Works matching IS 14381656 AND DT 2021 AND VI 23 AND IP 3

Results: 36

Masthead.

Published in:: Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202170010
Publication type:: Article

Wearable Aramid–Ceramic Aerogel Composite for Harsh Environment.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202001169

By:

An, Lu;
Liang, Baoshan;
Guo, Zipeng;
Wang, Jieyu;
Li, Changning;
Huang, Yulong;
Hu, Yong;
Li, Zheng;
Armstrong, Jason N.;
Zhou, Chi;
Faghihi, Danial;
Ren, Shenqiang

Publication type:

Article

All‐Printed Smart Label with Integrated Humidity Sensors and Power Supply.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202001229

By:

Pereira, Nelson;
Correia, Vitor;
Peřinka, Nikola;
Costa, Carlos M.;
Lanceros-Méndez, Senentxu

Publication type:

Article

Investigations on Oxide Particles Formed during Sintering of CrMnNi‐Transformation‐Induced Plasticity (TRIP) Steel Powder Metallurgically Materials Using Automatic Feature Analysis.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202001215

By:

Weigelt, Christian;
Kerber, Florian;
Baumgart, Christine;
Krüger, Lutz;
Aneziris, Christos G.

Publication type:

Article

The Effects of Laser‐Assisted Ultrasonic Nanocrystal Surface Modification on the Microstructure and Mechanical Properties of 300M Steel.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202001203

By:

Zhao, Weidong;
Liu, Daoxin;
Liu, Jun;
Zhang, XiaoHua;
Zhang, Hao;
Zhang, Ruixia;
Dong, Yalin;
Ye, Chang

Publication type:

Article

Wearable Aramid–Ceramic Aerogel Composite for Harsh Environment.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202001169

By:

An, Lu;
Liang, Baoshan;
Guo, Zipeng;
Wang, Jieyu;
Li, Changning;
Huang, Yulong;
Hu, Yong;
Li, Zheng;
Armstrong, Jason N.;
Zhou, Chi;
Faghihi, Danial;
Ren, Shenqiang

Publication type:

Article

Revealing Novel Power Laws and Quantization in Electrospinning Considering Jet Splitting—Toward Predicting Fiber Diameter and Its Distribution Part II Experimental.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202001161

By:

Schubert, Dirk W.;
Allen, Vincent;
Dippel, Ursula

Publication type:

Article

Zirconia Fiber Containing TRIP‐Matrix Composites Prepared via Paper‐Manufacturing Technology.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202001154

By:

Heuer, Claudia;
Brachhold, Nora;
Aneziris, Christos G.

Publication type:

Article

Thermophysical Properties of an Fe57.75Ni19.25Mo10C5B8 Glass‐Forming Alloy Measured in Microgravity.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202001143

By:

Mohr, Markus;
Hofmann, Douglas C.;
Fecht, Hans-Jörg

Publication type:

Article

Fast and High‐Throughput Synthesis of Medium‐ and High‐Entropy Alloys Using Radio Frequency Inductively Coupled Plasma.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202001116

By:

Zhu, Bo;
Alavi, Sina;
Cheng, Changjun;
Sun, Haokun;
Zhao, Hongwei;
Kim, Keun Su;
Mostaghimi, Javad;
Zou, Yu

Publication type:

Article

Ultra‐Precision Processing of Conductive Materials via Electrorheological Fluid‐Assisted Polishing.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202001109

By:

Zhao, Yunwei;
Liu, Xiaomin;
Fang, Yuhui;
Cao, Changyong

Publication type:

Article

Fatigue Behavior of Additively Manufactured IN718 with Columnar Grains.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202001031

By:

Ye, Wenye;
Akram, Javed;
Mushongera, Leslie T.

Publication type:

Article

Chemical Fabrication Strategies for Achieving Bioinspired Superhydrophobic Surfaces with Micro and Nanostructures: A Review.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202001083

By:

Xu, Shuangshuang;
Wang, Qing;
Wang, Ning

Publication type:

Article

Wettability, Diffusion Behaviors, and Modeling of Ni Nanoparticles and Nanowires in Brazing Inconel 718.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202001053

By:

Bridges, Denzel;
Nielsen, Ben;
Zhang, Lingyue;
Zhang, Suhong;
Xu, Raymond;
Hu, Anming

Publication type:

Article

Hot Deformation Behavior and Dynamic Recrystallization Nucleation Mechanisms of Inconel 625 during Hot Compressive Deformation.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202001048

By:

Jia, Zhi;
Sun, Xuan;
Ji, Jinjin;
Wang, Yanjiang;
Wei, Baolin;
Yu, Lidan

Publication type:

Article

Microstructures and Mechanical Properties of a Commercial Pure Zirconium during Rolling and Annealing at Different Temperatures.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202001039

By:

Chen, Xin;
He, Weijun;
Chen, Wenhuan;
Liu, Qing

Publication type:

Article

The Effects of Extrusion Ratio on Microstructure and Mechanical Properties of Hybrid Micron SiC and Carbon Nanotube Reinforced AZ61 Composite.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202001089

By:

Zhou, Mingyang;
Zhao, Yanli;
Liao, Nan;
Ren, Lingbao;
Lyu, Liangliang;
Quan, Gaofeng;
Gupta, Manoj

Publication type:

Article

Corrosion Resistance in NaCl Environment of Fiber Metal Laminates based on Aluminum and Titanium Alloys with Carbon and Glass Fibers.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202001030

By:

Ostapiuk, Monika;
Bieniaś, Jarosław

Publication type:

Article

Compression Behavior of Diamond Lattice Structure and Its Hall–Petch Relationship.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202001024

By:

Chen, Yefeng;
Liu, Hang;
Shen, Jiawei;
Gong, Jianming;
Zhao, Jiaxi

Publication type:

Article

Methacrylate‐Based Polymer Foams with Controllable Pore Sizes and Controllable Polydispersities via Foamed Emulsion Templating.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202001013

By:

Dabrowski, Miriam Lucia;
Stubenrauch, Cosima

Publication type:

Article

High‐Performance Al2O3/PAALi Composite Separator Prepared by Water‐Based Slurry for High‐Power Density Lithium‐Based Battery.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202001009

By:

Xu, Rong;
Sheng, Lei;
Gong, Hao;
Kong, Yulong;
Yang, Yang;
Li, Menglin;
Bai, Yaozong;
Song, Shangjun;
Liu, Gaojun;
Wang, Tao;
Huang, Xianli;
He, Jianping

Publication type:

Article

Effect of Post‐heat Treatment on the Tensile and Cryogenic Impact Toughness Properties of Inconel 718 Manufactured by Selective Laser Melting.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202001005

By:

Park, So‐Yeon;
Kim, Kyu‐Sik;
Kim, Min‐Cheol;
Kassner, Michael E.;
Lee, Kee‐Ahn

Publication type:

Article

A Novel Strategy for Constructing 3D Dislocated Chiral Metamaterial with Negative Poisson's Ratio.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202000991

By:

Zhong, Rongchang;
Zheng, Binbin;
Fu, Minghui

Publication type:

Article

Morphology and Crystallinity Amelioration of MAPbI3 Perovskite in Virtue of PbI2 Thermal Absorption Drifted Performance Enhancement in Planer n–i–p Solar Cells.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202000990

By:

Dhamaniya, Bhanu Pratap;
Kumar, Amit;
N., Ganesh;
Chhillar, Priyanka;
Ghorai, Anaranya;
Ganesan, Krishna Priya;
Puthanveettil, Suresh E.;
K. S., Narayan;
Pathak, Sandeep Kumar

Publication type:

Article

Constitutive Modeling of a Fine‐Grained Ti2AlNb‐Based Alloy Fabricated by Mechanical Alloying and Subsequent Spark Plasma Sintering.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202000987

By:

Sim, Kyong‐Ho;
Li, Yun Chol;
Li, Chun‐Ho;
Kim, Myong‐Ok;
Kim, Hyok‐Chol

Publication type:

Article

Isothermal Solid‐State Transformations of Inconel 718 Alloy Fabricated by Selective Laser Melting.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202000982

By:

Huang, Wenpu;
Wang, Zemin

Publication type:

Article

Dynamic Recrystallization and Recovery in Very High‐Power Ultrasonic Additive Manufacturing.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202000958

By:

Li, Peng;
Wang, Zhenqiang;
Diao, Mingxia;
Guo, Chunhuan;
Wang, Jiandong;
Zhao, Chengzhi;
Jiang, Fengchun

Publication type:

Article

Compressive Properties of 316L Stainless Steel Topology‐Optimized Lattice Structures Fabricated by Selective Laser Melting.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202000957

By:

Xu, Yangli;
Li, Tingting;
Cao, Xuanyang;
Tan, Yuanqiang;
Luo, Peihui

Publication type:

Article

Effects of Er Additions on the Microstructure, Mechanical Properties, and Electrical Conductivity of the Al‐0.4Fe‐0.05Si Alloy.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202000955

By:

Guo, Weichun;
Chen, Xiaohong;
Liu, Ping;
Yu, Guoliang;
Fu, Shaoli;
Fan, Jun;
Zhou, Honglei;
Liu, Hang

Publication type:

Article

Impact and Flexural Properties Studies on Carbon Fiber Reinforced Epoxy/Polycarbonate Hybrid Laminates with Different Stacking Sequence.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202000934

By:

Zhu, Hang;
Xie, Yingxi;
Yang, Binbin;
Zhang, Bole;
Liu, Xiaokang;
Lu, Longsheng

Publication type:

Article

Reinforcing the Near Eutectic Aluminum–Silicon Alloy with Graphene: An Approach toward Self‐Lubricating Composite.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202000910

By:

Singh, Harprabhjot;
Kumar, Sanjeet;
Kumar, Deepak;
Srivastav, Mayank;
Kumar, Ritesh;
Jain, Jayant;
Chouhan, Ajay;
Khatri, Om P.

Publication type:

Article

Excellent Mechanical Durability of In‐Folding Stress of Poly‐Si Thin‐Film Transistor on Plastic Substrate Compared with Out‐Folding: Generation of Gate Leakage Currents in Flexible Poly‐Si Thin‐Film Transistor by Out‐Folding and Bias‐Temperature Stress

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202000901

By:

Kim, Dongjin;
Billah, Mohammad Masum;
Lee, Suhui;
Siddik, Abu Bakar;
Cho, Young Joo;
Jang, Jin;
Lee, Jaeseob;
Lee, Yongsu;
Shin, Jiyeong

Publication type:

Article

Microstructure and Mechanical Properties of Face‐Centered‐Cubic‐Based Cr‐Free Equiatomic High‐Entropy Alloys.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202000848

By:

Liu, Xinwang;
Liu, Peng;
Zhang, Weibin;
Hu, Qiang;
Chen, Qiang;
Gao, Niu;
Tu, Zeli;
Fan, Zitian;
Liu, Gang

Publication type:

Article

Manufacturing Fe–TiC Composite Powder via Inert Gas Atomization by Forming Reinforcement Phase In Situ.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202000717

By:

Perminov, Anton;
Bartzsch, Gert;
Franke, Armin;
Biermann, Horst;
Volkova, Olena

Publication type:

Article

Laminate Squeeze Casting and Equibiaxial Bend Behavior of Carbon Fiber Fabric Reinforced Aluminum Matrix Composites.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202000657

By:

Tu, Zhiqiang;
Nganbe, Michel

Publication type:

Article

Evaluation of Processing Conditions on the γ′ Morphology of an Oxide Dispersion Strengthened Ni‐Based Superalloy.

Published in:

Advanced Engineering Materials, 2021, v. 23, n. 3, p. 1, doi. 10.1002/adem.202000559

By:

Aghamiri, S. M. S.;
Linye, Z.;
Ukai, S.;
Oono, N.;
Shahverdi, H. R.;
Soltanieh, M.

Publication type:

Article

Works matching IS 14381656 AND DT 2021 AND VI 23 AND IP 3

Masthead.

Wearable Aramid–Ceramic Aerogel Composite for Harsh Environment.

All‐Printed Smart Label with Integrated Humidity Sensors and Power Supply.

Investigations on Oxide Particles Formed during Sintering of CrMnNi‐Transformation‐Induced Plasticity (TRIP) Steel Powder Metallurgically Materials Using Automatic Feature Analysis.

The Effects of Laser‐Assisted Ultrasonic Nanocrystal Surface Modification on the Microstructure and Mechanical Properties of 300M Steel.

Wearable Aramid–Ceramic Aerogel Composite for Harsh Environment.

Revealing Novel Power Laws and Quantization in Electrospinning Considering Jet Splitting—Toward Predicting Fiber Diameter and Its Distribution Part II Experimental.

Zirconia Fiber Containing TRIP‐Matrix Composites Prepared via Paper‐Manufacturing Technology.

Thermophysical Properties of an Fe<sub>57.75</sub>Ni<sub>19.25</sub>Mo<sub>10</sub>C<sub>5</sub>B<sub>8</sub> Glass‐Forming Alloy Measured in Microgravity.

Fast and High‐Throughput Synthesis of Medium‐ and High‐Entropy Alloys Using Radio Frequency Inductively Coupled Plasma.

Ultra‐Precision Processing of Conductive Materials via Electrorheological Fluid‐Assisted Polishing.

Fatigue Behavior of Additively Manufactured IN718 with Columnar Grains.

Chemical Fabrication Strategies for Achieving Bioinspired Superhydrophobic Surfaces with Micro and Nanostructures: A Review.

Wettability, Diffusion Behaviors, and Modeling of Ni Nanoparticles and Nanowires in Brazing Inconel 718.

Hot Deformation Behavior and Dynamic Recrystallization Nucleation Mechanisms of Inconel 625 during Hot Compressive Deformation.

Microstructures and Mechanical Properties of a Commercial Pure Zirconium during Rolling and Annealing at Different Temperatures.

The Effects of Extrusion Ratio on Microstructure and Mechanical Properties of Hybrid Micron SiC and Carbon Nanotube Reinforced AZ61 Composite.

Corrosion Resistance in NaCl Environment of Fiber Metal Laminates based on Aluminum and Titanium Alloys with Carbon and Glass Fibers.

Compression Behavior of Diamond Lattice Structure and Its Hall–Petch Relationship.

Methacrylate‐Based Polymer Foams with Controllable Pore Sizes and Controllable Polydispersities via Foamed Emulsion Templating.

High‐Performance Al<sub>2</sub>O<sub>3</sub>/PAALi Composite Separator Prepared by Water‐Based Slurry for High‐Power Density Lithium‐Based Battery.

Effect of Post‐heat Treatment on the Tensile and Cryogenic Impact Toughness Properties of Inconel 718 Manufactured by Selective Laser Melting.

A Novel Strategy for Constructing 3D Dislocated Chiral Metamaterial with Negative Poisson's Ratio.

Morphology and Crystallinity Amelioration of MAPbI<sub>3</sub> Perovskite in Virtue of PbI<sub>2</sub> Thermal Absorption Drifted Performance Enhancement in Planer n–i–p Solar Cells.

Constitutive Modeling of a Fine‐Grained Ti<sub>2</sub>AlNb‐Based Alloy Fabricated by Mechanical Alloying and Subsequent Spark Plasma Sintering.

Isothermal Solid‐State Transformations of Inconel 718 Alloy Fabricated by Selective Laser Melting.

Dynamic Recrystallization and Recovery in Very High‐Power Ultrasonic Additive Manufacturing.

Compressive Properties of 316L Stainless Steel Topology‐Optimized Lattice Structures Fabricated by Selective Laser Melting.

Effects of Er Additions on the Microstructure, Mechanical Properties, and Electrical Conductivity of the Al‐0.4Fe‐0.05Si Alloy.

Impact and Flexural Properties Studies on Carbon Fiber Reinforced Epoxy/Polycarbonate Hybrid Laminates with Different Stacking Sequence.

Reinforcing the Near Eutectic Aluminum–Silicon Alloy with Graphene: An Approach toward Self‐Lubricating Composite.

Excellent Mechanical Durability of In‐Folding Stress of Poly‐Si Thin‐Film Transistor on Plastic Substrate Compared with Out‐Folding: Generation of Gate Leakage Currents in Flexible Poly‐Si Thin‐Film Transistor by Out‐Folding and Bias‐Temperature Stress

Microstructure and Mechanical Properties of Face‐Centered‐Cubic‐Based Cr‐Free Equiatomic High‐Entropy Alloys.

Manufacturing Fe–TiC Composite Powder via Inert Gas Atomization by Forming Reinforcement Phase In Situ.

Laminate Squeeze Casting and Equibiaxial Bend Behavior of Carbon Fiber Fabric Reinforced Aluminum Matrix Composites.

Evaluation of Processing Conditions on the γ′ Morphology of an Oxide Dispersion Strengthened Ni‐Based Superalloy.