Works matching IS 14381656 AND DT 2023 AND VI 25 AND IP 14

Results: 42

Pen Plotter as a Low‐Cost Platform for Rapid Device Prototyping with Solution‐Processable Nanomaterials.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202300226

By:

Ersu, Gulsum;
Sozen, Yigit;
Sánchez-Viso, Estrella;
Kuriakose, Sruthi;
Juárez, Beatriz H.;
Mompean, Federico J.;
Garcia-Hernandez, Mar;
Visscher, Lea;
Magdaleno, Alvaro J.;
Prins, Ferry;
Al-Enizi, Abdullah M.;
Nafady, Ayman;
Munuera, Carmen;
Island, Joshua O.;
Castellanos-Gomez, Andres

Publication type:

Article

Effects of Gamma Ray Radiation on the Performance of Microelectromechanical Resonators.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201837

By:

Lynes, David D.;
Chandrahalim, Hengky;
Bevins, James E.;
Petrosky, James C.

Publication type:

Article

Masthead.

Published in:: Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202370047
Publication type:: Article

Adapting Shot Peening for Surface Texturing Using Customized Additive Manufactured Shots.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201730

By:

Heydari Astaraee, Asghar;
Bagherifard, Sara;
Rajme López, Emilio Alfredo;
Guagliano, Mario

Publication type:

Article

Lower‐Voltage‐Driven Deformable Soft Electrothermal Actuators with Embedded Liquid Metal EGaIn.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202300253

By:

Zhang, Zhengyan;
Bu, Fan;
Cheng, E.;
Yang, Chao;
Zhang, Zhansheng;
Hu, Ning

Publication type:

Article

Pen Plotter as a Low‐Cost Platform for Rapid Device Prototyping with Solution‐Processable Nanomaterials.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202300226

By:

Ersu, Gulsum;
Sozen, Yigit;
Sánchez-Viso, Estrella;
Kuriakose, Sruthi;
Juárez, Beatriz H.;
Mompean, Federico J.;
Garcia-Hernandez, Mar;
Visscher, Lea;
Magdaleno, Alvaro J.;
Prins, Ferry;
Al-Enizi, Abdullah M.;
Nafady, Ayman;
Munuera, Carmen;
Island, Joshua O.;
Castellanos-Gomez, Andres

Publication type:

Article

Evaluating the Predictability of Surface Roughness of Ti–6Al–4V Alloy from Selective Laser Melting.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202300075

By:

Maitra, Varad;
Shi, Jing

Publication type:

Article

Fluidic Hardware Strategies for Powering Combined Negative‐ and Positive‐Pressure Artificial Muscles.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202300071

By:

Coutinho, Altair;
Rodrigue, Hugo

Publication type:

Article

Effect of Inorganic Nanoparticles on Energy‐Storage Properties of P(VDF–HFP)‐Based Nanocomposites.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202300070

By:

Guo, Yan;
Zhou, Di;
Li, Da;
Zhao, Weichen;
Pang, LiXia;
Shi, Zhongqi;
Liu, Wenfeng;
Su, Jinzhan;
Zhou, Tao;
Sun, Shikuan

Publication type:

Article

Fabrication of Material Extrusion‐Based Carbon Nanotubes/Zinc Oxide Core–Shell Polylactic Acid Nanocomposite Filaments for Advanced Biomedical Applications.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202300058

By:

Pottikadavath Venugopal, Ajay Kumar;
Divakaran, Nidhin;
Yohannan, Alex;
Mohapatra, Agneyarka;
Mohanty, Smita

Publication type:

Article

First‐Principles Calculations and a Theoretical Model for Predicting Stacking Fault Energies in Binary Magnesium Alloys.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202300049

By:

Qiu, Qiwen;
Song, Jun

Publication type:

Article

Reconstructed Hierarchical Pore Structure of Porous SiC Ceramics Using Micro‐X‐Ray Computed Tomography.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202300039

By:

Zhang, Ying;
Wang, Ning;
Xing, Fei;
Zhang, Junzhan;
Su, Shen;
Shi, Zongmo

Publication type:

Article

Effect of Aging on Impact Toughness and Fracture Behavior of Three Wrought Aluminum Alloys.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202300033

By:

Gong, BaiShan;
Zhang, ZhenJun;
Duan, QiQiang;
Hou, JiaPeng;
Li, RongHua;
Wang, XueGang;
Liu, HanZhong;
Cong, FuGuan;
Purcek, Gencay;
Zhang, ZheFeng

Publication type:

Article

Electrorheological Response Behavior of PANI@MoS2 Core–Shell Nanocomposites.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202300029

By:

Li, Changhao;
Chen, Yi;
Wang, Liyue;
Wang, Zishuo;
Lin, Yusheng;
Xiong, Kesi;
Wang, Baoxiang;
Hao, Chuncheng

Publication type:

Article

Achieving Excellent Strength–Ductility Combination by Austempering below Ms in 40CrNiMo Steels.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202300005

By:

Pan, Haijun;
Tao, Wenyu;
Liu, Lin;
Gao, Hongmei

Publication type:

Article

Epitaxial Growth and Stray Grain Control toward Single‐Crystal Metallic Materials by Additive Manufacturing: A Review.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201917

By:

Liu, Yang;
Shi, Jing

Publication type:

Article

Physics‐Based Machine‐Learning Approach for Modeling the Temperature‐Dependent Yield Strength of Superalloys.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201903

By:

Steingrimsson, Baldur;
Fan, Xuesong;
Adam, Benjamin;
Liaw, Peter K.

Publication type:

Article

Effect of Al–5Ti–0.3C–0.2B Master Alloy on the Structure and Properties of Ti6Al4V by Laser Solid Forming.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201895

By:

Li, Leilei;
Kang, Hao;
Yang, Haiou;
Song, Kaikai;
Gao, Lei;
Wang, Yaocen;
Bai, Xiaojun;
Lin, Xin;
Cao, Chongde

Publication type:

Article

Profilometry‐Based Indentation Plastometry for Evaluating Bulk Tensile Properties of Aluminum‐Silicon Carbide Composites.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201890

By:

John, Denny;
Paul, Tanaji;
Mohammed, Sohail M. A. K.;
Seisdedos, Gonzalo;
Boesl, Benjamin;
Agarwal, Arvind

Publication type:

Article

Shaped Photothermal Conversion Phase‐Change Materials with Excellent Electromagnetic Shielding Performance and Flame Retardancy.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201885

By:

Li, Yi-Ran;
Li, Ying-Ming;
Hu, Wen-Juan;
Wang, De-Yi

Publication type:

Article

Highly Sensitive Strain Sensor Fabricated by Direct Laser Writing on Lignin Paper with Strain Engineering.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201882

By:

Shen, Li;
Zhou, Sikun;
Gu, Baoshan;
Wang, Sha;
Wang, Shutong

Publication type:

Article

Radar Infrared‐Compatible Camouflage Performance of High‐Entropy Alloy Coating Enhanced by Double‐Layer Hexagonal Metasurface.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201861

By:

Duan, Yuping;
Chen, Wei;
Pang, Huifang;
Sun, Xingyang;
Wang, Meng;
Gong, Jian;
Wang, Jiangang

Publication type:

Article

An Experimental and Computational Modeling Study on Additively Manufactured Micro‐Architectured Ti–24Nb–4Zr–8Sn Hollow‐Strut Lattice Structures.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201850

By:

Pramanik, Sudipta;
Milaege, Dennis;
Hein, Maxwell;
Andreiev, Anatolii;
Schaper, Mirko;
Hoyer, Kay-Peter

Publication type:

Article

Gradient Origami Metamaterials for Programming Out‐of‐Plane Curvatures.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201838

By:

Hedayati, Reza;
Roudbarian, Nima;
Tahmasiyan, Sara;
Bodaghi, Mahdi

Publication type:

Article

Effects of Gamma Ray Radiation on the Performance of Microelectromechanical Resonators.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201837

By:

Lynes, David D.;
Chandrahalim, Hengky;
Bevins, James E.;
Petrosky, James C.

Publication type:

Article

Fabrication of a Porous Fe–Al Intermetallic Alloy with Ultrahigh Open Porosity.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201835

By:

Xu, Zhigang;
Wang, Weijin;
Wang, Hui;
Yang, Chao;
Shen, Qiang;
Wang, Chuanbin

Publication type:

Article

Laser‐Induced Polymerization of Photosensitive Resin for Silk Fabric Joining.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201826

By:

Li, Lei;
Zhou, Shutong;
Wu, Yongling;
Zheng, Hongyu;
Zhao, Yuanliang;
Yu, Xingjian

Publication type:

Article

Low‐Velocity Impact Response Analysis of Functionally Graded Piezoelectric Plates Using Finite‐Element Method and a Two‐Degrees‐of‐Freedom Spring‐Mass Model.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201731

By:

Mehrdad, Ehsan;
Feli, Saeid;
Das, Raj

Publication type:

Article

Adapting Shot Peening for Surface Texturing Using Customized Additive Manufactured Shots.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201730

By:

Heydari Astaraee, Asghar;
Bagherifard, Sara;
Rajme López, Emilio Alfredo;
Guagliano, Mario

Publication type:

Article

Positive Effect of Periodic Micropatterns on Compression Ring Friction.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201708

By:

Michelberger, Björn;
Schell, Frederic;
Jaitner, Dirk;
Götze, Andreas;
Leupolt, Beate;
Wetzel, Franz-Josef;
Leson, Andreas;
Lasagni, Andrés F.

Publication type:

Article

Focussed Helium Ion Beam Exposure of Polymethylmethacrylate: Positive or Negative Tone Images, Polyenes, and Fluorescent Carbon Layers.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201707

By:

Walia, Jaspreet;
Rashid, Sabaa;
Variola, Fabio;
Berini, Pierre

Publication type:

Article

A New Phenomenological Model for the Crushing Failure Mechanism Lattice Structures.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201695

By:

Alomar, Zaki;
Concli, Franco

Publication type:

Article

Cellular Automaton‐Based Modeling of Recrystallization Texture Considering Instability Criterion and Nonuniform Boundary Mobility in AA1100 Aluminum Alloy.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201687

By:

Hsiao, Shih-Chieh;
Chang, Chih-I;
Tseng, Tien-Yu;
Kuo, Jui-Chao

Publication type:

Article

Effect of Interface Friction on Surface Integrity and Microstructure during Extrusion of Pure Nickel.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201684

By:

Wang, Yanjiang;
Jia, Zhi;
Ji, Jinjin;
Heng, Yabo;
Liu, Dexue

Publication type:

Article

Influence of Radial Stiffness Gradients on Porous Composite Bulk Mechanics.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201681

By:

Abed, Melissa R.;
Archibeck, Erin S.;
Isied, Roger S.;
Feteih, Yarah;
O'Connell, Grace D.;
Gu, Grace X.

Publication type:

Article

Self‐Powered Rapid Response Flexible Pressure Sensor for Wearable Application.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201678

By:

Yin, Junwei;
Guo, Shuning;
E, Mingfeng;
Liu, Hui;
Liu, Zhihui;
Ding, Wanyu;
Li, Dongming;
Cui, Yunxian

Publication type:

Article

Design and Fabrication of a Hierarchical Structured Pressure Sensor Based on BaTiO3/PVDF Nanofibers via Near‐Field Electrospinning.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201660

By:

Kong, Haoyu;
Jin, Yuan;
Li, Guangyong;
Zhang, Minghua;
Du, Jianke

Publication type:

Article

Compositional Modifications to Alter and Suppress Laves Phases in AlxCrMoTayTi Alloys.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201614

By:

Mann, Austin E.;
Newkirk, Joseph W.

Publication type:

Article

Study of Mechanical Properties of a New 3D Re‐Entrant Lattice Auxetic Structure Under Bending.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201509

By:

Shen, Jianbang;
Zeng, Qinglei;
Wang, Jing;
Ge, Jingran;
Gao, Fuchao;
Liang, Jun

Publication type:

Article

Voxel‐Based Full‐Field Eigenstrain Reconstruction of Residual Stresses.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201502

By:

Uzun, Fatih;
Korsunsky, Alexander M.

Publication type:

Article

Additively Manufactured Mechanical Metamaterial‐Based Pressure Sensor with Tunable Sensing Properties for Stance and Motion Analysis.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201499

By:

Kim, Hang-Gyeom;
Hajra, Sugato;
Lee, Howon;
Kim, Namjung;
Kim, Hoe Joon

Publication type:

Article

Nanoscale Oxide Formation at α‐Al2O3–Nb Interfaces.

Published in:

Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201441

By:

Eusterholz, Michael K.;
Boll, Torben;
Ott, Vincent;
Stüber, Michael;
Lu, Yemao;
Gebauer, Julian;
Ulrich, Sven;
Kauffmann, Alexander;
Heilmaier, Martin

Publication type:

Article