Works matching IS 14381656 AND DT 2021 AND VI 23 AND IP 11
Results: 43
A Unique Quenching and Deformation Dilatometer for Combined In Situ Neutron Diffraction Analysis of Engineering Materials.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100163
- By:
- Publication type:
- Article
Ternary Nanoswitches Realized with Multiresponsive PMMA‐b‐PNIPMAM Films in Mixed Water/Acetone Vapor Atmospheres.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100191
- By:
- Publication type:
- Article
Neutrons and Synchrotron Radiation – Unique Tools for the Characterization of Materials.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202101374
- Publication type:
- Article
Stress Mapping on Ultrahigh Strength Steel Cut Edges.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202001168
- By:
- Publication type:
- Article
Local Strain Distribution in ZnO Microstructures Visualized with Scanning Nano X‐Ray Diffraction and Impact on Electrical Properties.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100201
- By:
- Publication type:
- Article
Masthead.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202170044
- Publication type:
- Article
Ternary Nanoswitches Realized with Multiresponsive PMMA‐b‐PNIPMAM Films in Mixed Water/Acetone Vapor Atmospheres.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100191
- By:
- Publication type:
- Article
Stress Mapping on Ultrahigh Strength Steel Cut Edges.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202001168
- By:
- Publication type:
- Article
A Unique Quenching and Deformation Dilatometer for Combined In Situ Neutron Diffraction Analysis of Engineering Materials.
- Published in:
- 2021
- By:
- Publication type:
- Correction Notice
High Hydrogen Mobility in an Amide–Borohydride Compound Studied by Quasielastic Neutron Scattering.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100620
- By:
- Publication type:
- Article
In Situ Investigation of the Rapid Solidification Behavior of Intermetallic γ‐TiAl‐Based Alloys Using High‐Energy X‐Ray Diffraction.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100557
- By:
- Publication type:
- Article
In Situ Synchrotron Tomography of the Solidification of an Elektron 21 Mg Alloy.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100383
- By:
- Publication type:
- Article
Characterization of LiBH<sub>4</sub>–MgH<sub>2</sub> Reactive Hydride Composite System with Scattering and Imaging Methods Using Neutron and Synchrotron Radiation.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100294
- By:
- Publication type:
- Article
Using In Situ Synchrotron‐Radiation‐Based Microtomography to Investigate 3D Structure‐Dependent Material Properties of Tension Wood.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100235
- By:
- Publication type:
- Article
Local Strain Distribution in ZnO Microstructures Visualized with Scanning Nano X‐Ray Diffraction and Impact on Electrical Properties.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100201
- By:
- Publication type:
- Article
Utilizing Synchrotron Radiation for the Characterization of Biodegradable Magnesium Alloys—From Alloy Development to the Application as Implant Material.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100197
- By:
- Publication type:
- Article
Ternary Nanoswitches Realized with Multiresponsive PMMA‐b‐PNIPMAM Films in Mixed Water/Acetone Vapor Atmospheres.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100191
- By:
- Publication type:
- Article
A Novel Approach to Robustly Determine Residual Stress in Additively Manufactured Microstructures Using Synchrotron Radiation.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100184
- By:
- Publication type:
- Article
New Insights into the Intermartensitic Transformation and Over 11% Magnetic Field‐Induced Strain in 14 m Ni−Mn−Ga Martensite.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100131
- By:
- Publication type:
- Article
In Situ Synchrotron X‐Ray Diffraction during High‐Pressure Torsion Deformation of Ni and NiTi.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100159
- By:
- Publication type:
- Article
The Effect of Chemistry and 3D Microstructural Architecture on Corrosion of Biodegradable Mg–Ca–Zn Alloys.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100157
- By:
- Publication type:
- Article
Partitioning Behavior of Nb, Ta, and Zr in Fully Lamellar γ/α<sub>2</sub> Titanium Aluminides and Its Effect on the Lattice Misfit and Creep Behavior.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100156
- By:
- Publication type:
- Article
An In Situ High‐Energy Synchrotron X‐Ray Diffraction Study of Directional Solidification in Binary TiAl Alloys.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100151
- By:
- Publication type:
- Article
A Unique Quenching and Deformation Dilatometer for Combined In Situ Neutron Diffraction Analysis of Engineering Materials.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100163
- By:
- Publication type:
- Article
Influence of Gradient Residual Stress and Tip Shape on Stress Fields Inside Indented TiN Hard Coating.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100130
- By:
- Publication type:
- Article
TaC Precipitation Kinetics During Cooling of Co−Re‐Based Alloys.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100129
- By:
- Publication type:
- Article
3D X‐Ray Diffraction Characterization of Grain Growth and Recrystallization in Rolled Braze Clad Aluminum Sheet.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100126
- By:
- Publication type:
- Article
Investigation of the Effects of Low‐Pressure Carburizing Process Parameters on Microstructural Evolution by Means of In Situ Synchrotron X‐Ray Diffraction.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100124
- By:
- Publication type:
- Article
50 Hz X‐Ray Diffraction Stress Analysis and Numerical Process Simulation at Laser Surface Line Hardening of Web Structures.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100119
- By:
- Publication type:
- Article
In Situ Observation of γ′ Phase Transformation Dynamics During Selective Laser Melting of CMSX‐4.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100112
- By:
- Publication type:
- Article
In situ Observation of Ternary Eutectic Growth in a Directionally Solidified Mo–Si–B Alloy Using High‐Energy Synchrotron X‐Rays.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100111
- By:
- Publication type:
- Article
Gaining Insight into the Deformation of Achilles Tendon Entheses in Mice.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100085
- By:
- Publication type:
- Article
Structural Effects of Electrode Proximity in Vacuum‐Deposited Organic Semiconductors Studied by Microfocused X‐Ray Scattering.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100082
- By:
- Publication type:
- Article
Suppression and Recovery of Martensitic Transformation and Magnetism in Mechanically and Thermally Treated Magnetic Shape‐Memory Ni−Mn−Ga Melt‐Spun Ribbons.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202100075
- By:
- Publication type:
- Article
In Situ High‐Energy Synchrotron X‐Ray Diffraction Reveals the Role of Texture on the Activation of Slip and Twinning during Deformation of Laser Powder Bed Fusion Ti–6Al–4V.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202001556
- By:
- Publication type:
- Article
Ex Situ Residual Stress Analysis of Chemical Vapor Deposited Diamond Coated Cutting Tools by Synchrotron X‐Ray Diffraction in Transmission Geometry.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202001525
- By:
- Publication type:
- Article
Interfacial Reactions in the Bonding Zones of Explosively Welded Tantalum to Stainless Steel Sheets.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202001521
- By:
- Publication type:
- Article
Internal Stress Evolution and Subsurface Phase Transformation in Titanium Parts Manufactured by Laser Powder Bed Fusion—An In Situ X‐Ray Diffraction Study.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202001502
- By:
- Publication type:
- Article
First‐Time Investigations on Cavitation in Rubber Parts Subjected to Constrained Tension Using In Situ Synchrotron X‐Ray Microtomography (SRμCT).
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202001347
- By:
- Publication type:
- Article
Propagation‐Based Phase Contrast Computed Tomography as a Suitable Tool for the Characterization of Spatial 3D Cell Distribution in Biomaterials.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202001188
- By:
- Publication type:
- Article
Stress Mapping on Ultrahigh Strength Steel Cut Edges.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202001168
- By:
- Publication type:
- Article
Wire and Arc Additive Manufacturing of High‐Strength Low‐Alloy Steel: Microstructure and Mechanical Properties.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202001036
- By:
- Publication type:
- Article
Exploring Structural Changes, Manufacturing, Joining, and Repair of Intermetallic γ‐TiAl‐Based Alloys: Recent Progress Enabled by In Situ Synchrotron X‐Ray Techniques.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 11, p. 1, doi. 10.1002/adem.202000947
- By:
- Publication type:
- Article