zhu, Mingwei;
- Chen, Yanfeng
Publication type:
Article
Mechanical Properties, Energy Absorption, and Shape Memory Behavior of 3D Printed PLA‐MXene Nanocomposites and Gyroid Lattices.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202301698
By:
- Srinivas, Pooja;
- Jacob, Liya;
- Shebeeb C, Muhammed;
- Butt, Haider;
- Barsoum, Imad;
- Abu Al‐Rub, Rashid K.;
- Zaki, Wael
Publication type:
Article
Research Progress of New Generation of Aluminum–Lithium Alloys Alloying.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202301639
By:
- Xiao, Guizhi;
- An, Ru;
- Yang, Jixue;
- Ma, Jinlei
Publication type:
Article
Dual One and Two‐Photon Solvent‐Free Hybrid Photoresist for High‐Resolution and Grayscale 3D Microprinting.
Published in:
Advanced Engineering Materials, 2024, v. 26, n. 12, p. 1, doi. 10.1002/adem.202301617
By:
- Chía Gómez, Laura Piedad;
- Pitrat, Delphine;
- Bretonnière, Yann;
- Borondics, Ferenc;
- Banyasz, Akos;
- Parola, Stephane;
- Santanach Carreras, Enric
Publication type:
Article

Works matching IS 14381656 AND DT 2024 AND VI 26 AND IP 12

Dual One and Two‐Photon Solvent‐Free Hybrid Photoresist for High‐Resolution and Grayscale 3D Microprinting.

Dual One and Two‐Photon Solvent‐Free Hybrid Photoresist for High‐Resolution and Grayscale 3D Microprinting.

Masthead.

Dual One and Two‐Photon Solvent‐Free Hybrid Photoresist for High‐Resolution and Grayscale 3D Microprinting.

Polyvinylidene Fluoride Nanocomposites as Piezoelectric Nanogenerator: Properties, Fabrication and Market Applications.

Influence of Macroscale Dimension on the Electrocrystallization of Cu Pad and Redistributed Layer in Advanced Packaging.

Influence of Programming and Recovery Parameters on Compressive Behaviors of 4D‐Printed Biocompatible Polyvinyl Chloride or Vinyl–Poly(ε‐Caprolactone) Blends.

Influence of Build Height on Quality of Additively Manufactured Thermoplastic Polyurethane Parts.

Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> MXene‐Reinforced Natural Rubber Nanocomposites with Tailored Mechanical and Antiaging Properties.

Continuous Carbon Fiber Reinforced SiC Ceramic Matrix Composites by Vertical Fiber Laying Combined with Material Extrusion 3D Printing.

Biphasic Liquid Metal Composite for Strain Sensor with High Stretchability and Sensitivity.

A 3D‐Printed Printhead: Custom Inkjet Dispenser for Medium Viscosity Fluids.

The Effect of the Iso‐Thermal Heat Treatment on the Microstructure and Properties of Powder Bed Fusion–Laser Beam AlSi10Mg Alloy.

Finite‐Element Analysis Study Comparing Titanium and Polyetheretherketone Caps in a Conometric Connection between Implant and Prosthesis.

Antimicrobial Peptide‐Modified Liquid Metal Nanomaterials for Enhanced Antibacterial Photothermal Therapy.

Tribocorrosion Characteristics of Hard Anodized Al Alloys on Hydrogen Valve Application for Fuel Cell Electric Vehicles.

Commercial Soccer Ball‐Integrated Triboelectric Nanogenerator.

Compressive Property and Toughening Mechanism of Directionally Solidified Fe(Al, Ta)/Fe<sub>2</sub>Ta (Al) Eutectic Composites.

Tuning Microstructure of Mesophase Pitch Carbon Fiber by Altering the Carbonization Ramp Rate.

Approaching 1 GPa Ultra‐High Tensile Strength in a Nanostructured Al–Zn–Mg–Cu–Zr–Sc Alloy Prepared by Severe Plastic Deformation.

Directed Instability as a Mechanism for Fabricating Multistable Twisting Microstructure.

UV‐Curable 3D‐Printable Microwave‐Absorbing Material with a Sword‐Sheath Structure Based on Multiwalled Carbon Nanotube/Polypyrrole Nanotube/Fe<sub>3</sub>O<sub>4</sub> Composites.

Effect of Cold‐Rolling Deformation on Texture Evolution and Tensile Properties of Titanium Foil for Hydrogen Fuel Cell.

Preparation, Microstructure, and Mechanical Properties of Al Matrix Composites Reinforced with High‐Entropy Alloys: A Review.

Femtosecond Laser Carburization of WS<sub>2</sub> Flakes to W<sub>2</sub>C for Enhanced Photothermal Conversion Efficiency.

Investigation of Micropattern Forming Process on Zr‐4 Alloy Surface Considering Plowing Effects.

High‐Dissolution Mechanism of Ti–48Al–2Cr–2Nb Alloy in Electrochemical Machining from a Nonlinear Dynamic Perspective.

Tensile Deformation Behaviors and Microstructure Evolution Under Various Temperatures for MAR‐M247 Nickel‐Based Superalloy.

Freeze‐Casting of Arbitrary‐Shaped Porous Ceramics.

A Comparative Study of Single and Dual Sintering Processes of Metal Nanoparticles for Flexible Electronics Application.

Bonding Wood via Cellulose Aqueous Solution as Cell Wall Adhesive.

Mechanical Properties, Energy Absorption, and Shape Memory Behavior of 3D Printed PLA‐MXene Nanocomposites and Gyroid Lattices.

Research Progress of New Generation of Aluminum–Lithium Alloys Alloying.

Dual One and Two‐Photon Solvent‐Free Hybrid Photoresist for High‐Resolution and Grayscale 3D Microprinting.