Works matching IS 14381656 AND DT 2020 AND VI 22 AND IP 11

Results: 38

3D‐Printed Wood‐Fiber Reinforced Architected Cellular Composites.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000565
By:
- Estakhrianhaghighi, Ehsan;
- Mirabolghasemi, Armin;
- Zhang, Yingnan;
- Lessard, Larry;
- Akbarzadeh, Abdolhamid
Publication type:
Article
The Effect of the Strain Rate on the Fretting Wear Properties of Thermally Compressed Inconel 625 Alloy.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000437
By:
- Jia, Zhi;
- Wang, Yanjiang;
- Ji, Jinjin;
- Sun, Xuan;
- Wei, Baolin
Publication type:
Article
Masthead.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202070045
Publication type:
Article
Rapid Fabrication of Sterile Medical Nasopharyngeal Swabs by Stereolithography for Widespread Testing in a Pandemic.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000759
By:
- van der Elst, Louis A.;
- Gokce Kurtoglu, Merve;
- Leffel, Troy;
- Zheng, Mengxin;
- Gumennik, Alexander
Publication type:
Article
Synthesis of a High‐Capacity NiO/Ni Foam Anode for Advanced Lithium‐Ion Batteries.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000351
By:
- Song, Youngseok;
- Hwang, Junesun;
- Lee, Sukyung;
- Thirumalraj, Balamurugan;
- Kim, Jae-Hun;
- Jenei, Péter;
- Gubicza, Jenő;
- Choe, Heeman
Publication type:
Article
Rapid Fabrication of Sterile Medical Nasopharyngeal Swabs by Stereolithography for Widespread Testing in a Pandemic.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000759
By:
- van der Elst, Louis A.;
- Gokce Kurtoglu, Merve;
- Leffel, Troy;
- Zheng, Mengxin;
- Gumennik, Alexander
Publication type:
Article
Screen‐Printed Dry Electrodes: Basic Characterization and Benchmarking.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000714
By:
- Zalar, Peter;
- Saalmink, Milan;
- Raiteri, Daniele;
- van den Brand, Jeroen;
- Smits, Edsger C. P.
Publication type:
Article
3D‐Printed Wood‐Fiber Reinforced Architected Cellular Composites.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000565
By:
- Estakhrianhaghighi, Ehsan;
- Mirabolghasemi, Armin;
- Zhang, Yingnan;
- Lessard, Larry;
- Akbarzadeh, Abdolhamid
Publication type:
Article
The Permeability of Novel Hybrid Fiber Composite Material for Use as Diesel Particulate Filters.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000562
By:
- Houston, Alastair J.;
- Boubert, Douglas;
- Clyne, Trevor William
Publication type:
Article
Microstructural Optimization of Fe‐Rich Intermetallic in Al–12 wt% Si–2 wt% Fe alloys by Adding Travelling Magnetic Fields.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000561
By:
- Luo, Lei;
- Xia, Hongying;
- Luo, Liangshun;
- Su, Yanqing;
- Wang, Liang;
- Guo, Jingjie;
- Fu, Hengzhi
Publication type:
Article
Applications of High Diffusion Resistance Multi‐component AlCrTaTiZrRu/(AlCrTaTiZrRu)N0.7 Film in Cu Interconnects.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000557
By:
- Li, Rongbin;
- Chen, Tongtong;
- Jiang, Chunxia;
- Zhang, Jing;
- Zhang, Yong;
- Liaw, Peter K.
Publication type:
Article
Review of the Design of Titanium Alloys with Low Elastic Modulus as Implant Materials.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000555
By:
- Liang, Shunxing
Publication type:
Article
Investigating Porous Media for Relief Printing Using Micro‐Architected Materials.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000548
By:
- Gallegos, Michael A.;
- Garcia, Chelsea M.;
- Schunk, Peter Randall;
- White, Benjamin C.;
- Boyce, Brad L.;
- Secor, Ethan B.;
- Kaehr, Bryan
Publication type:
Article
Insight into the Microstructure and Tensile Behavior of the W–Cu Composite Reinforced with Tungsten Fibers and Particulates.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000502
By:
- Zhuo, Longchao;
- Wang, Hailiang;
- Luo, Bin;
- Zhang, Yiheng;
- Xu, Jintao;
- Liang, Shuhua;
- Zhang, Qiqi;
- Liu, Nan;
- Sun, Jiacheng
Publication type:
Article
Tuning the Microstructure and Thickness of Ceramic Layers with Advanced Coating Technologies Using Zirconia as an Example.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000529
By:
- Guillon, Olivier;
- Dash, Apurv;
- Lenser, Christian;
- Uhlenbruck, Sven;
- Mauer, Georg
Publication type:
Article
Assessing Current‐Carrying Capacity of Aerosol Jet Printed Conductors.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000520
By:
- Alhendi, Mohammed;
- Sivasubramony, Rajesh S.;
- Weerawarne, Darshana L.;
- Iannotti, Joseph;
- Borgesen, Peter;
- Poliks, Mark D.
Publication type:
Article
Customizing the Pore Structure and Properties of Freeze‐Cast Porous Titanium by Zirconium Acetate Additive.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000519
By:
- Wu, Chuan Zong;
- Chen, Zhu Yin;
- Liu, Xinli;
- Shen, Ting;
- Zu, LiGuo;
- Zhang, Lei
Publication type:
Article
Extremely Tough Hydrogels with Cotton Fibers Reinforced.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000508
By:
- Zhang, Ran;
- Wu, Yang;
- Lin, Peng;
- Jia, Zhengfeng;
- Zhang, Yujue;
- Liu, Fengzhen;
- Yu, Bo;
- Zhou, Feng
Publication type:
Article
Deformation Behavior of Superalloy Powder Compact under Hot Isostatic Pressing.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000534
By:
- Qu, Zonghong;
- Zhang, Pingxiang;
- Liang, Shujin;
- Lai, Yunjin;
- Luo, Cheng
Publication type:
Article
Microstructural Evolution and Mechanical Properties of As‐Cast and As‐Extruded Mg–14Li Alloy with Different Zn/Y and Zn/Gd Addition.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000480
By:
- Liu, Wencai;
- Gao, Zhankui;
- Peng, Xiang;
- Wu, Guohua;
- Tong, Xin;
- Xiao, Lv;
- Wang, Xianfei;
- Ding, Wenjiang
Publication type:
Article
Optimization of Carbon Encapsulated Boron Doping for High‐Performance Bulk Sintered MgB2.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000478
By:
- Sai Srikanth, Arvapalli;
- Muralidhar, Miryala;
- Sunsanee, Pinmangkorn;
- Jirsa, Milos;
- Sakai, Naomichi;
- Oka, Tetsuo;
- Murakami, Masato
Publication type:
Article
Phase Selection, Lattice Distortions, and Mechanical Properties in High‐Entropy Alloys.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000466
By:
- Nutor, Raymond Kwesi;
- Cao, Qingping;
- Wang, Xiaodong;
- Zhang, Dongxian;
- Fang, Yunzhang;
- Zhang, Yong;
- Jiang, Jian-Zhong
Publication type:
Article
On a Highly Reproducible, Broadband Nanocomposite Ultrasonic Film Sensor Fabricated by Ultrasonic Atomization‐Assisted Spray Coating.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000462
By:
- Guan, Ruiqi;
- Zou, Fangxin;
- Weng, Zengsheng;
- Zhou, Pengyu;
- Liao, Yaozhong;
- Su, Zhongqing;
- Huang, Lin
Publication type:
Article
Comparison of Compression Performance and Energy Absorption of Lattice Structures Fabricated by Selective Laser Melting.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000453
By:
- Shi, Xin;
- Liao, Wenhe;
- Li, Peifeng;
- Zhang, Changdong;
- Liu, Tingting;
- Wang, Cong;
- Wu, Jiajing
Publication type:
Article
Effect of Hot Forging Process Parameters and Ce Addition on the Microstructure and Mechanical Properties of an As‐Forged AZ80 Alloy.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000446
By:
- Wang, Zheng;
- Wang, Jin-Guo;
- Yan, Rui-Fang;
- Zha, Min;
- Chen, Ze-Yu;
- Li, Zhu-Jin;
- Liu, Shi;
- Wei, Yong-Si;
- Wang, Xing-Kai
Publication type:
Article
The Effect of the Strain Rate on the Fretting Wear Properties of Thermally Compressed Inconel 625 Alloy.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000437
By:
- Jia, Zhi;
- Wang, Yanjiang;
- Ji, Jinjin;
- Sun, Xuan;
- Wei, Baolin
Publication type:
Article
Corrosion and Wear Study of Ni–W–B/WC Composite Coatings Electroplated by Pulse Plating.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000426
By:
- Ahmadiyeh, Somayeh;
- Rasooli, Ali;
- Hosseini, Mir Ghasem
Publication type:
Article
Robust Self‐Cleaning and Marine Anticorrosion Super‐Hydrophobic Co–Ni/CeO2 Composite Coatings.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000402
By:
- Xue, Yanpeng;
- Wang, Shuqiang;
- Xue, Yanyan;
- Cao, Lili;
- Nie, Mengyan;
- Jin, Ying
Publication type:
Article
Numerical and Experimental Analysis of Self‐Protection in Reinforced Concrete due to Application of Mg–Al–NO2 Layered Double Hydroxides.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000398
By:
- Mir, Zahid Mohammad;
- Bastos, Alexandre;
- Gomes, Celestino;
- Mueller, Urs;
- Alonso, Maria Cruz;
- Villar, Kristina;
- Rabade, Miguel P.;
- Maia, Frederico;
- Rocha, Cláudia M.;
- Mainçon, Philippe;
- Höche, Daniel;
- Ferreira, Mario G. S.;
- Zheludkevich, Mikhail L.
Publication type:
Article
Magnetite‐Decorated Reduced Graphene Oxide: A Study of Multifunctional Antibacterial and Removal of Lead Ion Properties for Water Disinfection Applications.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000395
By:
- Minitha, Cherukutty Ramakrishnan;
- Rajavel, Krishnamoorthy;
- Rajendra Kumar, Ramasamy Thangavelu
Publication type:
Article
Toward Enhanced Strength and Ductility of Al–14.5Si Alloy via Solidification Under Super‐Gravity Field.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000360
By:
- Wu, Hao;
- Wu, Chuandong;
- Lu, Yuehui;
- Jiang, Panhui;
- Gan, Zhanghua;
- Liu, Jing
Publication type:
Article
Synthesis of a High‐Capacity NiO/Ni Foam Anode for Advanced Lithium‐Ion Batteries.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000351
By:
- Song, Youngseok;
- Hwang, Junesun;
- Lee, Sukyung;
- Thirumalraj, Balamurugan;
- Kim, Jae-Hun;
- Jenei, Péter;
- Gubicza, Jenő;
- Choe, Heeman
Publication type:
Article
The Microstructure and Mechanical Properties of Multipass Friction Stir‐Welded Al/Cu Lap Joints and Interface Transfer during Butt Joining of Thick Plates.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000346
By:
- Wei, Yanni;
- Sun, Fu;
- Li, Hui;
- Peng, Xiao;
- Zou, Juntao
Publication type:
Article
Effect of Steels on the Purity of Molten Mg Alloys.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000338
By:
- Chen, Tao;
- Xiong, Xiao;
- Yuan, Yuan;
- Tang, Aitao;
- Li, Dajian;
- Atrens, Andrej;
- Pan, Fusheng
Publication type:
Article
The Refinement Effect of Alumina–Silica Sol‐Coated ZnO Particles for Cast Magnesium.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000329
By:
- Cao, Rui;
- Meng, Meng
Publication type:
Article
Fabrication and Characterization of Fe16N2 Micro‐Flake Powders and Their Extrusion‐Based 3D Printing into Permanent Magnet Form.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000311
By:
- Zirhli, Onur;
- Gunduz Akdogan, Nilay;
- Odeh, Yazan N.;
- Misirlioglu, I. Burc;
- Devlin, Eamon;
- Akdogan, Ozan
Publication type:
Article
Microstructural Characteristics and Mechanical Properties of Repaired Titanium Alloy Blade by Arc Additive Manufacturing Process.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.202000187
By:
- Liu, Yibo;
- Jin, Peng;
- Li, Junzhao;
- Lin, Tong;
- Li, Fuxiang;
- Hou, Shaojun;
- Sun, Qingjie;
- Feng, Jicai
Publication type:
Article
Amino‐Functionalized Al2O3 Particles Coating Separator with Excellent Lithium‐Ion Transport Properties for High‐Power Density Lithium‐Ion Batteries.
Published in:
Advanced Engineering Materials, 2020, v. 22, n. 11, p. 1, doi. 10.1002/adem.201901545
By:
- Zhang, Hui;
- Sheng, Lei;
- Bai, Yaozong;
- Song, Shangjun;
- Liu, Gaojun;
- Xue, Hairong;
- Wang, Tao;
- Huang, Xianli;
- He, Jianping
Publication type:
Article

Works matching IS 14381656 AND DT 2020 AND VI 22 AND IP 11

3D‐Printed Wood‐Fiber Reinforced Architected Cellular Composites.

The Effect of the Strain Rate on the Fretting Wear Properties of Thermally Compressed Inconel 625 Alloy.

Masthead.

Rapid Fabrication of Sterile Medical Nasopharyngeal Swabs by Stereolithography for Widespread Testing in a Pandemic.

Synthesis of a High‐Capacity NiO/Ni Foam Anode for Advanced Lithium‐Ion Batteries.

Rapid Fabrication of Sterile Medical Nasopharyngeal Swabs by Stereolithography for Widespread Testing in a Pandemic.

Screen‐Printed Dry Electrodes: Basic Characterization and Benchmarking.

3D‐Printed Wood‐Fiber Reinforced Architected Cellular Composites.

The Permeability of Novel Hybrid Fiber Composite Material for Use as Diesel Particulate Filters.

Microstructural Optimization of Fe‐Rich Intermetallic in Al–12 wt% Si–2 wt% Fe alloys by Adding Travelling Magnetic Fields.

Applications of High Diffusion Resistance Multi‐component AlCrTaTiZrRu/(AlCrTaTiZrRu)N<sub>0.7</sub> Film in Cu Interconnects.

Review of the Design of Titanium Alloys with Low Elastic Modulus as Implant Materials.

Investigating Porous Media for Relief Printing Using Micro‐Architected Materials.

Insight into the Microstructure and Tensile Behavior of the W–Cu Composite Reinforced with Tungsten Fibers and Particulates.

Tuning the Microstructure and Thickness of Ceramic Layers with Advanced Coating Technologies Using Zirconia as an Example.

Assessing Current‐Carrying Capacity of Aerosol Jet Printed Conductors.

Customizing the Pore Structure and Properties of Freeze‐Cast Porous Titanium by Zirconium Acetate Additive.

Extremely Tough Hydrogels with Cotton Fibers Reinforced.

Deformation Behavior of Superalloy Powder Compact under Hot Isostatic Pressing.

Microstructural Evolution and Mechanical Properties of As‐Cast and As‐Extruded Mg–14Li Alloy with Different Zn/Y and Zn/Gd Addition.

Optimization of Carbon Encapsulated Boron Doping for High‐Performance Bulk Sintered MgB<sub>2</sub>.

Phase Selection, Lattice Distortions, and Mechanical Properties in High‐Entropy Alloys.

On a Highly Reproducible, Broadband Nanocomposite Ultrasonic Film Sensor Fabricated by Ultrasonic Atomization‐Assisted Spray Coating.

Comparison of Compression Performance and Energy Absorption of Lattice Structures Fabricated by Selective Laser Melting.

Effect of Hot Forging Process Parameters and Ce Addition on the Microstructure and Mechanical Properties of an As‐Forged AZ80 Alloy.

The Effect of the Strain Rate on the Fretting Wear Properties of Thermally Compressed Inconel 625 Alloy.

Corrosion and Wear Study of Ni–W–B/WC Composite Coatings Electroplated by Pulse Plating.

Robust Self‐Cleaning and Marine Anticorrosion Super‐Hydrophobic Co–Ni/CeO<sub>2</sub> Composite Coatings.

Numerical and Experimental Analysis of Self‐Protection in Reinforced Concrete due to Application of Mg–Al–NO<sub>2</sub> Layered Double Hydroxides.

Magnetite‐Decorated Reduced Graphene Oxide: A Study of Multifunctional Antibacterial and Removal of Lead Ion Properties for Water Disinfection Applications.

Toward Enhanced Strength and Ductility of Al–14.5Si Alloy via Solidification Under Super‐Gravity Field.

Synthesis of a High‐Capacity NiO/Ni Foam Anode for Advanced Lithium‐Ion Batteries.

The Microstructure and Mechanical Properties of Multipass Friction Stir‐Welded Al/Cu Lap Joints and Interface Transfer during Butt Joining of Thick Plates.

Effect of Steels on the Purity of Molten Mg Alloys.

The Refinement Effect of Alumina–Silica Sol‐Coated ZnO Particles for Cast Magnesium.

Fabrication and Characterization of Fe<sub>16</sub>N<sub>2</sub> Micro‐Flake Powders and Their Extrusion‐Based 3D Printing into Permanent Magnet Form.

Microstructural Characteristics and Mechanical Properties of Repaired Titanium Alloy Blade by Arc Additive Manufacturing Process.

Amino‐Functionalized Al<sub>2</sub>O<sub>3</sub> Particles Coating Separator with Excellent Lithium‐Ion Transport Properties for High‐Power Density Lithium‐Ion Batteries.