Works matching IS 14381656 AND DT 2021 AND VI 23 AND IP 10
Results: 56
3D‐Printed Acoustofluidic Devices for Raman Spectroscopy of Cells.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100552
- By:
- Publication type:
- Article
Masthead.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202170039
- Publication type:
- Article
Strong, Ultrastretchable Hydrogel‐Based Multilayered Soft Actuator Composites Enhancing Biologically Inspired Pumping Systems.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100121
- By:
- Publication type:
- Article
Highly Efficient Low‐Frequency Broadband Sound Absorption with a Composite Hybrid Metasurface.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100791
- By:
- Publication type:
- Article
Highly Efficient Low‐Frequency Broadband Sound Absorption with a Composite Hybrid Metasurface.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100791
- By:
- Publication type:
- Article
Effect of Oxygen Impurity on Thermal Conduction Rate of Polycrystalline Si<sub>3</sub>N<sub>4</sub>.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100566
- By:
- Publication type:
- Article
Highly Efficient Low‐Frequency Broadband Sound Absorption with a Composite Hybrid Metasurface.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100791
- By:
- Publication type:
- Article
A Novel Ti–6Al–4V–xSi Coating with Superior Wear and Oxidation Behavior.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100462
- By:
- Publication type:
- Article
Effect of Oxygen Impurity on Thermal Conduction Rate of Polycrystalline Si<sub>3</sub>N<sub>4</sub>.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202170037
- By:
- Publication type:
- Article
3‐Dimensional Printing of Hydrogel‐Based Nanocomposites: A Comprehensive Review on the Technology Description, Properties, and Applications.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100477
- By:
- Publication type:
- Article
Current Development on Origami/Kirigami‐Inspired Structure of Creased Patterns toward Robotics.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100473
- By:
- Publication type:
- Article
Thermally Induced Phase Transition and Defect‐Assisted Nonlinear Absorption and Optical Limiting in Nanorod Morphology V<sub>2</sub>O<sub>5</sub> Thin Films.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100468
- By:
- Publication type:
- Article
How Does Scaffold Porosity Conduct Bone Tissue Regeneration?
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100463
- By:
- Publication type:
- Article
3D‐Printed Acoustofluidic Devices for Raman Spectroscopy of Cells.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100552
- By:
- Publication type:
- Article
Upscaling the 2‐Powder Method for the Manufacturing of Heavy Rare‐Earth‐Lean Sintered didymium‐Based Magnets.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100459
- By:
- Publication type:
- Article
Laser Direct Writing of Highly Crystalline Graphene on Polydimethylsiloxane for Fingertip‐Sized Piezoelectric Sensors.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100457
- By:
- Publication type:
- Article
A Study on the Surface Integrity of 50CrMnMoVNb Spring Steels with Different Matrix Strengths Processed by Shot Peening.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100444
- By:
- Publication type:
- Article
Strategies and Applications for Improving the Stability of Black Phosphorus in Physical Environment.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100450
- By:
- Publication type:
- Article
Research on Hot Deformation Behavior of Mo‐Containing Ti<sub>2</sub>AlNb‐Based Alloy.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100449
- By:
- Publication type:
- Article
Fully Flexible, Highly Conductive Threads Based on single walled carbon nanotube (SWCNTs) and poly (3,4 ethylenedioxy thiophene) poly(styrenesulfonate) (PEDOT:PSS).
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100448
- By:
- Publication type:
- Article
Atomic Layer Deposition of Copper Metal Films from Cu(acac)<sub>2</sub> and Hydroquinone Reductant.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100446
- By:
- Publication type:
- Article
L1<sub>2</sub>‐Strengthened Co‐Rich Alloys for High‐Temperature Structural Applications: A Critical Review.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100453
- By:
- Publication type:
- Article
Preparation of SiC Nanowire/Carbon Fiber Composites with Enhanced Electromagnetic Wave Absorption Performance.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100434
- By:
- Publication type:
- Article
Direct‐Chill Casting of Large‐Scale Al–Cu Alloy Ingot Under Ultrasound: Distribution of Physical Fields and Analysis of Microstructure.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100432
- By:
- Publication type:
- Article
Novel Mg–Al–Sn–Zn–Y Alloys with Enhanced Strength−Ductility Combination Prepared by Hard‐Plate Rolling.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100419
- By:
- Publication type:
- Article
Quick Thermal Response‐Transparent‐Wearable Heater Based on Copper Mesh/Poly(Vinyl Alcohol) Film.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100395
- By:
- Publication type:
- Article
Tuning of Static and Dynamic Mechanical Response of Laser Powder Bed Fused AlSi10Mg Lattice Structures through Heat Treatments.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100418
- By:
- Publication type:
- Article
Microstructure, Magnetodielectric, and Multiferroic Properties of xCo<sub>0.8</sub>Cu<sub>0.2</sub>Fe<sub>2</sub>O<sub>4−y</sub>(0.8BaTiO<sub>3</sub>–0.2BiAlO<sub>3</sub>) Composite Ceramics.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100410
- By:
- Publication type:
- Article
Computational Screening of Single Atoms Anchored on Defective Mo<sub>2</sub>CO<sub>2</sub> MXene Nanosheet as Efficient Electrocatalysts for the Synthesis of Ammonia.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100405
- By:
- Publication type:
- Article
A Review on Thermophysical Properties for Heat Transfer Enhancement of Carbon‐Based Nanolubricant.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100403
- By:
- Publication type:
- Article
In Situ Observation of the Degradation Behavior and the Systematic Investigation of Corrosion Mechanism in AZ31 Alloy.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100396
- By:
- Publication type:
- Article
Comparative Assessment of Ionic Liquid‐Based Soft Actuators Prepared by Film Casting Versus Direct Ink Writing.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100411
- By:
- Publication type:
- Article
A Continuous MgF<sub>2</sub> Network Structure Encapsulated Mg Alloy Prepared by Selective Laser Melting for Enhanced Biodegradation Resistance.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100389
- By:
- Publication type:
- Article
Improving Mechanical Properties of GH4169 Alloys by Reversing the Deformation and Aging Sequence.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100386
- By:
- Publication type:
- Article
Nanocomposites Based on Waterborne Polyurethane Matrix and Fe<sub>3</sub>O<sub>4</sub> Nanoparticles: Synthesis and Characterization.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100381
- By:
- Publication type:
- Article
A 3D‐Printed, Sensitive, Stable, and Flexible Piezoresistive Sensor for Health Monitoring.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100379
- By:
- Publication type:
- Article
Aerogel Spring‐Back Correlates with Strain Recovery: Effect of Silica Concentration and Aging.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100376
- By:
- Publication type:
- Article
Material Flow Behavior and Microstructure Evolution During Direct Hot‐Press Bonding of Ti/Mg Laminates with Interlocking Structure.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100343
- By:
- Publication type:
- Article
Effect of Adding AlN Ceramic Particles on the Micromorphology of the Mg<sub>17</sub>Al<sub>12</sub> Phase in Magnesium Alloys.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100375
- By:
- Publication type:
- Article
Structuring BaTiO<sub>3</sub> /PDMS Nanocomposite via Dielectrophoresis for Fractional Flow Reserve Measurement.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100341
- By:
- Publication type:
- Article
Electroplating of Aerosol Jet‐Printed Silver Inks.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100362
- By:
- Publication type:
- Article
A Superhydrophobic Self‐Cleaning and Anti‐Icing Aluminum Sheet Fabricated by Alkaline Solution.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100347
- By:
- Publication type:
- Article
Wear Behavior of AlSi10Mg Alloy Produced by Laser‐Based Powder Bed Fusion and Gravity Casting.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100147
- By:
- Publication type:
- Article
Tuning Flexibility–Rigidity Conversion of Liquid Metal/Polyurethane Composites by Phase Transition for Potential Shape Memory Application.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100372
- By:
- Publication type:
- Article
Microstructure and Mechanical Properties of Mg–Er–Cu/Ni/Zn Alloys with Long Period Stacking Ordered Phases.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100368
- By:
- Publication type:
- Article
Growth, Microstructure, and Mechanical Properties of Co–Cr–Mo Crystal Fibers Fabricated from the Melt by Unidirectional Solidification.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100144
- By:
- Publication type:
- Article
Superhydrophobic Surface and Lubricant‐Infused Surface: Implementing Two Extremes on Electrodeposited NiTiO<sub>2</sub> Surface to Drive Optimal Wettability Regimes for Droplets' Multifunctional Behaviors.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100266
- By:
- Publication type:
- Article
Influence of Gas Pressure and Blowing Agent Content on the Formation of Aluminum Alloy Foam.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100242
- By:
- Publication type:
- Article
Development of Photocrosslinked Poly(glycerol dodecanedioate)—A Biodegradable Shape Memory Polymer for 3D‐Printed Tissue Engineering Applications.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100219
- By:
- Publication type:
- Article
Measuring 3D Cell Culture Viability in Multiple 3D Printed Scaffolds Within a Single Miniature Electrical Impedance Tomography Sensor.
- Published in:
- Advanced Engineering Materials, 2021, v. 23, n. 10, p. 1, doi. 10.1002/adem.202100338
- By:
- Publication type:
- Article